- 06 Sep, 2014 8 commits
-
-
Alexander Duyck authored
The phy timestamping takes a different path than the regular timestamping does in that it will create a clone first so that the packets needing to be timestamped can be placed in a queue, or the context block could be used. In order to support these use cases I am pulling the core of the code out so it can be used in other drivers beyond just phy devices. In addition I have added a destructor named sock_efree which is meant to provide a simple way for dropping the reference to skb exceptions that aren't part of either the receive or send windows for the socket, and I have removed some duplication in spots where this destructor could be used in place of sock_edemux. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This change merges the shared bits that exist between skb_tx_tstamp and skb_complete_tx_timestamp. By doing this we can avoid the two diverging as there were already changes pushed into skb_tx_tstamp that hadn't made it into the other function. In addition this resolves issues with the fact that skb_complete_tx_timestamp was included in linux/skbuff.h even though it was only compiled in if phy timestamping was enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Lets make this hash function a bit secure, as ICMP attacks are still in the wild. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
A buffer is incorrectly zeroed to the length of the pointer. If cfg_payload_len < sizeof(void *) this can overwrites unrelated memory. The buffer contents are never read, so no need to zero. Fixes: 8fe2f761 ("net-timestamp: expand documentation") Reported-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We try to call free_netvsc_device(net_device) when "net_device" is NULL. It leads to an Oops. Fixes: f90251c8 ('hyperv: Increase the buffer length for netvsc_channel_cb()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-09-04 This series contains updates to i40e, i40evf, ixgbe and ixgbevf. Catherine adds dual speed module support to i40e. Updates i40e to allow the user to change link settings when the link is down. Serey renames i40e_ndo_set_vf_spoofck() to i40e_ndo_set_vf_spookchk() to be more consistent with what is defined in netdev and removes a unnecessary variable assignment. Jesse makes a malicious driver detection warning only print if extended driver string is enabled for i40e. Fixes a panic under traffic load when resetting or if/whenever there was a Tx-timeout because we were enabling the Tx queue to early. Anjali fixes an issue when PF reset fails, where we were trying to restart the admin queue which has not been setup at that point. This resolves an occasional kernel panic when PF reset fails for some reason. Ethan Zhao replaces the use of a local i40e_vfs_are_assigned() with the global kernel pci_vfs_assigned() for i40e. Alex cleans up the FDB handling for ixgbe. This change makes it so that the behavior for FDB handling is consistent between both the SR-IOV and non-SR-IOV cases. The main change is that we perform bounds checking on the number of SR-IOV addresses regardless of if SR-IOV is enabled or not as we can only support a certain number of addresses in the hardware. Emil extends the pending Tx work check to the VF interfaces, where the driver initiates a reset of the interface on link loss with pending Tx work in order to clear the rings. Introduces a delay for 82599 VFs of at least 500 usecs to make sure the VFLINKS value is correct, since this bit tends to flap when a DA or SFP+ cable is disconnected. Jacob adds code comments in ixgbe to make it more obvious that we are resetting features based on the fact that we do not have MSI-X enabled, and cannot use the previous settings. Also resolves a kernel NULL pointer dereference by limiting the combined total of MACVLAN and SR-IOV VFs, since the hardware has a limited number of pools available (64). Previously, no checks were in place to limit the number of accelerated MACVLAN devices based on the number of pools, which would be ok since there was already a limit for these well below the number of available pools. However, SR-IOV uses the very same pools, therefore we need to ensure that the total number of pools does not exceed the number of pools available in the hardware. v2: - clean up code comment in patch 5 by replacing "an" with "auto negotiation" based on feedback from Sergei Shtylyov - removed un-necessary parenthesis around function call in patch 8 based on feedback from Sergei Shtylyov ====================
-
Daniel Mack authored
Simplify the interrupt resource lookup code in cpsw_probe() by the following: * Only look at the first member of the resource. As the driver only works for DT-enabled platforms anyway, a resource of type IORESOURCE_IRQ will only contain one single entry (res->start == res->end), so there is no need for the iteration. * Add a bounds check to avoid overflows if we are passed more than ARRAY_SIZE(priv->irqs_table) resources. * Assign 'ret' with the return value of devm_request_irq() so that cpsw_probe() returns the appropriate error code. * If devm_request_irq() fails, report the error code in the log message. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
nh_exceptions is effectively used under rcu, but lacks proper barriers. Between kzalloc() and setting of nh->nh_exceptions(), we need a proper memory barrier. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 4895c771 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Sep, 2014 18 commits
