- 18 Mar, 2017 36 commits
-
-
Johan Hovold authored
commit b7321e81 upstream. Make sure to check for the required interrupt-in endpoint to avoid dereferencing a NULL-pointer should a malicious device lack such an endpoint. Note that a fairly recent change purported to fix this issue, but added an insufficient test on the number of endpoints only, a test which can now be removed. Fixes: 4ec0ef3a ("USB: iowarrior: fix oops with malicious USB descriptors") Fixes: 946b960d ("USB: add driver for iowarrior devices.") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 30572418 upstream. This driver needlessly took another reference to the tty on open, a reference which was then never released on close. This lead to not just a leak of the tty, but also a driver reference leak that prevented the driver from being unloaded after a port had once been opened. Fixes: 4a90f09b ("tty: usb-serial krefs") Signed-off-by:
-
Johan Hovold authored
commit 8c76d7cd upstream. Add missing sanity check to the bulk-in completion handler to avoid an integer underflow that could be triggered by a malicious device. This avoids leaking up to 56 bytes from after the URB transfer buffer to user space. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Guenter Roeck authored
commit dcc7620c upstream. Upstream commit 98d74f9c ("xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers") fixes a problem with hot pluggable PCI xhci controllers which can result in excessive timeouts, to the point where the system reports a deadlock. The same problem is seen with hot pluggable xhci controllers using the xhci-plat driver, such as the driver used for Type-C ports on rk3399. Similar to hot-pluggable PCI controllers, the driver for this chip removes the xhci controller from the system when the Type-C cable is disconnected. The solution for PCI devices works just as well for non-PCI devices and avoids the problem. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Peter Chen authored
commit f95e60a7 upstream. According to xHCI spec, HCIVERSION containing a BCD encoding of the xHCI specification revision number, 0100h corresponds to xHCI version 1.0. Change "100" as "0x100". Cc: Lu Baolu <baolu.lu@linux.intel.com> Fixes: 04abb6de ("xhci: Read and parse new xhci 1.1 capability register") Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Roger Quadros authored
commit eb38d913 upstream. This reverts commit 4fbac520. This commit breaks g_webcam when used with uvc-gadget [1]. The user space application (e.g. uvc-gadget) is responsible for sending response to UVC class specific requests on control endpoint in uvc_send_response() in uvc_v4l2.c. The bad commit was causing a duplicate response to be sent with incorrect response data thus causing UVC probe to fail at the host and broken control transfer endpoint at the gadget. [1] - git://git.ideasonboard.org/uvc-gadget.gitAcked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Felipe Balbi authored
commit 2bfa0719 upstream. If we're dealing with SuperSpeed endpoints, we need to make sure to pass along the companion descriptor and initialize fields needed by the Gadget API. Eventually, f_fs.c should be converted to use config_ep_by_speed() like all other functions, though. Signed-off-by:
-
Jelle Martijn Kok authored
commit 85550f91 upstream. In patch 2e2aa1bcm, USB suspend and wakeup control requests are passed to SFR_OHCIICR register. If a processor does not have such a register, this hub control request will be dropped. If no such a SFR register is available, all USB suspend control requests will now be processed using ohci_hub_control() (like before patch 2e2aa1bcm.) Tested on an Atmel AT91SAM9G20 with an on-board TI TUSB2046B hub chip If the last USB device is unplugged from the USB hub, the hub goes into sleep and will not wakeup when an USB devices is inserted. Fixes: 2e2aa1bc ("usb: ohci-at91: Forcibly suspend ports while USB suspend") Signed-off-by:
Jelle Martijn Kok <jmkok@youcom.nl> Tested-by:
Wenyou Yang <wenyou.yang@atmel.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Roger Quadros authored
commit 0913750f upstream. We need to break from all cases if we want to treat each one of them separately. Reported-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Fixes: d2728fb3 ("usb: dwc3: omap: Pass VBUS and ID events transparently") Signed-off-by:
