for-3.12 branch is about to receive invasive updates which are
dependent on da0a12ca ("cgroup: fix a leak when percpu_ref_init()
fails").  Given the amount of scheduled changes, I think it'd less
painful to pull in for-3.11-fixes as preparation.  Pull in
for-3.11-fixes into for-3.12.
Signed-off-by: Tejun Heo <tj@kernel.org>

It's a rw_semaphore not a mutex.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

It uses a single label and checks the validity of each pointer. This
is err-prone, and actually we had a bug because one of the check was
insufficient.

Use multi lables as we do in other places.

v2:
- drop initializations of local variables.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

This will be used as a replacement for css_lookup().

There's a difference with cgroup id and css id. cgroup id starts with 0,
while css id starts with 1.

v4:
- also check if cggroup_mutex is held.
- make it an inline function.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>

As cgroup id has been used in netprio cgroup and will be used in memcg,
it's important to make it clear how a cgroup id is allocated.

For example, in netprio cgroup, the id is used as index of anarray.
Signed-off-by: Li Zefan <lizefan@huwei.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>

This enables us to lookup a cgroup by its id.

v4:
- add a comment for idr_remove() in cgroup_offline_fn().

v3:
- on success, idr_alloc() returns the id but not 0, so fix the BUG_ON()
  in cgroup_init().
- pass the right value to idr_alloc() so that the id for dummy cgroup is 0.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>

Constantly use @cset for css_set variables and use @cgrp as cgroup
variables.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

We can use struct cfent instead.

v2:
- remove cgroup_seqfile_release().
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

This should have been removed in commit d7eeac19
("cgroup: hold cgroup_mutex before calling css_offline").

While at it, update the comments.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

ss->css_free() is not called when perfcpu_ref_init() fails.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Comment for cpuset_css_offline() was on top of cpuset_css_free().
Move it.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

get rid of the useless forward declaration of the struct cpuset cause the 
below define it.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

rebind_subsystems() performs santiy checks even on subsystems which
aren't specified to be added or removed and the checks aren't all that
useful given that these are in a very cold path while the violations
they check would trip up in much hotter paths.

Let's remove these from rebind_subsystems().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>

Module ref handling in cgroup is rather weird.
parse_cgroupfs_options() grabs all the modules for the specified
subsystems.  A module ref is kept if the specified subsystem is newly
bound to the hierarchy.  If not, or the operation fails, the refs are
dropped.  This scatters module ref handling across multiple functions
making it difficult to track.  It also make the function nasty to use
for dynamic subsystem binding which is necessary for the planned
unified hierarchy.

There's nothing which requires the subsystem modules to be pinned
between parse_cgroupfs_options() and rebind_subsystems() in both mount
and remount paths.  parse_cgroupfs_options() can just parse and
rebind_subsystems() can handle pinning the subsystems that it wants to
bind, which is a natural part of its task - binding - anyway.

Move module ref handling into rebind_subsystems() which makes the code
a lot simpler - modules are gotten iff it's gonna be bound and put iff
unbound or binding fails.

v2: Li pointed out that if a controller module is unloaded between
    parsing and binding, rebind_subsystems() won't notice the missing
    controller as it only iterates through existing controllers.  Fix
    it by updating rebind_subsystems() to compare @added_mask to
    @pinned and fail with -ENOENT if they don't match.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>

task_cgroup_path_from_hierarchy() was added for the planned new users
and none of the currently planned users wants to know about multiple
hierarchies.  This patch drops the multiple hierarchy part and makes
it always return the path in the first non-dummy hierarchy.

As unified hierarchy will always have id 1, this is guaranteed to
return the path for the unified hierarchy if mounted; otherwise, it
will return the path from the hierarchy which happens to occupy the
lowest hierarchy id, which will usually be the first hierarchy mounted
after boot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jan Kaluža <jkaluza@redhat.com>

rebind_subsystems() currently fails if the hierarchy has any !root
cgroups; however, on the planned unified hierarchy,
rebind_subsystems() will be used while populated.  Move the test to
cgroup_remount(), which is the only place the test is necessary
anyway.

