- 28 Aug, 2017 1 commit
-
-
Mathias Krause authored
The memory reserved to dump the xfrm offload state includes padding bytes of struct xfrm_user_offload added by the compiler for alignment. Add an explicit memset(0) before filling the buffer to avoid the heap info leak. Cc: Steffen Klassert <steffen.klassert@secunet.com> Fixes: d77e38e6 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
- 25 Aug, 2017 2 commits
-
-
Steffen Klassert authored
We use skb_availroom to calculate the skb tailroom for the ESP trailer. skb_availroom calculates the tailroom and subtracts this value by reserved_tailroom. However reserved_tailroom is a union with the skb mark. This means that we subtract the tailroom by the skb mark if set. Fix this by using skb_tailroom instead. Fixes: cac2661c ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Steffen Klassert authored
We allocate the page fragment for the ESP trailer inside a spinlock, but consume it outside of the lock. This is racy as some other cou could get the same page fragment then. Fix this by consuming the page fragment inside the lock too. Fixes: cac2661c ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
- 24 Aug, 2017 10 commits
-
-
Lorenzo Colitti authored
While removing dst_entry garbage collection, commit 52df157f ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") changed xfrm_resolve_and_create_bundle so it returns an xdst with a refcount of 1 instead of 0. However, it did not delete the dst_hold performed by xfrm_lookup when a per-socket policy is in use. This means that when a socket policy is in use, dst entries returned by xfrm_lookup have a refcount of 2, and are not freed when no longer in use. Cc: Wei Wang <weiwan@google.com> Fixes: 52df157f ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") Tested: https://android-review.googlesource.com/417481 Tested: https://android-review.googlesource.com/418659 Tested: https://android-review.googlesource.com/424463 Tested: https://android-review.googlesource.com/452776 passes on net-next Signed-off-by:
Lorenzo Colitti <lorenzo@google.com> Acked-by:
Wei Wang <weiwan@google.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Eric Dumazet authored
Two kfree_skb() should be consume_skb(), to be friend with drop monitor (perf record ... -e skb:kfree_skb) Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: fix SR-IOV deadlock and representor bugs This series tackles the bug I've already tried to fix in commit 6d48ceb2 ("nfp: allocate a private workqueue for driver work"). I created a separate workqueue to avoid possible deadlock, and the lockdep error disappeared, coincidentally. The way workqueues are operating, separate workqueue doesn't necessarily mean separate thread of execution. Luckily we can safely forego the lock. Second fix changes the order in which vNIC netdevs and representors are created/destroyed. The fix is kept small and should be sufficient for net because of how flower uses representors, a more thorough fix will be targeted at net-next. Third fix avoids leaking mapped frame buffers if FW sent a frame with unknown portid. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
When driver receives a muxed frame, but it can't find the representor netdev it is destined to it will try to "drop" that frame, i.e. reuse the buffer. The issue is that the replacement buffer has already been allocated at this point, and reusing the buffer from received frame will leak it. Change the code to put the new buffer on the ring earlier and not reuse the old buffer (make the buffer parameter to nfp_net_rx_drop() a NULL). Fixes: 91bf82ca ("nfp: add support for tx/rx with metadata portid") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
App start/stop callbacks can perform application initialization. Unfortunately, flower app started using them for creating and destroying representors. This can lead to a situation where lower vNIC netdev is destroyed while representors still try to pass traffic. This will most likely lead to a NULL-dereference on the lower netdev TX path. Move the start/stop callbacks, so that representors are created/ destroyed when vNICs are fully initialized. Fixes: 5de73ee4 ("nfp: general representor implementation") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Enabling SR-IOV VFs will cause the PCI subsystem to schedule a work and flush its workqueue. Since the nfp driver schedules its own work we can't enable VFs while holding driver load. Commit 6d48ceb2 ("nfp: allocate a private workqueue for driver work") tried to avoid this deadlock by creating a separate workqueue. Unfortunately, due to the architecture of workqueue subsystem this does not guarantee a separate thread of execution. Luckily we can simply take pci_enable_sriov() from under the driver lock. Take pci_disable_sriov() from under the lock too for symmetry. Fixes: 6d48ceb2 ("nfp: allocate a private workqueue for driver work") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: Fix tag_ksz.c This implements David's suggestion of providing low-level functions to control whether skb_pad() and skb_put_padto() should be freeing the passed skb. We make use of it to fix a double free in net/dsa/tag_ksz.c that would occur if we kept using skb_put_padto() in both places. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The first call of skb_put_padto() will free up the SKB on error, but we return NULL which tells dsa_slave_xmit() that the original SKB should be freed so this would lead to a double free here. The second skb_put_padto() already frees the passed sk_buff reference upon error, so calling kfree_skb() on it again is not necessary. Detected by CoverityScan, CID#1416687 ("USE_AFTER_FREE") Fixes: e71cb9e0 ("net: dsa: ksz: fix skb freeing") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Rename skb_pad() into __skb_pad() and make it take a third argument: free_on_error which controls whether kfree_skb() should be called or not, skb_pad() directly makes use of it and passes true to preserve its existing behavior. Do exactly the same thing with __skb_put_padto() and skb_put_padto(). Suggested-by:
David Miller <davem@davemloft.net> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephan Gatzka authored
When using MII/GMII/SGMII in the Altera SoC, the phy needs to be wired through the FPGA. To ensure correct behavior, the appropriate bit in the System Manager FPGA Interface Group register needs to be set. Signed-off-by:
Stephan Gatzka <stephan.gatzka@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 22 Aug, 2017 17 commits
-
-
Florian Fainelli authored
Junote Cai reported that he was not able to get a DSA setup involving the Freescale DPAA/FMAN driver to work and narrowed it down to of_find_net_device_by_node(). This function requires the network device's device reference to be correctly set which is the case here, though we have lost any device_node association there. The problem is that dpaa_eth_add_device() allocates a "dpaa-ethernet" platform device, and later on dpaa_eth_probe() is called but SET_NETDEV_DEV() won't be propagating &pdev->dev.of_node properly. Fix this by inherenting both the parent device and the of_node when dpaa_eth_add_device() creates the platform device. Fixes: 39339616 ("fsl/fman: Add FMan MAC driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Currently, iproute2's BPF ELF loader works fine with array of maps when retrieving the fd from a pinned node and doing a selfcheck against the provided map attributes from the object file, but we fail to do the same for hash of maps and thus refuse to get the map from pinned node. Reason is that when allocating hash of maps, fd_htab_map_alloc() will set the value size to sizeof(void *), and any user space map creation requests are forced to set 4 bytes as value size. Thus, selfcheck will complain about exposed 8 bytes on 64 bit archs vs. 4 bytes from object file as value size. Contract is that fdinfo or BPF_MAP_GET_FD_BY_ID returns the value size used to create the map. Fix it by handling it the same way as we do for array of maps, which means that we leave value size at 4 bytes and in the allocation phase round up value size to 8 bytes. alloc_htab_elem() needs an adjustment in order to copy rounded up 8 bytes due to bpf_fd_htab_map_update_elem() calling into htab_map_update_elem() with the pointer of the map pointer as value. Unlike array of maps where we just xchg(), we're using the generic htab_map_update_elem() callback also used from helper calls, which published the key/value already on return, so we need to ensure to memcpy() the right size. Fixes: bcc6b1b7 ("bpf: Add hash of maps support") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Priit reported that stmmac was crashing with the trace below. This is because phy_attached_print() is called too early right after the PHY device has been found, but before it has a driver attached, since that is only done in phy_probe() which occurs later. Fix this by dealing with a possibly NULL phydev->drv point since that can happen here, but could also happen if we voluntarily did an unbind of the PHY device with the PHY driver. sun7i-dwmac 1c50000.ethernet: PTP uses main clock sun7i-dwmac 1c50000.ethernet: no reset control found sun7i-dwmac 1c50000.ethernet: no regulator found sun7i-dwmac 1c50000.ethernet: Ring mode enabled sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported sun7i-dwmac 1c50000.ethernet: Normal descriptors libphy: stmmac: probed Unable to handle kernel NULL pointer