-
Felipe Balbi authored
commit 7369090a upstream. Some gadget drivers are bad, bad boys. We notice that ADB was passing bad Burst Size which caused top bits of param0 to be overwritten which confused DWC3 when running this command. In order to avoid future issues, we're going to make sure values passed by macros are always safe for the controller. Note that ADB still needs a fix to *not* pass bad values. Reported-by:
Mohamed Abbas <mohamed.abbas@intel.com> Sugested-by:
Adam Andruszak <adam.andruszak@intel.com> Signed-off-by:
-
Peter Chen authored
commit 5bbc8526 upstream. When the user does device unbind and rebind test, the kernel will show below dump due to usb_gadget memory region is dirty after unbind. Clear usb_gadget region for every new probe. root@imx6qdlsolo:/sys/bus/platform/drivers/dummy_udc# echo dummy_udc.0 > bind [ 102.523312] kobject (eddd78b0): tried to init an initialized object, something is seriously wrong. [ 102.532447] CPU: 0 PID: 734 Comm: sh Not tainted 4.10.0-rc7-00872-g1b2b8e9 #1298 [ 102.539866] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 102.545717] Backtrace: [ 102.548225] [<c010d090>] (dump_backtrace) from [<c010d338>] (show_stack+0x18/0x1c) [ 102.555822] r7:ede34000 r6:60010013 r5:00000000 r4:c0f29418 [ 102.561512] [<c010d320>] (show_stack) from [<c040c2a4>] (dump_stack+0xb4/0xe8) [ 102.568764] [<c040c1f0>] (dump_stack) from [<c040e6d4>] (kobject_init+0x80/0x9c) [ 102.576187] r10:0000001f r9:eddd7000 r8:eeaf8c10 r7:eddd78a8 r6:c177891c r5:c0f3b060 [ 102.584036] r4:eddd78b0 r3:00000000 [ 102.587641] [<c040e654>] (kobject_init) from [<c05359a4>] (device_initialize+0x28/0xf8) [ 102.595665] r5:eebc4800 r4:eddd78a8 [ 102.599268] [<c053597c>] (device_initialize) from [<c05382ac>] (device_register+0x14/0x20) [ 102.607556] r7:eddd78a8 r6:00000000 r5:eebc4800 r4:eddd78a8 [ 102.613256] [<c0538298>] (device_register) from [<c0668ef4>] (usb_add_gadget_udc_release+0x8c/0x1ec) [ 102.622410] r5:eebc4800 r4:eddd7860 [ 102.626015] [<c0668e68>] (usb_add_gadget_udc_release) from [<c0669068>] (usb_add_gadget_udc+0x14/0x18) [ 102.635351] r10:0000001f r9:eddd7000 r8:eddd788c r7:bf003770 r6:eddd77f8 r5:eddd7818 [ 102.643198] r4:eddd785c r3:eddd7b24 [ 102.646834] [<c0669054>] (usb_add_gadget_udc) from [<bf003428>] (dummy_udc_probe+0x170/0x1c4 [dummy_hcd]) [ 102.656458] [<bf0032b8>] (dummy_udc_probe [dummy_hcd]) from [<c053d114>] (platform_drv_probe+0x54/0xb8) [ 102.665881] r10:00000008 r9:c1778960 r8:bf004128 r7:fffffdfb r6:bf004128 r5:eeaf8c10 [ 102.673727] r4:eeaf8c10 [ 102.676293] [<c053d0c0>] (platform_drv_probe) from [<c053b160>] (driver_probe_device+0x264/0x474) [ 102.685186] r7:00000000 r6:00000000 r5:c1778960 r4:eeaf8c10 [ 102.690876] [<c053aefc>] (driver_probe_device) from [<c05397c4>] (bind_store+0xb8/0x14c) [ 102.698994] r10:eeb3bb4c r9:ede34000 r8:0000000c r7:eeaf8c44 r6:bf004128 r5:c0f3b668 [ 102.706840] r4:eeaf8c10 [ 102.709402] [<c053970c>] (bind_store) from [<c0538ca8>] (drv_attr_store+0x28/0x34) [ 102.716998] r9:ede34000 r8:00000000 r7:ee3863c0 r6:ee3863c0 r5:c0538c80 r4:c053970c [ 102.724776] [<c0538c80>] (drv_attr_store) from [<c029c930>] (sysfs_kf_write+0x50/0x54) [ 102.732711] r5:c0538c80 r4:0000000c [ 102.736313] [<c029c8e0>] (sysfs_kf_write) from [<c029be84>] (kernfs_fop_write+0x100/0x214) [ 102.744599] r7:ee3863c0 r6:eeb3bb40 r5:00000000 r4:00000000 [ 102.750287] [<c029bd84>] (kernfs_fop_write) from [<c0222dd8>] (__vfs_write+0x34/0x120) [ 102.758231] r10:00000000 r9:ede34000 r8:c0108bc4 r7:0000000c r6:ede35f80 r5:c029bd84 [ 102.766077] r4:ee223780 [ 102.768638] [<c0222da4>] (__vfs_write) from [<c0224678>] (vfs_write+0xa8/0x170) [ 102.775974] r9:ede34000 r8:c0108bc4 r7:ede35f80 r6:01861cb0 r5:ee223780 r4:0000000c [ 102.783743] [<c02245d0>] (vfs_write) from [<c0225498>] (SyS_write+0x4c/0xa8) [ 102.790818] r9:ede34000 r8:c0108bc4 r7:0000000c r6:01861cb0 r5:ee223780 r4:ee223780 [ 102.798595] [<c022544c>] (SyS_write) from [<c0108a20>] (ret_fast_syscall+0x0/0x1c) [ 102.806188] r7:00000004 r6:b6e83d58 r5:01861cb0 r4:0000000c Fixes: 90fccb52 ("usb: gadget: Gadget directory cleanup - group UDC drivers") Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Xiaolong Ye <xiaolong.ye@intel.com> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Ethan Zhao authored
