Conflicts:
	drivers/net/ethernet/altera/altera_sgdma.c
	net/netlink/af_netlink.c
	net/sched/cls_api.c
	net/sched/sch_api.c

The netlink conflict dealt with moving to netlink_capable() and
netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations
in non-init namespaces.  These were simple transformations from
netlink_capable to netlink_ns_capable.

The Altera driver conflict was simply code removal overlapping some
void pointer cast cleanups in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
Misc. fixes for cxgb4 and cxgb4vf driver

This series of patch provides fixes for cxgb4 and cxgb4vf driver related to
rx checksum counter and decodes module type a bit more for ethtool output.

The patches series is created against David Miller's 'net-next' tree.

We would like to request this patch series to get merged via David Miller's
'net-next' tree.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

the parameter rt will be assigned to c.arg in function fib6_clean_tree(),
but function fib6_prune_clone() doesn't use c.arg, so we can remove it
safely.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change ensures the driver can be built successfully without the
CONFIG_SYSFS flag.
MS-TFS: 182270
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix kconfig warnings:

PTP_1588_CLOCK selects NET_PTP_CLASSIFY, which depends on NET,
so PTP_1588_CLOCK should also depend on NET.

PTP_1588_CLOCK_PCH selects PTP_1588_CLOCK so the former should
depend on NET.

warning: (IXP4XX_ETH && PTP_1588_CLOCK) selects NET_PTP_CLASSIFY which has unmet direct dependencies (NET)

warning: (SFC && TILE_NET && BFIN_MAC_USE_HWSTAMP && TIGON3 && FEC && E1000E && IGB && IXGBE && I40E && MLX4_EN && SXGBE_ETH && STMMAC_ETH && TI_CPTS && PTP_1588_CLOCK_GIANFAR && PTP_1588_CLOCK_IXP46X && DP83640_PHY && PTP_1588_CLOCK_PCH) selects PTP_1588_CLOCK which has unmet direct dependencies (NET)
[This warning is caused by the new 'depends on NET' in PTP_1588_CLOCK.]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
BPF testsuite and cleanup

This patchset adds BPF testsuite and improves readability of classic
to internal BPF converter.

The testsuite helped to find 'negative offset bug' in x64 JIT that was
fixed by commit fdfaf64e ("x86: bpf_jit: support negative offsets")

It can be very useful for classic and internal JIT compiler developers.
Also it serves as performance benchmark.

x86_64/i386 pass all tests with and without JIT. arm32 JIT is failing
negative offset tests which are unsupported.

Internal BPF tests are much larger than classic tests to cover different
combinations of registers. Negative tests check correctness of classic
BPF verifier which must reject them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

All tests should pass with and without JIT.

Example output:
test_bpf: #0 TAX 35 16 16 PASS
test_bpf: #1 TXA 7 7 7 PASS
test_bpf: #2 ADD_SUB_MUL_K 10 PASS
test_bpf: #3 DIV_KX 33 PASS
test_bpf: #4 AND_OR_LSH_K 10 10 PASS
test_bpf: #5 LD_IND 8 8 8 PASS
test_bpf: #6 LD_ABS 8 8 8 PASS
test_bpf: #7 LD_ABS_LL 13 14 PASS
test_bpf: #8 LD_IND_LL 12 12 12 PASS
test_bpf: #9 LD_ABS_NET 10 12 PASS
test_bpf: #10 LD_IND_NET 11 12 12 PASS
...

Numbers are times in nsec per filter for given input data.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The testsuite covers classic and internal BPF instructions.
It is particularly useful for JIT compiler developers.
Adds to "net" selftest target.

The testsuite can be used as a set of micro-benchmarks.
It measures execution time of each BPF program in nsec.

This patch adds core framework.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce BPF helper macros to define instructions
(similar to old BPF_STMT/BPF_JUMP macros)

Use them while converting classic BPF to internal
and in BPF testsuite later.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

John W. Linville says:

====================
pull request: wireless 2014-05-08

This one is all from Johannes:

"Here are a few small fixes for the current cycle: radiotap TX flags were
wrong (fix by Bob), Chun-Yeow fixes an SMPS issue with mesh interfaces,
Eliad fixes a locking bug and a cfg80211 state problem and finally
Henning sent me a fix for IBSS rate information."

Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Wang Weidong says:

====================
sctp: fix kfree static array pointer in sctp_sysctl_net_unregister

patch #1 revert the efb842c4("sctp: optimize the sctp_sysctl_net_register")
patch #2 add a checking for sctp_sysctl_net_register
====================
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When register_net_sysctl failed, we should free the
sysctl_table.
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This revert commit efb842c4("sctp: optimize the sctp_sysctl_net_register"),
Since it doesn't kmemdup a sysctl_table for init_net, so the
init_net->sctp.sysctl_header->ctl_table_arg points to sctp_net_table
which is a static array pointer. So when doing sctp_sysctl_net_unregister,
it will free sctp_net_table, then we will get a NULL pointer dereference
like that:

[  262.948220] BUG: unable to handle kernel NULL pointer dereference at 000000000000006c
[  262.948232] IP: [<ffffffff81144b70>] kfree+0x80/0x420
[  262.948260] PGD db80a067 PUD dae12067 PMD 0
[  262.948268] Oops: 0000 [#1] SMP
[  262.948273] Modules linked in: sctp(-) crc32c_generic libcrc32c
...
[  262.948338] task: ffff8800db830190 ti: ffff8800dad00000 task.ti: ffff8800dad00000
[  262.948344] RIP: 0010:[<ffffffff81144b70>]  [<ffffffff81144b70>] kfree+0x80/0x420
[  262.948353] RSP: 0018:ffff8800dad01d88  EFLAGS: 00010046
[  262.948358] RAX: 0100000000000000 RBX: ffffffffa0227940 RCX: ffffea0000707888
[  262.948363] RDX: ffffea0000707888 RSI: 0000000000000001 RDI: ffffffffa0227940
[  262.948369] RBP: ffff8800dad01de8 R08: 0000000000000000 R09: ffff8800d9e983a9
[  262.948374] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0227940
[  262.948380] R13: ffffffff8187cfc0 R14: 0000000000000000 R15: ffffffff8187da10
[  262.948386] FS:  00007fa2a2658700(0000) GS:ffff880112800000(0000) knlGS:0000000000000000
[  262.948394] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  262.948400] CR2: 000000000000006c CR3: 00000000cddc0000 CR4: 00000000000006e0
[  262.948410] Stack:
[  262.948413]  ffff8800dad01da8 0000000000000286 0000000020227940 ffffffffa0227940
[  262.948422]  ffff8800dad01dd8 ffffffff811b7fa1 ffffffffa0227940 ffffffffa0227940
[  262.948431]  ffffffff8187d960 ffffffff8187cfc0 ffffffff8187d960 ffffffff8187da10
[  262.948440] Call Trace:
[  262.948457]  [<ffffffff811b7fa1>] ? unregister_sysctl_table+0x51/0xa0
[  262.948476]  [<ffffffffa020d1a1>] sctp_sysctl_net_unregister+0x21/0x30 [sctp]
[  262.948490]  [<ffffffffa020ef6d>] sctp_net_exit+0x12d/0x150 [sctp]
[  262.948512]  [<ffffffff81394f49>] ops_exit_list+0x39/0x60
[  262.948522]  [<ffffffff813951ed>] unregister_pernet_operations+0x3d/0x70
[  262.948530]  [<ffffffff81395292>] unregister_pernet_subsys+0x22/0x40
[  262.948544]  [<ffffffffa020efcc>] sctp_exit+0x3c/0x12d [sctp]
[  262.948562]  [<ffffffff810c5e04>] SyS_delete_module+0x194/0x210
[  262.948577]  [<ffffffff81240fde>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  262.948587]  [<ffffffff815217a2>] system_call_fastpath+0x16/0x1b

With this revert, it won't occur the Oops.
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 6d48f44b "mdio_bus: implement devm_mdiobus_alloc/devm_mdiobus_free"
introduced a new function devm_mdiobus_alloc_size() but added an export
for a different function devm_mdiobus_alloc(), which was obviously
a simple mistake that leads to  build error whenever this function is
used from a loadable module:

ERROR: "devm_mdiobus_alloc_size" [drivers/net/ethernet/ti/davinci_mdio.ko] undefined!
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the cas_lock_tx function we acquire multiple locks in a loop and
need to use nested lock annotation to prevent lockdep warnings.
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce a generic option store function for sysfs and remove the
specific ones. The attribute name is used to match against the option
which is to be set.
Also adjust the "name" of tlb_dynamic_lb option to match the sysfs
entry and fix the comments and comment style in bond_sysfs.c
The comments which showed obvious behaviour (i.e. behaviour that's seen
in the option's entry) are removed, the ones that explained important
points about the setting function have been moved above the respective
set function in bond_options.c

There's only 1 exception: num_unsol_na/num_grat_arp since it has 2 names

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 91ebb928b "bnx2x: Add support for Multi-Function UNDI" contains a bug
which prevent the emptying of the device's Rx buffers before reset.
As a result, on new boards it is likely HW will reach some fatal assertion
once its interfaces load after UNDI was previously loaded.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

unregister_net_sysctl_table will check the ctl_table_header,
so remove the unneed checking
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Johan Hovold says:

====================
net: cpsw and mdio-gpio fixes for v3.15-final

These patches against v3.15-rc4 fix a few issues in the cpsw and
mdio-gpio drivers.

Resend with proper stable CC (git send-email still fails to parse the

Sorry about the noise.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add missing of_node_put to avoid kref leak.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix null-pointer dereference at probe when the mdio platform device is
missing (e.g. when it has been disabled in DT).

Cc: stable <stable@vger.kernel.org>	# v3.8
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit f8d56d8f ("net:
 eth: cpsw: Correctly attach to GPIO bitbang MDIO driver").

