Pull drm fixes from Dave Airlie:
 "Two sets of fixes in here, one for amdgpu, and one for i915.

  The amdgpu ones are pretty small, i915's CI system seems to have a few
  problems in the last week or so, there is one major regression fix for
  fb_mmap, but there are a bunch of other issues fixed in there as well,
  oops, screen flashes and rcu related.

  amdgpu:
   - Remove experimental flag for navi14
   - Fix confusing power message failures on older VI parts
   - Hang fix for gfxoff when using the read register interface
   - Two stability regression fixes for Raven

  i915:
   - Fix kernel oops on dumb_create ioctl on no crtc situation
   - Fix bad ugly colored flash on VLV/CHV related to gamma LUT update
   - Fix unity of the frequencies reported on PMU
   - Fix kernel oops on set_page_dirty using better locks around it
   - Protect the request pointer with RCU to prevent it being freed
     while we might need still
   - Make pool objects read-only
   - Restore physical addresses for fb_map to avoid corrupted page
     table"

* tag 'drm-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/fbdev: Restore physical addresses for fb_mmap()
  Revert "drm/amd/display: enable S/G for RAVEN chip"
  drm/amdgpu: disable gfxoff on original raven
  drm/amdgpu: disable gfxoff when using register read interface
  drm/amd/powerplay: correct fine grained dpm force level setting
  drm/amd/powerplay: issue no PPSMC_MSG_GetCurrPkgPwr on unsupported ASICs
  drm/amdgpu: remove experimental flag for Navi14
  drm/i915: make pool objects read-only
  drm/i915: Protect request peeking with RCU
  drm/i915/userptr: Try to acquire the page lock around set_page_dirty()
  drm/i915/pmu: "Frequency" is reported as accumulated cycles
  drm/i915: Preload LUTs if the hw isn't currently using them
  drm/i915: Don't oops in dumb_create ioctl if we have no crtcs

Merge tag 'drm-intel-fixes-2019-11-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix kernel oops on dumb_create ioctl on no crtc situation
- Fix bad ugly colored flash on VLV/CHV related to gamma LUT update
- Fix unity of the frequencies reported on PMU
- Fix kernel oops on set_page_dirty using better locks around it
- Protect the request pointer with RCU to prevent it being freed while we might need still
- Make pool objects read-only
- Restore physical addresses for fb_map to avoid corrupted page table
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191121165339.GA23920@intel.com

Pull arm64 fix from Will Deacon:
 "Ensure PAN is re-enabled following user fault in uaccess routines.

  After I thought we were done for 5.4, we had a report this week of a
  nasty issue that has been shown to leak data between different user
  address spaces thanks to corruption of entries in the TLB. In
  hindsight, we should have spotted this in review when the PAN code was
  merged back in v4.3, but hindsight is 20/20 and I'm trying not to beat
  myself up too much about it despite being fairly miserable.

  Anyway, the fix is "obvious" but the actual failure is more more
  subtle, and is described in the commit message. I've included a fairly
  mechanical follow-up patch here as well, which moves this checking out
  into the C wrappers which is what we do for {get,put}_user() already
  and allows us to remove these bloody assembly macros entirely. The
  patches have passed kernelci [1] [2] [3] and CKI [4] tests over night,
  as well as some targetted testing [5] for this particular issue.

  The first patch is tagged for stable and should be applied to 4.14,
  4.19 and 5.3. I have separate backports for 4.4 and 4.9, which I'll
  send out once this has landed in your tree (although the original
  patch applies cleanly, it won't build for those two trees).

  Thanks to Pavel Tatashin for reporting this and Mark Rutland for
  helping to diagnose the issue and review/test the solution"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: uaccess: Remove uaccess_*_not_uao asm macros
  arm64: uaccess: Ensure PAN is re-enabled after unhandled uaccess fault

Pull block fix from Jens Axboe:
 "Just a single fix for an issue in nbd introduced in this cycle"

* tag 'for-linus-20191121' of git://git.kernel.dk/linux-block:
  nbd:fix memory leak in nbd_get_socket()

Pull GPIO fixes from Linus Walleij:
 "A last set of small fixes for GPIO, this cycle was quite busy.

