Doing this probing inside of the Makefiles means we have a maze of
ifdefs inside the source code and child Makefiles that need to make
proper decisions on this too. Instead, we do it at Kconfig time, like
many other compiler and assembler options, which allows us to set up the
dependencies normally for full compilation units. In the process, the
ADX test changes to use %eax instead of %r10 so that it's valid in both
32-bit and 64-bit mode.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

CONFIG_AS_MOVNTDQA was introduced by commit 0b1de5d5 ("drm/i915:
Use SSE4.1 movntdqa to accelerate reads from WC memory").

We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35 ("kbuild: Raise the minimum
required binutils version to 2.21").

I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.

Remove CONFIG_AS_MOVNTDQA, which is always defined.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>

CONFIG_AS_AVX was introduced by commit ea4d26ae ("raid5: add AVX
optimized RAID5 checksumming").

We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35 ("kbuild: Raise the minimum
required binutils version to 2.21").

I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.

Remove CONFIG_AS_AVX, which is always defined.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>

CONFIG_AS_SSSE3 was introduced by commit 75aaf4c3 ("x86/raid6:
correctly check for assembler capabilities").

We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35 ("kbuild: Raise the minimum
required binutils version to 2.21").

I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.

Remove CONFIG_AS_SSSE3, which is always defined.

I added ifdef CONFIG_X86 to lib/raid6/algos.c to avoid link errors
on non-x86 architectures.

lib/raid6/algos.c is built not only for the kernel but also for
testing the library code from userspace. I added -DCONFIG_X86 to
lib/raid6/test/Makefile to cator to this usecase.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>

CONFIG_AS_CFI_SECTIONS was introduced by commit 9e565292 ("x86:
Use .cfi_sections for assembly code").

We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35 ("kbuild: Raise the minimum
required binutils version to 2.21").

I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.

Remove CONFIG_AS_CFI_SECTIONS, which is always defined.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>

Commit 131484c8 ("x86/debug: Remove perpetually broken,
unmaintainable dwarf annotations") removes all the users of
CFI_SIGNAL_FRAME.

Remove the CFI_SIGNAL_FRAME and CONFIG_AS_CFI_SIGNAL_FRAME.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>

CONFIG_AS_CFI was introduced by commit e2414910 ("[PATCH] x86:
Detect CFI support in the assembler at runtime"), and extended by
commit f0f12d85 ("x86_64: Check for .cfi_rel_offset in CFI probe").

We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35 ("kbuild: Raise the minimum
required binutils version to 2.21").

I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.

Remove CONFIG_AS_CFI, which is always defined.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>

This header file has the following check at the top:

  #ifndef __ASSEMBLY__
  #warning "asm/dwarf2.h should be only included in pure assembly files"
  #endif

So, we expect defined(__ASSEMBLY__) is always true.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>

You can build a user-space test program for the raid6 library code,
like this:

  $ cd lib/raid6/test
  $ make

The command in $(shell ...) function is evaluated by /bin/sh by default.
(or, you can specify the shell by passing SHELL=<shell> from command line)

Currently '>&/dev/null' is used to sink both stdout and stderr. Because
this code is bash-ism, it only works when /bin/sh is a symbolic link to
bash (this is the case on RHEL etc.)

This does not work on Ubuntu where /bin/sh is a symbolic link to dash.

I see lots of

  /bin/sh: 1: Syntax error: Bad fd number

and

  warning "your version of binutils lacks ... support"

Replace it with portable '>/dev/null 2>&1'.

Fixes: 4f8c55c5 ("lib/raid6: build proper files on corresponding arch")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

These are listed in include/uapi/asm-generic/Kbuild, so Kbuild will
automatically generate them.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

These types should be defined in posix_types.h, not in bitsperlong.h .