As it's impossible for the other two callers of rebind_subsystems() to
have populated hierarchy, this doesn't make any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>

Currently, creating and removing cgroup files in the root directory
are handled separately from the actual subsystem binding and unbinding
which happens in rebind_subsystems().  Also, rebind_subsystems() users
aren't handling file creation errors properly.  Let's integrate
top_cgroup file handling into rebind_subsystems() so that it's simpler
to use and everyone handles file creation errors correctly.

* On a successful return, rebind_subsystems() is guaranteed to have
  created all files of the new subsystems and deleted the ones
  belonging to the removed subsystems.  After a failure, no file is
  created or removed.

* cgroup_remount() no longer needs to make explicit populate/clear
  calls as it's all handled by rebind_subsystems(), and it gets proper
  error handling automatically.

* cgroup_mount() has been updated such that the root dentry and cgroup
  are linked before rebind_subsystems().  Also, the init_cred dancing
  and base file handling are moved right above rebind_subsystems()
  call and proper error handling for the base files is added.  While
  at it, add a comment explaining what's going on with the cred thing.

* cgroup_kill_sb() calls rebind_subsystems() to unbind all subsystems
  which now implies removing all subsystem files which requires the
  directory's i_mutex.  Grab it.  This means that files on the root
  cgroup are removed earlier - they used to be deleted from generic
  super_block cleanup from vfs.  This doesn't lead to any functional
  difference and it's cleaner to do the clean up explicitly for all
  files.

Combined with the previous changes, this makes all cgroup file
creation errors handled correctly.

v2: Added comment on init_cred.

v3: Li spotted that cgroup_mount() wasn't freeing tmp_links after base
    file addition failure.  Fix it by adding free_tmp_links error
    handling label.

v4: v3 introduced build bugs which got noticed by Fengguang's awesome
    kbuild test robot.  Fixed, and shame on me.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>

rebind_subsystems() will be updated to handle file creations and
removals with proper error handling and to do that will need to
perform file operations before actually adding the subsystem to the
hierarchy.

To enable such usage, update cgroup_populate/clear_dir() to use
for_each_subsys() instead of for_each_root_subsys() so that they
operate on all subsystems specified by @subsys_mask whether that
subsystem is currently bound to the hierarchy or not.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>

cgroup_populate_dir() didn't use to check whether the actual file
creations were successful and could return success with only subset of
the requested files created, which is nasty.

This patch udpates cgroup_populate_dir() so that it either succeeds
with all files or fails with no file.

v2: The original patch also converted for_each_root_subsys() usages to
    for_each_subsys() without explaining why.  That part has been
    moved to a separate patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>

cgroup_populate/clear_dir() currently take @base_files and adds and
removes, respectively, cgroup_base_files[] to the directory.  File
additions and removals are being reorganized for proper error handling
and more dynamic handling for the unified hierarchy, and mixing base
and subsys file handling into the same functions gets a bit confusing.

This patch moves base file handling out of cgroup_populate/clear_dir()
into their users - cgroup_mount(), cgroup_create() and
cgroup_destroy_locked().

Note that this changes the behavior of base file removal.  If
@base_files is %true, cgroup_clear_dir() used to delete files
regardless of cftype until there's no files left.  Now, only files
with matching cfts are removed.  As files can only be created by the
base or registered cftypes, this shouldn't result in any behavior
difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>

cgroup_add_cftypes() uses cgroup_cfts_commit() to actually create the
files; however, both functions ignore actual file creation errors and
just assume success.  This can lead to, for example, blkio hierarchy
with some of the cgroups with only subset of interface files populated
after cfq-iosched is loaded under heavy memory pressure, which is
nasty.

