- 19 Oct, 2011 5 commits
-
-
Michael Hennerich authored
No functional changes. Fix Kconfig description. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Michael Hennerich authored
Signed-off-by:
-
Lars-Peter Clausen authored
This patch adds support for the Analog Devices AD6064, AD6064-1, AD6044, AD6024 quad channel digital-to-analog converter devices. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
-
Vladimir Zapolskiy authored
According to OMAP3 TRM access to MMU registers shall be strictly 32-bit aligned. Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Acked-by:
Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by:
-
Dan Carpenter authored
The original code left it up to the user to decide how much data to copy, but that doesn't work with a fixed size array. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 18 Oct, 2011 3 commits
-
-
Greg Kroah-Hartman authored
There's a lot of unused and unneeded things in this makefile, so delete it all. Reported-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Greg Kroah-Hartman authored
There's a lot of unused and unneeded things in this makefile, so delete it all. Reported-by:
-
Greg Kroah-Hartman authored
There's a lot of unused and unneeded things in this makefile, so delete it all. Reported-by:
-
- 17 Oct, 2011 29 commits
-
-
Oren Weil authored
1) We move the AMT Watchdog to use the kernel watchdog core. the new code is still part of the MEI driver. we didn't find any good reason to extract the the MEI driver watchdog code from the MEI Driver to a new module. 2) Since the watchdog remains in the mei driver, exposing in-kernel API just for AMTHI is unnecessary. MEI new Watchdog Core Interface Patches set: https://lkml.org/lkml/2011/9/7/26 3) Code cleanup (init and probe, bug_on usage, headers and etc) was submitted in previous patches. Patches: https://lkml.org/lkml/2011/9/21/231 https://lkml.org/lkml/2011/6/15/358 https://lkml.org/lkml/2011/7/7/177 https://lkml.org/lkml/2011/9/7/38 https://lkml.org/lkml/2011/9/7/37 https://lkml.org/lkml/2011/9/7/28 4) mei.txt was updated with additional information. Patch: https://lkml.org/lkml/2011/10/16/52Acked-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Oren Weil <oren.jer.weil@intel.com> Signed-off-by:
-
Manohar Vanga authored
Signed-off-by:
Manohar Vanga <manohar.vanga@cern.ch> Cc: Martyn Welch <martyn.welch@ge.com> Reviewed-by:
Emilio G. Cota <cota@braap.org> Signed-off-by:
-
Manohar Vanga authored
Previously, the device-driver matching mechanism depended on the vme_device_id structure due to the need for a bind table per driver. This method of matching is no longer used so this patch merges the fields of struct vme_device_id into struct vme_dev. Since this also renders the slot field meaningless, it has also been removed in this patch. Signed-off-by:
-
Manohar Vanga authored
For jumper based boards (non VME64x), there is no mechanism for detecting the card that is plugged into a specific slot. This leads to issues in non-autodiscovery crates/cards when a card is plugged into a slot that is "claimed" by a different driver. In reality, there is no problem, but the driver rejects such a configuration due to its dependence on the concept of slots. This patch makes the concept of slots less critical and pushes the driver match() to individual drivers (similar to what happens in the ISA bus in driver/base/isa.c). This allows drivers to register the number of devices that they expect without any restrictions. Devices in this new model are now formatted as $driver_name-$bus_id.$device_id (as compared to the earlier vme-$bus_id.$slot_number). This model also makes the device model more logical as devices are only registered when they actually exist whereas earlier, a set of devices were being created automatically regardless of them actually being there. Another change introduced in this patch is that devices are now created within the VME driver structure rather than in the VME bridge structure. This way, things don't go haywire if the bridge driver is removed while a driver is using it. Signed-off-by:
-
Manohar Vanga authored
Instead of using a vanilla 'struct device' for VME devices, add new 'struct vme_dev'. Modifications have been made to the VME framework API as well as all in-tree VME drivers. The new vme_dev structure has the following advantages from the current model used by the driver: * Driver functions (probe, remove) now receive a VME device instead of a pointer to the bridge device (cleaner design) * It's easier to differenciate API calls as bridge-based or device-based (ie. cleaner interface). Signed-off-by: -
Jonathan Cameron authored
Very simple buffered reading. Did not provide a trigger as the sysfs trigger already meets that requirement. Signed-off-by:
-
Jonathan Cameron authored
The event generator is not very pretty but does the job and allows this driver to look a lot more like a normal driver than it otherwise would. Signed-off-by:
-
Jonathan Cameron authored
The documenation explaining how to go about writing a driver is lagging horribly, so here is another approach; an actual driver with lots of explanatory comments. Note it is currently minimal in that there are no events and no buffer. With care they can probably be added in additional files without messing up the clarity of what we have here. V2: Addressed some of Manuel Stahl's feedback. Fixed up kernel doc. Added more general description. Signed-off-by:
-
Jonathan Cameron authored
Longs are not known for being 8 bits. Signed-off-by:
-
Jonathan Cameron authored
Fix a dumb lack of consideration of the effect of combining the iio_device_unregister and iio_free_device calls into one. There is no valid place to free some of the sysfs array elements. Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
Jonathan Cameron authored
Numerous drivers either had pointless includes of gpio.h or should have been dependent on GENERIC_GPIO and were not. Conversion of ads1210 to use array registration triggered build failures that highlighted all was not well. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
-
K. Y. Srinivasan authored
Fix checkpatch warnings. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
K. Y. Srinivasan authored
Fix a checkpatch warning. Signed-off-by:
-
Paul Bolle authored
Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Seth Jennings authored
zcache_do_preload() currently does a spin_trylock() on the zcache_direct_reclaim_lock. Holding this lock intends to prevent shrink_zcache_memory() from evicting zbud pages as a result of a preload. However, it also prevents two threads from executing zcache_do_preload() at the same time. The first thread will obtain the lock and the second thread's spin_trylock() will fail (an aborted preload) causing the page to be either lost (cleancache) or pushed out to the swap device (frontswap). It also doesn't ensure that the call to shrink_zcache_memory() is on the same thread as the call to zcache_do_preload(). Additional, there is no need for this mechanism because all zcache_do_preload() calls that come down from cleancache already have PF_MEMALLOC set in the process flags which prevents direct reclaim in the memory manager. If the zcache_do_preload() call is done from the frontswap path, we _want_ reclaim to be done (which it isn't right now). This patch removes the zcache_direct_reclaim_lock and related statistics in zcache. Based on v3.1-rc8 Signed-off-by:
Seth Jennings <sjenning@linux.vnet.ibm.com> Reviewed-by:
Dave Hansen <dave@linux.vnet.ibm.com> Acked-by:
Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by:
-
Marc Dietrich authored
This fixes a compilation error in nvec.c due to the missing module.h include. Signed-off-by:
Marc Dietrich <marvin24@gmx.de> Cc: Julian Andres Klode <jak@jak-linux.org> Signed-off-by:
-
Tomas Winkler authored
timeval[0-9] were not used or used in a ready only code so we can remove them safely and so the code Signed-off-by:
-
David Kilroy authored
Setting the key management scheme is done in SIOCSIWAUTH, so no need to do anything in SIOCSIWGENIE. Fix up function name. Signed-off-by:
David Kilroy <kilroyd@googlemail.com> Signed-off-by:
-
David Kilroy authored
Handle more cases in IW_AUTH. Avoid reporting errors (invalid parameter) on operations that we can't do anything with. Return -EINPROGRESS from some operations to get wpa_supplicant to batch and commit changes. In other operations apply the changes immediately. Avoid writing WEP keys from the commit handler when WEP is not being used. Accept WPA_VERSION_DISABLED, which is received from wpa_supplicant during WEP. Signed-off-by:
-
David Kilroy authored
Share logic between encodeext and encode, so that we can handle subtle differences between them (implied set_tx), and clear the appropriate keys if you attempt to switch straight from WPA to WEP and vice versa. Also reinstate the TX buffer flush, and ensure the key index is written to the card little endian. Signed-off-by:
-
David Kilroy authored
Report the IE using the appropriate event instead of a custom one. Signed-off-by:
-
David Kilroy authored
These macros don't map to anything different. Just remove them. Signed-off-by:
-
David Kilroy authored
WPA has been disabled in the HCF layer. The firmware does support it (it is used on other platforms). Enable it so we can work through the issues. Note that we also enable this for the HERMES 2.5 non-WARP firmware cards. Signed-off-by:
-
David Kilroy authored
The function returns 0 on success and non-zero on error. So correctly record the status so it is freed appropriately. Signed-off-by:
-
Pelle Windestam authored
Fixed the checkpatch warnings in rtsx.c/.h, mostly braces and spaces before tabs issues. Also fixed warning about not using DEFINE_PCI_DEVICE_TABLE(...) macro. Signed-off-by:
Pelle Windestam <pelle@windestam.se> Signed-off-by:
-
wwang authored
Fix a bug that SDIO and SD normal card would appear simultaneously if a SDIO card inserted. Signed-off-by:
wwang <wei_wang@realsil.com.cn> Acked-by:
-
Jake Burton authored
This is a patch to the ni_atmio.c file which fixes a brace and whitespace warning found by the checkpatch.pl tool Signed-off-by:
Jake Burton <jake5991@live.com> Signed-off-by:
-
Nasir Abed authored
Fixed missing KERN_* in printk statements. Signed-off-by:
Nasir Abed <nasirabed+kernel@gmail.com> Signed-off-by:
-
- 12 Oct, 2011 3 commits
-
-
Aaro Koskinen authored
Convert the display type to enum and rename disp_state to display2. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by:
-
Aaro Koskinen authored
The driver does not need to manage CRT1 state. Signed-off-by:
-
Aaro Koskinen authored
DAC tables are read-only and can be made const. Signed-off-by:
-