dereference at virtual address 00000048 pgd = c0004000 [00000048] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc6-00318-g0065bd7fa384 #1 Hardware name: Allwinner sun7i (A20) Family task: ee868000 task.stack: ee85c000 PC is at phy_attached_print+0x1c/0x8c LR is at stmmac_mdio_register+0x12c/0x200 pc : [<c04510ac>] lr : [<c045e6b4>] psr: 60000013 sp : ee85ddc8 ip : 00000000 fp : c07dfb5c r10: ee981210 r9 : 00000001 r8 : eea73000 r7 : eeaa6dd0 r6 : eeb49800 r5 : 00000000 r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eeb49800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4000406a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xee85c210) Stack: (0xee85ddc8 to 0xee85e000) ddc0: 00000000 00000002 eeb49400 eea72000 00000000 eeb49400 dde0: c045e6b4 00000000 ffffffff eeab0810 00000000 c08051f8 ee9292c0 c016d480 de00: eea725c0 eea73000 eea72000 00000001 eea726c0 c0457d0c 00000040 00000020 de20: 00000000 c045b850 00000001 00000000 ee981200 eeab0810 eeaa6ed0 ee981210 de40: 00000000 c094a4a0 00000000 c0465180 eeaa7550 f08d0000 c9ffb90c 00000032 de60: fffffffa 00000032 ee981210 ffffffed c0a46620 fffffdfb c0a46620 c03f7be8 de80: ee981210 c0a9a388 00000000 00000000 c0a46620 c03f63e0 ee981210 c0a46620 dea0: ee981244 00000000 00000007 000000c6 c094a4a0 c03f6534 00000000 c0a46620 dec0: c03f6490 c03f49ec ee828a58 ee9217b4 c0a46620 eeaa4b00 c0a43230 c03f59fc dee0: c08051f8 c094a49c c0a46620 c0a46620 00000000 c091c668 c093783c c03f6dfc df00: ffffe000 00000000 c091c668 c010177c eefe0938 eefe0935 c085e200 000000c6 df20: 00000005 c0136bc8 60000013 c080b3a4 00000006 00000006 c07ce7b4 00000000 df40: c07d7ddc c07cef28 eefe0938 eefe093e c0a0b2f0 c0a641c0 c0a641c0 c0a641c0 df60: c0937834 00000007 000000c6 c094a4a0 00000000 c0900d88 00000006 00000006 df80: 00000000 c09005a8 00000000 c060ecf4 00000000 00000000 00000000 00000000 dfa0: 00000000 c060ecfc 00000000 c0107738 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffdeffff ffffffff [<c04510ac>] (phy_attached_print) from [<c045e6b4>] (stmmac_mdio_register+0x12c/0x200) [<c045e6b4>] (stmmac_mdio_register) from [<c045b850>] (stmmac_dvr_probe+0x850/0x96c) [<c045b850>] (stmmac_dvr_probe) from [<c0465180>] (sun7i_gmac_probe+0x120/0x180) [<c0465180>] (sun7i_gmac_probe) from [<c03f7be8>] (platform_drv_probe+0x50/0xac) [<c03f7be8>] (platform_drv_probe) from [<c03f63e0>] (driver_probe_device+0x234/0x2e4) [<c03f63e0>] (driver_probe_device) from [<c03f6534>] (__driver_attach+0xa4/0xa8) [<c03f6534>] (__driver_attach) from [<c03f49ec>] (bus_for_each_dev+0x4c/0x9c) [<c03f49ec>] (bus_for_each_dev) from [<c03f59fc>] (bus_add_driver+0x190/0x214) [<c03f59fc>] (bus_add_driver) from [<c03f6dfc>] (driver_register+0x78/0xf4) [<c03f6dfc>] (driver_register) from [<c010177c>] (do_one_initcall+0x44/0x168) [<c010177c>] (do_one_initcall) from [<c0900d88>] (kernel_init_freeable+0x144/0x1d0) [<c0900d88>] (kernel_init_freeable) from [<c060ecfc>] (kernel_init+0x8/0x110) [<c060ecfc>] (kernel_init) from [<c0107738>] (ret_from_fork+0x14/0x3c) Code: e59021c8 e59d401c e590302c e3540000 (e5922048) ---[ end trace 39ae87c7923562d0 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Tested-By:
Priit Laes <plaes@plaes.org> Fixes: fbca1647 ("net: stmmac: Use the right logging function in stmmac_mdio_register") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== net: sched: couple of chain fixes Jiri Pirko (2): net: sched: fix use after free when tcf_chain_destroy is called multiple times net: sched: don't do tcf_chain_flush from tcf_chain_destroy ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
tcf_chain_flush needs to be called with RTNL. However, on free_tcf-> tcf_action_goto_chain_fini-> tcf_chain_put-> tcf_chain_destroy-> tcf_chain_flush callpath, it is called without RTNL. This issue was notified by following warning: [ 155.599052] WARNING: suspicious RCU usage [ 155.603165] 4.13.0-rc5jiri+ #54 Not tainted [ 155.607456] ----------------------------- [ 155.611561] net/sched/cls_api.c:195 suspicious rcu_dereference_protected() usage! Since on this callpath, the chain is guaranteed to be already empty by check in tcf_chain_put, move the tcf_chain_flush call out and call it only where it is needed - into tcf_block_put. Fixes: db50514f ("net: sched: add termination action to allow goto chain") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