This patch updates cgroup_cfts_commit() and cgroup_add_cftypes() to
guarantee that all files are created on success and no file is created
on failure.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>

cgroup_addrm_files() mishandled error return value from
cgroup_add_file() and returns error iff the last file fails to create.
As we're in the process of cleaning up file add/rm error handling and
will reliably propagate file creation failures, there's no point in
keeping adding files after a failure.

Replace the broken error collection logic with immediate error return.
While at it, add lockdep assertions and function comment.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>

* Rename it to cgroup_clear_dir() and make it take the pointer to the
  target cgroup instead of the the dentry.  This makes the function
  consistent with its counterpart - cgroup_populate_dir().

* Move cgroup_clear_directory() invocation from cgroup_d_remove_dir()
  to cgroup_remount() so that the function doesn't have to determine
  the cgroup pointer back from the dentry.  cgroup_d_remove_dir() now
  only deals with vfs, which is slightly cleaner.

This patch doesn't introduce any functional differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>

Pull device-mapper changes from Alasdair G Kergon:
 "Add a device-mapper target called dm-switch to provide a multipath
  framework for storage arrays that dynamically reconfigure their
  preferred paths for different device regions.

  Fix a bug in the verity target that prevented its use with some
  specific sizes of devices.

  Improve some locking mechanisms in the device-mapper core and bufio.

  Add Mike Snitzer as a device-mapper maintainer.

  A few more clean-ups and fixes"

* tag 'dm-3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm: add switch target
  dm: update maintainers
  dm: optimize reorder structure
  dm: optimize use SRCU and RCU
  dm bufio: submit writes outside lock
  dm cache: fix arm link errors with inline
  dm verity: use __ffs and __fls
  dm flakey: correct ctr alloc failure mesg
  dm verity: remove pointless comparison
  dm: use __GFP_HIGHMEM in __vmalloc
  dm verity: fix inability to use a few specific devices sizes
  dm ioctl: set noio flag to avoid __vmalloc deadlock
  dm mpath: fix ioctl deadlock when no paths

Pull core block IO updates from Jens Axboe:
 "Here are the core IO block bits for 3.11. It contains:

   - A tweak to the reserved tag logic from Jan, for weirdo devices with
     just 3 free tags.  But for those it improves things substantially
     for random writes.

   - Periodic writeback fix from Jan.  Marked for stable as well.

   - Fix for a race condition in IO scheduler switching from Jianpeng.

   - The hierarchical blk-cgroup support from Tejun.  This is the grunt
     of the series.

   - blk-throttle fix from Vivek.

  Just a note that I'm in the middle of a relocation, whole family is
  flying out tomorrow.  Hence I will be awal the remainder of this week,
  but back at work again on Monday the 15th.  CC'ing Tejun, since any
  potential "surprises" will most likely be from the blk-cgroup work.
  But it's been brewing for a while and sitting in my tree and
  linux-next for a long time, so should be solid."

* 'for-3.11/core' of git://git.kernel.dk/linux-block: (36 commits)
  elevator: Fix a race in elevator switching
  block: Reserve only one queue tag for sync IO if only 3 tags are available
  writeback: Fix periodic writeback after fs mount
  blk-throttle: implement proper hierarchy support
  blk-throttle: implement throtl_grp->has_rules[]
  blk-throttle: Account for child group's start time in parent while bio climbs up
  blk-throttle: add throtl_qnode for dispatch fairness
  blk-throttle: make throtl_pending_timer_fn() ready for hierarchy
  blk-throttle: make tg_dispatch_one_bio() ready for hierarchy
  blk-throttle: make blk_throtl_bio() ready for hierarchy
  blk-throttle: make blk_throtl_drain() ready for hierarchy
  blk-throttle: dispatch from throtl_pending_timer_fn()
  blk-throttle: implement dispatch looping
  blk-throttle: separate out throtl_service_queue->pending_timer from throtl_data->dispatch_work
  blk-throttle: set REQ_THROTTLED from throtl_charge_bio() and gate stats update with it
  blk-throttle: implement sq_to_tg(), sq_to_td() and throtl_log()
  blk-throttle: add throtl_service_queue->parent_sq
  blk-throttle: generalize update_disptime optimization in blk_throtl_bio()
  blk-throttle: dispatch to throtl_data->service_queue.bio_lists[]
  blk-throttle: move bio_lists[] and friends to throtl_service_queue
  ...