With these defines moved, h8300-specific bitsperlong.h is no longer
needed since Kbuild will automatically create a wrapper of
include/uapi/asm-generic/bitsperlong.h
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

__builtin_constant_p(nr) is used everywhere now. It does not make
much sense to define IS_IMMEDIATE() as its alias.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pull drm fixes from Dave Airlie:
 "This is a set of fixes that have queued up, I think I might have
  another pull with some more before rc1 but I'd like to dequeue what I
  have now just in case Easter is more eggciting that expected.

  The main thing in here is a fix for a longstanding nouveau power
  management issues on certain laptops, it should help runtime
  suspend/resume for a lot of people.

  There is also a reverted patch for some drm_mm behaviour in atomic
  contexts.

  Summary:

  core:
   - revert drm_mm atomic patch
   - dt binding fixes

  fbcon:
   - null ptr error fix

  i915:
   - GVT fixes

  nouveau:
   - runpm fix
   - svm fixes

  amdgpu:
   - HDCP fixes
   - gfx10 fix
   - Misc display fixes
   - BACO fixes

  amdkfd:
   - Fix memory leak

  vboxvideo:
   - remove conflicting fbs

  vc4:
   - mode validation fix

  xen:
   - fix PTR_ERR usage"

* tag 'drm-next-2020-04-08' of git://anongit.freedesktop.org/drm/drm: (41 commits)
  drm/nouveau/kms/nv50-: wait for FIFO space on PIO channels
  drm/nouveau/nvif: protect waits against GPU falling off the bus
  drm/nouveau/nvif: access PTIMER through usermode class, if available
  drm/nouveau/gr/gp107,gp108: implement workaround for HW hanging during init
  drm/nouveau: workaround runpm fail by disabling PCI power management on certain intel bridges
  drm/nouveau/svm: remove useless SVM range check
  drm/nouveau/svm: check for SVM initialized before migrating
  drm/nouveau/svm: fix vma range check for migration
  drm/nouveau: remove checks for return value of debugfs functions
  drm/nouveau/ttm: evict other IO mappings when running out of BAR1 space
  drm/amdkfd: kfree the wrong pointer
  drm/amd/display: increase HDCP authentication delay
  drm/amd/display: Correctly cancel future watchdog and callback events
  drm/amd/display: Don't try hdcp1.4 when content_type is set to type1
  drm/amd/powerplay: move the ASIC specific nbio operation out of smu_v11_0.c
  drm/amd/powerplay: drop redundant BIF doorbell interrupt operations
  drm/amd/display: Fix dcn21 num_states
  drm/amd/display: Enable BT2020 in COLOR_ENCODING property
  drm/amd/display: LFC not working on 2.0x range monitors (v2)
  drm/amd/display: Support plane level CTM
  ...

Pull input updates from Dmitry Torokhov:
 "An update to the Goodix touchscreen driver to enable it work properly
  on various Bay Trail and Cherry Trail devices, and a few other
  assorted changes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits)
  Input: update SPDX tag for input-event-codes.h
  Input: i8042 - add Acer Aspire 5738z to nomux list
  Input: goodix - fix compilation when ACPI support is disabled
  dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema
  Input: of_touchscreen - explicitly choose axis
  Input: goodix - support gt9147 touchpanel
  dt-bindings: touchscreen: goodix: support of gt9147
  Input: goodix - add support for Goodix GT917S
  Input: goodix - use string-based chip ID
  dt-bindings: input: touchscreen: add compatible string for Goodix GT917S
  Input: goodix - add support for more then one touch-key
  Input: goodix - fix spurious key release events
  Input: goodix - try to reset the controller if the i2c-test fails
  Input: goodix - restore config on resume if necessary
  Input: goodix - make goodix_send_cfg() take a raw buffer as argument
  Input: goodix - add minimum firmware size check
  Input: goodix - save a copy of the config from goodix_read_config()
  Input: goodix - move defines to above struct goodix_ts_data declaration
  Input: goodix - add support for controlling the IRQ pin through ACPI methods
  Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devices
  ...

