- 20 Mar, 2020 40 commits
-
-
Sven Eckelmann authored
commit 9e6b5648 upstream. The state of slave interfaces are handled differently depending on whether the interface is up or not. All active interfaces (IFF_UP) will transmit OGMs. But for B.A.T.M.A.N. IV, also non-active interfaces are scheduling (low TTL) OGMs on active interfaces. The code which setups and schedules the OGMs must therefore already be called when the interfaces gets added as slave interface and the transmit function must then check whether it has to send out the OGM or not on the specific slave interface. But the commit f0d97253 ("batman-adv: remove ogm_emit and ogm_schedule API calls") moved the setup code from the enable function to the activate function. The latter is called either when the added slave was already up when batadv_hardif_enable_interface processed the new interface or when a NETDEV_UP event was received for this slave interfac. As result, each NETDEV_UP would schedule a new OGM worker for the interface and thus OGMs would be send a lot more than expected. Fixes: f0d97253 ("batman-adv: remove ogm_emit and ogm_schedule API calls") Reported-by:
Linus Lüssing <linus.luessing@c0d3.blue> Tested-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sven Eckelmann authored
commit dff9bc42 upstream. The function batadv_gw_node_add is responsible for adding new gw_node to the gateway_list. It is expecting that the caller already checked that there is not already an entry with the same key or not. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: c6c8fea2 ("net: Add batman-adv meshing protocol") Signed-off-by:
-
Linus Lüssing authored
commit a44ebeff upstream. When a (broken) node wrongly sends multicast TT entries with a ROAM flag then this causes any receiving node to drop all entries for the same multicast MAC address announced by other nodes, leading to packet loss. Fix this DoS vector by only storing TT sync flags. For multicast TT non-sync'ing flag bits like ROAM are unused so far anyway. Fixes: 1d8ab8d3 ("batman-adv: Modified forwarding behaviour for multicast packets") Reported-by:
Leonardo Mörlein <me@irrelefant.net> Signed-off-by:
-
Linus Lüssing authored
commit 4a519b83 upstream. Since commit 54e22f26 ("batman-adv: fix TT sync flag inconsistencies") TT sync flags and TT non-sync'd flags are supposed to be stored separately. The previous patch missed to apply this separation on a TT entry with only a single TT orig entry. This is a minor fix because with only a single TT orig entry the DDoS issue the former patch solves does not apply. Fixes: 54e22f26 ("batman-adv: fix TT sync flag inconsistencies") Signed-off-by:
-
Sven Eckelmann authored
commit 6da7be7d upstream. batman-adv is creating special debugfs directories in the init net_namespace for each created soft-interface (batadv net_device). But it is possible to rename a net_device to a completely different name then the original one. It can therefore happen that a user registers a new batadv net_device with the name "bat0". batman-adv is then also adding a new directory under $debugfs/batman-adv/ with the name "wlan0". The user then decides to rename this device to "bat1" and registers a different batadv device with the name "bat0". batman-adv will then try to create a directory with the name "bat0" under $debugfs/batman-adv/ again. But there already exists one with this name under this path and thus this fails. batman-adv will detect a problem and rollback the registering of this device. batman-adv must therefore take care of renaming the debugfs directories for soft-interfaces whenever it detects such a net_device rename. Fixes: c6c8fea2 ("net: Add batman-adv meshing protocol") Signed-off-by:
-
Sven Eckelmann authored
commit 36dc621c upstream. batman-adv is creating special debugfs directories in the init net_namespace for each valid hard-interface (net_device). But it is possible to rename a net_device to a completely different name then the original one. It can therefore happen that a user registers a new net_device which gets the name "wlan0" assigned by default. batman-adv is also adding a new directory under $debugfs/batman-adv/ with the name "wlan0". The user then decides to rename this device to "wl_pri" and registers a different device. The kernel may now decide to use the name "wlan0" again for this new device. batman-adv will detect it as a valid net_device and tries to create a directory with the name "wlan0" under $debugfs/batman-adv/. But there already exists one with this name under this path and thus this fails. batman-adv will detect a problem and rollback the registering of this device. batman-adv must therefore take care of renaming the debugfs directories for hard-interfaces whenever it detects such a net_device rename. Fixes: 5bc7c1eb ("batman-adv: add debugfs structure for information per interface") Reported-by:
John Soros <sorosj@gmail.com> Signed-off-by:
-
Marek Lindner authored
commit 16116dac upstream. A translation table TVLV changset sent with an OGM consists of a number of headers (one per VLAN) plus the changeset itself (addition and/or deletion of entries). The per-VLAN headers are used by OGM recipients for consistency checks. Said consistency check might determine that a full translation table request is needed to restore consistency. If the TT sender adds per-VLAN headers of empty VLANs into the OGM, recipients are led to believe to have reached an inconsistent state and thus request a full table update. The full table does not contain empty VLANs (due to missing entries) the cycle restarts when the next OGM is issued. Consequently, when the translation table TVLV headers are composed, empty VLANs are to be excluded. Fixes: 21a57f6e7a3b ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by:
-
Linus Lüssing authored
commit 7072337e upstream. The previous TT sync fix so far only fixed TT responses issued by the target node directly. So far, TT responses issued by intermediate nodes still lead to the wrong flags being added, leading to CRC mismatches. This behaviour was observed at Freifunk Hannover in a 800 nodes setup where a considerable amount of nodes were still infected with 'WI' TT flags even with (most) nodes having the previous TT sync fix applied. I was able to reproduce the issue with intermediate TT responses in a four node test setup and this patch fixes this issue by ensuring to use the per originator instead of the summarized, OR'd ones. Fixes: e9c00136 ("batman-adv: fix tt_global_entries flags update") Reported-by:
-
Sven Eckelmann authored
commit 8ba0f9bd upstream. The functions batadv_tt_prepare_tvlv_local_data and batadv_tt_prepare_tvlv_global_data are responsible for preparing a buffer which can be used to store the TVLV container for TT and add the VLAN information to it. This will be done in three phases: 1. count the number of VLANs and their entries 2. allocate the buffer using the counters from the previous step and limits from the caller (parameter tt_len) 3. insert the VLAN information to the buffer The step 1 and 3 operate on a list which contains the VLANs. The access to these lists must be protected with an appropriate lock or otherwise they might operate on on different entries. This could for example happen when another context is adding VLAN entries to this list. This could lead to a buffer overflow in these functions when enough entries were added between step 1 and 3 to the VLAN lists that the buffer room for the entries (*tt_change) is smaller then the now required extra buffer for new VLAN entries. Fixes: 7ea7b4a1 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
-
Sven Eckelmann authored
commit f22e0893 upstream. batman-adv uses internal indices for each enabled and active interface. It is currently used by the B.A.T.M.A.N. IV algorithm to identifify the correct position in the ogm_cnt bitmaps. The type for the number of enabled interfaces (which defines the next interface index) was set to char. This type can be (depending on the architecture) either signed (limiting batman-adv to 127 active slave interfaces) or unsigned (limiting batman-adv to 255 active slave interfaces). This limit was not correctly checked when an interface was enabled and thus an overflow happened. This was only catched on systems with the signed char type when the B.A.T.M.A.N. IV code tried to resize its counter arrays with a negative size. The if_num interface index was only a s16 and therefore significantly smaller than the ifindex (int) used by the code net code. Both &batadv_hard_iface->if_num and &batadv_priv->num_ifaces must be (unsigned) int to support the same number of slave interfaces as the net core code. And the interface activation code must check the number of active slave interfaces to avoid integer overflows. Fixes: c6c8fea2 ("net: Add batman-adv meshing protocol") Signed-off-by:
-
Sven Eckelmann authored
commit 5ba7dcfe upstream. The originator node object orig_neigh_node is used to when accessing the bcast_own(_sum) and real_packet_count information. The access to them has to be protected with the spinlock in orig_neigh_node. But the function uses the lock in orig_node instead. This is incorrect because they could be two different originator node objects. Fixes: 0ede9f41 ("batman-adv: protect bit operations to count OGMs with spinlock") Signed-off-by:
-
Sven Eckelmann authored
commit 198a62dd upstream. The batadv_v_gw_is_eligible function already assumes that orig_node is not NULL. But batadv_gw_node_get may have failed to find the originator. It must therefore be checked whether the batadv_gw_node_get failed and not whether orig_node is NULL to detect this error. Fixes: 50164d8f ("batman-adv: B.A.T.M.A.N. V - implement GW selection logic") Signed-off-by:
Sven Eckelmann <sven.eckelmann@openmesh.com> Acked-by:
-
Sven Eckelmann authored
commit fe77d825 upstream. The batman-adv unuicast fragment header contains 3 bits for the priority of the packet. These bits will be initialized when the skb->priority contains a value between 256 and 263. But otherwise, the uninitialized bits from the stack will be used. Fixes: c0f25c80 ("batman-adv: Include frame priority in fragment header") Signed-off-by:
Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by:
-
Sven Eckelmann authored
commit 6a4bc44b upstream. The neighbor compare API implementation for B.A.T.M.A.N. V checks whether the neigh_ifinfo for this neighbor on a specific interface exists. A warning is printed when it isn't found. But it is not called inside a lock which would prevent that this information is lost right before batadv_neigh_ifinfo_get. It must therefore be expected that batadv_v_neigh_(cmp|is_sob) might not be able to get the requested neigh_ifinfo. A WARN_ON for such a situation seems not to be appropriate because this will only flood the kernel logs. The warnings must therefore be removed. Signed-off-by:
-
Linus Lüssing authored
commit 54e22f26 upstream. This patch fixes an issue in the translation table code potentially leading to a TT Request + Response storm. The issue may occur for nodes involving BLA and an inconsistent configuration of the batman-adv AP isolation feature. However, since the new multicast optimizations, a single, malformed packet may lead to a mesh-wide, persistent Denial-of-Service, too. The issue occurs because nodes are currently OR-ing the TT sync flags of all originators announcing a specific MAC address via the translation table. When an intermediate node now receives a TT Request and wants to answer this on behalf of the destination node, then this intermediate node now responds with an altered flag field and broken CRC. The next OGM of the real destination will lead to a CRC mismatch and triggering a TT Request and Response again. Furthermore, the OR-ing is currently never undone as long as at least one originator announcing the according MAC address remains, leading to the potential persistency of this issue. This patch fixes this issue by storing the flags used in the CRC calculation on a a per TT orig entry basis to be able to respond with the correct, original flags in an intermediate TT Response for one thing. And to be able to correctly unset sync flags once all nodes announcing a sync flag vanish for another. Fixes: e9c00136 ("batman-adv: fix tt_global_entries flags update") Signed-off-by:
-
Sven Eckelmann authored
commit d6289088 upstream. The wifi driver can decide to not provide parts of the station info. For example, the expected throughput of the station can be omitted when the used rate control doesn't provide this kind of information. The B.A.T.M.A.N. V implementation must therefore check the filled bitfield before it tries to access the expected_throughput of the returned station_info. Reported-by:
Alvaro Antelo <alvaro.antelo@gmail.com> Fixes: c833484e ("batman-adv: ELP - compute the metric based on the estimated throughput") Signed-off-by:
-
Sven Eckelmann authored
commit 3f3f8732 upstream. A wifi interface should never be handled like an ethernet devices. The parser of the cfg80211 output must therefore skip the ethtool code when cfg80211_get_station returned an error. Fixes: f44a3ae9 ("batman-adv: refactor wifi interface detection") Signed-off-by:
-
Sven Eckelmann authored
commit 36d4d68c upstream. The stats are generated by batadv_interface_stats and must not be stored directly in the net_device stats member variable. The batadv_priv bat_counters information is assembled when ndo_get_stats is called. The stats previously stored in net_device::stats is then overwritten. The batman-adv counters must therefore be increased when an ARP packet is answered locally via the distributed arp table. Fixes: c384ea3e ("batman-adv: Distributed ARP Table - add snooping functions for ARP messages") Signed-off-by:
-
Sven Eckelmann authored
commit 1a9070ec upstream. The gateway selection class variable is shared between different algorithm versions. But the interpretation of the content is algorithm specific. The initialization is therefore also algorithm specific. But this was implemented incorrectly and the initialization for BATMAN_V always overwrote the value previously written for BATMAN_IV. This could only be avoided when BATMAN_V was disabled during compile time. Using a special batadv_algo hook for this initialization avoids this problem. Fixes: 50164d8f ("batman-adv: B.A.T.M.A.N. V - implement GW selection logic") Signed-off-by:
-
Linus Lüssing authored