commit 0d5370d1 upstream. QLogic ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter has the VPD access issue too, while read the common pci-sysfs access interface shown as /sys/devices/pci0000:00/0000:00:03.2/0000:0b:00.0/vpd with simple 'cat' could cause system hang and panic: Kernel panic - not syncing: An NMI occurred. Depending on your system the reason for the NMI is logged in any one of the following resources: 1. Integrated Management Log (IML) 2. OA Syslog 3. OA Forward Progress Log 4. iLO Event Log CPU: 0 PID: 15070 Comm: udevadm Not tainted 4.1.12 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015 0000000000000086 000000007f0cdf51 ffff880c4fa05d58 ffffffff817193de ffffffffa00b42d8 0000000000000075 ffff880c4fa05dd8 ffffffff81714072 0000000000000008 ffff880c4fa05de8 ffff880c4fa05d88 000000007f0cdf51 Call Trace: <NMI> [<ffffffff817193de>] dump_stack+0x63/0x81 [<ffffffff81714072>] panic+0xd0/0x20e [<ffffffffa00b390d>] hpwdt_pretimeout+0xdd/0xe0 [hpwdt] [<ffffffff81021fc9>] ? sched_clock+0x9/0x10 [<ffffffff8101c101>] nmi_handle+0x91/0x170 [<ffffffff8101c10c>] ? nmi_handle+0x9c/0x170 [<ffffffff8101c5fe>] io_check_error+0x1e/0xa0 [<ffffffff8101c719>] default_do_nmi+0x99/0x140 [<ffffffff8101c8b4>] do_nmi+0xf4/0x170 [<ffffffff817232c5>] end_repeat_nmi+0x1a/0x1e [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120 [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120 [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120 <<EOE>> [<ffffffff815db4b3>] raw_pci_read+0x23/0x40 [<ffffffff815db4fc>] pci_read+0x2c/0x30 [<ffffffff8136f612>] pci_user_read_config_word+0x72/0x110 [<ffffffff8136f746>] pci_vpd_pci22_wait+0x96/0x130 [<ffffffff8136ff9b>] pci_vpd_pci22_read+0xdb/0x1a0 [<ffffffff8136ea30>] pci_read_vpd+0x20/0x30 [<ffffffff8137d590>] read_vpd_attr+0x30/0x40 [<ffffffff8128e037>] sysfs_kf_bin_read+0x47/0x70 [<ffffffff8128d24e>] kernfs_fop_read+0xae/0x180 [<ffffffff8120dd97>] __vfs_read+0x37/0x100 [<ffffffff812ba7e4>] ? security_file_permission+0x84/0xa0 [<ffffffff8120e366>] ? rw_verify_area+0x56/0xe0 [<ffffffff8120e476>] vfs_read+0x86/0x140 [<ffffffff8120f3f5>] SyS_read+0x55/0xd0 [<ffffffff81720f2e>] system_call_fastpath+0x12/0x71 Shutting down cpus with NMI Kernel Offset: disabled drm_kms_helper: panic occurred, switching back to text console So blacklist the access to its VPD. Signed-off-by:
Ethan Zhao <ethan.zhao@oracle.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Balbir Singh authored
commit a69e2fb7 upstream. The CPPR (Current Processor Priority Register) of a XICS interrupt presentation controller contains a value N, such that only interrupts with a priority "more favoured" than N will be received by the CPU, where "more favoured" means "less than". So if the CPPR has the value 5 then only interrupts with a priority of 0-4 inclusive will be received. In theory the CPPR can support a value of 0 to 255 inclusive. In practice Linux only uses values of 0, 4, 5 and 0xff. Setting the CPPR to 0 rejects all interrupts, setting it to 0xff allows all interrupts. The values 4 and 5 are used to differentiate IPIs from external interrupts. Setting the CPPR to 5 allows IPIs to be received but not external interrupts. The CPPR emulation in the OPAL XICS implementation only directly supports priorities 0 and 0xff. All other priorities are considered equivalent, and mapped to a single priority value internally. This means when using icp-opal we can not allow IPIs but not externals. This breaks Linux's use of priority values when a CPU is hot unplugged. After migrating IRQs away from the CPU that is being offlined, we set the priority to 5, meaning we still want the offline CPU to receive IPIs. But the effect of the OPAL XICS emulation's use of a single priority value is that all interrupts are rejected by the CPU. With the CPU offline, and not receiving IPIs, we may not be able to wake it up to bring it back online. The first part of the fix is in icp_opal_set_cpu_priority(). CPPR values of 0 to 4 inclusive will correctly cause all interrupts to be rejected, so we pass those CPPR