- 05 Dec, 2018 14 commits
-
-
Deepak Rawat authored
Using the new interface implement SOU plane update for BO backed fb. v2: Rebase to new resource validation. Signed-off-by:
Deepak Rawat <drawat@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Deepak Rawat authored
Using the new interface implement SOU plane update for surface backed fb. v2: Rebase to new resource validation. Signed-off-by:
-
Deepak Rawat authored
STDU primary plane now support damage clips, enable it for user-space. Signed-off-by:
-
Deepak Rawat authored
Update the comments to sync with code. Signed-off-by:
-
Deepak Rawat authored
With new interface to do plane update on STDU available, use that instead of old kms_dirty. v2: Use fence from new resource validation. Signed-off-by:
-
Deepak Rawat authored
Using the new interface implement STDU plane update for BO backed fb. v2: Rebase to new resource validation. Signed-off-by:
-
Deepak Rawat authored
Using the new interface implement STDU plane update for surface backed fb. v2: Rebase to new resource validation. Signed-off-by:
-
Deepak Rawat authored
Add a new struct vmw_du_update_plane similar to vmw_kms_dirty which represent the flow of operations needed to update a display unit from surface or bo (blit a new framebuffer). v2: - Kernel doc correction. - Rebase. v3: Rebase to new resource validation. Signed-off-by:
-
Rob Clark authored
Add an atomic helper to implement dirtyfb support. This is needed to support DSI command-mode panels with x11 userspace (ie. when we can't rely on pageflips to trigger a flush to the panel). v2: Modified the helper to use plane fb_damage_clips property and removed plane_state::dirty flag. v3: - Use uapi drm_mode_rect. - Support annotate flags. v4: Correct kernel doc. Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Deepak Rawat authored
Selftest for drm damage helper iterator functions. v2: Rebase to new test-drm_modeset. Signed-off-by:
-
Deepak Rawat authored
With fb_damage_clips blob property in drm_plane_state, this patch adds helper iterator to traverse the damage clips that lie inside plane src. Iterator will return full plane src as damage in case need full plane update or damage is not specified. v2: - Plane src clipping correction - Handle no plane update case in iter_next Signed-off-by:
-
Deepak Rawat authored
This helper function makes sure that damage from plane state is discarded for full modeset. Signed-off-by:
-
Lukasz Spintzyk authored
FB_DAMAGE_CLIPS is an optional plane property to mark damaged regions on the plane in framebuffer coordinates of the framebuffer attached to the plane. The layout of blob data is simply an array of "struct drm_mode_rect". Unlike plane src coordinates, damage clips are not in 16.16 fixed point. As plane src in framebuffer cannot be negative so are damage clips. In damage clip, x1/y1 are inclusive and x2/y2 are exclusive. This patch also exports the kernel internal drm_rect to userspace as drm_mode_rect. This is because "struct drm_clip_rect" is not sufficient to represent damage for current plane size. Driver which are interested in enabling FB_DAMAGE_CLIPS property for a plane should enable this property using drm_plane_enable_damage_clips. v2: - Input validation on damage clips against framebuffer size. - Doc update, other minor changes. Signed-off-by:
Lukasz Spintzyk <lukasz.spintzyk@displaylink.com> Signed-off-by:
-
git://git.pengutronix.de/git/pza/linuxDave Airlie authored
drm/imx: update image-convert with fixes for multi-tiled scaling Update the ipu-v3 mem2mem image-convert code, with some fixes for race conditions, alignment issues, and visual artifacts due to tile alignment and scaling factor issues when scaling images larger than hardware limitations in multiple tiles. This will allow the V4L2 mem2mem scaler driver to write output images larger than 1024x1024 pixels. Also switch drm/imx source files to SPDX license identifiers, constify struct clk_ops in imx-tve, and add a timeout warning to the busy wait in ipu_plane_disable(). Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1543835266.5647.1.camel@pengutronix.de
-
- 29 Nov, 2018 4 commits
-
-
Sean Paul authored
Fixes htmldocs build error: Error: Cannot open file ../drivers/gpu/drm/drm_global.c Fixes: 2bb42410 ("drm: Remove drm_global.{c,h} v2") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Christian König <christian.koenig@amd.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Dave Airlie authored
Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work. Signed-off-by: -
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v4.21: Core Changes: - Merge drm_info.c into drm_debugfs.c - Complete the fake drm_crtc_commit's hw_done/flip_done sooner. - Remove deprecated drm_obj_ref/unref functions. All drivers use get/put now. - Decrease stack use of drm_gem_prime_mmap. - Improve documentation for dumb callbacks. Driver Changes: - Add edid support to virtio. - Wait on implicit fence in meson and sun4i. - Add support for BGRX8888 to sun4i. - Preparation patches for sun4i driver to start supporting linear and tiled YUV formats. - Add support for HDMI 1.4 4k modes to meson, and support for VIC alternate timings. - Drop custom dumb_map in vkms. - Small fixes and cleanups to v3d. Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
R-Car DU changes for v4.21: - R8A7744 and R8A77470 support - R8A77965 LVDS support - Miscellaneous fixes Signed-off-by:
-
- 28 Nov, 2018 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Changes outside i915: - Connector property to limit max bpc (Radhakrishna) - Fix LPE audio runtime PM and deinit (Ville) - DP FEC prep work (Anusha) - Mark pinned shmemfs pages as unevictable (Kuo-Hsin) - Backmerge drm-next (Jani) Inside i915: - Revert OA UAPI change that lacks userspace (Joonas) - Register macro cleanup (Jani) - 32-bit build fixes on pin flags (Chris) - Fix MG DP mode and PHY gating for HDMI (Imre) - DP MST race, hpd and irq fixes (Lyude) - Combo PHY fixes and cleanup (Imre, Lucas) - Move display init and cleanup under modeset init and cleanup (José) - PSR fixes (José) - Subslice size fixes (Daniele) - Abstract and clean up fixed point helpers (Jani) - Plane input CSC for YUV to RGB conversion (Uma) - Break long iterations for get/put shmemfs pages (Chris) - Improve DDI encoder hw state readout sanity checks (Imre) - Fix power well leaks for MST (José) - Scaler fixes (Ville) - Watermark fixes (Ville) - Fix VLV/CHV DSI panel orientation readout (Ville) - ICL rawclock fixes (Paulo) - Workaround DMC power well request issues (Imre) - Plane allocation fix (Maarten) - Transcoder enum value/ordering robustness fixes (Imre) - UTS_RELEASE build dependency fix (Hans Holmberg) Signed-off-by:
-
- 27 Nov, 2018 21 commits
-
-
Eric Anholt authored
This is the same as the default drm_gem_dumb_map_offset() implementation, except that this one missed the ban on userspace mapping an imported dmabuf (which seems like intended common behavior for drivers). Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181126215929.20546-1-eric@anholt.netAcked-by:
-
Eric Anholt authored
The extra to_v3d_bo() calls came from copying this from the vc4 driver, which stored the cma gem object in the structs. v2: Fix an unused var warning Signed-off-by:
-
Eric Anholt authored
I merged bin and render's paths in a late refactoring. Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com>
-
Eric Anholt authored
Signed-off-by:
-
Neil Armstrong authored
This change is an attempt to handle the alternate clock for the CEA mode. 60Hz vs. 59.94Hz, 30Hz vs 29.97Hz or 24Hz vs 23.97Hz on the Amlogic Meson SoC DRM Driver pixel clock generation. The actual clock generation will be moved to the Common Clock framework once all the video clock are handled by the Amlogic Meson SoC clock driver, then these alternate timings will be handled in the same time in a cleaner fashion. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Maxime Jourdan <mjourdan@baylibre.com> [narmstrong: fix maybe-uninitialized warnings after applying] Link: https://patchwork.freedesktop.org/patch/msgid/1541501675-3928-1-git-send-email-narmstrong@baylibre.com
-
Neil Armstrong authored
Add the timings for the HDMI 1.4 4K modes support : - 3840x2160@30 - 3840x2160@25 - 3840x2160@24 Since the 297000Hz pixel clock is already managed and the modes are compatible with the HDMI 1.4 current HDMI PHY+Controller support, only the missing timings values needs to be added. Signed-off-by:
-
Daniel Vetter authored
Noticed while reviewing a patch from Eric. Also add a todo for the dumb_map_offset callbacks (it should be simple to do, but piles of work). Plus fix up vbox, because vbox. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Fabio Rafael da Rosa <fdr@pid42.net> Reviewed-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Paul Kocialkowski authored
