Patch from Ben Dooks

the calls _find_first_zero_bit_be() and _find_next_zero_bit_be()
are missing const from the pointer argument passed in, causing
several build warnings when building an ARM kernel in big-endian
mode.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: David S. Miller <davem@davemloft.net>

- Fix TSO for 5750 chips by setting tcp checksum field to 0 for TSO packets
- Add TG3_FLG2_HW_TSO flag for 5750 and newer chips that use the same TSO
  scheme
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we forward a fragmented packet, we can have ip_summed
set to CHECKSUM_HW or similar.  This is fine for local
protocol processing, but once if we are forwarding this
packet we want to reset ip_summed to CHECKSUM_NONE.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nothing in the kernel is using bcopy right know, and that is a good thing.
Why? Because a lot of the architectures implement a broken bcopy()....
the userspace standard bcopy() is basically a memmove() with a weird
parameter order, however a bunch of architectures implement a memcpy() not a
memmove().

Instead of fixing this inconsistency, I decided to remove it entirely,
explicit memcpy() and memmove() are prefered anyway (welcome to the 1990's)
and nothing in the kernel is using these functions, so this saves code size
as well for everyone.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

[ Side note: the only reason for bcopy appears to be totally ancient
  gcc versions for OSF/1, used to originally cross-compile Linux on
  alpha. Possibly some other similar cases. Time to move on ;-]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Duh. Freeing the main buffers can _cause_ the temporary
page to be created.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Ben Dooks

This patch moves all the machine/arch specific bits out of
arch/arm/kernel/debug.S and places them into the include
directories for those given architectures. The debug macros
are placed into include/asm-arm/arch-*/debug-macro.S.
The aim is to clean-up the debug.S code and make it easier to
modify a single-architecture without affecting the entire
debug.S file.
The patch also removes CONFIG_ARCH_FTVPCI, which no longer
exists anywhere else in the kernel.
All new include files have the original copyright notice
from arch/arm/kernel/debug.S.
Note, not all architectures modified here have been built
and/or tested due to lack of available machines, or
problems building for them (no defconfig available, or
problems with kernel build).

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Unfortunately, some changes to GCC prevents fiq.c expressing the
constraints for the assembly setting the FIQ register set.  Warn
people with later gcc toolchains that they can expect failure to
occur.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Anton Blanchard wrote:
>Your recent patch looks to break module kallsyms lookups....
>It looks like if CONFIG_KALLSYMS_ALL is set then we never look up module
>addresses.

Separate lookups for kernel and modules when CONFIG_KALLSYMS_ALL=y.
Signed-off-by: Keith Owens <kaos@ocs.com.au>
Acked-by: Chris Wedgwood <cw@f00f.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix warning:

In file included from include/asm/numa.h:5,
                 from arch/x86_64/kernel/setup64.c:27:
include/asm/numnodes.h:6:1: warning: "NODES_SHIFT" redefined
In file included from include/linux/mmzone.h:13,
                 from include/linux/gfp.h:4,
                 from include/linux/slab.h:15,
                 from include/linux/percpu.h:4,
                 from include/linux/sched.h:33,
                 from arch/x86_64/kernel/setup64.c:11:
include/linux/numa.h:11:1: warning: this is the location of the previous definition

in UP builds.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From Terence Ripperda <tripperda@nvidia.com>

When doing iounmap don't try to change_page_attr back the guard
page that ioremap added.

Since the last round of change_page_attr changes this would
trigger an BUG because the reference count on the changed pages
wouldn't match up.

The problem would be only visible on machines with >3GB of memory,
because only then the PCI memory hole is below end_pfn and
change_page_attr is used.

Fixed for both i386 and x86-64.

This was actually discovered&fixed by Andrea earlier, but I goofed up
while doing the last ioremap fixes merge and this change got lost.
Poor Terence had to debug it again. Sorry about that.

cc: andrea@suse.de
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Undo bogus change that was introduced with kprobes.  It's not
really needed and it breaks some user applications because
it changes the signal for int 3 from SIGTRAP to SIGSEGV.

Cc: <prasanna@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

- If dst/src are equal, memcpy can be used.
- Eliminate register writes which were unused
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Tony Luck <tony.luck@intel.com>

Patch from Christoph Hellwig to:
- irq_desc and irq_to_vector machvecs.  SN2 has it's own versions,
  but they're the same as the generic ones
- kill do do_IRQ and use __do_IRQ directly everywhere
- kill dead X86 ifdefs
- move some variable declarations around in irq.c to recuce # of ifdefs
Signed-off-by: Tony Luck <tony.luck@intel.com>

When I converted the sn2 code over to the new DMA API, I left the old routines
in place and added wrappers to call them from the generic DMA API functions.
This added an unnecessary level of obfuscation since the generic ia64 code
calls those functions when any of the old style PCI DMA API functions are
called.  This patch rectifies the problem making the code much easier to
understand and hopefully a little more efficient (though I'm sure gcc was
already inlining things pretty well, there were a bunch of unnecessary checks
that I took this opportunity to remove).  It also shrinks the size of the sn2
pci_dma.c quite a bit.
 