   - Fix debounce delays on the MAX77620 GPIO expander

   - Use the correct unit for debounce times on the BD70528 GPIO expander

   - Get proper deps for parallel builds of the GPIO tools

   - Add a specific ACPI quirk for the Terra Pad 1061"

* tag 'gpio-v5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: acpi: Add Terra Pad 1061 to the run_edge_events_on_boot_blacklist
  tools: gpio: Correctly add make dependencies for gpio_utils
  gpio: bd70528: Use correct unit for debounce times
  gpio: max77620: Fixup debounce delays

Pull pidfd fixlet from Christian Brauner:
 "This contains a simple fix for the pidfd poll method. In the original
  patchset pidfd_poll() was made to return an unsigned int. However, the
  poll method is defined to return a __poll_t. While the unsigned int is
  not a huge deal it's just nicer to return a __poll_t.

  I've decided to send it right before the 5.4 release mainly so that
  stable doesn't need to backport it to both 5.4 and 5.3"

* tag 'for-linus-2019-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fork: fix pidfd_poll()'s return type

fbdev uses the physical address of our framebuffer for its fb_mmap()
routine. While we need to adapt this address for the new io BAR, we have
to fix v5.4 first! The simplest fix is to restore the smem back to v5.3
and we will then probably have to implement our fbops->fb_mmap() callback
to handle local memory.
Reported-by: Neil MacLeod <freedesktop@nmacleod.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112256
Fixes: 5f889b9a ("drm/i915: Disregard drm_mode_config.fb_base")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Neil MacLeod <freedesktop@nmacleod.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113180633.3947-1-chris@chris-wilson.co.uk
(cherry picked from commit abc55207)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 9faf5fa4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm-fixes-5.4-2019-11-20:

amdgpu:
- Remove experimental flag for navi14
- Fix confusing power message failures on older VI parts
- Hang fix for gfxoff when using the read register interface
- Two stability regression fixes for Raven
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120235130.23755-1-alexander.deucher@amd.com

This reverts commit 1c425915.

S/G display is not stable with the IOMMU enabled on some
platforms.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205523Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

There are still combinations of sbios and firmware that
are not stable.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204689Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

When gfxoff is enabled, accessing gfx registers via MMIO
can lead to a hang.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497Acked-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

For fine grained dpm, there is only two levels supported. However
to reflect correctly the current clock frequency, there is an
intermediate level faked. Thus on forcing level setting, we
need to treat level 2 correctly as level 1.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Otherwise, the error message prompted will confuse user.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

5.4 and newer works fine with navi14.
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It is safer and simpler to drop the uaccess assembly macros in favour of
inline C functions. Although this bloats the Image size slightly, it
aligns our user copy routines with '{get,put}_user()' and generally
makes the code a lot easier to reason about.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
[will: tweaked commit message and changed temporary variable names]
Signed-off-by: Will Deacon <will@kernel.org>

A number of our uaccess routines ('__arch_clear_user()' and
'__arch_copy_{in,from,to}_user()') fail to re-enable PAN if they
encounter an unhandled fault whilst accessing userspace.

For CPUs implementing both hardware PAN and UAO, this bug has no effect
when both extensions are in use by the kernel.

For CPUs implementing hardware PAN but not UAO, this means that a kernel
using hardware PAN may execute portions of code with PAN inadvertently
disabled, opening us up to potential security vulnerabilities that rely
on userspace access from within the kernel which would usually be
prevented by this mechanism. In other words, parts of the kernel run the
same way as they would on a CPU without PAN implemented/emulated at all.