Pull SCSI target updates from Nicholas Bellinger:
 "Lots of activity this round on performance improvements in target-core
  while benchmarking the prototype scsi-mq initiator code with
  vhost-scsi fabric ports, along with a number of iscsi/iser-target
  improvements and hardening fixes for exception path cases post v3.10
  merge.

  The highlights include:

   - Make persistent reservations APTPL buffer allocated on-demand, and
     drop per t10_reservation buffer.  (grover)
   - Make virtual LUN=0 a NULLIO device, and skip allocation of NULLIO
     device pages (grover)
   - Add transport_cmd_check_stop write_pending bit to avoid extra
     access of ->t_state_lock is WRITE I/O submission fast-path.  (nab)
   - Drop unnecessary CMD_T_DEV_ACTIVE check from
     transport_lun_remove_cmd to avoid extra access of ->t_state_lock in
     release fast-path.  (nab)
   - Avoid extra t_state_lock access in __target_execute_cmd fast-path
     (nab)
   - Drop unnecessary vhost-scsi wait_for_tasks=true usage +
     ->t_state_lock access in release fast-path.  (nab)
   - Convert vhost-scsi to use modern se_cmd->cmd_kref
     TARGET_SCF_ACK_KREF usage (nab)
   - Add tracepoints for SCSI commands being processed (roland)
   - Refactoring of iscsi-target handling of ISCSI_OP_NOOP +
     ISCSI_OP_TEXT to be transport independent (nab)
   - Add iscsi-target SendTargets=$IQN support for in-band discovery
     (nab)
   - Add iser-target support for in-band discovery (nab + Or)
   - Add iscsi-target demo-mode TPG authentication context support (nab)
   - Fix isert_put_reject payload buffer post (nab)
   - Fix iscsit_add_reject* usage for iser (nab)
   - Fix iscsit_sequence_cmd reject handling for iser (nab)
   - Fix ISCSI_OP_SCSI_TMFUNC handling for iser (nab)
   - Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED (nab)

  The last five iscsi/iser-target items are CC'ed to stable, as they do
  address issues present in v3.10 code.  They are certainly larger than
  I'd like for stable patch set, but are important to ensure proper
  REJECT exception handling in iser-target for 3.10.y"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits)
  iser-target: Ignore non TEXT + LOGOUT opcodes for discovery
  target: make queue_tm_rsp() return void
  target: remove unused codes from enum tcm_tmrsp_table
  iscsi-target: kstrtou* configfs attribute parameter cleanups
  iscsi-target: Fix tfc_tpg_auth_cit configfs length overflow
  iscsi-target: Fix tfc_tpg_nacl_auth_cit configfs length overflow
  iser-target: Add support for ISCSI_OP_TEXT opcode + payload handling
  iser-target: Rename sense_buf_[dma,len] to pdu_[dma,len]
  iser-target: Add vendor_err debug output
  target: Add (obsolete) checking for PMI/LBA fields in READ CAPACITY(10)
  target: Return correct sense data for IO past the end of a device
  target: Add tracepoints for SCSI commands being processed
  iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED
  iscsi-target: Fix ISCSI_OP_SCSI_TMFUNC handling for iser
  iscsi-target: Fix iscsit_sequence_cmd reject handling for iser
  iscsi-target: Fix iscsit_add_reject* usage for iser
  iser-target: Fix isert_put_reject payload buffer post
  iscsi-target: missing kfree() on error path
  iscsi-target: Drop left-over iscsi_conn->bad_hdr
  target: Make core_scsi3_update_and_write_aptpl return sense_reason_t
  ...