values through to OPAL. However if we are called with a CPPR of 5 or greater, the caller is expecting to be able to allow IPIs but not external interrupts. We know this doesn't work, so instead of rejecting all interrupts we choose the opposite which is to allow all interrupts. This is still not correct behaviour, but we know for the only existing caller (xics_migrate_irqs_away()), that it is the better option. The other part of the fix is in xics_migrate_irqs_away(). Instead of setting priority (CPPR) to 0, and then back to 5 before migrating IRQs, we migrate the IRQs before setting the priority back to 5. This should have no effect on an ICP backend with a working set_priority(), and on icp-opal it means we will keep all interrupts blocked until after we've finished doing the IRQ migration. Additionally we wait for 5ms after doing the migration to make sure there are no IRQs in flight. Fixes: d7436188 ("powerpc/xics: Add ICP OPAL backend") Suggested-by:
Michael Ellerman <mpe@ellerman.id.au> Reported-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Tested-by:
Balbir Singh <bsingharora@gmail.com> [mpe: Rewrote comments and change log, change delay to 5ms] Signed-off-by:
-
Laurentiu Tudor authored
commit 3fb66a70 upstream. On 32-bit book-e machines, hugepd_ok() no longer takes into account null hugepd values, causing this crash at boot: Unable to handle kernel paging request for data at address 0x80000000 ... NIP [c0018378] follow_huge_addr+0x38/0xf0 LR [c001836c] follow_huge_addr+0x2c/0xf0 Call Trace: follow_huge_addr+0x2c/0xf0 (unreliable) follow_page_mask+0x40/0x3e0 __get_user_pages+0xc8/0x450 get_user_pages_remote+0x8c/0x250 copy_strings+0x110/0x390 copy_strings_kernel+0x2c/0x50 do_execveat_common+0x478/0x630 do_execve+0x2c/0x40 try_to_run_init_process+0x18/0x60 kernel_init+0xbc/0x110 ret_from_kernel_thread+0x5c/0x64 This impacts all nxp (ex-freescale) 32-bit booke platforms. This was caused by the change of hugepd_t.pd from signed to unsigned, and the update to the nohash version of hugepd_ok(). Previously hugepd_ok() could exclude all non-huge and NULL pgds using > 0, whereas now we need to explicitly check that the value is not zero and also that PD_HUGE is *clear*. This isn't protected by the pgd_none() check in __find_linux_pte_or_hugepte() because on 32-bit we use pgtable-nopud.h, which causes the pgd_none() check to be always false. Fixes: 20717e1f ("powerpc/mm: Fix little-endian 4K hugetlb") Reported-by:
Madalin-Cristian Bucur <madalin.bucur@nxp.com> Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> [mpe: Flesh out change log details.] Signed-off-by:
-
Ravi Bangoria authored
commit e148bd17 upstream. emulate_step() uses a number of underlying kernel functions that were initially not enabled for LE. This has been rectified since. So, fix emulate_step() for LE for the corresponding instructions. Reported-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Signed-off-by:
-
Qi Hou authored
commit 2e1e4949 upstream. Refcount of of_node is increased with of_node_get() in i2c_mux_add_adapter(). It must be decreased with of_node_put() in i2c_mux_del_adapters(). Signed-off-by:
Qi Hou <qi.hou@windriver.com> Reviewed-by:
Zhang Xiao <xiao.zhang@windriver.com> Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Jonathan McDowell authored
commit 606142af upstream. On Kernel 4.9, WARNINGs about doing DMA on stack are hit at the dw2102 driver: one in su3000_power_ctrl() and the other in tt_s2_4600_frontend_attach(). Both were due to the use of buffers on the stack as parameters to dvb_usb_generic_rw() and the resulting attempt to do DMA with them. The device was non-functional as a result. So, switch this driver over to use a buffer within the device state structure, as has been done with other DVB-USB drivers. Tested with TechnoTrend TT-connect S2-4600. [mchehab@osg.samsung.com: fixed a warning at su3000_i2c_transfer() that state var were dereferenced before check 'd'] Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Ard Biesheuvel authored