commit 51c6b429 upstream. Trying to split and transmit a unicast packet in 16 parts will fail for the final fragment: After having sent the 15th one with a frag_packet.no index of 14, we will increase the the index to 15 - and return with an error code immediately, even though one more fragment is due for transmission and allowed. Fixing this issue by moving the check before incrementing the index. While at it, adding an unlikely(), because the check is actually more of an assertion. Fixes: ee75ed88 ("batman-adv: Fragment and send skbs larger than mtu") Signed-off-by:
-
Sven Eckelmann authored
commit 248e23b5 upstream. The function batadv_frag_skb_buffer was supposed not to consume the skbuff on errors. This was followed in the helper function batadv_frag_insert_packet when the skb would potentially be inserted in the fragment queue. But it could happen that the next helper function batadv_frag_merge_packets would try to merge the fragments and fail. This results in a kfree_skb of all the enqueued fragments (including the just inserted one). batadv_recv_frag_packet would detect the error in batadv_frag_skb_buffer and try to free the skb again. The behavior of batadv_frag_skb_buffer (and its helper batadv_frag_insert_packet) must therefore be changed to always consume the skbuff to have a common behavior and avoid the double kfree_skb. Fixes: 610bfc6b ("batman-adv: Receive fragmented packets and merge") Signed-off-by:
-
Vladis Dronov authored
commit d6c066fd upstream. Add a sanity check to efivar_store_raw() the same way efivar_{attr,size,data}_read() and efivar_show_raw() have it. Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200305084041.24053-3-vdronov@redhat.com Link: https://lore.kernel.org/r/20200308080859.21568-25-ardb@kernel.orgSigned-off-by:
-
Eric Dumazet authored
commit b6f61189 upstream. IPV6_ADDRFORM is able to transform IPv6 socket to IPv4 one. While this operation sounds illogical, we have to support it. One of the things it does for TCP socket is to switch sk->sk_prot to tcp_prot. We now have other layers playing with sk->sk_prot, so we should make sure to not interfere with them. This patch makes sure sk_prot is the default pointer for TCP IPv6 socket. syzbot reported : BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD a0113067 P4D a0113067 PUD a8771067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 0 PID: 10686 Comm: syz-executor.0 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Bad RIP value. RSP: 0018:ffffc9000281fce0 EFLAGS: 00010246 RAX: 1ffffffff15f48ac RBX: ffffffff8afa4560 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880a69a8f40 RBP: ffffc9000281fd10 R08: ffffffff86ed9b0c R09: ffffed1014d351f5 R10: ffffed1014d351f5 R11: 0000000000000000 R12: ffff8880920d3098 R13: 1ffff1101241a613 R14: ffff8880a69a8f40 R15: 0000000000000000 FS: 00007f2ae75db700(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000a3b85000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: inet_release+0x165/0x1c0 net/ipv4/af_inet.c:427 __sock_release net/socket.c:605 [inline] sock_close+0xe1/0x260 net/socket.c:1283 __fput+0x2e4/0x740 fs/file_table.c:280 ____fput+0x15/0x20 fs/file_table.c:313 task_work_run+0x176/0x1b0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop arch/x86/entry/common.c:164 [inline] prepare_exit_to_usermode+0x480/0x5b0 arch/x86/entry/common.c:195 syscall_return_slowpath+0x113/0x4a0 arch/x86/entry/common.c:278 do_syscall_64+0x11f/0x1c0 arch/x86/entry/common.c:304 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45c429 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2ae75dac78 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: 0000000000000000 RBX: 00007f2ae75db6d4 RCX: 000000000045c429 RDX: 0000000000000001 RSI: 000000000000011a RDI: 0000000000000004 RBP: 000000000076bf20 R08: 0000000000000038 R09: 0000000000000000 R10: 0000000020000180 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000a9d R14: 00000000004ccfb4 R15: 000000000076bf2c Modules linked in: CR2: 0000000000000000 ---[ end trace 82567b5207e87bae ]--- RIP: 0010:0x0 Code: Bad RIP value. RSP: 0018:ffffc9000281fce0 EFLAGS: 00010246 RAX: 1ffffffff15f48ac RBX: ffffffff8afa4560 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880a69a8f40 RBP: ffffc9000281fd10 R08: ffffffff86ed9b0c R09: ffffed1014d351f5 R10: ffffed1014d351f5 R11: 0000000000000000 R12: ffff8880920d3098 R13: 1ffff1101241a613 R14: ffff8880a69a8f40 R15: 0000000000000000 FS: 00007f2ae75db700(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000a3b85000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by: syzbot+1938db17e275e85dc328@syzkaller.appspotmail.com Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Daniel Drake authored