For CPUs not implementing hardware PAN and instead relying on software
emulation via 'CONFIG_ARM64_SW_TTBR0_PAN=y', the impact is unfortunately
much worse. Calling 'schedule()' with software PAN disabled means that
the next task will execute in the kernel using the page-table and ASID
of the previous process even after 'switch_mm()', since the actual
hardware switch is deferred until return to userspace. At this point, or
if there is a intermediate call to 'uaccess_enable()', the page-table
and ASID of the new process are installed. Sadly, due to the changes
introduced by KPTI, this is not an atomic operation and there is a very
small window (two instructions) where the CPU is configured with the
page-table of the old task and the ASID of the new task; a speculative
access in this state is disastrous because it would corrupt the TLB
entries for the new task with mappings from the previous address space.

As Pavel explains:

  | I was able to reproduce memory corruption problem on Broadcom's SoC
  | ARMv8-A like this:
  |
  | Enable software perf-events with PERF_SAMPLE_CALLCHAIN so userland's
  | stack is accessed and copied.
  |
  | The test program performed the following on every CPU and forking
  | many processes:
  |
  |	unsigned long *map = mmap(NULL, PAGE_SIZE, PROT_READ|PROT_WRITE,
  |				  MAP_SHARED | MAP_ANONYMOUS, -1, 0);
  |	map[0] = getpid();
  |	sched_yield();
  |	if (map[0] != getpid()) {
  |		fprintf(stderr, "Corruption detected!");
  |	}
  |	munmap(map, PAGE_SIZE);
  |
  | From time to time I was getting map[0] to contain pid for a
  | different process.

Ensure that PAN is re-enabled when returning after an unhandled user
fault from our uaccess routines.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: 338d4f49 ("arm64: kernel: Add support for Privileged Access Never")
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
[will: rewrote commit message]
Signed-off-by: Will Deacon <will@kernel.org>

pidfd_poll() is defined as returning 'unsigned int' but the
.poll method is declared as returning '__poll_t', a bitwise type.

Fix this by using the proper return type and using the EPOLL
constants instead of the POLL ones, as required for __poll_t.

Fixes: b53b0b9d ("pidfd: add polling support")
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: stable@vger.kernel.org # 5.3
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191120003320.31138-1-luc.vanoostenryck@gmail.comSigned-off-by: Christian Brauner <christian.brauner@ubuntu.com>

In afs_wait_for_call_to_complete(), rather than immediately aborting an
operation if a signal occurs, the code attempts to wait for it to
complete, using a schedule timeout of 2*RTT (or min 2 jiffies) and a
check that we're still receiving relevant packets from the server before
we consider aborting the call.  We may even ping the server to check on
the status of the call.

However, there's a missing timeout reset in the event that we do
actually get a packet to process, such that if we then get a couple of
short stalls, we then time out when progress is actually being made.

Fix this by resetting the timeout any time we get something to process.
If it's the failure of the call then the call state will get changed and
we'll exit the loop shortly thereafter.

A symptom of this is data fetches and stores failing with EINTR when
they really shouldn't.

Fixes: bc5e3a54 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For our current users we don't expect pool objects to be writable from
the gpu.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 4f7af194 ("drm/i915: Support ro ppgtt mapped cmdparser shadow buffers")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119150154.18249-1-matthew.auld@intel.com
(cherry picked from commit d18580b0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Commit 1d463956 ("mdio_bus: Fix PTR_ERR applied after initialization
to constant") accidentally changed a check from -ENOTSUPP to -ENOSYS,
causing failures if reset controller support is not enabled.  E.g. on
r7s72100/rskrza1:

    sh-eth e8203000.ethernet: MDIO init failed: -524
    sh-eth: probe of e8203000.ethernet failed with error -524

Seen on r8a7740/armadillo, r7s72100/rskrza1, and r7s9210/rza2mevb.

Fixes: 1d463956 ("mdio_bus: Fix PTR_ERR applied after initialization to constant")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Before returning NULL, put the sock first.

Cc: stable@vger.kernel.org
Fixes: cf1b2326 ("nbd: verify socket is supported during setup")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Sun Ke <sunke32@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Since the execlists_active() is no longer protected by the
engine->active.lock, we need to protect the request pointer with RCU to
prevent it being freed as we evaluate whether or not we need to preempt.

