Instead of blindly initializing a volume knob widget, first check
that there actually is a volume knob widget.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

A PCM capture stream on usb-audio causes a scheduling-while-atomic
BUG, as reported in the bugzilla entry below.  It's because
snd_usb_endpoint_start() is called at first at trigger START for a
capture stream, and this function contains the left-over EP
deactivation codes.  The problem doesn't happen for a playback stream
because the function is called at PCM prepare time, which can sleep.

This patch fixes the BUG by moving the EP deactivation code into the
PCM prepare callback.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46011
Cc: <stable@vger.kernel.org> [v3.5+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44541Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some Conexant devices (e g CX20590) have no mute capability on
their Beep widgets.
This patch makes sure we don't try setting mutes on those widgets.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

As spec said, 1 indicates no copyright is asserted.
Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The return value of snd_hda_param_read() is -1 for an error, otherwise
it's the supported power states of a codec.

The supported power states is a 32-bit value. Bit 31 will be set to 1
if the codec supports EPSS, thus making "sup" negative. And the bit
28:5 is reserved as "0".
So a negative value other than -1 shall be further checked.

Please refer to High-Definition spec 7.3.4.12 "Supported Power
States", thanks!
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When "Beep Playback Switch" had a different value on left and right
channels (such as muting left but not right, or vice versa), this
could result in the right channel being ignored.

This patch enables beep to be sounding from right channel only, and
also give correct result back to userspace (e g amixer).
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This function returns its own error codes instead of normal negative
error codes.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds the Intel HD Audio Device IDs for the Intel Lynx Point-LP PCH
Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When CONFIG_PM is set but CONFIG_PM_SLEEP is unset,
SIMPLE_DEV_PM_OPS() ignores the given functions, and this leads to
compile warnings.

For avoiding this, simply check CONFIG_PM_SLEEP instead of CONFIG_PM.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

To turn off pin control for the pin was tested, and helped against
this issue.

BugLink: https://bugs.launchpad.net/bugs/1034779Tested-by: Chih-Hsyuan Ho <chih.ho@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The same ID is twice in the quirk table, so the second one is not used.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Cc: <stable@vger.kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When CONFIG_SND_VERBOSE_PRINTK=y is set, the debug print in
hda_auto_parser.c looks really ugly like:

  ALSA sound/pci/hda/hda_auto_parser.c:331    mono: mono_out=0x0
  ALSA sound/pci/hda/hda_auto_parser.c:334    dig-out=0x12/0x0
  ALSA sound/pci/hda/hda_auto_parser.c:335    inputs:
  ALSA sound/pci/hda/hda_auto_parser.c:339  Mic=0x11ALSA sound/pci/hda/hda_auto_parser.c:339  Line=0x10
  ALSA sound/pci/hda/hda_auto_parser.c:341
  ALSA sound/pci/hda/hda_auto_parser.c:343    dig-in=0x13

Better to put one item at each line.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now that the auto model is the default, these quirks are redundant
and can be removed.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This computer is confirmed working with model=auto on kernel 3.2.
Also, parsing fails with hda-emu with the current model.

Cc: stable@kernel.org (3.2+)
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

As with the ThinkPad Models X230 Tablet and T530 the X230 needs a qurik to
correctly set up the pins for the dock port.
Signed-off-by: Felix Kaechele <felix@fetzig.org>
Cc: <stable@vger.kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The commit c4bfe94a causes a regression on some codecs at probing.
Since this was just a workaround to shut up a kernel warning, it'd be
better to revert and fix properly.  So we ended up with re-adding the
cleanup callback.
Tested-and-reported-by: Matt Horan <matt@matthoran.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a model/fixup string "lenovo-dock", for Thinkpad T430s, to allow
sound in docking station.

Tested on Lenovo T430s with ThinkPad Mini Dock Plus Series 3

Cc: stable@kernel.org
Signed-off-by: Philipp A. Mohrenweiser <phiamo@googlemail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When period=1, the driver tries to allocate a bit bigger buffer than
requested by the user due to the irq latency tolerance.  This may lead
to accesses over the actually allocated pages.

This patch adds a check of the page index and assigns the silent page
when it's over the given buffer size.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When the first page allocation failed for sgbuf, it leaks the records
that have been formerly allocated.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Additional updates for 3.6

A few updates for issues discovered during the merge window, the main
one being the fix for the issues with defaulting to use of regmap
without properly checking if there was I/O in place already.

Check if the chip has provided a write operation (which is mandatory for
I/O) rather than looking for control data as some of the MFDs use a global
for this. Also skip the attempt if there's no regmap available by device
in case things get confused by the attempt to default.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

Lenovo Thinkpad T530 with ALC269VC codec has a dock port but BIOS
doesn't set up the pins properly.  Enable the pins as well as on
Thinkpad X230 Tablet.
Reported-and-tested-by: Mario <anyc@hadiko.de>
Cc: <stable@vger.kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

uac_clock_source_is_valid() uses the control selector value to access
the bmControls bitmap of the clock source unit. This is wrong, as
control selector values start from 1, while the bitmap uses all
available bits.

