Later patches remove pg_authenticate and use the name for a different purpose;
so rename it to pg_authenticate_obsolete for now.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add a set_client method to the server rpc auth_ops struct, used to set the
client (for the purposes of nfsd export authorization) using flavor-specific
information.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

find_exported_dentry() declares
	char nbuf[NAME_MAX+1];
in 2 separate places, and gcc allocates space on the stack for both
of them.  Having just one of them will suffice, if we can put put
with its scope.

Reduces function stack usage on x86-32 from 0x230 to 0x130.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch makes "find" work when traversing nohide exports on NFSv3.  The
READDIRPLUS reply needs to not return a file handle for the ".." entry when
the directory is a server side mountpoint, which would be the directory
itself, otherwise the client remembers the wrong file handle and gets
confused.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King

Patch from Nicolas Pitre

... plus Mainstone bits.

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King

Patch from George G. Davis

Use ARMv6 supersections for 16MiB static kernel direct mapped memory
regions when possible.
Based on comments received for the first version of this patch, this
version has added a comment to clarify that ARMv6 supersections are
only valid for the domain == 0 case and moved the supersection address
mask and size macros before the hardware page table definitions.

Signed-off-by: George G. Davis
Signed-off-by: Russell King

Patch from SAN People

On some ARM-based processor's (eg, Atmel's AT91RM9200) it is necessary
to signal the end-of-interrupt to the interrupt controller. This is
necessary so it can restore its internal priority levels, etc.
This patch is equivalent to the version in the current 2.4 kernels.
Patch now updated to 2.6.11

Signed-off-by: Andrew Victor
Signed-off-by: Russell King

Patch from Richard Purdie

The printks inside pxa_gpio_irq_type damage performance and are of little value in a production kernel. They should be disabled.

Signed-off-by: Richard PurdieSigned-off-by: Nicolas Pitre
Signed-off-by: Russell King

Patch from Thomas Gleixner

IRQ_DISPATCH is defined in two c files. Move it to the common header file.

Signed-off-by: Thomas Gleixner
Signed-off-by: Russell King

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from George Joseph

Modifications to autoconfig_16550a to add a testcase
to detect XScale UARTS.

Signed-off-by: George Joseph
Signed-off-by: Russell King

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Convert MMC to use bus dev_attrs instead of handling the registration
of these attributes itself.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King

Patch from Ben Dooks

Remove the include of bast-cpld.h, as it shouldn't be here as
it only defines some extra bast-specific registers, and does
not affect the configuration of the hardware dependenat items.
Ensure that the file is included in the one place it is needed
and not included.
This should discourage anyone else putting include files in
which do not affect the over-all hardware definitions.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Ben Dooks

SMDK2440 core board support

Signed-off-by: Ben Dooks

Signed-off-by: Dimitry Andric
Signed-off-by: Russell King

Patch from Ben Dooks

The patch does a number of updates, which are inter-dependant
on each other, for the s3c2440 support and some clean-ups for
all s3c24xx architecture in general.
1) Remove the s3c24xx_{fclk,hclk,pclk} variables, and pass
   these values to the clock core on initialisation. This
   removes the needless double copy, as only the timer code
   uses these directly (see point 4).
   Add an over-all xtal clock to the clock core
2) Add a sysdev driver to the clock code to ensure all the
   s3c2440 clocks are added if an s3c2440 is present.
3) Add the new IRQs to irq.c, and initialise them if the
   sysdev for the s3c2440 is present.
4) Change the timer code to request the timer clk and
   use it to get the frequency.
Depends on patch 2467/1
Thanks to Guillaume Gourat for the original patches that
prompted this re-write.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Lennert Buytenhek

This patch makes the ixp2000 port use section mappings for on-chip
registers.  This has two advantages:
1. It saves some TLB entries.
2. It enables us to work around ixp2400 erratum #66, for which the
   suggested (and only) fix involves mapping all on-chip registers
   using XCB=101 instead of XCB=000.
This patch was derived from an older patch for the same erratum
(ARM patch ID 2265/1), made by Deepak Saxena.
Note that this patch does not actually constitute a workaround for
erratum #66, it merely lays the foundation for such a workaround.