The goto_chain termination action takes a reference of a chain. In that case, there is an issue when block_put is called tcf_chain_destroy directly. The follo-up call of tcf_chain_put by goto_chain action free works with memory that is already freed. This was caught by kasan: [ 220.337908] BUG: KASAN: use-after-free in tcf_chain_put+0x1b/0x50 [ 220.344103] Read of size 4 at addr ffff88036d1f2cec by task systemd-journal/261 [ 220.353047] CPU: 0 PID: 261 Comm: systemd-journal Not tainted 4.13.0-rc5jiri+ #54 [ 220.360661] Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox x86 mezzanine board, BIOS 4.6.5 08/02/2016 [ 220.371784] Call Trace: [ 220.374290] <IRQ> [ 220.376355] dump_stack+0xd5/0x150 [ 220.391485] print_address_description+0x86/0x410 [ 220.396308] kasan_report+0x181/0x4c0 [ 220.415211] tcf_chain_put+0x1b/0x50 [ 220.418949] free_tcf+0x95/0xc0 So allow tcf_chain_destroy to be called multiple times, free only in case the reference count drops to 0. Fixes: 5bc17018 ("net: sched: introduce multichain support for filters") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When peeking, if a bad csum is discovered, the skb is unlinked from the queue with __sk_queue_drop_skb and the peek operation restarted. __sk_queue_drop_skb only drops packets that match the queue head. This fails if the skb was found after the head, using SO_PEEK_OFF socket option. This causes an infinite loop. We MUST drop this problematic skb, and we can simply check if skb was already removed by another thread, by looking at skb->next : This pointer is set to NULL by the __skb_unlink() operation, that might have happened only under the spinlock protection. Many thanks to syzkaller team (and particularly Dmitry Vyukov who provided us nice C reproducers exhibiting the lockup) and Willem de Bruijn who provided first version for this patch and a test program. Fixes: 627d2d6b ("udp: enable MSG_PEEK at non-zero offset") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
This helps tools such as wpa_supplicant can start even if the macsec module isn't loaded yet. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Parthasarathy Bhuvaragan says: ==================== tipc: topology server fixes The following commits fixes two race conditions causing general protection faults. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ying Xue authored
No matter whether a request is inserted into workqueue as a work item to cancel a subscription or to delete a subscription's subscriber asynchronously, the work items may be executed in different workers. As a result, it doesn't mean that one request which is raised prior to another request is definitely handled before the latter. By contrast, if the latter request is executed before the former request, below error may happen: [ 656.183644] BUG: spinlock bad magic on CPU#0, kworker/u8:0/12117 [ 656.184487] general protection fault: 0000 [#1] SMP [ 656.185160] Modules linked in: tipc ip6_udp_tunnel udp_tunnel 9pnet_virtio 9p 9pnet virtio_net virtio_pci virtio_ring virtio [last unloaded: ip6_udp_tunnel] [ 656.187003] CPU: 0 PID: 12117 Comm: kworker/u8:0 Not tainted 4.11.0-rc7+ #6 [ 656.187920] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 656.188690] Workqueue: tipc_rcv tipc_recv_work [tipc] [ 656.189371] task: ffff88003f5cec40 task.stack: ffffc90004448000 [ 656.190157] RIP: 0010:spin_bug+0xdd/0xf0 [ 656.190678] RSP: 0018:ffffc9000444bcb8 EFLAGS: 00010202 [ 656.191375] RAX: 0000000000000034 RBX: ffff88003f8d1388 RCX: 0000000000000000 [ 656.192321] RDX: ffff88003ba13708 RSI: ffff88003ba0cd08 RDI: ffff88003ba0cd08 [ 656.193265] RBP: ffffc9000444bcd0 R08: 0000000000000030 R09: 000000006b6b6b6b [ 656.194208] R10: ffff8800bde3e000 R11: 00000000000001b4 R12: 6b6b6b6b6b6b6b6b [ 656.195157] R13: ffffffff81a3ca64 R14: ffff88003f8d1388 R15: ffff88003f8d13a0 [ 656.196101] FS: 0000000000000000(0000) GS:ffff88003ba00000(0000) knlGS:0000000000000000 [ 656.197172] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 656.197935] CR2: 00007f0b3d2e6000 CR3: 000000003ef9e000 CR4: 00000000000006f0 [ 656.198873] Call Trace: [ 656.199210] do_raw_spin_lock+0x66/0xa0 [ 656.199735] _raw_spin_lock_bh+0x19/0x20 [ 656.200258] tipc_subscrb_subscrp_delete+0x28/0xf0 [tipc] [ 656.200990] tipc_subscrb_rcv_cb+0x45/0x260 [tipc] [ 656.201632] tipc_receive_from_sock+0xaf/0x100 [tipc] [ 656.202299] tipc_recv_work+0x2b/0x60 [tipc] [ 656.202872] process_one_work+0x157/0x420 [ 656.203404] worker_thread+0x69/0x4c0 [ 656.203898] kthread+0x138/0x170 [ 656.204328] ? process_one_work+0x420/0x420 [ 656.204889] ? kthread_create_on_node+0x40/0x40 [ 656.205527] ret_from_fork+0x29/0x40 [ 656.206012] Code: 48 8b 0c 25 00 c5 00 00 48 c7 c7 f0 24 a3 81 48 81 c1 f0 05 00 00 65 8b 15 61 ef f5 7e e8 9a 4c 09 00 4d 85 e4 44 8b 4b 08 74 92 <45> 8b 84 24 40 04 00 00 49 8d 8c 24 f0 05 00 00 eb 8d 90 0f 1f [ 656.208504] RIP: spin_bug+0xdd/0xf0 RSP: ffffc9000444bcb8 [ 656.209798] ---[ end trace e2a800e6eb0770be ]--- In above scenario, the request of deleting subscriber was performed earlier than the request of canceling a subscription although the latter was issued before the former, which means