commit d1eb9814 upstream. On ARM and arm64, we use a dedicated mm_struct to map the UEFI Runtime Services regions, which allows us to map those regions on demand, and in a way that is guaranteed to be compatible with incoming kernels across kexec. As it turns out, we don't fully initialize the mm_struct in the same way as process mm_structs are initialized on fork(), which results in the following crash on ARM if CONFIG_CPUMASK_OFFSTACK=y is enabled: ... EFI Variables Facility v0.08 2004-May-17 Unable to handle kernel NULL pointer dereference at virtual address 00000000 [...] Process swapper/0 (pid: 1) ... __memzero() check_and_switch_context() virt_efi_get_next_variable() efivar_init() efivars_sysfs_init() do_one_initcall() ... This is due to a missing call to mm_init_cpumask(), so add it. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1488395154-29786-1-git-send-email-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Eric W. Biederman authored
commit 040757f7 upstream. Always increment/decrement ucount->count under the ucounts_lock. The increments are there already and moving the decrements there means the locking logic of the code is simpler. This simplification in the locking logic fixes a race between put_ucounts and get_ucounts that could result in a use-after-free because the count could go zero then be found by get_ucounts and then be freed by put_ucounts. A bug presumably this one was found by a combination of syzkaller and KASAN. JongWhan Kim reported the syzkaller failure and Dmitry Vyukov spotted the race in the code. Fixes: f6b2db1a ("userns: Make the count of user namespaces per user") Reported-by:
JongHwan Kim <zzoru007@gmail.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
Andrei Vagin <avagin@gmail.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Rik van Riel authored
commit bf7165cf upstream. There are several trace include files that define TRACE_INCLUDE_FILE. Include several of them in the same .c file (as I currently have in some code I am working on), and the compile will blow up with a "warning: "TRACE_INCLUDE_FILE" redefined #define TRACE_INCLUDE_FILE syscalls" Every other include file in include/trace/events/ avoids that issue by having a #undef TRACE_INCLUDE_FILE before the #define; syscalls.h should have one, too. Link: http://lkml.kernel.org/r/20160928225554.13bd7ac6@annuminas.surriel.com Fixes: b8007ef7 ("tracing: Separate raw syscall from syscall tracer") Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Stefan Wahren authored
commit ababb089 upstream. Since commit e2474541 ("bcm2835: Fix hang for writing messages larger than 16 bytes") the interrupt handler is prone to a possible NULL pointer dereference. This could happen if an interrupt fires before curr_msg is set by bcm2835_i2c_xfer_msg() and randomly occurs on the RPi 3. Even this is an unexpected behavior the driver must handle that with an error instead of a crash. Reported-by:
Peter Robinson <pbrobinson@gmail.com> Fixes: e2474541 ("bcm2835: Fix hang for writing messages larger than 16 bytes") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Arnd Bergmann authored
commit 886f9c69 upstream. All pointers to these functions were removed, so now they produce warnings: arch/mips/ralink/rt305x.c:92:13: error: 'rt305x_wdt_reset' defined but not used [-Werror=unused-function] This removes the functions. If we need them again, the patch can be reverted later. Fixes: f576fb6a ("MIPS: ralink: cleanup the soc specific pinmux data") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: John Crispin <john@phrozen.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15044/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Arnd Bergmann authored
commit d92240d1 upstream. The functions were originally used for the module unload path, but are not referenced any more and just cause warnings: arch/mips/ralink/timer.c:104:13: error: 'rt_timer_disable' defined but not used [-Werror=unused-function] arch/mips/ralink/timer.c:74:13: error: 'rt_timer_free' defined but not used [-Werror=unused-function] Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Fixes: 62ee73d2 ("MIPS: ralink: Make timer explicitly non-modular") Signed-off-by:
-
John Crispin authored
commit 9c48568b upstream. Over the years the code has been changed various times leading to argc/argv being defined in a different function to where we actually use the variables. Clean this up by moving them to prom_init_cmdline(). Signed-off-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14902/Signed-off-by:
-
Arnd Bergmann authored
commit 906b2684 upstream. kernelci.org reports a warning for this driver, as it copies a local variable into a 'const char *' string: drivers/mtd/maps/pmcmsp-flash.c:149:30: warning: passing argument 1 of 'strncpy' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] Using kstrndup() simplifies the code and avoids the warning. Signed-off-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit b3f60461 upstream. Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in kernelci.org: arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT This updates the defconfig to have the feature built-in. Fixes: 1aefc75b ("cpufreq: stats: Make the stats code non-modular") Signed-off-by:
-
Arnd Bergmann authored
commit 23ca9b52 upstream. kernelci reports a failure of the ip28_defconfig build after upgrading its gcc version: arch/mips/sgi-ip22/Platform:29: *** gcc doesn't support needed option -mr10k-cache-barrier=store. Stop. The problem apparently is that the -mr10k-cache-barrier=store option is now rejected for CPUs other than r10k. Explicitly including the CPU in the check fixes this and is safe because both options were introduced in gcc-4.4. Signed-off-by:
-
Arnd Bergmann authored
commit ea58fca1 upstream. Since linux-4.3, SCSI_DH is a bool symbol, causing a warning in kernelci.org: arch/mips/configs/ip27_defconfig:136:warning: symbol value 'm' invalid for SCSI_DH This updates the defconfig to have the feature built-in. Fixes: 086b91d0 ("scsi_dh: integrate into the core SCSI code") Signed-off-by:
-
Arnd Bergmann authored
commit b6176494 upstream. One of the last remaining failures in kernelci.org is for a gcc bug: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: error: insn does not satisfy its constraints: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: internal compiler error: in extract_constrain_insn, at recog.c:2190 This is apparently broken in gcc-6 but fixed in gcc-7, and I cannot reproduce the problem here. However, it is clear that ip27_defconfig does not actually need this driver as the platform has only PCI-X but not PCIe, and the qlge adapter in turn is PCIe-only. The driver was originally enabled in 2010 along with lots of other drivers. Fixes: 59d302b3 ("MIPS: IP27: Make defconfig useful again.") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Arnd Bergmann authored
commit 1742ac26 upstream. vdso.h includes <spaces.h> implicitly after defining CONFIG_32BITS. This defeats the override in mach-ip27/spaces.h, leading to a build error that shows up in kernelci.org: In file included from arch/mips/include/asm/mach-ip27/spaces.h:29:0, from arch/mips/include/asm/page.h:12, from arch/mips/vdso/vdso.h:26, from arch/mips/vdso/gettimeofday.c:11: arch/mips/include/asm/mach-generic/spaces.h:28:0: error: "CAC_BASE" redefined [-Werror] #define CAC_BASE _AC(0x80000000, UL) An earlier patch tried to make the second definition conditional, but that patch had the #ifdef in the wrong place, and would lead to another warning: arch/mips/include/asm/io.h: In function 'phys_to_virt': arch/mips/include/asm/io.h:138:9: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] For all I can tell, there is no other reason than vdso32 to ever include this file with CONFIG_32BITS set, and the vdso itself should never refer to the base addresses as it is running in user space, so adding an #ifdef here is safe. Link: https://patchwork.kernel.org/patch/9418187/ Fixes: 3ffc17d8 ("MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0") Signed-off-by:
-
Arnd Bergmann authored
commit 9ddc16ad upstream. In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool symbols instead of tristate, and kernelci.org reports a bunch of warnings for this, like: arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE This changes all the MIPS defconfigs with these symbols to have them built-in. Fixes: 9b91c96c ("netfilter: conntrack: built-in support for UDPlite") Fixes: c51d3901 ("netfilter: conntrack: built-in support for DCCP") Signed-off-by:
-
Arnd Bergmann authored