Pull sound fixes from Takashi Iwai:
 "A few small fixes (and cleanups) for HD-audio, USB-audio and ASoC"

* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: fix regression for fixed stream quirk
  ALSA: hda - Keep halting ALC5505 DSP
  ASoC: wm8962: fix NULL pdata pointer
  ASoC: imx-sgtl5000: return E_PROBE_DEFER if ssi/codec not found
  ASoC: Samsung: Remove redundant comment
  ALSA: hda - Fix EAPD vmaster hook for AD1884 & co
  ASoC: samsung: Remove obsolete GPIO based DT pinmuxing
  ASoC: mxs: register saif mclk to clock framework

Pull remoteproc fixes from Ohad Ben-Cohen:
 "Trivial remoteproc fixes by Suman Anna, Wei Yongjun and Thomas Meyer"

* tag 'remoteproc-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
  remoteproc: Cocci spatch "memdup.spatch"
  remoteproc: free carveout memories only after unmapping them
  remoteproc/omap: fix a sparse warning
  remoteproc: fix checkpatch errors in remoteproc code
  remoteproc: fix error return code in rproc_fw_boot()

Pull Xtensa updates from Chris Zankel.

* tag 'xtensa-next-20130710' of git://github.com/czankel/xtensa-linux: (22 commits)
  xtensa: remove the second argument of __bio_kmap_atomic()
  xtensa: add static function tracer support
  xtensa: Flat DeviceTree copy not future-safe
  xtensa: check TLB sanity on return to userspace
  xtensa: adjust boot parameters address when INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is selected
  xtensa: bootparams: fix typo
  xtensa: tell git to ignore generated .dtb files
  xtensa: ccount based sched_clock
  xtensa: ccount based clockevent implementation
  xtensa: consolidate ccount access routines
  xtensa: cleanup ccount frequency tracking
  xtensa: timex.h: remove unused symbols
  xtensa: tell git to ignore copied zlib source files
  xtensa: fix section mismatch in pcibios_fixup_bus
  xtensa: ISS: fix section mismatch in iss_net_setup
  arch: xtensa: include: asm: compiling issue, need cmpxchg64() defined.
  xtensa: xtfpga: fix section mismatch
  xtensa: remove unused platform_init_irq()
  xtensa: tell git to ignore generated files
  xtensa: flush TLB entries for pages of non-current mm correctly
  ...

Pull more power management and ACPI updates from Rafael Wysocki:

 - Fix for a recent cpufreq regression that caused WARN() to trigger
   overzealously in a couple of places and spam the kernel log with
   useless garbage as a result.  From Viresh Kumar.

 - ACPI dock fix removing a discrepancy between the definition of
   acpi_dock_init(), which says that the function returns int, and its
   header in the header file, which says that it is a void function.
   The function is now defined as void too.

 - ACPI PM fix for failures to update device power states as needed, for
   example, during resume from system suspend, because the old state was
   deeper than the new one, but the new one is not D0.

 - Fix for two debug messages in the ACPI power resources code that
   don't have a newline at the end and make the kernel log difficult to
   read.  From Mika Westerberg.

 - Two ACPI cleanups from Naresh Bhat and Haicheng Li.

 - cpupower updates from Thomas Renninger, including Intel Haswell
   support improvements and a new idle-set subcommand among other
   things.