commit da72a379 upstream. VMD subdevices are created with a PCI domain ID of 0x10000 or higher. These subdevices are also handled like all other PCI devices by dmar_pci_bus_notifier(). However, when dmar_alloc_pci_notify_info() take records of such devices, it will truncate the domain ID to a u16 value (in info->seg). The device at (e.g.) 10000:00:02.0 is then treated by the DMAR code as if it is 0000:00:02.0. In the unlucky event that a real device also exists at 0000:00:02.0 and also has a device-specific entry in the DMAR table, dmar_insert_dev_scope() will crash on: BUG_ON(i >= devices_cnt); That's basically a sanity check that only one PCI device matches a single DMAR entry; in this case we seem to have two matching devices. Fix this by ignoring devices that have a domain number higher than what can be looked up in the DMAR table. This problem was carefully diagnosed by Jian-Hong Pan. Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Daniel Drake <drake@endlessm.com> Fixes: 59ce0515 ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens") Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Zhenzhong Duan authored
commit b0bb0c22 upstream. When base address in RHSA structure doesn't match base address in each DRHD structure, the base address in last DRHD is printed out. This doesn't make sense when there are multiple DRHD units, fix it by printing the buggy RHSA's base address. Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@gmail.com> Fixes: fd0c8894 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables") Signed-off-by:
-
qize wang authored
commit 1e58252e upstream. mwifiex_process_tdls_action_frame() without checking the incoming tdls infomation element's vality before use it, this may cause multi heap buffer overflows. Fix them by putting vality check before use it. IE is TLV struct, but ht_cap and ht_oper aren’t TLV struct. the origin marvell driver code is wrong: memcpy(&sta_ptr->tdls_cap.ht_oper, pos,.... memcpy((u8 *)&sta_ptr->tdls_cap.ht_capb, pos,... Fix the bug by changing pos(the address of IE) to pos+2 ( the address of IE value ). Signed-off-by:
qize wang <wangqize888888888@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Matthias Maennich <maennich@google.com> Signed-off-by:
-
Jakub Kicinski authored
commit c049b345 upstream. Add missing attribute validation for cthelper to the netlink policy. Fixes: 12f7a505 ("netfilter: add user-space connection tracking helper infrastructure") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jakub Kicinski authored
commit 5cde05c6 upstream. Add missing attribute validation for NL80211_ATTR_OPER_CLASS to the netlink policy. Fixes: 1057d35e ("cfg80211: introduce TDLS channel switch commands") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jakub Kicinski authored
commit 056e9375 upstream. Add missing attribute validation for beacon report scanning to the netlink policy. Fixes: 1d76250b ("nl80211: support beacon report scanning") Signed-off-by:
-
Jakub Kicinski authored
commit 0e1a1d85 upstream. Add missing attribute validation for critical protocol fields to the netlink policy. Fixes: 5de17984 ("cfg80211: introduce critical protocol indication from user-space") Signed-off-by:
-
Yonghyun Hwang authored
commit 77a1bce8 upstream. intel_iommu_iova_to_phys() has a bug when it translates an IOVA for a huge page onto its corresponding physical address. This commit fixes the bug by accomodating the level of page entry for the IOVA and adds IOVA's lower address to the physical address. Cc: <stable@vger.kernel.org> Acked-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
Yonghyun Hwang <yonghyun@google.com> Fixes: 38717946 ("VT-d: Changes to support KVM") Signed-off-by:
-
Hans de Goede authored
commit 59833696 upstream. Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Some distros, e.g. Fedora, have tools watching for the kernel backtraces logged by the WARN macros and offer the user an option to file a bug for this when these are encountered. The WARN_TAINT in warn_invalid_dmar() + another iommu WARN_TAINT, addressed in another patch, have lead to over a 100 bugs being filed this way. This commit replaces the WARN_TAINT("...") calls, with pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) calls avoiding the backtrace and thus also avoiding bug-reports being filed about this against the kernel. Fixes: fd0c8894 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables") Fixes: e625b4a9 ("iommu/vt-d: Parse ANDD records") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Vladis Dronov authored