Fixes: df403069 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104090158.2959-2-chris@chris-wilson.co.uk
(cherry picked from commit 7d148635)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 8eb4704b)
(cherry picked from commit 7e27238e149ce4f00d9cd801fe3aa0ea55e986a2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

set_page_dirty says:

	For pages with a mapping this should be done under the page lock
	for the benefit of asynchronous memory errors who prefer a
	consistent dirty state. This rule can be broken in some special
	cases, but should be better not to.

Under those rules, it is only safe for us to use the plain set_page_dirty
calls for shmemfs/anonymous memory. Userptr may be used with real
mappings and so needs to use the locked version (set_page_dirty_lock).

However, following a try_to_unmap() we may want to remove the userptr and
so call put_pages(). However, try_to_unmap() acquires the page lock and
so we must avoid recursively locking the pages ourselves -- which means
that we cannot safely acquire the lock around set_page_dirty(). Since we
can't be sure of the lock, we have to risk skip dirtying the page, or
else risk calling set_page_dirty() without a lock and so risk fs
corruption.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012
Fixes: 5cc9ed4b ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
References: cb6d7c7d ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
References: 505a8ec7 ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"")
References: 6dcc693b ("ext4: warn when page is dirtied without buffers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk
(cherry picked from commit 0d4bbe3d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit cee7fb43)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

We report "frequencies" (actual-frequency, requested-frequency) as the
number of accumulated cycles so that the average frequency over that
period may be determined by the user. This means the units we report to
the user are Mcycles (or just M), not MHz.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191109105356.5273-1-chris@chris-wilson.co.uk
(cherry picked from commit e88866ef)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit a7d87b70)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The LUTs are single buffered so in order to program them without
tearing we'd have to do it during vblank (actually to be 100%
effective it has to happen between start of vblank and frame start).
We have no proper mechanism for that at the moment so we just
defer loading them after the vblank waits have happened. That
is not quite sufficient (especially when committing multiple pipes
whose vblanks don't line up) so the LUT load will often leak into
the following frame causing tearing.

However in case the hardware wasn't previously using the LUT we
can preload it before setting the enable bit (which is double
buffered so won't tear). Let's determine if we can do such
preloading and make it happen. Slight variation between the
hardware requires some platforms specifics in the checks.

Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win
and Asus T100HA) when the gamma LUT gets loaded for the first
time as the BIOS has left some junk in the LUT memory.

v2: Deal with uapi vs. hw crtc state split
    s/GCM/CGM/ typo fix

Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 051a6d8d ("drm/i915: Move LUT programming to happen after vblank waits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.comTested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 0ccc42a2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit f7702137)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Make sure we have a crtc before probing its primary plane's
max stride. Initially I thought we can't get this far without
crtcs, but looks like we can via the dumb_create ioctl.

Not sure if we shouldn't disable dumb buffer support entirely
when we have no crtcs, but that would require some amount of work
as the only thing currently being checked is dev->driver->dumb_create
which we'd have to convert to some device specific dynamic thing.

Cc: stable@vger.kernel.org
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: aa5ca8b7 ("drm/i915: Align dumb buffer stride to 4k to allow for gtt remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106172349.11987-1-ville.syrjala@linux.intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit baea9ffe)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit aeec7661)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Pull iommu fixes from Joerg Roedel:

 - Fix for Intel IOMMU to correct invalidation commands when in SVA
   mode.

 - Update MAINTAINERS entry for Intel IOMMU

* tag 'iommu-fixes-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix QI_DEV_IOTLB_PFSID and QI_DEV_EIOTLB_PFSID macros
  MAINTAINERS: Update for INTEL IOMMU (VT-d) entry

Pull misc scheduler fixes from Ingo Molnar:

 - Fix potential deadlock under CONFIG_DEBUG_OBJECTS=y

 - PELT metrics update ordering fix

 - uclamp logic fix

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/uclamp: Fix incorrect condition
  sched/pelt: Fix update of blocked PELT ordering
  sched/core: Avoid spurious lock dependencies