* tag 'pm+acpi-3.11-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / power: add missing newline to debug messages
  cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states
  cpupower: Haswell also supports the C-states introduced with SandyBridge
  cpupower: Introduce idle-set subcommand and C-state enabling/disabling
  cpupower: Implement disabling of cstate interface
  cpupower: Make idlestate usage unsigned
  ACPI / fan: Initialize acpi_state variable
  ACPI / scan: remove unused LIST_HEAD(acpi_device_list)
  ACPI / dock: Actually define acpi_dock_init() as void
  ACPI / PM: Fix corner case in acpi_bus_update_power()
  cpufreq: Fix serialization of frequency transitions

Pull thermal management updates from Zhang Rui:
 "There are not too many changes this time, except two new platform
  thermal drivers, ti-soc-thermal driver and x86_pkg_temp_thermal
  driver, and a couple of small fixes.

  Highlights:

   - move the ti-soc-thermal driver out of the staging tree to the
     thermal tree.

   - introduce the x86_pkg_temp_thermal driver.  This driver registers
     CPU digital temperature package level sensor as a thermal zone.

   - small fixes/cleanups including removing redundant use of
     platform_set_drvdata() and of_match_ptr for all platform thermal
     drivers"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (34 commits)
  thermal: cpu_cooling: fix stub function
  thermal: ti-soc-thermal: use standard GPIO DT bindings
  thermal: MAINTAINERS: Add git tree path for SoC specific updates
  thermal: fix x86_pkg_temp_thermal.c build and Kconfig
  Thermal: Documentation for x86 package temperature thermal driver
  Thermal: CPU Package temperature thermal
  thermal: consider emul_temperature while computing trend
  thermal: ti-soc-thermal: add DT example for DRA752 chip
  thermal: ti-soc-thermal: add dra752 chip to device table
  thermal: ti-soc-thermal: add thermal data for DRA752 chips
  thermal: ti-soc-thermal: remove usage of IS_ERR_OR_NULL
  thermal: ti-soc-thermal: freeze FSM while computing trend
  thermal: ti-soc-thermal: remove external heat while extrapolating hotspot
  thermal: ti-soc-thermal: update DT reference for OMAP5430
  x86, mcheck, therm_throt: Process package thresholds
  thermal: cpu_cooling: fix 'descend' check in get_property()
  Thermal: spear: Remove redundant use of of_match_ptr
  Thermal: kirkwood: Remove redundant use of of_match_ptr
  Thermal: dove: Remove redundant use of of_match_ptr
  Thermal: armada: Remove redundant use of of_match_ptr
  ...

Pull second set of NFS client updates from Trond Myklebust:
 "This mainly contains some small readdir optimisations that had
  dependencies on Al Viro's readdir rewrite.  There is also a fix for a
  nasty deadlock which surfaced earlier in this merge window.

  Highlights include:
   - Fix an_rpc pipefs regression that causes a deadlock on mount
   - Readdir optimisations by Scott Mayhew and Jeff Layton
   - clean up the rpc_pipefs dentry operation setup"

* tag 'nfs-for-3.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Fix a deadlock in rpc_client_register()
  rpc_pipe: rpc_dir_inode_operations can be static
  NFS: Allow nfs_updatepage to extend a write under additional circumstances
  NFS: Make nfs_readdir revalidate less often
  NFS: Make nfs_attribute_cache_expired() non-static
  rpc_pipe: set dentry operations at d_alloc time
  nfs: set verifier on existing dentries in nfs_prime_dcache

Merge tag 'for-linus-3.11-merge-window-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs

Pull second round of 9p patches from Eric Van Hensbergen:
 "Several of these patches were rebased in order to correct style
  issues.  Only stylistic changes were made versus the patches which
  were in linux-next for two weeks.  The rebases have been in linux-next
  for 3 days and have passed my regressions.

