We weren't consistently checking extent blocks after we read them.
Most places checked the signature, but none checked h_blkno or
h_fs_signature.  Create a toplevel ocfs2_read_extent_block() that does
the read and the validation.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Random places in the code would check a group descriptor bh to see if it
was valid. The previous commit unified descriptor block reads,
validating all block reads in the same place.  Thus, these checks are no
longer necessary.  Rather than eliminate them, however, we change them
to BUG_ON() checks.  This ensures the assumptions remain true.  All of
the code paths to these checks have been audited to ensure they come
from a validated descriptor read.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

We have a clean call for validating group descriptors, but every place
that wants the always does a read_block()+validate() call pair.  Create
a toplevel ocfs2_read_group_descriptor() that does the right
thing.  This allows us to leverage the single call point later for
fancier handling.  We also add validation of gd->bg_generation against
the superblock and gd->bg_blkno against the block we thought we read.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Currently the validation of group descriptors is directly duplicated so
that one version can error the filesystem and the other (resize) can
just report the problem.  Consolidate to one function that takes a
boolean.  Wrap that function with the old call for the old users.

This is in preparation for lifting the read+validate step into a
single function.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Random places in the code would check a dinode bh to see if it was
valid.  Not only did they do different levels of validation, they
handled errors in different ways.

The previous commit unified inode block reads, validating all block
reads in the same place.  Thus, these haphazard checks are no longer
necessary.  Rather than eliminate them, however, we change them to
BUG_ON() checks.  This ensures the assumptions remain true.  All of the
code paths to these checks have been audited to ensure they come from a
validated inode read.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

The ocfs2 code currently reads inodes off disk with a simple
ocfs2_read_block() call.  Each place that does this has a different set
of sanity checks it performs.  Some check only the signature.  A couple
validate the block number (the block read vs di->i_blkno).  A couple
others check for VALID_FL.  Only one place validates i_fs_generation.  A
couple check nothing.  Even when an error is found, they don't all do
the same thing.

We wrap inode reading into ocfs2_read_inode_block().  This will validate
all the above fields, going readonly if they are invalid (they never
should be).  ocfs2_read_inode_block_full() is provided for the places
that want to pass read_block flags.  Every caller is passing a struct
inode with a valid ip_blkno, so we don't need a separate blkno argument
either.

We will remove the validation checks from the rest of the code in a
later commit, as they are no longer necessary.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

This patch adds the Kconfig option "CONFIG_OCFS2_FS_POSIX_ACL"
and mount options "acl" to enable acls in Ocfs2.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

We need to get the parent directories acls and let the new child inherit it.
To this, we add additional calculations for data/metadata allocation.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

This function is used to update acl xattrs during file mode changes.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

This function is used to enhance permission checking with POSIX ACLs.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

This patch adds POSIX ACL(access control lists) APIs in ocfs2. We convert
struct posix_acl to many ocfs2_acl_entry and regard them as an extended
attribute entry.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

This function does the work of ocfs2_xattr_get under an open lock.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Security attributes must be set when creating a new inode.

We do this in three steps.

- First, get security xattr's name and value by security_operation

- Calculate and reserve the meta data and clusters needed by this security
  xattr before starting transaction

- Finally, we set it before add_entry
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

This patch add security xattr set/get/list APIs to
support security attributes in Ocfs2.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

This function is used to set xattr's in a started transaction. It is only
called during inode creation inode for initial security/acl xattrs of the
new inode. These xattrs could be put into ibody or extent block, so xattr
bucket would not be use in this case.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Move out inode allocation from ocfs2_mknod_locked() because
vfs_dq_init() must be called outside of a transaction.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

This patch genericizes the high level handling of extent removal.
ocfs2_remove_btree_range() is nearly identical to
__ocfs2_remove_inode_range(), except that extent tree operations have been
used where necessary. We update ocfs2_remove_inode_range() to use the
generic helper. Now extent tree based structures have an easy way to
truncate ranges.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <joel.becker@oracle.com>

In current ocfs2/xattr, the whole xattr set is divided into
many steps are many transaction are used, this make the
xattr set process isn't like a real transaction, so this
patch try to merge all the transaction into one. Another
benefit is that acl can use it easily now.

I don't merge the transaction of deleting xattr when we
remove an inode. The reason is that if we have a large number
of xattrs and every xattrs has large values(large enough
for outside storage), the whole transaction will be very
huge and it looks like jbd can't handle it(I meet with a
jbd complain once). And the old inode removal is also divided
into many steps, so I'd like to leave as it is.

Note:
In xattr set, I try to avoid ocfs2_extend_trans since if
the credits aren't enough for the extension, it will commit
all the dirty blocks and create a new transaction which may
lead to inconsistency in metadata. All ocfs2_extend_trans
remained are safe now.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

In ocfs2 xattr set, we reserve metadata and clusters in any place
they are needed. It is time-consuming and ineffective, so this
patch try to reserve metadata and clusters at the beginning of
ocfs2_xattr_set.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Move clusters free process into dealloc context so that
they can be freed after the transaction.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Now in ocfs2 xattr set, the whole process are divided into many small
parts and they are wrapped into diffrent transactions and it make the
set doesn't look like a real transaction. So we want to integrate it
into a real one.

In some cases we will allocate some clusters and free some in just one
transaction. e.g, one xattr is larger than inline size, so it and its
value root is stored within the inode while the value is outside in a
cluster. Then we try to update it with a smaller value(larger than the
size of root but smaller than inline size), we may need to free the
outside cluster while allocate a new bucket(one cluster) since now the
inode may be full. The old solution will lock the global_bitmap(if the
local alloc failed in stress test) and then the truncate log. This will
cause a ABBA lock with truncate log flush.