Pull i2c fixes from Wolfram Sang:
 "An I2C core fix to prevent a use-after-free in a rare error path,
  and an I2C ACPI addition to work around broken HW/firmware related
  to touchscreens"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: fix use after free in of_i2c_notify
  i2c: acpi: Force bus speed to 400KHz if a Silead touchscreen is present

Pull crypto fix from Herbert Xu:
 "This reverts a number of changes to the khwrng thread which feeds the
  kernel random number pool from hwrng drivers. They were trying to fix
  issues with suspend-and-resume but ended up causing regressions"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  Revert "hwrng: core - Freeze khwrng thread during suspend"

This reverts commit 03a3bb7a ("hwrng: core - Freeze khwrng
thread during suspend"), ff296293 ("random: Support freezable
kthreads in add_hwgenerator_randomness()") and 59b56948 ("random:
Use wait_event_freezable() in add_hwgenerator_randomness()").

These patches introduced regressions and we need more time to
get them ready for mainline.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull x86 fixes from Ingo Molnar:
 "Two fixes: disable unreliable HPET on Intel Coffe Lake platforms, and
  fix a lockdep splat in the resctrl code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Fix potential lockdep warning
  x86/quirks: Disable HPET on Intel Coffe Lake platforms

Pull timer fix from Ingo Molnar:
 "Fix integer truncation bug in __do_adjtimex()"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ntp/y2038: Remove incorrect time_t truncation

Pull perf fixes from Ingo Molnar:
 "Misc fixes: a handful of AUX event handling related fixes, a Sparse
  fix and two ABI fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix missing static inline on perf_cgroup_switch()
  perf/core: Consistently fail fork on allocation failures
  perf/aux: Disallow aux_output for kernel events
  perf/core: Reattach a misplaced comment
  perf/aux: Fix the aux_output group inheritance fix
  perf/core: Disallow uncore-cgroup events

Pull networking fixes from David Miller:

 1) Fix memory leak in xfrm_state code, from Steffen Klassert.

 2) Fix races between devlink reload operations and device
    setup/cleanup, from Jiri Pirko.

 3) Null deref in NFC code, from Stephan Gerhold.

 4) Refcount fixes in SMC, from Ursula Braun.

 5) Memory leak in slcan open error paths, from Jouni Hogander.

 6) Fix ETS bandwidth validation in hns3, from Yonglong Liu.

 7) Info leak on short USB request answers in ax88172a driver, from
    Oliver Neukum.

 8) Release mem region properly in ep93xx_eth, from Chuhong Yuan.

 9) PTP config timestamp flags validation, from Richard Cochran.

10) Dangling pointers after SKB data realloc in seg6, from Andrea Mayer.

11) Missing free_netdev() in gemini driver, from Chuhong Yuan.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
  ipmr: Fix skb headroom in ipmr_get_route().
  net: hns3: cleanup of stray struct hns3_link_mode_mapping
  net/smc: fix fastopen for non-blocking connect()
  rds: ib: update WR sizes when bringing up connection
  net: gemini: add missed free_netdev
  net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
  seg6: fix skb transport_header after decap_and_validate()
  seg6: fix srh pointer in get_srh()
  net: stmmac: Use the correct style for SPDX License Identifier
  octeontx2-af: Use the correct style for SPDX License Identifier
  ptp: Extend the test program to check the external time stamp flags.
  mlx5: Reject requests to enable time stamping on both edges.
  igb: Reject requests that fail to enable time stamping on both edges.
  dp83640: Reject requests to enable time stamping on both edges.
  mv88e6xxx: Reject requests to enable time stamping on both edges.
  ptp: Introduce strict checking of external time stamp options.
  renesas: reject unsupported external timestamp flags
  mlx5: reject unsupported external timestamp flags
  igb: reject unsupported external timestamp flags
  dp83640: reject unsupported external timestamp flags
  ...