  The bulk of these are RDMA fixes and improvements.  There's also some
  additions on the extended attributes front to support some additional
  namespaces and a new option for TCP to force allocation of mount
  requests from a priviledged port"

* tag 'for-linus-3.11-merge-window-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: Remove the unused variable "err" in v9fs_vfs_getattr()
  9P: Add cancelled() to the transport functions.
  9P/RDMA: count posted buffers without a pending request
  9P/RDMA: Improve error handling in rdma_request
  9P/RDMA: Do not free req->rc in error handling in rdma_request()
  9P/RDMA: Use a semaphore to protect the RQ
  9P/RDMA: Protect against duplicate replies
  9P/RDMA: increase P9_RDMA_MAXSIZE to 1MB
  9pnet: refactor struct p9_fcall alloc code
  9P/RDMA: rdma_request() needs not allocate req->rc
  9P: Fix fcall allocation for rdma
  fs/9p: xattr: add trusted and security namespaces
  net/9p: add privport option to 9p tcp transport

Merge tag 'ecryptfs-3.11-rc1-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull eCryptfs updates from Tyler Hicks:
 "Code cleanups and improved buffer handling during page crypto
  operations:
   - Remove redundant code by merging some encrypt and decrypt functions
   - Get rid of a helper page allocation during page decryption by using
     in-place decryption
   - Better use of entire pages during page crypto operations
   - Several code cleanups"

* tag 'ecryptfs-3.11-rc1-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  Use ecryptfs_dentry_to_lower_path in a couple of places
  eCryptfs: Make extent and scatterlist crypt function parameters similar
  eCryptfs: Collapse crypt_page_offset() into crypt_extent()
  eCryptfs: Merge ecryptfs_encrypt_extent() and ecryptfs_decrypt_extent()
  eCryptfs: Combine page_offset crypto functions
  eCryptfs: Combine encrypt_scatterlist() and decrypt_scatterlist()
  eCryptfs: Decrypt pages in-place
  eCryptfs: Accept one offset parameter in page offset crypto functions
  eCryptfs: Simplify lower file offset calculation
  eCryptfs: Read/write entire page during page IO
  eCryptfs: Use entire helper page during page crypto operations
  eCryptfs: Cocci spatch "memdup.spatch"

Pull jfs update from Dave Kleikamp:
 "A couple cleanups to JFS for 3.11"

* tag 'jfs-3.11' of git://github.com/kleikamp/linux-shaggy:
  jfs: Update jfs_error
  jfs: fix sparse warning in fs/jfs/xattr.c

Pull nfsd changes from Bruce Fields:
 "Changes this time include:

   - 4.1 enabled on the server by default: the last 4.1-specific issues
     I know of are fixed, so we're not going to find the rest of the
     bugs without more exposure.
   - Experimental support for NFSv4.2 MAC Labeling (to allow running
     selinux over NFS), from Dave Quigley.
   - Fixes for some delicate cache/upcall races that could cause rare
     server hangs; thanks to Neil Brown and Bodo Stroesser for extreme
     debugging persistence.
   - Fixes for some bugs found at the recent NFS bakeathon, mostly v4
     and v4.1-specific, but also a generic bug handling fragmented rpc
     calls"

* 'for-3.11' of git://linux-nfs.org/~bfields/linux: (31 commits)
  nfsd4: support minorversion 1 by default
  nfsd4: allow destroy_session over destroyed session
  svcrpc: fix failures to handle -1 uid's
  sunrpc: Don't schedule an upcall on a replaced cache entry.
  net/sunrpc: xpt_auth_cache should be ignored when expired.
  sunrpc/cache: ensure items removed from cache do not have pending upcalls.
  sunrpc/cache: use cache_fresh_unlocked consistently and correctly.
  sunrpc/cache: remove races with queuing an upcall.
  nfsd4: return delegation immediately if lease fails
  nfsd4: do not throw away 4.1 lock state on last unlock
  nfsd4: delegation-based open reclaims should bypass permissions
  svcrpc: don't error out on small tcp fragment
  svcrpc: fix handling of too-short rpc's
  nfsd4: minor read_buf cleanup
  nfsd4: fix decoding of compounds across page boundaries
  nfsd4: clean up nfs4_open_delegation
  NFSD: Don't give out read delegations on creates
  nfsd4: allow client to send no cb_sec flavors
  nfsd4: fail attempts to request gss on the backchannel
  nfsd4: implement minimal SP4_MACH_CRED
  ...