tipc_subscrb_delete() was called before tipc_subscrp_cancel(). As a result, when tipc_subscrb_subscrp_delete() called by tipc_subscrp_cancel() was executed to cancel a subscription, the subscription's subscriber refcnt had been decreased to 1. After tipc_subscrp_delete() where the subscriber was freed because its refcnt was decremented to zero, but the subscriber's lock had to be released, as a consequence, panic happened. By contrast, if we increase subscriber's refcnt before tipc_subscrb_subscrp_delete() is called in tipc_subscrp_cancel(), the panic issue can be avoided. Fixes: d094c4d5 ("tipc: add subscription refcount to avoid invalid delete") Reported-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Parthasarathy Bhuvaragan authored
In commit, 139bb36f ("tipc: advance the time of deleting subscription from subscriber->subscrp_list"), we delete the subscription from the subscribers list and from nametable unconditionally. This leads to the following bug if the timer running tipc_subscrp_timeout() in another CPU accesses the subscription list after the subscription delete request. [39.570] general protection fault: 0000 [#1] SMP :: [39.574] task: ffffffff81c10540 task.stack: ffffffff81c00000 [39.575] RIP: 0010:tipc_subscrp_timeout+0x32/0x80 [tipc] [39.576] RSP: 0018:ffff88003ba03e90 EFLAGS: 00010282 [39.576] RAX: dead000000000200 RBX: ffff88003f0f3600 RCX: 0000000000000101 [39.577] RDX: dead000000000100 RSI: 0000000000000201 RDI: ffff88003f0d7948 [39.578] RBP: ffff88003ba03ea0 R08: 0000000000000001 R09: ffff88003ba03ef8 [39.579] R10: 000000000000014f R11: 0000000000000000 R12: ffff88003f0d7948 [39.580] R13: ffff88003f0f3618 R14: ffffffffa006c250 R15: ffff88003f0f3600 [39.581] FS: 0000000000000000(0000) GS:ffff88003ba00000(0000) knlGS:0000000000000000 [39.582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39.583] CR2: 00007f831c6e0714 CR3: 000000003d3b0000 CR4: 00000000000006f0 [39.584] Call Trace: [39.584] <IRQ> [39.585] call_timer_fn+0x3d/0x180 [39.585] ? tipc_subscrb_rcv_cb+0x260/0x260 [tipc] [39.586] run_timer_softirq+0x168/0x1f0 [39.586] ? sched_clock_cpu+0x16/0xc0 [39.587] __do_softirq+0x9b/0x2de [39.587] irq_exit+0x60/0x70 [39.588] smp_apic_timer_interrupt+0x3d/0x50 [39.588] apic_timer_interrupt+0x86/0x90 [39.589] RIP: 0010:default_idle+0x20/0xf0 [39.589] RSP: 0018:ffffffff81c03e58 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10 [39.590] RAX: 0000000000000000 RBX: ffffffff81c10540 RCX: 0000000000000000 [39.591] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [39.592] RBP: ffffffff81c03e68 R08: 0000000000000000 R09: 0000000000000000 [39.593] R10: ffffc90001cbbe00 R11: 0000000000000000 R12: 0000000000000000 [39.594] R13: ffffffff81c10540 R14: 0000000000000000 R15: 0000000000000000 [39.595] </IRQ> :: [39.603] RIP: tipc_subscrp_timeout+0x32/0x80 [tipc] RSP: ffff88003ba03e90 [39.604] ---[ end trace 79ce94b7216cb459 ]--- Fixes: 139bb36f ("tipc: advance the time of deleting subscription from subscriber->subscrp_list") Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Update the value of the mrouter flag in struct mlxsw_sp_bridge_port when it is being changed. Fixes: c57529e1 ("mlxsw: spectrum: Replace vPorts with Port-VLAN") Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Jeffery authored
netif_napi_del() should be paired with netif_napi_add(), however no such call takes place in ftgmac100_probe(). This triggers a NULL pointer dereference if e.g. no PHY is found by the MDIO probe: [ 2.770000] libphy: Fixed MDIO Bus: probed [ 2.770000] ftgmac100 1e660000.ethernet: Generated random MAC address 66:58:c0:5a:50:b8 [ 2.790000] libphy: ftgmac100_mdio: probed [ 2.790000] ftgmac100 1e660000.ethernet (unnamed net_device) (uninitialized): eth%d: no PHY found [ 2.790000] ftgmac100 1e660000.ethernet: MII Probe failed! [ 2.810000] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 2.810000] pgd = 80004000 [ 2.810000] [00000004] *pgd=00000000 [ 2.810000] Internal error: Oops: 805 [#1] ARM [ 2.810000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.10.17-1a4df30c39cf5ee0e3d2528c409787ccbb4a672a #1 [ 2.810000] Hardware name: ASpeed SoC [ 2.810000] task: 9e421b60 task.stack: 9e4a0000 [ 2.810000] PC is at netif_napi_del+0x74/0xa4 [ 2.810000] LR is at ftgmac100_probe+0x290/0x674 [ 2.810000] pc : [<80331004>] lr : [<80292b30>] psr: 60000013 [ 2.810000] sp : 9e4a1d70 ip : 9e4a1d88 fp : 9e4a1d84 [ 2.810000] r10: 9e565000 r9 : ffffffed r8 : 00000007 [ 2.810000] r7 : 9e565480 r6 : 9ec072c0 r5 : 00000000 r4 : 9e5654d8 [ 2.810000] r3 : 9e565530 r2 : 00000000 r1 : 00000000 r0 : 9e5654d8 [ 2.810000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 2.810000] Control: 00c5387d Table: 80004008 DAC: 00000055 [ 2.810000] Process swapper (pid: 1, stack limit = 