Signed-off-by: Lennert BuytenhekSigned-off-by: Deepak Saxena
Signed-off-by: Russell King

Patch from John Lenz

Adds support for the Sharp Zaurus SL-5600
Add the ability to compile any collection of poodle and
corgi support under the PXA_SHARPSL option.
arch/arm/boot/compressed/head-sharpsl.S already has code
to detect the poodle machine.

Signed-off-by: John Lenz
Signed-off-by: Russell King

Patch from Ben Dooks

Use slab allocator instead of kmalloc() to allocate the
dma buffer descriptors. This should allow the tracking
of dma descriptors, and to check if they are being freed
correctly.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Ben Dooks

Brief documentation for Documents/arm/Samsung-S3C24XX for the
HP IPAQ H1940

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Ben Dooks

Enable the watchdog at the start of the kernel uncompression
stage, so that if any errors occur before the kernel reaches
the stage where it can start running processes then the system
will be reset.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Ben Dooks

S3C2410 ADC register definitions
Patch from Shannon Holland

Signed-off-by: Shannon Holland

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Ben Dooks

21285 serial driver has a couple of sparse errors from zero
initialiser, as well as an unused label.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Cliff Brake

Changes to machine specific files and add defconfig so the CONFIG_ARCH_PXA_IDP machine will build and run.  Changes are mostly related to the 2.6 driver model.  Also removed code that is no longer required -- support for older versions of hardware, etc.

Signed-off-by: Cliff Brake
Signed-off-by: Russell King

Patch from Ben Dooks

Eliminate NULL initiated fields in the port structures
which where causing errors from sparse.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Ben Dooks

fix the following problems:
lib/iomap.c:140: warning: passing arg 1 of `__raw_readsb' makes pointer from integer without a cast
lib/iomap.c:156: warning: passing arg 1 of `__raw_writesb' makes pointer from integer without a cast
include/asm-arm/arch-ixp2000/io.h modified to have (void __iomem *) in front of the alignment code
include/asm/arch/system.h:22: warning: `cli' is deprecated (declared at include/linux/interrupt.h:65)
cli() replace by local_irq_disable
arch/arm/mach-ixp2000/ixdp2x01.c:116: warning: passing arg 1 of `ixp2000_reg_write' from incompatible pointer type
arch/arm/mach-ixp2000/ixdp2x01.c:117: warning: passing arg 1 of `ixp2000_reg_write' from incompatible pointer type
fixed definition of the cpld registers IXDP2X01_CPLD_VIRT_REG()

Signed-off-by: Ben DooksLooks okay.  Test-booted on ENP-2611, no problem.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King

Patch from Ben Dooks

Add Guillaume Gourat to list of port contributors

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Ben Dooks

Add missing S3C2410_TCFG1_MUX4_SHIFT
Patch from Guillaume Gourat

Signed-off-by: Guillaume GOURAT

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Ben Dooks

Add s3c2440 camera interface device definition
Patch from Guillaume GOURAT

Signed-off-by: Guillaume GOURAT

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Ben Dooks

Add PM hook to power board down when requested

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from John Lenz

Add the list of devices on the locomo chip, and change around
how resources and struct resource are used.  There is only one
struct resource for the entire locomo, but each driver will
call request_mem_region on the pieces it is using.
Secondly, add a few helper functions to locomo.c to control
GPIOs and DAC.

Signed-off-by: John Lenz
Signed-off-by: Russell King

Patch from Deepak Saxena

Patch 2449/1 depends on this since it removes REG_OFFSET from the
individual board implementations.

Signed-off-by: Deepak Saxena
Signed-off-by: Russell King

Patch from Deepak Saxena

Signed-off-by: Deepak Saxena
Signed-off-by: Russell King