Pull thermal updates from Daniel Lezcano:

 - Convert tsens configuration DT binding to yaml (Rajeshwari)

 - Add interrupt support on the rcar sensor (Niklas Söderlund)

 - Add a new Spreadtrum thermal driver (Baolin Wang)

 - Add thermal binding for the fsl scu board, a new API to retrieve the
   sensor id bound to the thermal zone and i.MX system controller sensor
   (Anson Huang))

 - Remove warning log when a deferred probe is requested on Exynos
   (Marek Szyprowski)

 - Add the thermal monitoring unit support for imx8mm with its DT
   bindings (Anson Huang)

 - Rephrase the Kconfig text for clarity (Linus Walleij)

 - Use the gpio descriptor for the ti-soc-thermal (Linus Walleij)

 - Align msg structure to 4 bytes for i.MX SC, fix the Kconfig
   dependency, add the __may_be unused annotation for PM functions and
   the COMPILE_TEST option for imx8mm (Anson Huang)

 - Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang)

 - Add DT binding and support for the rcar gen3 r8a77961 and improve the
   error path on the rcar init function (Niklas Söderlund)

 - Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria)

 - Improve code by removing lock and caching values in the rcar thermal
   sensor (Niklas Söderlund)

 - Cleanup in the qoriq drivers and add a call to
   imx_thermal_unregister_legacy_cooling in the removal function (Anson
   Huang)

 - Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob
   Herring)

 - Change the thermal DT bindings by making the cooling-maps optional
   (Yuantian Tang)

 - Add Tiger Lake support (Sumeet Pawnikar)

 - Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai)

 - Make pkg_temp_lock a raw_spinlock_t(Clark Williams)

 - Fix incorrect data types by changing them to signed on i.MX SC (Anson
   Huang)

 - Replace zero-length array with flexible-array member (Gustavo A. R.
   Silva)

 - Add support for i.MX8MP in the driver and in the DT bindings (Anson
   Huang)

 - Fix return value of the cpufreq_set_cur_state() function (Willy
   Wolff)

 - Remove abusing and scary WARN_ON in the cpufreq cooling device
   (Daniel Lezcano)

 - Fix build warning of incorrect argument type reported by sparse on
   imx8mm (Anson Huang)

 - Fix stub for the devfreq cooling device (Martin Blumenstingl)

 - Fix cpu idle cooling documentation (Sergey Vidishev)

* tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (52 commits)
  Documentation: cpu-idle-cooling: Fix diagram for 33% duty cycle
  thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n
  thermal: imx8mm: Fix build warning of incorrect argument type
  thermal/drivers/cpufreq_cooling: Remove abusing WARN_ON
  thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state
  thermal: imx8mm: Add i.MX8MP support
  dt-bindings: thermal: imx8mm-thermal: Add support for i.MX8MP
  thermal: qcom: tsens.h: Replace zero-length array with flexible-array member
  thermal: imx_sc_thermal: Fix incorrect data type
  thermal: int340x_thermal: Use scnprintf() for avoiding potential buffer overflow
  thermal: int340x: processor_thermal: Add Tiger Lake support
  thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
  dt-bindings: thermal: make cooling-maps property optional
  dt-bindings: thermal: qcom-tsens: Remove redundant 'maxItems'
  dt-bindings: thermal: sprd: Remove redundant 'maxItems'
  thermal: imx: Calling imx_thermal_unregister_legacy_cooling() in .remove
  thermal: qoriq: Sort includes alphabetically
  thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups
  thermal: rcar_thermal: Remove lock in rcar_thermal_get_current_temp()
  thermal: rcar_thermal: Do not store ctemp in rcar_thermal_priv
  ...

