- 09 Sep, 2005 40 commits
-
-
Manu Abraham authored
Identify board properly: Add functions to retrieve MAC Address, FW details, Card type and Vendor Information. Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Manu Abraham authored
Code Cleanup: o Remove debug noise o Remove debug module parameter debug level is achieved using the verbosity level o Updated to kernel coding style (case labels should not be indented) Signed-off-by:
-
Manu Abraham authored
Code Simplification: CA PMT object is not parsed in the driver anymore. Signed-off-by:
-
Manu Abraham authored
Make the Symbolrate setting card specific. Signed-off-by:
Manu Abraham <manu@kromtek.com> Signed-off-by:
-
Stuart Auchterlonie authored
Fix bug in Nebula DigiTV frontend detection for nxt6000. Signed-off-by:
Stuart Auchterlonie <stuarta@squashedfrog.net> Signed-off-by:
-
David Johnson authored
Add support for Nebula DigiTV PCI cards with the MT352 frontend. Signed-off-by:
David Johnson <dj@david-web.co.uk> Signed-off-by:
-
David Johnson authored
Indentation fixes and remove unnecessary braces. Signed-off-by:
-
Johannes Stezenbach authored
Endianness fix for risc DMA start address setting. (reported by Stefan Haubenthal/Peter Hettkamp) Signed-off-by:
-
Johannes Stezenbach authored
comment out noisy dprintk in dst_get_signal() (why are errors only visible with debug on? this needs to be cleaned up so we can disable debug by default) Signed-off-by:
-
Patrick Boettcher authored
This patch changes two things: 1) a firmware update made by the vendor, which has to be done in Windows for now, changes the DVB-data-pipe from isochronous to bulk: it fixes the data distortions (and thus the video-distortions) in DVB-T mode; there is no backwards compatibility with the old firmware as it didn't work anyway 2) with the help of Steve Toth some reverse-engineered functionality is now named correctly, thank you Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Patrick Boettcher authored
white space cleanup Signed-off-by:
-
Svante Olofsson authored
Add support for the NXT6000-based digitv-box. Add .get_tune_settings callback for the NXT6000 to have a min_tune_delay of 500ms. Signed-off-by:
Svante Olofsson <svante@agentum.com> Signed-off-by:
-
Patrick Boettcher authored
Change the init call to optionally return the new dvb_usb_device directly. Signed-off-by:
-
Patrick Boettcher authored
Added names for clones of the DVB-T stick. Whitespace cleanups. Signed-off-by:
-
Ye Jianjun (Joey authored
Fix: copy frontend_ops before modifying Signed-off-by:
Ye Jianjun (Joey) <joeyye@trident.com.cn> Signed-off-by:
-
Andreas Oberritter authored
Removed empty module_init/exit calls. Signed-off-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
Patrick Boettcher authored
Add USB IDs of the Kworld Xpert DVB-T USB2.0 (clone of the ADStech box). Thanks to Marcus Hagn for testing. Signed-off-by:
-
Patrick Boettcher authored
Add driver for the TwinhanDTV StarBox and clones. Thanks to Ralph Metzler for his initial work on this box and thanks to Twinhan for their support. Signed-off-by:
-
Mac Michaels authored
This fix has also been applied to lgdt330x. There is an optimization that keeps track of the frequency tuned by the digital decoder. The digital driver does not set the frequency if it has not changed since it was tuned. The analog tuner driver knows nothing about the frequency saved by the digital driver. When the frequency is set using the video4linux code with tvtime, the hardware get changed but the digital driver's state does not get updated. Switch back to the same digital channel and the driver finds no change in frequency so the tuner is not reset to the digital frequency. The work around is to remove the check and always set the tuner to the specified frequency. Signed-off-by:
Mac Michaels <wmichaels1@earthlink.net> Signed-off-by:
Michael Krufky <mkrufky@m1k.net> Signed-off-by:
-
Patrick Boettcher authored
while investigating the QAM_128-issue with the stv0297-driver for the Cablestar (which is not the same as the one in dvb-kernel CVS, yet), I fixed it, not by increasing the timeout, but by disabling the corner-detection for QAM_128 and higher. This patch has been tested on dvb-kernel cvs, and has been reported to work by multiple users. Some cards still need timeout increase on top of this patch. This will be addressed later. Signed-off-by:
-
Johannes Stezenbach authored
Clean up timeout handling. Signed-off-by:
-
Adam Szalkowski authored
Fix DiSEqC problems. Signed-off-by:
Adam Szalkowski <adam@szalkowski.de> Signed-off-by:
-
Johannes Stezenbach authored
Fix DiSEqC switching (one bug fix suggested by Peter Hettkamp, and one experimentally determined msleep(30) suggested by Adam Szalkowski). Signed-off-by:
-
Johannes Stezenbach authored
Reset acgconf register after tuning to improve locking, as suggested by Marco Schluessler. Minor cleanups in ves1820_init(). Signed-off-by:
-
Andrew de Quincey authored
Fix SNR reading Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
-
Andrew de Quincey authored
Allow the stv0299 to read the BER and UCBLOCKS. Signed-off-by:
-
Andrew de Quincey authored
Misc. fixes. Signed-off-by:
-
Andreas Oberritter authored
Pass a pointer to the i2c bus to the pll callbacks (stv0299 only). It was not possible to tell which i2c bus should be used if an adapter has multiple frontends on multiple i2c buses. Signed-off-by:
-
Barry Scott authored
Fix two problems with the signal strength value in the mt352.c frontend: 1. the 4 most significant bits are zeroed - shift and mask wrong way round 2. need to align the 12 bits from the registers at the top of the 16 bit returned value - otherwise the range is not 0 to 0xffff its 0xf000 to 0xffff Signed-off-by:
Barry Scott <barry.scott@onelan.co.uk> Signed-off-by:
-
Dominique Dumont authored
Patch from Dominique Dumont to get the SCM Red Viaccess CAM working with the budget-ci. Signed-off-by:
Dominique Dumont <domi.dumont@free.fr> Signed-off-by:
-
Andreas Oberritter authored
Formatting fixes (Lindent + some handwork). Signed-off-by:
-
Andreas Oberritter authored
Use INIT_LIST_HEAD for frontend_list. Signed-off-by:
-
Andreas Oberritter authored
Removed more unused variables and constants. Signed-off-by:
-
Andreas Oberritter authored
Removed unused descramble_mac_address and descramble_section_payload callbacks. Signed-off-by:
-
Andreas Oberritter authored
Removed some useless functions and variables. Signed-off-by:
-
Andreas Oberritter authored
Don't return immediately from dvb_dmx_swfilter_section_packet() if CC is not ok. Otherwise a new feed drops all packets until the first packet with CC=0 arrives. Signed-off-by:
-
Andreas Oberritter authored
Glue code for DMX_GET_CAPS and DMX_SET_SOURCE ioctls. Signed-off-by:
-
Johannes Stezenbach authored
Don't build empty built-in.o when DVB/V4L is not configured. Thanks to Sam Ravnborg and Keith Owens. Signed-off-by:
-
Olaf Hering authored
Remove all #include <linux/version.h> and all references to LINUX_VERSION_CODE and KERNEL_VERSION. Based on patch by Olaf Hering. Signed-off-by:
Olaf Hering <olh@suse.de> Signed-off-by:
-
Johannes Stezenbach authored
Update email address of Peter Hettkamp. Signed-off-by:
-