Pull tracing changes from Steven Rostedt:
 "The majority of the changes here are cleanups for the large changes
  that were added to 3.10, which includes several bug fixes that have
  been marked for stable.

  As for new features, there were a few, but nothing to write to LWN
  about.  These include:

  New function trigger called "dump" and "cpudump" that will cause
  ftrace to dump its buffer to the console when the function is called.
  The difference between "dump" and "cpudump" is that "dump" will dump
  the entire contents of the ftrace buffer, where as "cpudump" will only
  dump the contents of the ftrace buffer for the CPU that called the
  function.

  Another small enhancement is a new sysctl switch called
  "traceoff_on_warning" which, when enabled, will disable tracing if any
  WARN_ON() is triggered.  This is useful if you want to debug what
  caused a warning and do not want to risk losing your trace data by the
  ring buffer overwriting the data before you can disable it.  There's
  also a kernel command line option that will make this enabled at boot
  up called the same thing"

* tag 'trace-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (34 commits)
  tracing: Make tracing_open_generic_{tr,tc}() static
  tracing: Remove ftrace() function
  tracing: Remove TRACE_EVENT_TYPE enum definition
  tracing: Make tracer_tracing_{off,on,is_on}() static
  tracing: Fix irqs-off tag display in syscall tracing
  uprobes: Fix return value in error handling path
  tracing: Fix race between deleting buffer and setting events
  tracing: Add trace_array_get/put() to event handling
  tracing: Get trace_array ref counts when accessing trace files
  tracing: Add trace_array_get/put() to handle instance refs better
  tracing: Protect ftrace_trace_arrays list in trace_events.c
  tracing: Make trace_marker use the correct per-instance buffer
  ftrace: Do not run selftest if command line parameter is set
  tracing/kprobes: Don't pass addr=ip to perf_trace_buf_submit()
  tracing: Use flag buffer_disabled for irqsoff tracer
  tracing/kprobes: Turn trace_probe->files into list_head
  tracing: Fix disabling of soft disable
  tracing: Add missing syscall_metadata comment
  tracing: Simplify code for showing of soft disabled flag
  tracing/kprobes: Kill probe_enable_lock
  ...

This reverts commit d2aae847.

It is completely and utterly broken.  Module install should not build
any files, and adding broken dependencies to "help" it build files is
complete and utter sh*t.

The kernel should not be built by root, and "make install" and "make
module_install" (that for obvious reasons need to be run as root)
absolutely must not build any files.  They should only ever copy the
already-built files over.

So having dependencies for the install targets is wrong, wrong, wrong.

If you try to install a kernel without building it first, you *should*
get errors. The build system shouldn't try to help root build the files.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more KVM changes from Gleb Natapov:
 "A fix for a bug that prevents some guests from working on old Intel
  CPUs and a patch that integrates ARM64 KVM, merged via ARM64 tree,
  into Kconfig."

* tag 'kvm-3.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: mark unusable segment as nonpresent
  arm64: KVM: Kconfig integration

Pull Sparc bugfixes from David Miller:
 "Four bug fixes:

   1) Enable snoop tags properly on Sparc32/LEON, from Andreas Larsson

   2) strcpy() length check fix from Chen Gang.

   3) Forgotten unregister_netdev() in sunvnet driver, from Dave
      Kleikamp.

   4) Fix broken assembler offsets used in vm_area_struct accesses on
      sparc32, from Olivier DANET."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  [PATCH] sparc32: vm_area_struct access for old Sun SPARCs.
  sunvnet: vnet_port_remove must call unregister_netdev
  sparc32, leon: Require separate snoop tags set to regard snooping to be enabled
  arch: sparc: kernel: check the memory length before use strcpy().