Pull mfd updates from Lee Jones:
 "New Drivers:
   - Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors

  New Device Support:
   - Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC
   - Add support for Comet Lake to Intel LPSS

  New Functionality:
   - Add support for Charger Detection to Spreadtrum SC27xx PMICs
   - Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC
   - Add ACPI enumeration support to Diolan DLN2 USB Adaptor

  Fix-ups:
   - Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847
   - I2C registration; rn5t618
   - Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1
   - Use flexible-array members; omap-usb-tll, qcom-pm8xxx
   - Remove unnecessary casts; omap-usb-host, omap-usb-tll
   - Power (suspend/resume/poweroff) enhancements; rk808
   - Improve error/sanity checking; dln2
   - Use snprintf(); aat2870-core

  Bug Fixes:
   - Fix PCI IDs in intel-lpss-pci"

* tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits)
  mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock
  mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow
  mfd: dln2: Allow to be enumerated via ACPI
  mfd: da9062: Add support for interrupt polarity defined in device tree
  dt-bindings: bd718x7: Yamlify and add BD71850
  mfd: dln2: Fix sanity checking for endpoints
  mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs
  mfd: sc27xx: Add USB charger type detection support
  dt-bindings: mfd: Document STM32 low power timer bindings
  mfd: rk808: Convert RK805 to shutdown/suspend hooks
  mfd: rk808: Reduce shutdown duplication
  mfd: rk808: Stop using syscore ops
  mfd: rk808: Ensure suspend/resume hooks always work
  mfd: rk808: Always use poweroff when requested
  mfd: omap: Remove useless cast for driver.name
  mfd: Kconfig: Fix some misspelling of the word functionality
  mfd: pm8xxx: Replace zero-length array with flexible-array member
  mfd: omap-usb-tll: Replace zero-length array with flexible-array member
  mfd: cpcap: Fix compile if MFD_CORE is not selected
  mfd: cros_ec: Check DT node for usbpd-notify add
  ...

Pull backlight updates from Lee Jones:
 "Switch pwm_bl and corgi_lcd drivers to use GPIO descriptors"

* tag 'backlight-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: corgi: Convert to use GPIO descriptors
  backlight: pwm_bl: Switch to full GPIO descriptor

Pull LED updates from Pavel Machek:
 "One new driver, some driver changes, and some late minute cleanups --
  but those are just whitespace so should be okay.

  There are some major changes being prepared (multicolor, triggers) so
  the next release likely will be more interesting"

* tag 'leds-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: core: Fix warning message when init_data
  leds: make functions easier to understand
  leds: sort Makefile entries
  leds: old enums are not really applicable to new code
  leds: ip30: label power LED as such
  leds: lm3532: make bitfield 'enabled' unsigned
  leds: leds-pwm: Replace zero-length array with flexible-array member
  leds: leds-is31fl32xx: Replace zero-length array with flexible-array member
  leds: pwm: remove useless pwm_period_ns
  leds: pwm: remove header
  leds: pwm: convert to atomic PWM API
  leds: pwm: simplify if condition
  leds: add SGI IP30 led support
  leds: lm3697: fix spelling mistake "To" -> "Too"
  leds: leds-bd2802: remove set but not used variable 'pdata'
  leds: ns2: Convert to GPIO descriptors
  leds: ns2: Absorb platform data

It's definitely incorrect to mark the lock as taken even if
down_read_killable() failed.

This wass overlooked when we switched from down_read() to
down_read_killable() because down_read() won't fail while
down_read_killable() could.

Fixes: 71335f37 ("mm/gup: allow to react to fatal signals")
Reported-by: syzbot+a8c70b7f3579fc0587dc@syzkaller.appspotmail.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lookup_node() uses gup to pin the page and get node information.  It
checks against ret>=0 assuming the page will be filled in.  However it's
also possible that gup will return zero, for example, when the thread is
quickly killed with a fatal signal.  Teach lookup_node() to gracefully
return an error -EFAULT if it happens.

Meanwhile, initialize "page" to NULL to avoid potential risk of
exploiting the pointer.

Fixes: 4426e945 ("mm/gup: allow VM_FAULT_RETRY for multiple times")
Reported-by: syzbot+693dc11fcb53120b5559@syzkaller.appspotmail.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

amd-drm-next-5.7-2020-04-01:

amdgpu:
- HDCP fixes
- gfx10 fix
- Misc display fixes
- BACO fixes

amdkfd:
- Fix memory leak
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401194619.4217-1-alexander.deucher@amd.com

A couple of misc fixes/workarounds for some issues that are causing a
lot of pain for people.