In other words, "Clock Validity Control" is stored in D3..2, not D5..4
of the clock selector unit's bmControls.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Andreas Koch <andreas@akdesigninc.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Required for reliable power up from cold.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Since commit 38cbf959
("ASoC: core: Try to use regmap if the driver doesn't set up any I/O")
any ASoC codec which doesn't set codec::control_data is assumed
to use regmap.  That doesn't work with AC97 so this workaround
sets the codec::control_data member to a random value to restore
proper behaviour.

Tested with WM9712.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

LINE_IN also needs VAG_POWER on or we may hear noise when directly
route LINE_IN to Headphone Mux.
Tested on imx28evk.
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

If codec->control_data is not populated SoC Core assumes we want to
use regmap, which fails catastrophically, as we don't have one:

Unable to handle kernel NULL pointer dereference at virtual address 00000080
pgd = c0004000
[00000080] *pgd=00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1    Not tainted  (3.5.0-rc6-00884-g0b2419e-dirty #130)
PC is at regmap_read+0x10/0x5c
LR is at hw_read+0x80/0x90
pc : [<c01a91b8>]    lr : [<c0216804>]    psr: 60000013
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

The IDT codecs initializes the GPIO setup for mute LEDs via
snd_hda_sync_vmaster_hook().  This works in most cases except for the
very first call, which is called before PCM and control creations.
Thus before Master switch is set manually via alsactl, the mute LED
may show the wrong state, depending on the polarity.

Now it's fixed by calling the LED-status update function manually when
no vmaster is set yet.

Cc: <stable@vger.kernel.org> [v3.4+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

The commit a3e19973 made the LED working again on HP Mini 210 but
with a wrong polarity.  This patch fixes the polarity for this
machine, and also introduce a new model string "hp-inv-led".

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=772923

Cc: <stable@vger.kernel.org> [v3.3+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This will fix the following oops:

[    6.169981] genirq: Flags mismatch irq 5. 00000000 (ES1688) vs. 00000000 (ES1688)
[    6.170851] Pid: 1, comm: swapper Not tainted 3.5.0-00004-gceee0e95 #14
[    6.170851] Call Trace:
[    6.170851]  [<c1062237>] ? __setup_irq+0x3c7/0x420
[    6.170851]  [<c1062486>] ? request_threaded_irq+0x76/0x140
[    6.170851]  [<c1290220>] ? snd_es1688_ioctl+0x10/0x10
[    6.170851]  [<c10624c2>] ? request_threaded_irq+0xb2/0x140
[    6.170851]  [<c1291196>] ? snd_es1688_create+0x96/0x330
[    6.170851]  [<c138365d>] ? snd_gusextreme_probe+0x18d/0x5a2
[    6.170851]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.170851]  [<c10db22f>] ? sysfs_create_link+0xf/0x20
[    6.170851]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.170851]  [<c11d1502>] ? isa_bus_probe+0x12/0x20
[    6.170851]  [<c11c9b95>] ? driver_probe_device+0x55/0x1c0
[    6.170851]  [<c13ae04f>] ? _raw_spin_unlock+0xf/0x30
[    6.170851]  [<c13705ea>] ? klist_next+0x6a/0xe0
[    6.170851]  [<c11d15c1>] ? isa_bus_match+0x21/0x40
[    6.170851]  [<c11c8a24>] ? bus_for_each_drv+0x34/0x70
[    6.170851]  [<c11c9e4b>] ? device_attach+0x7b/0x90
[    6.170851]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.170851]  [<c11c8bff>] ? bus_probe_device+0x5f/0x80
[    6.170851]  [<c11c7493>] ? device_add+0x573/0x620
[    6.170851]  [<c1042820>] ? complete_all+0x40/0x60
[    6.170851]  [<c13ae08a>] ? _raw_spin_unlock_irqrestore+0x1a/0x30
[    6.170851]  [<c11d16c6>] ? isa_register_driver+0xb6/0x150
[    6.170851]  [<c15c9002>] ? alsa_card_gusmax_init+0xf/0xf
[    6.170851]  [<c15a99bc>] ? do_one_initcall+0x7f/0x12b
[    6.170851]  [<c15a9b7a>] ? kernel_init+0x112/0x1a9
[    6.170851]  [<c15a9423>] ? do_early_param+0x77/0x77
[    6.170851]  [<c15a9a68>] ? do_one_initcall+0x12b/0x12b
[    6.170851]  [<c13aefbe>] ? kernel_thread_helper+0x6/0xd
[    6.190170] es1688: can't grab IRQ 5
[    6.190613] genirq: Flags mismatch irq 5. 00000000 (ES1688) vs. 00000000 (ES1688)
[    6.191566] Pid: 1, comm: swapper Not tainted 3.5.0-00004-gceee0e95 #14
[    6.192394] Call Trace:
[    6.192685]  [<c1062237>] ? __setup_irq+0x3c7/0x420
[    6.193342]  [<c1062486>] ? request_threaded_irq+0x76/0x140
[    6.194081]  [<c1290220>] ? snd_es1688_ioctl+0x10/0x10
[    6.194607]  [<c10624c2>] ? request_threaded_irq+0xb2/0x140
[    6.194607]  [<c1291196>] ? snd_es1688_create+0x96/0x330
[    6.194607]  [<c138365d>] ? snd_gusextreme_probe+0x18d/0x5a2
[    6.194607]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.194607]  [<c10db22f>] ? sysfs_create_link+0xf/0x20
[    6.194607]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.194607]  [<c11d1502>] ? isa_bus_probe+0x12/0x20
[    6.194607]  [<c11c9b95>] ? driver_probe_device+0x55/0x1c0
[    6.194607]  [<c13ae04f>] ? _raw_spin_unlock+0xf/0x30
[    6.194607]  [<c13705ea>] ? klist_next+0x6a/0xe0
[    6.194607]  [<c11d15c1>] ? isa_bus_match+0x21/0x40
[    6.194607]  [<c11c8a24>] ? bus_for_each_drv+0x34/0x70
[    6.194607]  [<c11c9e4b>] ? device_attach+0x7b/0x90
[    6.194607]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.194607]  [<c11c8bff>] ? bus_probe_device+0x5f/0x80
[    6.194607]  [<c11c7493>] ? device_add+0x573/0x620
[    6.194607]  [<c1042820>] ? complete_all+0x40/0x60
[    6.194607]  [<c13ae08a>] ? _raw_spin_unlock_irqrestore+0x1a/0x30
[    6.194607]  [<c11d16c6>] ? isa_register_driver+0xb6/0x150
[    6.194607]  [<c15c9002>] ? alsa_card_gusmax_init+0xf/0xf
[    6.194607]  [<c15a99bc>] ? do_one_initcall+0x7f/0x12b
[    6.194607]  [<c15a9b7a>] ? kernel_init+0x112/0x1a9
[    6.194607]  [<c15a9423>] ? do_early_param+0x77/0x77
[    6.194607]  [<c15a9a68>] ? do_one_initcall+0x12b/0x12b
[    6.194607]  [<c13aefbe>] ? kernel_thread_helper+0x6/0xd
[    6.210779] es1688: can't grab IRQ 5
[    6.211305] gusextreme: probe of gusextreme.0 failed with error -16
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

