1. 25 Mar, 2004 13 commits
    • Erik Rigtorp's avatar
      [PATCH] USB: new cypress thermometer driver · 61e91dd2
      Erik Rigtorp authored
      61e91dd2
    • Petko Manolov's avatar
      [PATCH] USB: rtl8150 update · 1affd9da
      Petko Manolov authored
      adds two more vid/did and better packet error statistics.  Link
      detection also has been added.
      1affd9da
    • David Brownell's avatar
      [PATCH] USB: gadget zero does endpoint autoconfig · 71640f89
      David Brownell authored
      Here's where all those preceding autoconfig patches start
      to fit together:  one gadget driver gets rid of almost all
      the controller-specific #ifdeffery.
      
      Two of the other gadget drivers can do the same thing,
      and just as easily:  file storage, and serial.  (I'll
      hope their maintainers do those changes though.)
      
      The "ether.c" gadget driver is a lot more complicated to
      do this way since it has to cope with some differences
      by switching to alternate protocols (CDC Ethernet vs
      a subset) and soon be able to handle RNDIS.  So that'll
      be a while yet.
      
      
      Gadget Zero learns to autoconfigure.
      
          - Gets rid of remaining controller-specific #ifdeffery.  Now
            hardware choices can be made at run time too (not just
            compile time).
      
          - Simplifies its use of the "DEBUG" CPP symbol.
      
          - Force device to report itself consistently as self-powered.
      71640f89
    • Michael Still's avatar
      [PATCH] USB: kernel-doc comment tweak · 4992d46a
      Michael Still authored
      Correct kernel-doc comment with incorrect parameters documented
      4992d46a
    • Gude Analog- und Digitalsysteme GmbH's avatar
      [PATCH] USB: FTDI 232BM "USB-RS232 OptoBridge" · 08e60f3a
      Gude Analog- und Digitalsysteme GmbH authored
      we (the german company Gude Analog und Digitalsysteme GmbH,
      http://www.gude.info) have manufactored a USB<->RS232 adapter with
      galvanic isolated RS232 Interface. Data is transmitted by optical
      signals only.
      
      The Product's name is "USB-RS232 OptoBridge".
      We used the FTDI 233BM Chip with PID 0xE889 (VID 0x0403).
      The Product will be released this Cebit 2004.
      
      Could you please extend the ftdi_sio code with this PID.
      You find a .diff file attached which I have tested with kernel 2.6.4
      
      At http://ftdi-usb-sio.sourceforge.net/ I saw that you provide a patch
      for 2.4.x kernels. Will our PID also find it's way in this back-ported
      driver patch?
      
      In the future (in the next 10 month), our company will have some more
      Products using the FTDI Chip. The PID's FTDI already allocated for us
      are: E888 to E88F and E808 to E80F
      
      
      Thank you very much,
         Martin Bachem
      08e60f3a
    • Jeff Garzik's avatar
      [PATCH] forgotten pci_dma_mapping_error on x86-64 · 7d9432d8
      Jeff Garzik authored
      x86-64 needs this (obvious) patch, due to the rename.
      7d9432d8
    • Andrew Morton's avatar
      [PATCH] ia64: don't prompt for the floppy driver · 3b2c9f64
      Andrew Morton authored
      From: David Mosberger <davidm@napali.hpl.hp.com>
      
      From: Bjorn Helgaas <bjorn.helgaas@hp.com>
      
      We can't build floppy.o on ia64, so why bother asking?
      3b2c9f64
    • Andrew Morton's avatar
      [PATCH] don't show cdroms in /proc/partitions · a5a2b078
      Andrew Morton authored
      From: Jens Axboe <axboe@suse.de>
      
      Currently SCSI cdroms show up in /proc/partitions in 2.6, they didn't in
      2.4.  And ATAPI cdroms don't show up either.  Mark both as genhd removable
      for now, when they are partionable this can be updated.
      a5a2b078
    • Andrew Morton's avatar
      [PATCH] Broken CDROMs default to writeable · bd2a8f79
      Andrew Morton authored
      From: Jens Axboe <axboe@suse.de>
      