Of most interest are the PCI power management and GR init WARs, which
effect a rather significant number of laptop systems that are in use
today.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5Ef5YKS9EPBH3YUubzvVr++_rzjgSqV_B5nC0L2kB6-Q@mail.gmail.com

Merge tag 'drm-misc-next-fixes-2020-04-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

A bunch of fixes to avoid null pointer dereference in fbcon, fix a return
in xen, some DT bindings fixes, a vc4 issue with 1920x1200 mode validation,
and a conflicting framebuffer in vboxvideo.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200404090057.a3m7uw6tavwtcyon@gilmour.lan

Merge tag 'drm-intel-next-fixes-2020-04-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Only gvt fixes on this round:

- Fix non-privilege access warning (Tina)
- Fix display port type (Tina)
- BDW cmd parser missed SWTESS_BASE_ADDRESS (Yan)
- Bypass length check of LRI (Yan)
- Fix one klocwork warning (Tina)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402213026.GA1141017@intel.com

Merge more updates from Andrew Morton:

 - a lot more of MM, quite a bit more yet to come: (memcg, pagemap,
   vmalloc, pagealloc, migration, thp, ksm, madvise, virtio,
   userfaultfd, memory-hotplug, shmem, rmap, zswap, zsmalloc, cleanups)

 - various other subsystems (procfs, misc, MAINTAINERS, bitops, lib,
   checkpatch, epoll, binfmt, kallsyms, reiserfs, kmod, gcov, kconfig,
   ubsan, fault-injection, ipc)

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (158 commits)
  ipc/shm.c: make compat_ksys_shmctl() static
  ipc/mqueue.c: fix a brace coding style issue
  lib/Kconfig.debug: fix a typo "capabilitiy" -> "capability"
  ubsan: include bug type in report header
  kasan: unset panic_on_warn before calling panic()
  ubsan: check panic_on_warn
  drivers/misc/lkdtm/bugs.c: add arithmetic overflow and array bounds checks
  ubsan: split "bounds" checker from other options
  ubsan: add trap instrumentation option
  init/Kconfig: clean up ANON_INODES and old IO schedulers options
  kernel/gcov/fs.c: replace zero-length array with flexible-array member
  gcov: gcc_3_4: replace zero-length array with flexible-array member
  gcov: gcc_4_7: replace zero-length array with flexible-array member
  kernel/kmod.c: fix a typo "assuems" -> "assumes"
  reiserfs: clean up several indentation issues
  kallsyms: unexport kallsyms_lookup_name() and kallsyms_on_each_symbol()
  samples/hw_breakpoint: drop use of kallsyms_lookup_name()
  samples/hw_breakpoint: drop HW_BREAKPOINT_R when reporting writes
  fs/binfmt_elf.c: don't free interpreter's ELF pheaders on common path
  fs/binfmt_elf.c: allocate less for static executable
  ...

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - Fix a page leak in nfs_destroy_unlinked_subrequests()

   - Fix use-after-free issues in nfs_pageio_add_request()

   - Fix new mount code constant_table array definitions

   - finish_automount() requires us to hold 2 refs to the mount record

  Features:
   - Improve the accuracy of telldir/seekdir by using 64-bit cookies
     when possible.

   - Allow one RDMA active connection and several zombie connections to
     prevent blocking if the remote server is unresponsive.

   - Limit the size of the NFS access cache by default

   - Reduce the number of references to credentials that are taken by
     NFS

   - pNFS files and flexfiles drivers now support per-layout segment
     COMMIT lists.

   - Enable partial-file layout segments in the pNFS/flexfiles driver.

   - Add support for CB_RECALL_ANY to the pNFS flexfiles layout type

   - pNFS/flexfiles Report NFS4ERR_DELAY and NFS4ERR_GRACE errors from
     the DS using the layouterror mechanism.