To prepare the introduction of tiled mode support, pass the framebuffer format modifier to the helpers dealing with format support. Since only linear mode is supported for now, add corresponding checks in each helper. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Paul Kocialkowski authored
This introduces support for the BGRX8888 output format for the frontend, with its associated output format value definition. Signed-off-by:
-
Paul Kocialkowski authored
Our hardware requires the pitch to be an even number when using YUV formats with the frontend. Implement a driver-specific callback for GEM dumb allocation that sets the pitch accordingly. Since only the bpp is passed (and not the format), we cannot really distinguish if this alignment is really required. Since it doesn't hurt to align the pitch anyway, always do it. Signed-off-by:
-
Paul Kocialkowski authored
The frontend comes with two "channels", that can be configured independently. When used in YUV mode, the first channel (CH0) represents the luminance component while the second channel (CH1) represents the chrominance. In RGB mode, both have to be configured the same way. Use variables (with the YUV terminology) for each channel's dimensions, calculating the chroma dimensions from the luma dimensions and the sub-sampling factors from the format description. Since the configured size only has pixel precision, the fractional fixed-point part of the source size is dropped for both components to ensure that the scaling factors are accurate. Signed-off-by:
-
Paul Kocialkowski authored
The values in the BT601 YUV to RGB colorspace translation are not simply coded as multiples, but rather as fixed-point signed fractional values on a given number of bits. Add an explanation about that. Signed-off-by:
Paul Kocialkowski <contact@paulk.fr> Signed-off-by:
-
Paul Kocialkowski authored
This introduces support for the BGRX8888 input format for the frontend, with its associated pixel sequence value definition. Other fields are already configured correctly as they no longer depend on the format's fourcc directly. Signed-off-by:
-
Paul Kocialkowski authored
Use the number of planes associated with the DRM format to determine the input mode configuration instead of the format iteself. This way, the helper can be used for all packed formats without future changes. Signed-off-by:
-
Paul Kocialkowski authored
This introduces proper definitions for the input and output format configuration registers instead of a macro and raw values in the code, with the intent to increase code readability and reduce indirections. Signed-off-by:
-
Paul Kocialkowski authored
This introduces new helpers for retrieving the input data mode and pixel sequence register field values based on the DRM format instead of hardcoding these. This makes it easier to add support for more formats. Signed-off-by:
-
Paul Kocialkowski authored
In order to support YUV to RGB conversion with the frontend (which is generally used for connecting with the backend), the CSC block must not be bypassed. As a result, the bit to enable CSC bypass is moved from the runtime resume routine to the format update routine, so that it can disabled when introducing support for YUV formats later. Signed-off-by:
-
Paul Kocialkowski authored
Since more formats can be supported by the frontend, rename the variable listing the layer formats to avoid suggesting that the backend itself supports all the listed formats. Signed-off-by:
-
Paul Kocialkowski authored
Our hardware has a limited number of YUV planes (usually 1) that can be supported using the backend only. However, YUV planes can also be supported by the frontend and must then not be counted when checking for that limitation. Only count the YUV plane when the frontend is not used. Signed-off-by:
-
Paul Kocialkowski authored
Before this patch, it is assumed that a plane is supported either through the frontend or through the backend alone. However, the DRM interface does not allow finely reporting our hardware capabilities and there are cases where neither are support. In particular, some plane formats are supported by the backend and not the frontend, so they can only be supported without scaling. Signed-off-by:
-
Paul Kocialkowski authored
Checking that scaling is in use is not sufficient as a condition to decide to use the frontend. Since not all layer formats are supported by the frontend, we need to check for that support first. Then, the frontend must only be enabled if the backend doesn't support the format or that scaling is required. Signed-off-by:
-