On recent kernels, Realtek codec parser tries to optimize the routing
aggressively and take the headphone output as primary at first.  This
caused a regression on VAIO Z with ALC889, the silent output from the
speaker.

The problem seems that the speaker pin must be connected to the first
DAC (0x02) on this machine by some reason although the codec itself
advertises the flexible routing with any DACs.

This patch adds a fix-up for choosing the speaker pin as the primary
so that the right DAC is assigned on this device.
Reported-and-tested-by: Adam Williamson <awilliam@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recent fix to converter detaching timing in patch_hdmi.c
leads to a kernel WARNING due to a sanity check when the debug
option is set.  Add a workaround by setting a dummy hinfo->nid.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch add missing modules aliases to get sound working on omap devices.

Tested on Beagleboard xM rev. B.

This patch is against 3.5-rc6 vanilla.
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Signed-off-by: Mans Rullgard <mans.rullgard@linaro.org>

From 18b1ba8becc3dd256bdaad2d825f46b551debda3 Mon Sep 17 00:00:00 2001
From: Guillaume GARDET <guillaume.gardet@oliseo.fr>
Date: Tue, 10 Jul 2012 13:47:16 +0200
Subject: [PATCH] Add missing modules aliases to fix audio on omap devices
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

of_get_named_gpio() was changed to return -EPROBE_DEFER in case of
gpios not probed yet. This patch adjusts tegra_alc5632 to this.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

of_get_named_gpio() was changed to return -EPROBE_DEFER in case of
gpios not probed yet. This patch adjusts tegra_wm8903 to this.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

If codec->control_data is not provided, the following crash happens:

Unable to handle kernel NULL pointer dereference at virtual address 00000078
pgd = 80004000
[00000078] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0    Tainted: G        W     (3.5.0-next-20120725+ #1263)
PC is at regmap_read+0x18/0x64
LR is at hw_read+0x50/0x98
pc : [<802bcd90>]    lr : [<803cad18>]    psr: 60000013
...
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

The generic HDMI code detaches the converter from the stream when
unused, but it must be done rather in the close callback instead of
the cleanup callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Thought to be another merge error, board-mop500-msp.h has never existed
in the upstream kernel, only msp.h. This patch changes the include files
to match the existing file name.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>