Fix potential null-pointer dereference at probe if the mdio-gpio device
has not been successfully probed yet.

The offending commit is plain wrong for a number of reasons. First of
all it accesses internal driver data of an unrelated device. Neither
does it check that the data is non-null (which it is in case the device
has not been probed yet).

Furthermore, the decision on whether to treat any driver data according
to the mdio-gpio driver's internals is made based on the node name. But
the name is not compared against "mdio" which is the normal name for the
node, but rather against "gpio" which the node does not have to be named
(and shouldn't be according to the binding documentation). [ If this
hack is to be kept out-of-tree it should at least be matching against
the compatible property. ]

Cc: Stefan Roese <sr@denx.de>
Cc: stable <stable@vger.kernel.org>	# v3.14
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use a sane default bus id (rather than -ENODEV) and print a warning when
the bus alias id is missing.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix aliases syntax in device-tree binding example to avoid
copy-paste errors (the alias would be dropped silently).
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This driver maps 802.1q VLANs to MBIM sessions. The mapping is based on
a bogus assumption that all tagged frames will use the acceleration API
because we enable NETIF_F_HW_VLAN_CTAG_TX. This fails for e.g. frames
tagged in userspace using packet sockets. Such frames will erroneously
be considered as untagged and silently dropped based on not being IP.

Fix by falling back to looking into the ethernet header for a tag if no
accelerated tag was found.

Fixes: a82c7ce5 ("net: cdc_ncm: map MBIM IPS SessionID to VLAN ID")
Cc: Greg Suarez <gsuarez@smithmicro.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following batch contains netfilter fixes for your net tree, they are:

1) Fix use after free in nfnetlink when sending a batch for some
   unsupported subsystem, from Denys Fedoryshchenko.

2) Skip autoload of the nat module if no binding is specified via
   ctnetlink, from Florian Westphal.

3) Set local_df after netfilter defragmentation to avoid a bogus ICMP
   fragmentation needed in the forwarding path, also from Florian.

4) Fix potential user after free in ip6_route_me_harder() when returning
   the error code to the upper layers, from Sergey Popovich.

5) Skip possible bogus ICMP time exceeded emitted from the router (not
   valid according to RFC) if conntrack zones are used, from Vasily Averin.

6) Fix fragment handling when nf_defrag_ipv4 is loaded but nf_conntrack
   is not present, also from Vasily.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Sathya Perla says:

====================
be2net: patch set

This patch set contains the following modificatons:
* three patches (1/7 to 3/7) that fix indentation style issues
* convert the u8 vlan[] array to a bit-map to reduce memory usage
* use MCCQ instead of MBOX in be_cmd_rss_config() as the MCCQ is already
  created by that time
* include rx-comp-error counter in ethtool stats
* remove the unused promiscuous setting from be_cmd_vlan_config()

Pls apply to net-next tree. Thanks!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

be_cmd_rss_config() is called after the MCCQ is created; so this cmd is
now modified to use the MCCQ instead of MBOX. Also fixed some indentation
problem in this routine.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For putting interface into vlan promiscuous mode, we use be_cmd_rx_filter()
and not be_cmd_vlan_config(). So remove the "promiscuous" argument from
be_cmd_vlan_config().
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch converts the vlan u8[] used to track vlan-id
membership to a bit-map as it reduces memory usage.
Signed-off-by: Ravikumar Nelavelli <ravikumar.nelavelli@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a funtion definition or a function call spans more than one
line, ensure that the first argument on the subsequent lines is
aligned to the first column after the opening paranthesis of the
function call.

Also removes unnecessary line wrap.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a funtion definition or a function call spans more than one
line, ensure that the first argument on the subsequent lines is
aligned to the first column after the opening paranthesis of the
function call.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a funtion definition or a function call spans more than one
line, ensure that the first argument on the subsequent lines is
aligned to the first column after the opening paranthesis of the
function call.

Also remove unnecessary line wrap.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rajesh Borundia says:

====================
qlcnic: SR-IOV and FW-dump enhancements

This patch series contain following enhancements.

* SR-IOV enhancements:
 - Allow SR-IOV VF's to probe in hypervisor. SR-IOV VF can be
   uplinked to bridge/macvtap device with this change.
 - Commands from VF are processed in process context
   as it may sleep during PF-VF communication. Earlier
   we use to process qlcnic_sriov_vf_set_multi function in
   process context but now we process individual commands.
 - As SR-IOV VF's can be uplinked to bridge/macvtap device
   support mac-learning to allow communication through
   embedded switch.

* FW-dump enhancement:
 - Support to collect RDMEM section of firmware dump using
   PEX DMA method for 82xx series adapter.

* Changes in v2:
 - Removed unnecessary cast from void pointer to something
   else and verified this issue in entire patch series as
   per David Miller's suggestion.

Please apply this series to net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Add support to collect RDMEM section of firmware dump
  using PEX DMA method.
o This patch uses most of the code used for PEX DMA support
  on 83xx series adapters and some refactoring.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>