commit 7d6e9105 upstream. An ancient gcc bug (first reported in 2003) has apparently resurfaced on MIPS, where kernelci.org reports an overly large stack frame in the whirlpool hash algorithm: crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] With some testing in different configurations, I'm seeing large variations in stack frames size up to 1500 bytes for what should have around 300 bytes at most. I also checked the reference implementation, which is essentially the same code but also comes with some test and benchmarking infrastructure. It seems that recent compiler versions on at least arm, arm64 and powerpc have a partial fix for this problem, but enabling "-fsched-pressure", but even with that fix they suffer from the issue to a certain degree. Some testing on arm64 shows that the time needed to hash a given amount of data is roughly proportional to the stack frame size here, which makes sense given that the wp512 implementation is doing lots of loads for table lookups, and the problem with the overly large stack is a result of doing a lot more loads and stores for spilled registers (as seen from inspecting the object code). Disabling -fschedule-insns consistently fixes the problem for wp512, in my collection of cross-compilers, the results are consistently better or identical when comparing the stack sizes in this function, though some architectures (notable x86) have schedule-insns disabled by default. The four columns are: default: -O2 press: -O2 -fsched-pressure nopress: -O2 -fschedule-insns -fno-sched-pressure nosched: -O2 -no-schedule-insns (disables sched-pressure) default press nopress nosched alpha-linux-gcc-4.9.3 1136 848 1136 176 am33_2.0-linux-gcc-4.9.3 2100 2076 2100 2104 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 cris-linux-gcc-4.9.3 272 272 272 272 frv-linux-gcc-4.9.3 1128 1000 1128 280 hppa64-linux-gcc-4.9.3 1128 336 1128 184 hppa-linux-gcc-4.9.3 644 308 644 276 i386-linux-gcc-4.9.3 352 352 352 352 m32r-linux-gcc-4.9.3 720 656 720 268 microblaze-linux-gcc-4.9.3 1108 604 1108 256 mips64-linux-gcc-4.9.3 1328 592 1328 208 mips-linux-gcc-4.9.3 1096 624 1096 240 powerpc64-linux-gcc-4.9.3 1088 432 1088 160 powerpc-linux-gcc-4.9.3 1080 584 1080 224 s390-linux-gcc-4.9.3 456 456 624 360 sh3-linux-gcc-4.9.3 292 292 292 292 sparc64-linux-gcc-4.9.3 992 240 992 208 sparc-linux-gcc-4.9.3 680 592 680 312 x86_64-linux-gcc-4.9.3 224 240 272 224 xtensa-linux-gcc-4.9.3 1152 704 1152 304 aarch64-linux-gcc-7.0.0 224 224 1104 208 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 mips-linux-gcc-7.0.0 1120 648 1120 272 x86_64-linux-gcc-7.0.1 240 240 304 240 arm-linux-gnueabi-gcc-4.4.7 840 392 arm-linux-gnueabi-gcc-4.5.4 784 728 784 320 arm-linux-gnueabi-gcc-4.6.4 736 728 736 304 arm-linux-gnueabi-gcc-4.7.4 944 784 944 352 arm-linux-gnueabi-gcc-4.8.5 464 464 760 352 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 arm-linux-gnueabi-gcc-5.3.1 824 824 1064 336 arm-linux-gnueabi-gcc-6.1.1 808 808 1056 344 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 Trying the same test for serpent-generic, the picture is a bit different, and while -fno-schedule-insns is generally better here than the default, -fsched-pressure wins overall, so I picked that instead. default press nopress nosched alpha-linux-gcc-4.9.3 1392 864 1392 960 am33_2.0-linux-gcc-4.9.3 536 524 536 528 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 cris-linux-gcc-4.9.3 528 528 528 528 frv-linux-gcc-4.9.3 536 400 536 504 hppa64-linux-gcc-4.9.3 524 208 524 480 hppa-linux-gcc-4.9.3 768 472 768 508 i386-linux-gcc-4.9.3 564 564 564 564 m32r-linux-gcc-4.9.3 712 576 712 532 microblaze-linux-gcc-4.9.3 724 392 724 512 mips64-linux-gcc-4.9.3 720 384 720 496 mips-linux-gcc-4.9.3 728 384 728 496 powerpc64-linux-gcc-4.9.3 704 304 704 480 powerpc-linux-gcc-4.9.3 704 296 704 480 s390-linux-gcc-4.9.3 560 560 592 536 sh3-linux-gcc-4.9.3 540 540 540 540 sparc64-linux-gcc-4.9.3 544 352 544 496 sparc-linux-gcc-4.9.3 544 344 544 496 x86_64-linux-gcc-4.9.3 528 536 576 528 xtensa-linux-gcc-4.9.3 752 544 752 544 aarch64-linux-gcc-7.0.0 432 432 656 480 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 mips-linux-gcc-7.0.0 720 464 720 488 x86_64-linux-gcc-7.0.1 536 528 600 536 arm-linux-gnueabi-gcc-4.4.7 592 440 arm-linux-gnueabi-gcc-4.5.4 776 448 776 544 arm-linux-gnueabi-gcc-4.6.4 