  Bugfixes and cleanups:
   - SUNRPC: Fix krb5p regressions

   - Don't specify NFS version in "UDP not supported" error

   - nfsroot: set tcp as the default transport protocol

   - pnfs: Return valid stateids in nfs_layout_find_inode_by_stateid()

   - alloc_nfs_open_context() must use the file cred when available

   - Fix locking when dereferencing the delegation cred

   - Fix memory leaks in O_DIRECT when nfs_get_lock_context() fails

   - Various clean ups of the NFS O_DIRECT commit code

   - Clean up RDMA connect/disconnect

   - Replace zero-length arrays with C99-style flexible arrays"

* tag 'nfs-for-5.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (86 commits)
  NFS: Clean up process of marking inode stale.
  SUNRPC: Don't start a timer on an already queued rpc task
  NFS/pnfs: Reference the layout cred in pnfs_prepare_layoutreturn()
  NFS/pnfs: Fix dereference of layout cred in pnfs_layoutcommit_inode()
  NFS: Beware when dereferencing the delegation cred
  NFS: Add a module parameter to set nfs_mountpoint_expiry_timeout
  NFS: finish_automount() requires us to hold 2 refs to the mount record
  NFS: Fix a few constant_table array definitions
  NFS: Try to join page groups before an O_DIRECT retransmission
  NFS: Refactor nfs_lock_and_join_requests()
  NFS: Reverse the submission order of requests in __nfs_pageio_add_request()
  NFS: Clean up nfs_lock_and_join_requests()
  NFS: Remove the redundant function nfs_pgio_has_mirroring()
  NFS: Fix memory leaks in nfs_pageio_stop_mirroring()
  NFS: Fix a request reference leak in nfs_direct_write_clear_reqs()
  NFS: Fix use-after-free issues in nfs_pageio_add_request()
  NFS: Fix races nfs_page_group_destroy() vs nfs_destroy_unlinked_subrequests()
  NFS: Fix a page leak in nfs_destroy_unlinked_subrequests()
  NFS: Remove unused FLUSH_SYNC support in nfs_initiate_pgio()
  pNFS/flexfiles: Specify the layout segment range in LAYOUTGET
  ...

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've mainly focused on fixing bugs and addressing
  issues in recently introduced compression support.

  Enhancement:
   - add zstd support, and set LZ4 by default
   - add ioctl() to show # of compressed blocks
   - show mount time in debugfs
   - replace rwsem with spinlock
   - avoid lock contention in DIO reads

  Some major bug fixes wrt compression:
   - compressed block count
   - memory access and leak
   - remove obsolete fields
   - flag controls

  Other bug fixes and clean ups:
   - fix overflow when handling .flags in inode_info
   - fix SPO issue during resize FS flow
   - fix compression with fsverity enabled
   - potential deadlock when writing compressed pages
   - show missing mount options"

* tag 'f2fs-for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (66 commits)
  f2fs: keep inline_data when compression conversion
  f2fs: fix to disable compression on directory
  f2fs: add missing CONFIG_F2FS_FS_COMPRESSION
  f2fs: switch discard_policy.timeout to bool type
  f2fs: fix to verify tpage before releasing in f2fs_free_dic()
  f2fs: show compression in statx
  f2fs: clean up dic->tpages assignment
  f2fs: compress: support zstd compress algorithm
  f2fs: compress: add .{init,destroy}_decompress_ctx callback
  f2fs: compress: fix to call missing destroy_compress_ctx()
  f2fs: change default compression algorithm
  f2fs: clean up {cic,dic}.ref handling
  f2fs: fix to use f2fs_readpage_limit() in f2fs_read_multi_pages()
  f2fs: xattr.h: Make stub helpers inline
  f2fs: fix to avoid double unlock
  f2fs: fix potential .flags overflow on 32bit architecture
  f2fs: fix NULL pointer dereference in f2fs_verity_work()
  f2fs: fix to clear PG_error if fsverity failed
  f2fs: don't call fscrypt_get_encryption_info() explicitly in f2fs_tmpfile()
  f2fs: don't trigger data flush in foreground operation
  ...