0x9e4a0188) [ 2.810000] Stack: (0x9e4a1d70 to 0x9e4a2000) [ 2.810000] 1d60: 9e565000 9e549e10 9e4a1dcc 9e4a1d88 [ 2.810000] 1d80: 80292b30 80330f9c ffffffff 9e4a1d98 80146058 9ec072c0 00009e10 00000000 [ 2.810000] 1da0: 9e549e18 9e549e10 ffffffed 805f81f4 fffffdfb 00000000 00000000 00000000 [ 2.810000] 1dc0: 9e4a1dec 9e4a1dd0 80243df8 802928ac 9e549e10 8062cbd8 8062cbe0 805f81f4 [ 2.810000] 1de0: 9e4a1e24 9e4a1df0 80242178 80243da4 803001d0 802ffa60 9e4a1e24 9e549e10 [ 2.810000] 1e00: 9e549e44 805f81f4 00000000 00000000 805b8840 8058a6b0 9e4a1e44 9e4a1e28 [ 2.810000] 1e20: 80242434 80241f04 00000000 805f81f4 80242344 00000000 9e4a1e6c 9e4a1e48 [ 2.810000] 1e40: 80240148 80242350 9e425bac 9e4fdc90 9e790e94 805f81f4 9e790e60 805f5640 [ 2.810000] 1e60: 9e4a1e7c 9e4a1e70 802425dc 802400d8 9e4a1ea4 9e4a1e80 80240ba8 802425c0 [ 2.810000] 1e80: 8050b6ac 9e4a1e90 805f81f4 ffffe000 805b8838 80616720 9e4a1ebc 9e4a1ea8 [ 2.810000] 1ea0: 80243068 80240a68 805ab24c ffffe000 9e4a1ecc 9e4a1ec0 80244a38 80242fec [ 2.810000] 1ec0: 9e4a1edc 9e4a1ed0 805ab264 80244a04 9e4a1f4c 9e4a1ee0 8058ae70 805ab258 [ 2.810000] 1ee0: 80032c68 801e3fd8 8052f800 8041af2c 9e4a1f4c 9e4a1f00 80032f90 8058a6bc [ 2.810000] 1f00: 9e4a1f2c 9e4a1f10 00000006 00000006 00000000 8052f220 805112f0 00000000 [ 2.810000] 1f20: 9e4a1f4c 00000006 80616720 805cf400 80616720 805b8838 80616720 00000057 [ 2.810000] 1f40: 9e4a1f94 9e4a1f50 8058b040 8058add0 00000006 00000006 00000000 8058a6b0 [ 2.810000] 1f60: 3940bf3d 00000007 f115c2e8 00000000 803fd158 00000000 00000000 00000000 [ 2.810000] 1f80: 00000000 00000000 9e4a1fac 9e4a1f98 803fd170 8058af38 00000000 803fd158 [ 2.810000] 1fa0: 00000000 9e4a1fb0 8000a5e8 803fd164 00000000 00000000 00000000 00000000 [ 2.810000] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.810000] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 d11dcae8 af8ddec5 [ 2.810000] [<80331004>] (netif_napi_del) from [<80292b30>] (ftgmac100_probe+0x290/0x674) [ 2.810000] [<80292b30>] (ftgmac100_probe) from [<80243df8>] (platform_drv_probe+0x60/0xc0) [ 2.810000] [<80243df8>] (platform_drv_probe) from [<80242178>] (driver_probe_device+0x280/0x44c) [ 2.810000] [<80242178>] (driver_probe_device) from [<80242434>] (__driver_attach+0xf0/0x104) [ 2.810000] [<80242434>] (__driver_attach) from [<80240148>] (bus_for_each_dev+0x7c/0xb0) [ 2.810000] [<80240148>] (bus_for_each_dev) from [<802425dc>] (driver_attach+0x28/0x30) [ 2.810000] [<802425dc>] (driver_attach) from [<80240ba8>] (bus_add_driver+0x14c/0x268) [ 2.810000] [<80240ba8>] (bus_add_driver) from [<80243068>] (driver_register+0x88/0x104) [ 2.810000] [<80243068>] (driver_register) from [<80244a38>] (__platform_driver_register+0x40/0x54) [ 2.810000] [<80244a38>] (__platform_driver_register) from [<805ab264>] (ftgmac100_driver_init+0x18/0x20) [ 2.810000] [<805ab264>] (ftgmac100_driver_init) from [<8058ae70>] (do_one_initcall+0xac/0x168) [ 2.810000] [<8058ae70>] (do_one_initcall) from [<8058b040>] (kernel_init_freeable+0x114/0x1cc) [ 2.810000] [<8058b040>] (kernel_init_freeable) from [<803fd170>] (kernel_init+0x18/0x104) [ 2.810000] [<803fd170>] (kernel_init) from [<8000a5e8>] (ret_from_fork+0x14/0x2c) [ 2.810000] Code: e594205c e5941058 e2843058 e3a05000 (e5812004) [ 3.210000] ---[ end trace f32811052fd3860c ]--- Signed-off-by:
Andrew Jeffery <andrew@aj.id.au> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
skb_put_padto() will free the sk_buff passed as reference in case of errors, but we still need to check its return value and decide what to do. Detected by CoverityScan, CID#1416688 ("CHECKED_RETURN") Fixes: ee1c2797 ("net/hsr: Added support for HSR v1") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Wang authored
We currently keep rt->rt6i_node pointing to the fib6_node for the route. And some functions make use of this pointer to dereference the fib6_node from rt structure, e.g. rt6_check(). However, as there is neither refcount nor rcu taken when dereferencing rt->rt6i_node, it could potentially cause crashes as rt->rt6i_node could be set to NULL by other CPUs when doing a route deletion. This patch introduces an rcu grace period before freeing fib6_node and makes sure the functions that dereference it takes rcu_read_lock(). Note: there is no "Fixes" tag because this bug was there in a very early stage. Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2017-08-21 1) Fix memleaks when ESP takes an error path. 2) Fix null pointer dereference when creating a sub policy that matches the same outer flow as main policy does. From Koichiro Den. 3) Fix possible out-of-bound access in xfrm_migrate. This patch should go to the stable trees too. From Vladis Dronov. 4) ESP can return positive and negative error values, so treat both cases as an error. Please pull or let me know if there are problems. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Brivio authored