776 448 776 544 arm-linux-gnueabi-gcc-4.7.4 768 448 768 544 arm-linux-gnueabi-gcc-4.8.5 488 488 776 544 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 arm-linux-gnueabi-gcc-5.3.1 552 552 776 536 arm-linux-gnueabi-gcc-6.1.1 560 560 776 536 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 I did not do any runtime tests with serpent, so it is possible that stack frame size does not directly correlate with runtime performance here and it actually makes things worse, but it's more likely to help here, and the reduced stack frame size is probably enough reason to apply the patch, especially given that the crypto code is often used in deep call chains. Link: https://kernelci.org/build/id/58797d7559b5149efdf6c3a9/logs/ Link: http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11488 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149 Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Johan Hovold authored
commit 2e46565c upstream. A recent change claimed to fix an off-by-one error in the OOB-port completion handler, but instead introduced such an error. This could specifically led to modem-status changes going unnoticed, effectively breaking TIOCMGET. Note that the offending commit fixes a loop-condition underflow and is marked for stable, but should not be backported without this fix. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: 2d380889 ("USB: serial: digi_acceleport: fix OOB data sanity check") Signed-off-by:
-
Johan Hovold authored
commit 2d380889 upstream. Make sure to check for short transfers to avoid underflow in a loop condition when parsing the receive buffer. Also fix an off-by-one error in the incomplete sanity check which could lead to invalid data being parsed. Fixes: 8c209e67 ("USB: make actual_length in struct urb field u32") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Georgi Djakov authored
commit 2ec8258f upstream. Enable support for clocks, controlled by the RPM processor on Qualcomm platforms. Signed-off-by:
Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
William Breathitt Gray authored
commit ca8d8e03 upstream. The flag register is offset by 1 from the respective channel data register. This patch fixes an off-by-one error when attempting to read a channel flag register where the base address was not properly offset. Fixes: 28e5d3bb ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8") Signed-off-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
- 15 Mar, 2017 4 commits
-
-
Greg Kroah-Hartman authored
-
K. Y. Srinivasan authored
commit 372b1e91 upstream. The hypercall page only needs to be executable but currently it is setup to be writable as well. Fix the issue. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Acked-by:
Kees Cook <keescook@chromium.org> Reported-by:
Stephen Hemminger <stephen@networkplumber.org> Tested-by:
-
OGAWA Hirofumi authored
commit c0d0e351 upstream. Recently fallocate patch was merged and it uses MSDOS_I(inode)->mmu_private at fat_evict_inode(). However, fat_inode/fsinfo_inode that was introduced in past didn't initialize MSDOS_I(inode) properly. With those combinations, it became the cause of accessing random entry in FAT area. Link: http://lkml.kernel.org/r/87pohrj4i8.fsf@mail.parknet.co.jpSigned-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by:
Moreno Bartalucci <moreno.bartalucci@tecnorama.it> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dmitry Vyukov authored
commit 68fd814a upstream. We see reported stalls/lockups in quarantine_remove_cache() on machines with large amounts of RAM. quarantine_remove_cache() needs to scan whole quarantine in order to take out all objects belonging to the cache. Quarantine is currently 1/32-th of RAM, e.g. on a machine with 256GB of memory that will be 8GB. Moreover quarantine scanning is a walk over uncached linked list, which is slow. Add cond_resched() after scanning of each non-empty batch of objects. Batches are specifically kept of reasonable size for quarantine_put(). On a machine with 256GB of RAM we should have ~512 non-empty batches, each with 16MB of objects. Link: http://lkml.kernel.org/r/20170308154239.25440-1-dvyukov@google.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by:
-