commit 286d3250 upstream. There is a race and a buffer overflow corrupting a kernel memory while reading an EFI variable with a size more than 1024 bytes via the older sysfs method. This happens because accessing struct efi_variable in efivar_{attr,size,data}_read() and friends is not protected from a concurrent access leading to a kernel memory corruption and, at best, to a crash. The race scenario is the following: CPU0: CPU1: efivar_attr_read() var->DataSize = 1024; efivar_entry_get(... &var->DataSize) down_interruptible(&efivars_lock) efivar_attr_read() // same EFI var var->DataSize = 1024; efivar_entry_get(... &var->DataSize) down_interruptible(&efivars_lock) virt_efi_get_variable() // returns EFI_BUFFER_TOO_SMALL but // var->DataSize is set to a real // var size more than 1024 bytes up(&efivars_lock) virt_efi_get_variable() // called with var->DataSize set // to a real var size, returns // successfully and overwrites // a 1024-bytes kernel buffer up(&efivars_lock) This can be reproduced by concurrent reading of an EFI variable which size is more than 1024 bytes: ts# for cpu in $(seq 0 $(nproc --ignore=1)); do ( taskset -c $cpu \ cat /sys/firmware/efi/vars/KEKDefault*/size & ) ; done Fix this by using a local variable for a var's data buffer size so it does not get overwritten. Fixes: e14ab23d ("efivars: efivar_entry API") Reported-by: Bob Sanders <bob.sanders@hpe.com> and the LTP testsuite Signed-off-by:
-
Eugeniy Paltsev authored
commit 8d92e992 upstream. The default defintions use fill pattern 0x90 for padding which for ARC generates unintended "ldh_s r12,[r0,0x20]" corresponding to opcode 0x9090 So use ".align 4" which insert a "nop_s" instruction instead. Cc: stable@vger.kernel.org Acked-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 342993f9 upstream. After commit 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode") Hyper-V guests on KVM stopped booting with: kvm_nested_vmexit: rip fffff802987d6169 reason EPT_VIOLATION info1 181 info2 0 int_info 0 int_info_err 0 kvm_page_fault: address febd0000 error_code 181 kvm_emulate_insn: 0:fffff802987d6169: f3 a5 kvm_emulate_insn: 0:fffff802987d6169: f3 a5 FAIL kvm_inj_exception: #UD (0x0) "f3 a5" is a "rep movsw" instruction, which should not be intercepted at all. Commit c44b4c6a ("KVM: emulate: clean up initializations in init_decode_cache") reduced the number of fields cleared by init_decode_cache() claiming that they are being cleared elsewhere, 'intercept', however, is left uncleared if the instruction does not have any of the "slow path" flags (NotImpl, Stack, Op3264, Sse, Mmx, CheckPerm, NearBranch, No16 and of course Intercept itself). Fixes: c44b4c6a ("KVM: emulate: clean up initializations in init_decode_cache") Fixes: 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode") Cc: stable@vger.kernel.org Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Al Viro authored
commit 21039132 upstream. with the way fs/namei.c:do_last() had been done, ->atomic_open() instances needed to recognize the case when existing file got found with O_EXCL|O_CREAT, either by falling back to finish_no_open() or failing themselves. gfs2 one didn't. Fixes: 6d4ade98 (GFS2: Add atomic_open support) Cc: stable@kernel.org # v3.11 Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit d9a9f484 upstream. several iterations of ->atomic_open() calling conventions ago, we used to need fput() if ->atomic_open() failed at some point after successful finish_open(). Now (since 2016) it's not needed - struct file carries enough state to make fput() work regardless of the point in struct file lifecycle and discarding it on failure exits in open() got unified. Unfortunately, I'd missed the fact that we had an instance of ->atomic_open() (cifs one) that used to need that fput(), as well as the stale comment in finish_open() demanding such late failure handling. Trivially fixed... Fixes: fe9ec829 "do_last(): take fput() on error after opening to out:" Cc: stable@kernel.org # v4.7+ Signed-off-by:
-
Colin Ian King authored
commit d785476c upstream. Variable grph_obj_type is being assigned twice, one of these is redundant so remove it. Addresses-Coverity: ("Evaluation order violation") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Hillf Danton authored
commit aa202f1f upstream. wq_select_unbound_cpu() is designed for unbound workqueues only, but it's wrongly called when using a bound workqueue too. Fixing this ensures work queued to a bound workqueue with cpu=WORK_CPU_UNBOUND always runs on the local CPU. Before, that would happen only if wq_unbound_cpumask happened to include it (likely almost always the case), or was empty, or we got lucky with forced round-robin placement. So restricting /sys/devices/virtual/workqueue/cpumask to a small subset of a machine's CPUs would cause some bound work items to run unexpectedly there. Fixes: ef557180 ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by:
Hillf Danton <hdanton@sina.com> [dj: massage changelog] Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Tejun Heo <tj@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 81ee85d0 upstream. Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Fixes: 556ab45f ("ioat2: catch and recover from broken vtd configurations v6") Signed-off-by:
-