A packet length of exactly IPV6_MAXPLEN is allowed, we should refuse parsing options only if the size is 64KiB or more. While at it, remove one extra variable and one assignment which were also introduced by the commit that introduced the size check. Checking the sum 'offset + len' and only later adding 'len' to 'offset' doesn't provide any advantage over directly summing to 'offset' and checking it. Fixes: 6399f1fa ("ipv6: avoid overflow of offset in ip6_find_1stfragopt") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 21 Aug, 2017 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "Just a couple small fixes, two of which have to do with gcc-7: 1) Don't clobber kernel fixed registers in __multi4 libgcc helper. 2) Fix a new uninitialized variable warning on sparc32 with gcc-7, from Thomas Petazzoni. 3) Adjust pmd_t initializer on sparc32 to make gcc happy. 4) If ATU isn't available, don't bark in the logs. From Tushar Dave" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: kernel/pcic: silence gcc 7.x warning in pcibios_fixup_bus() sparc64: remove unnecessary log message sparc64: Don't clibber fixed registers in __multi4. mm: add pmd_t initializer __pmd() to work around a GCC bug.
-
Thomas Petazzoni authored
When building the kernel for Sparc using gcc 7.x, the build fails with: arch/sparc/kernel/pcic.c: In function ‘pcibios_fixup_bus’: arch/sparc/kernel/pcic.c:647:8: error: ‘cmd’ may be used uninitialized in this function [-Werror=maybe-uninitialized] cmd |= PCI_COMMAND_IO; ^~ The simplified code looks like this: unsigned int cmd; [...] pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd); [...] cmd |= PCI_COMMAND_IO; I.e, the code assumes that pcic_read_config() will always initialize cmd. But it's not the case. Looking at pcic_read_config(), if bus->number is != 0 or if the size is not one of 1, 2 or 4, *val will not be initialized. As a simple fix, we initialize cmd to zero at the beginning of pcibios_fixup_bus. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - PAE40 related updates - SLC errata for region ops - intc line masking by default * tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: Mask individual IRQ lines during core INTC init ARCv2: PAE40: set MSB even if !CONFIG_ARC_HAS_PAE40 but PAE exists in SoC ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses ARC: dma: implement dma_unmap_page and sg variant ARCv2: SLC: Make sure busy bit is set properly for region ops ARC: [plat-sim] Include this platform unconditionally ARC: [plat-axs10x]: prepare dts files for enabling PAE40 on axs103 ARC: defconfig: Cleanup from old Kconfig options
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC fix from Alexandre Belloni: "Fix regmap configuration for ds1307" * tag 'rtc-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: ds1307: fix regmap config
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix IGMP handling wrt VRF, from David Ahern. 2) Fix timer access to freed object in dccp, from Eric Dumazet. 3) Use kmalloc_array() in ptr_ring to avoid overflow cases which are triggerable by userspace. Also from Eric Dumazet. 4) Fix infinite loop in unmapping cleanup of nfp driver, from Colin Ian King. 5) Correct datagram peek handling of empty SKBs, from Matthew Dawson. 6) Fix use after free in TIPC, from Eric Dumazet. 7) When replacing a route in ipv6 we need to reset the round robin pointer, from Wei Wang. 8) Fix bug in pci_find_pcie_root_port() which was unearthed by the relaxed ordering changes, from Thierry Redding. I made sure to get an explicit ACK from Bjorn this time around :-) * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) ipv6: repair fib6 tree in failure case net_sched: fix order of queue length updates in qdisc_replace() tools lib bpf: improve warning switchdev: documentation: minor typo fixes bpf, doc: also add s390x as arch to sysctl description net: sched: fix NULL pointer dereference when action calls some targets rxrpc: Fix oops when discarding a preallocated service call irda: do not leak initialized list.dev to userspace net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabled PCI: Allow PCI express root ports to find themselves tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set ipv6: reset fn->rr_ptr when replacing route sctp: fully initialize the IPv6 address in sctp_v6_to_addr() tipc: fix use-after-free tun: handle register_netdevice() failures properly datagram: When peeking datagrams with offset < 0 don't skip empty skbs bpf, doc: improve sysctl knob description netxen: fix incorrect loop counter decrement nfp: fix infinite loop on umapping cleanup ...