      If the drive doesn't support GPCMD_READ_DISC_INFO at all, permit writeable
      opens.
      bd2a8f79
    • Andrew Morton's avatar
      [PATCH] ext2&3: use the right i_flags in find_group_orlov() · e6626b78
      Andrew Morton authored
      Spotted by Jorn Engel <joern@wohnheim.fh-wedel.de>: both the generic and
      fs-specific parts of the inode have an i_flags.  find_group_orlov() is using
      the wrong one.
      e6626b78
    • Andrew Morton's avatar
      [PATCH] null-terminate sb->s_id · 1267b235
      Andrew Morton authored
      strncpy() may not null-terminate the destination.
      1267b235
    • Andrew Morton's avatar
      [PATCH] ppc64: SMT snooze fix in idle loop · b0887c1c
      Andrew Morton authored
      From: Olof Johansson <olof@austin.ibm.com>
      
      A smt_snooze_delay of 0 is supposed to mean "disabled", but current idle
      loop logic doesn't take that into account and snoozes immediately instead.
      
      Below patch fixes the logic in the idle loop, as well as cleans up the test
      a bit.  An idling processor might no longer see a snooze change
      immediately, but that's not needed anyway.
      b0887c1c
    • Andrew Morton's avatar
      [PATCH] ppc64: getdents patch for 32 -> 64 converter · 0e062700
      Andrew Morton authored
      From: Anton Blanchard <anton@samba.org>
      
      From: Marcus Meissner <meissner@suse.de>
      
      With 2.6.4 we now have the glorious hidden d_type passing in getdents.
      
      glibc CVS expects this to be passed if we have a kernel version after
      2.6.4, so we have to also handle it in the 32bit syscall converter.
      0e062700
  2. 24 Mar, 2004 12 commits
  3. 23 Mar, 2004 10 commits
  4. 22 Mar, 2004 5 commits
    • Andrew Morton's avatar
      [PATCH] i386 Kconfig typo fix · df2f5cb9
      Andrew Morton authored
      From: Armin Schindler <armin@melware.de>
      
      just a small patch to fix a typo.
      df2f5cb9
    • Andrew Morton's avatar
      [PATCH] fbcon font cloning fix · 38e4e1df
      Andrew Morton authored
      From: Petr Baudis <pasky@ucw.cz>
      
      This patch fixes a bug which I hit when migrating from 2.4.  Basically,
      when I do setfont during the system boot, the then-spawned ttys do not
      retain the new font but fall back to the default one.
      
      I've tracked that down to a clearly bogus test in fbcon_set_display(),
      because vc->vc_font.width is not set at that time yet (no font has been
      loaded for the new vc).  But even if it would (or this was meant to test
      against tmp->vc_font.width), it would mean only *HUGE* fonts would be
      retained.  And even if there were *two* bugs there and it was supposed to
      be less-than there, I couldn't make a sense of the test.
      38e4e1df
    • Andrew Morton's avatar
      [PATCH] Work around compiler error in proc_misc.c · 2d56ea2d
      Andrew Morton authored
      From: Alan Stern <stern@rowland.harvard.edu>
      
      A change which was recently applied to fs/proc/proc_misc.c included a comment
      about splitting a seq_printf into two pieces to work around a bug in
      gcc-2.95.3.  Unfortunately gcc-2.96 still chokes on the statements.  The
      patch below makes it work better and tidies the code up a bit.
      2d56ea2d
    • Andrew Morton's avatar
      [PATCH] sh: various fixes · e78a0b7a
      Andrew Morton authored
      From: Paul Mundt <lethal@linux-sh.org>
      
      This is the rest of the sh update, which includes everything else
      sh-specific, general cleanups, bugfixes, etc.  Nothing really eventful.
      e78a0b7a
    • Andrew Morton's avatar
      [PATCH] sh: sh-specific framebuffer updates · 7cb3c483
      Andrew Morton authored
      From: Paul Mundt <lethal@linux-sh.org>
      
      This includes sh-specific framebuffer updates, including updates to hitfb and
      pvr2fb, as well as adding sh to the pgprot_writecombine() users in fb_mmap().
      7cb3c483