In route.c, inet_rtm_getroute_build_skb() creates an skb with no
headroom. This skb is then used by inet_rtm_getroute() which may pass
it to rt_fill_info() and, from there, to ipmr_get_route(). The later
might try to reuse this skb by cloning it and prepending an IPv4
header. But since the original skb has no headroom, skb_push() triggers
skb_under_panic():

skbuff: skb_under_panic: text:00000000ca46ad8a len:80 put:20 head:00000000cd28494e data:000000009366fd6b tail:0x3c end:0xec0 dev:veth0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:108!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 6 PID: 587 Comm: ip Not tainted 5.4.0-rc6+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
RIP: 0010:skb_panic+0xbf/0xd0
Code: 41 a2 ff 8b 4b 70 4c 8b 4d d0 48 c7 c7 20 76 f5 8b 44 8b 45 bc 48 8b 55 c0 48 8b 75 c8 41 54 41 57 41 56 41 55 e8 75 dc 7a ff <0f> 0b 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
RSP: 0018:ffff888059ddf0b0 EFLAGS: 00010286
RAX: 0000000000000086 RBX: ffff888060a315c0 RCX: ffffffff8abe4822
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88806c9a79cc
RBP: ffff888059ddf118 R08: ffffed100d9361b1 R09: ffffed100d9361b0
R10: ffff88805c68aee3 R11: ffffed100d9361b1 R12: ffff88805d218000
R13: ffff88805c689fec R14: 000000000000003c R15: 0000000000000ec0
FS:  00007f6af184b700(0000) GS:ffff88806c980000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc8204a000 CR3: 0000000057b40006 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 skb_push+0x7e/0x80
 ipmr_get_route+0x459/0x6fa
 rt_fill_info+0x692/0x9f0
 inet_rtm_getroute+0xd26/0xf20
 rtnetlink_rcv_msg+0x45d/0x630
 netlink_rcv_skb+0x1a5/0x220
 rtnetlink_rcv+0x15/0x20
 netlink_unicast+0x305/0x3a0
 netlink_sendmsg+0x575/0x730
 sock_sendmsg+0xb5/0xc0
 ___sys_sendmsg+0x497/0x4f0
 __sys_sendmsg+0xcb/0x150
 __x64_sys_sendmsg+0x48/0x50
 do_syscall_64+0xd2/0xac0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Actually the original skb used to have enough headroom, but the
reserve_skb() call was lost with the introduction of
inet_rtm_getroute_build_skb() by commit 404eb77e ("ipv4: support
sport, dport and ip_proto in RTM_GETROUTE").

We could reserve some headroom again in inet_rtm_getroute_build_skb(),
but this function shouldn't be responsible for handling the special
case of ipmr_get_route(). Let's handle that directly in
ipmr_get_route() by calling skb_realloc_headroom() instead of
skb_clone().

Fixes: 404eb77e ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch cleans-up the stray left over code. It has no
functionality impact.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

FASTOPEN does not work with SMC-sockets. Since SMC allows fallback to
TCP native during connection start, the FASTOPEN setsockopts trigger
this fallback, if the SMC-socket is still in state SMC_INIT.
But if a FASTOPEN setsockopt is called after a non-blocking connect(),
this is broken, and fallback does not make sense.
This change complements
commit cd206360 ("net/smc: avoid fallback in case of non-blocking connect")
and fixes the syzbot reported problem "WARNING in smc_unhash_sk".

Reported-by: syzbot+8488cc4cf1c9e09b8b86@syzkaller.appspotmail.com
Fixes: e1bbdd57 ("net/smc: reduce sock_put() for fallback sockets")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently WR sizes are updated from rds_ib_sysctl_max_send_wr and
rds_ib_sysctl_max_recv_wr when a connection is shut down. As a result,
a connection being down while rds_ib_sysctl_max_send_wr or
rds_ib_sysctl_max_recv_wr are updated, will not update the sizes when
it comes back up.

Move resizing of WRs to rds_ib_setup_qp so that connections will be setup
with the most current WR sizes.
Signed-off-by: Dag Moxnes <dag.moxnes@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>