This patch add the clusters free in dealloc_ctxt, so that we can record
the free clusters during the transaction and then free it after we
release the global_bitmap in xattr set.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

When the first block of a bucket is filled up with xattr
entries, we normally extend the bucket. But if we are
just replace one xattr with small length, we don't need
to extend it. This is important since we will calculate
what we need before the transaction and in this situation
no resources will be allocated.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

When we call ocfs2_init_xattr_bucket, we deem that the new buffer head
will be written to disk immediately, so we just use sb_getblk. But in
some cases the buffer may have already been in ocfs2 uptodate cache,
so we only call ocfs2_set_buffer_uptodate if the buffer head isn't
in the cache.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Joel has refactored xattr bucket and make xattr bucket a general
wrapper. So in ocfs2_defrag_xattr_bucket, we have already passed the
bucket in, so there is no need to allocate a new one and read it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

The ocfs2_xattr_set_entry_in_bucket() function is already working on an
ocfs2_xattr_bucket structure, so let's use the bucket API.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Use the ocfs2_xattr_bucket abstraction for reading and writing the
bucket in ocfs2_defrag_xattr_bucket().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Use the ocfs2_xattr_bucket abstraction in
ocfs2_xattr_create_index_block() and its helpers.  We get more efficient
reads, a lot less buffer_head munging, and nicer code to boot.  While
we're at it, ocfs2_xattr_update_xattr_search() becomes void.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Change the ocfs2_xattr_bucket_find() function to use ocfs2_xattr_bucket
as its abstraction.  This makes for more efficient reads, as buckets are
linear blocks, and also has improved caching characteristics.  It also
reads better.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

The ocfs2_xattr_bucket structure is a nice abstraction, but it is a bit
large to have on the stack.  Just like ocfs2_path, let's allocate it
with a ocfs2_xattr_bucket_new() function.

We can now store the inode on the bucket, cleaning up all the other
bucket functions.  While we're here, we catch another place or two that
wasn't using ocfs2_read_xattr_bucket().

Updates:
- No longer allocating xis.bucket, as it will never be used.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Now that the places that copy whole buckets are using struct
ocfs2_xattr_bucket, we can do the copy in a dedicated function.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

A common action is to call ocfs2_journal_access() and
ocfs2_journal_dirty() on the buffer heads of an xattr bucket.  Let's
create nice wrappers.

While we're there, let's drop the places that try to be smart by writing
only the first and last blocks of a bucket.  A bucket is contiguous, so
writing the whole thing is actually more efficient.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

The ocfs2_read_xattr_bucket() function would read an xattr bucket into a
list of buffer heads.  However, we have a nice ocfs2_xattr_bucket
structure.  Let's have it fill that out instead.

In addition, ocfs2_read_xattr_bucket() would initialize buffer heads for
a bucket that's never been on disk before.  That's confusing.  Let's
call that functionality ocfs2_init_xattr_bucket().

The functions ocfs2_cp_xattr_bucket() and ocfs2_half_xattr_bucket() are
updated to use the ocfs2_xattr_bucket structure rather than raw bh
lists.  That way they can use the new read/init calls.  In addition,
they drop the wasted read of an existing target bucket.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

A common theme is walking all the buffer heads on an ocfs2_xattr_bucket
and releasing them.  Let's wrap that.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

The xattr code often wants to access the ocfs2_xattr_header at the start
of an bucket.  Rather than walk the pointer chains, let's just create
another nice macro.  As a side benefit, we can get rid of the mostly
spurious ->bu_xh element on the bucket structure.  The idea is ripped
from the ocfs2_path code.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

The xattr code often wants to access the data pointer for blocks in an
xattr bucket.  This is usually found by dereferencing the bh array
hanging off of the ocfs2_xattr_bucket structure.  Rather than do this
all the time, let's provide a nice little macro.  The idea is ripped
from the ocfs2_path code.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

The xattr code often wants to know the block number of an xattr bucket.
This is usually found by dereferencing the first bh hanging off of the
ocfs2_xattr_bucket structure.  Rather than do this all the time, let's
provide a nice little macro.  The idea is ripped from the ocfs2_path
code.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

The ocfs2_xattr_bucket structure keeps track of the buffers for one
xattr bucket.  Let's prefix the fields for easier code navigation.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

* 'audit.b61' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  audit: validate comparison operations, store them in sane form
  clean up audit_rule_{add,del} a bit
  make sure that filterkey of task,always rules is reported
  audit rules ordering, part 2
  fixing audit rule ordering mess, part 1
  audit_update_lsm_rules() misses the audit_inode_hash[] ones
  sanitize audit_log_capset()
  sanitize audit_fd_pair()
  sanitize audit_mq_open()
  sanitize AUDIT_MQ_SENDRECV
  sanitize audit_mq_notify()
  sanitize audit_mq_getsetattr()
  sanitize audit_ipc_set_perm()
  sanitize audit_ipc_obj()
  sanitize audit_socketcall
  don't reallocate buffer in every audit_sockaddr()

Add standard interfaces for alarm/update irqs enabling.  Drivers are no
more required to implement equivalent ioctl code as rtc-dev will provide
it.

UIE emulation should now be handled correctly and will work even for those
RTC drivers who cannot be configured to do both UIE and AIE.
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened.  They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim.  This bug could
cause filesystem deadlocks.

The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called.  It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock.  The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.

Add a new flag for write_begin, AOP_FLAG_NOFS.  Filesystems can now act on
this flag in their write_begin function.  Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).

This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg.  ocfs2_alloc_write_ctxt, for a
random example).

[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>		[2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
  untouched to the grab_cache_page_write_begin() function.  That
  just simplifies everybody, and may even allow future expansion of the
  logic.   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>