Pull UBI and UBIFS updates from Richard Weinberger:

 - Fix for memory leaks around UBIFS orphan handling

 - Fix for memory leaks around UBI fastmap

 - Remove zero-length array from ubi-media.h

 - Fix for TNC lookup in UBIFS orphan code

* tag 'for-linus-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: ubi-media.h: Replace zero-length array with flexible-array member
  ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len
  ubi: fastmap: Only produce the initial anchor PEB when fastmap is used
  ubi: fastmap: Free unused fastmap anchor peb during detach
  ubifs: ubifs_add_orphan: Fix a memory leak bug
  ubifs: ubifs_jnl_write_inode: Fix a memory leak bug
  ubifs: Fix ubifs_tnc_lookup() usage in do_kill_orphans()

Pull UML updates from Richard Weinberger:

 - New mode for time travel, external via virtio

 - Fixes for ubd to make sure no requests can get lost

 - Fixes for vector networking

 - Allow CONFIG_STATIC_LINK only when possible

 - Minor cleanups and fixes

* tag 'for-linus-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Remove some unnecessary NULL checks in vector_user.c
  um: vector: Avoid NULL ptr deference if transport is unset
  um: Make CONFIG_STATIC_LINK actually static
  um: Implement cpu_relax() as ndelay(1) for time-travel
  um: Implement ndelay/udelay in time-travel mode
  um: Implement time-travel=ext
  um: virtio: Implement VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS
  um: time-travel: Rewrite as an event scheduler
  um: Move timer-internal.h to non-shared
  hostfs: Use kasprintf() instead of fixed buffer formatting
  um: falloc.h needs to be directly included for older libc
  um: ubd: Retry buffer read on any kind of error
  um: ubd: Prevent buffer overrun on command completion
  um: Fix overlapping ELF segments when statically linked
  um: Delete never executed timer
  um: Don't overwrite ethtool driver version
  um: Fix len of file in create_pid_file
  um: Don't use console_drivers directly
  um: Cleanup CONFIG_IOSCHED_CFQ

Pull OpenRISC updates from Stafford Horne:
 "A few cleanups all over the place, things of note:

   - Enable the clone3 syscall

   - Remove CONFIG_CROSS_COMPILE from Krzysztof Kozlowski

   - Update to use mmgrab from Julia Lawall"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: Remove obsolete show_trace_task function
  openrisc: Cleanup copy_thread_tls docs and comments
  openrisc: Enable the clone3 syscall
  openrisc: Convert copy_thread to copy_thread_tls
  openrisc: use mmgrab
  openrisc: configs: Cleanup CONFIG_CROSS_COMPILE

Pull parisc updates from Helge Deller:
 "Some cleanups in arch_rw locking functions, improved interrupt
  handling in arch spinlocks, coversions to request_irq() and syscall
  table generation cleanups"

* 'parisc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: remove nargs from __SYSCALL
  parisc: Refactor alternative code to accept multiple conditions
  parisc: Rework arch_rw locking functions
  parisc: Improve interrupt handling in arch_spin_lock_flags()
  parisc: Replace setup_irq() by request_irq()

Pull sparc update from David Miller:
 "A per-device DMA ops conversion for sparc32 by Chrstioph Hellwig"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc32: use per-device dma_ops

Pull IDE update from David Miller:
 "As usual, very quiet in this subsystem.

  Just a list_for_each_entry_safe() conversion"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  drivers/ide: Fix build regression.
  drivers/ide: convert to list_for_each_entry_safe()

Pull networking fixes from David Miller:

 1) Slave bond and team devices should not be assigned ipv6 link local
    addresses, from Jarod Wilson.

 2) Fix clock sink config on some at803x PHY devices, from Oleksij
    Rempel.