  pci_dma.c |  480 +++++++++++++++++++-----------------------------------------
  1 files changed, 151 insertions(+), 329 deletions(-)
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

sn2 does early initialization of the SAL so it can use it for early console
support.  Unfortunately, the loop to find the SAL entry point was buggy so
when we tried out new EFI and SAL system table layouts, the loop didn't
terminate.  Here's the fix (doh!, use two different loop counters instead of
one and just return if we find the SAL entry point).
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Ok, here you go Tony.  This one fixes the loop and also fixes drm_vm.c.  All
of the bits aside from the efi.h bit are ia64 specific (either under
arch/ia64 or __ia64__), so your tree is probably the right place for all of
it.
 
This patch adds efi_range_is_wc() to efi.h.  It's used to determine whether an
address range can be mapped with the write coalescing attribute.  It also
fixes up some ia64 specific callers to use the new routine instead of
unconditionally calling pgprot_writecombined, which can be dangerous if used
on ranges that don't support it.
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

The following patch fixes the ia64_pal_prefetch_visibility function to
take a transaction type argument for either virtual or physical memory
as specified in the System Architechture Manual page 2:358.
Signed-Off-By: Jes Sorensen <jes@trained-monkey.org>
Signed-Off-By: Tony Luck <tony.luck@intel.com>

Problem:
	There exists a case where we stop monitoring, i.e. clear
	psr.pp/dcr.pp, via IPI. This is when the stop is triggered
	by a close(), either explicit in the application or implicit
	via exit_files(). The IPI is necessary because at the time the
	thread (controlling the context) issues a close() it may not run
	on the CPU the context is bound to. Yet the call must succeed,
	hence we need to propagate the call to the right CPU.
	But what is the problem then?
	Under IPI, we invoke a perfmon routine which clear the kernel
	(live) kernel psr.pp bit and also dcr.pp. Then we return from
	the function and execute the kernel exit path which restores
	the interrupted state. Unfortunately, this restores the kernel
	psr from ipsr which now contains a stale value. Therefore
	monitoring in the kernel will be active even though we stopped it.
	You cannot modify the "global" psr in an interrupt routine because
	it will be systematically restored on the way back.
	
Solution:
	We need to patch ipsr.pp in the kernel exit path to reflect the
	kernel value of the kernel psr.pp bit. This must be done only when
	returning to kernel. 

	The proposed patch does patch ipsr.pp such that it is identical
	to psr.pp. The patch is subtle because the exit path does not have
	a lot of free registers and also because we need to schedule for
	a psr read. I had to shuffle  things around a little bit.

	The patch is important because there will be another situation where
	this problem can occur once we incorporate the support for event set
	and multiplexing. In this configuration, you may be in the middle of
	the idle loop and on a timer interrupt, you may stop monitoring.
	Slightly different condition, yet same problem with ipsr.pp vs. psr.pp.


Changelog:
	- update kernel exit path when returning to kernel to copy
	psr.pp to ipsr.pp. This is necesary to ensure that if psr.pp
	was modified during the kernel entry, the change is propagated
	the the psr.pp of the of the interrupted thread. Psr.pp can
	be modified as a consequence of an IPI under certain conditions,
	such as when a system-wide context is closed from a remote CPU.

Special thanks to David for reworking the patch to fit
into the enhanced exit path.
signed-off-by: stephane eranian <eranian@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Patch from yanmin.zhang@intel.com to fix up some corner cases
in ptrace.  Many thanks to davidm for reviewing and improving.
Signed-off-by: Tony Luck <tony.luck@intel.com>

Label is unused, and so the compiler generates a warning.
Signed-off-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Use srlz.d instead of srlz.i.  Safe because we don't care whether
the VHPT walker sees the clearing of PSR.ic (if it does, that's fine
if it doesn't, it's OK too since the kernel-text is pinned anyhow).
Good for another 11+ cycles in (normal) getpid().
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Optimize ia64_leave_syscall() a bit better for McKinley-type cores.
The patch looks big, but that's mostly due to renaming r16/r17 to r2/r3.
Good for a 13 cycle improvement.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Trivial patch: align rse_clear_invalid to 32-byte boundary.  Good for
a 9 cycle speed up.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Kernel-threads had both pUStk and pKStk set to FALSE, which was
unintentional.  I don't think the bug has shown any ill effects, but
it's clearly wrong and could come around to bite us later, so let's
fix it now.  Depends on the previous patch to clean up C usage of the
global/root-function predicates.
Signed-off-by: Tony Luck <tony.luck@intel.com>

 
The patch below is purely a cleanup but it's a prerequisite for the
next bug fix patch.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Use msleep() instead of schedule_timeout() to guarantee the task
delays as expected.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

The fixed sized array of pages that are isolated because of 2xECC
memory errors can run out.  Increasing the size of the array is a
band-aid measure, the real fix will require changes to generic code
to add some bits to page_flags so that pages with errors can be
marked so as to prevent them ever being examined.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>