-
Oleg Nesterov authored
This was reported many times, and this was even mentioned in commit 52ee2dfd ("pids: refactor vnr/nr_ns helpers to make them safe") but somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is not safe because task->group_leader points to nowhere after the exiting task passes exit_notify(), rcu_read_lock() can not help. We really need to change __unhash_process() to nullify group_leader, parent, and real_parent, but this needs some cleanups. Until then we can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and fix the problem. Reported-by:
Troy Kensinger <tkensinger@google.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Heiner Kallweit authored
Current max_register setting breaks reading nvram on certain chips and also reading the standard registers on RX8130 where register map starts at 0x10. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Fixes: 11e5890b "rtc: ds1307: convert driver to regmap" Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Wei Wang authored
In fib6_add(), it is possible that fib6_add_1() picks an intermediate node and sets the node's fn->leaf to NULL in order to add this new route. However, if fib6_add_rt2node() fails to add the new route for some reason, fn->leaf will be left as NULL and could potentially cause crash when fn->leaf is accessed in fib6_locate(). This patch makes sure fib6_repair_tree() is called to properly repair fn->leaf in the above failure case. Here is the syzkaller reported general protection fault in fib6_locate: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 40937 Comm: syz-executor3 Not tainted Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d7d64100 ti: ffff8801d01a0000 task.ti: ffff8801d01a0000 RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] __ipv6_prefix_equal64_half include/net/ipv6.h:475 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] ipv6_prefix_equal include/net/ipv6.h:492 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate_1 net/ipv6/ip6_fib.c:1210 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate+0x281/0x3c0 net/ipv6/ip6_fib.c:1233 RSP: 0018:ffff8801d01a36a8 EFLAGS: 00010202 RAX: 0000000000000020 RBX: ffff8801bc790e00 RCX: ffffc90002983000 RDX: 0000000000001219 RSI: ffff8801d01a37a0 RDI: 0000000000000100 RBP: ffff8801d01a36f0 R08: 00000000000000ff R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001 R13: dffffc0000000000 R14: ffff8801d01a37a0 R15: 0000000000000000 FS: 00007f6afd68c700(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004c6340 CR3: 00000000ba41f000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8801d01a37a8 ffff8801d01a3780 ffffed003a0346f5 0000000c82a23ea0 ffff8800b7bd7700 ffff8801d01a3780 ffff8800b6a1c940 ffffffff82a23ea0 ffff8801d01a3920 ffff8801d01a3748 ffffffff82a223d6 ffff8801d7d64988 Call Trace: [<ffffffff82a223d6>] ip6_route_del+0x106/0x570 net/ipv6/route.c:2109 [<ffffffff82a23f9d>] inet6_rtm_delroute+0xfd/0x100 net/ipv6/route.c:3075 [<ffffffff82621359>] rtnetlink_rcv_msg+0x549/0x7a0 net/core/rtnetlink.c:3450 [<ffffffff8274c1d1>] netlink_rcv_skb+0x141/0x370 net/netlink/af_netlink.c:2281 [<ffffffff82613ddf>] rtnetlink_rcv+0x2f/0x40 net/core/rtnetlink.c:3456 [<ffffffff8274ad38>] netlink_unicast_kernel net/netlink/af_netlink.c:1206 [inline] [<ffffffff8274ad38>] netlink_unicast+0x518/0x750 net/netlink/af_netlink.c:1232 [<ffffffff8274b83e>] netlink_sendmsg+0x8ce/0xc30 net/netlink/af_netlink.c:1778 [<ffffffff82564aff>] sock_sendmsg_nosec net/socket.c:609 [inline] [<ffffffff82564aff>] sock_sendmsg+0xcf/0x110 net/socket.c:619 [<ffffffff82564d62>] sock_write_iter+0x222/0x3a0 net/socket.c:834 [<ffffffff8178523d>] new_sync_write+0x1dd/0x2b0 fs/read_write.c:478 [<ffffffff817853f4>] __vfs_write+0xe4/0x110 fs/read_write.c:491 [<ffffffff81786c38>] vfs_write+0x178/0x4b0 fs/read_write.c:538 [<ffffffff817892a9>] SYSC_write fs/read_write.c:585 [inline] [<ffffffff817892a9>] SyS_write+0xd9/0x1b0 fs/read_write.c:577 [<ffffffff82c71e32>] entry_SYSCALL_64_fastpath+0x12/0x17 Note: there is no "Fixes" tag as this seems to be a bug introduced very early. Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Konstantin Khlebnikov authored
This important to call qdisc_tree_reduce_backlog() after changing queue length. Parent qdisc should deactivate class in ->qlen_notify() called from qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero. Missed class deactivations leads to crashes/warnings at picking packets from empty qdisc and corrupting state at reactivating this class in future. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 86a7996c ("net_sched: introduce qdisc_replace() helper") Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Leblond authored
Signed-off-by:
Eric Leblond <eric@regit.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-