 3) Uninitialized stack space transmitted in slcan frames, fix from
    Richard Palethorpe.

 4) Guard HW VLAN ops properly in stmmac driver, from Jose Abreu.

 5) "=" --> "|=" fix in aquantia driver, from Colin Ian King.

 6) Fix TCP fallback in mptcp, from Florian Westphal. (accessing a plain
    tcp_sk as if it were an mptcp socket).

 7) Fix cavium driver in some configurations wrt. PTP, from Yue Haibing.

 8) Make ipv6 and ipv4 consistent in the lower bound allowed for
    neighbour entry retrans_time, from Hangbin Liu.

 9) Don't use private workqueue in pegasus usb driver, from Petko
    Manolov.

10) Fix integer overflow in mlxsw, from Colin Ian King.

11) Missing refcnt init in cls_tcindex, from Cong Wang.

12) One too many loop iterations when processing cmpri entries in ipv6
    rpl code, from Alexander Aring.

13) Disable SG and TSO by default in r8169, from Heiner Kallweit.

14) NULL deref in macsec, from Davide Caratti.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
  macsec: fix NULL dereference in macsec_upd_offload()
  skbuff.h: Improve the checksum related comments
  net: dsa: bcm_sf2: Ensure correct sub-node is parsed
  qed: remove redundant assignment to variable 'rc'
  wimax: remove some redundant assignments to variable result
  mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_VLAN_MANGLE
  mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_PRIORITY
  r8169: change back SG and TSO to be disabled by default
  net: dsa: bcm_sf2: Do not register slave MDIO bus with OF
  ipv6: rpl: fix loop iteration
  tun: Don't put_page() for all negative return values from XDP program
  net: dsa: mt7530: fix null pointer dereferencing in port5 setup
  mptcp: add some missing pr_fmt defines
  net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before accessing PHY registers
  net_sched: fix a missing refcnt in tcindex_init()
  net: stmmac: dwmac1000: fix out-of-bounds mac address reg setting
  mlxsw: spectrum_trap: fix unintention integer overflow on left shift
  pegasus: Remove pegasus' own workqueue
  neigh: support smaller retrans_time settting
  net: openvswitch: use hlist_for_each_entry_rcu instead of hlist_for_each_entry
  ...

Pull pcmcia updates from Dominik Brodowski:
 "A few PCMCIA odd fixes: removing a few spaces and useless casts,
  replacing snprintf() with scnprintf(), and replacing zero-length
  arrays with a flexible-array member"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: remove some unused space characters
  pcmcia: soc_common.h: Replace zero-length array with flexible-array member
  pcmcia: cs_internal.h: Replace zero-length array with flexible-array member
  pcmcia: Use scnprintf() for avoiding potential buffer overflow
  pcmcia: omap: remove useless cast for driver.name

Fix the following sparse warning:

ipc/shm.c:1335:6: warning: symbol 'compat_ksys_shmctl' was not declared.
Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200403063933.24785-1-yanaijie@huawei.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: somala swaraj <somalaswaraj@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200301135530.18340-1-somalaswaraj@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s/capabilitiy/capability
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1585818594-27373-1-git-send-email-hqjagain@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When syzbot tries to figure out how to deduplicate bug reports, it prefers
seeing a hint about a specific bug type (we can do better than just
"UBSAN").  This lifts the handler reason into the UBSAN report line that
includes the file path that tripped a check.  Unfortunately, UBSAN does
not provide function names.
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Elena Petrova <lenaptr@google.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Link: http://lkml.kernel.org/r/20200227193516.32566-7-keescook@chromium.org
Link: https://lore.kernel.org/lkml/CACT4Y+bsLJ-wFx_TaXqax3JByUOWB3uk787LsyMVcfW6JzzGvg@mail.gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As done in the full WARN() handler, panic_on_warn needs to be cleared
before calling panic() to avoid recursive panics.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Elena Petrova <lenaptr@google.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Link: http://lkml.kernel.org/r/20200227193516.32566-6-keescook@chromium.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>