-
-
Andy Zhou authored
This syntax error was covered by L2TP_REFCNT_DEBUG not being set by default. Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver updates 2014-09-03 The following series of patches includes fixes/updates to the driver. - Query the device for the actual speed mode (KR/KX) rather than trying to track it - Update parallel detection logic to support KR mode - Fix new warnings from checkpatch in the amd-xgbe and amd-xgbe-phy driver This patch series is based on net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
This patch contains fixes identified by checkpatch when run with the strict option. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
This patch contains fixes identified by checkpatch when run with the strict option. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Add support to allow parallel detection to work in KR speed. With both speed modes of KX and KR supported, KX must be checked first. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Since device resets can change the current mode it's possible to think the device is in a different mode than it actually is. Rather than trying to determine every place that is needed to set/save the current mode, be safe and check the devices actual mode when needed rather than trying to track it. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hayes Wang says: ==================== r8152: random MAC address If the interface has invalid MAC address, it couldn't be used. In order to let it work normally, give a random one. v3: Remove ether_addr_copy(dev->perm_addr, dev->dev_addr); v2: Use "%pM" format specifier for printing a MAC address. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
If the hw doesn't have a valid MAC address, give a random one and set it to the hw. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
Exchange the location of rtl8152_set_mac_address() and set_ethernet_addr(). Then, the set_ethernet_addr() could set the MAC address by calling rtl8152_set_mac_address() later. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Govindarajulu Varadarajan says: ==================== enic: Add support for rx_copybreak The following series implements rx_copybreak. dma_map_single()/dma_unmap_single() is more expensive than alloc_skb & memcpy for smaller packets. By doing this we can reuse the dma buff which is already mapped. This is very useful when iommu is on. The default skb copybreak value is 256. When iommu is on, we can go much higher than 256. All the drivers that supports rx_copybreak provides module parameter to change this value. Since module parameter is the least preferred way for changing driver values, this series adds ethtool support for setting rx_copybreak. v4: Validate tunable length in ethtool_get_tunable, not in driver implemented function. Loose tunable_ops array for each tunable type. Define one function and let the driver use switch case for each type. Use double underscore for data type in UAPI headers. Use const qualifier where possible. v3: Add tunable namespace to ethtool. Use new ethtool cmd ETHTOOL_S/GTUNABLE to set/get rx_copybreak from userspace. v2: Add new ethtool_cmd for DMA buffer parameters, instead of adding new members to existing ethtool_ringparam. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Govindarajulu Varadarajan authored
This patch adds support for setting/getting rx_copybreak using generic ethtool tunable. Defines enic_get_tunable() & enic_set_tunable() to get/set rx_copybreak. As of now, these two function supports only rx_copybreak. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Govindarajulu Varadarajan authored
This patch adds new ethtool cmd, ETHTOOL_GTUNABLE & ETHTOOL_STUNABLE for getting tunable values from driver. Add get_tunable and set_tunable to ethtool_ops. Driver implements these functions for getting/setting tunable value. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Govindarajulu Varadarajan authored
Calling dma_map_single()/dma_unmap_single() is quite expensive compared to copying a small packet. So let's copy short frames and keep the buffers mapped. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Marcel reported to see the following message when autoloading is being triggered when adding nlmon device: Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-nlmon instead. This false-positive happens despite with having correct capabilities set, e.g. through issuing `ip link del dev nlmon` more than once on a valid device with name nlmon, but Marcel has also seen it on creation time when no nlmon module is previously compiled-in or loaded as module and the device name equals a link type name (e.g. nlmon, vxlan, team). Stephen says: The netdev module alias is a hold over from the past. For normal devices, people used to create a alias eth0 to and point it to the type of network device used, that was back in the bad old ISA days before real discovery. Also, the tunnels create module alias for the control device and ip used to use this to autoload the tunnel device. The message is bogus and should just be removed, I also see it in a couple of other cases where tap devices are renamed for other usese. As mentioned in 8909c9ad ("net: don't allow CAP_NET_ADMIN to load non-netdev kernel modules"), we nevertheless still might want to leave the old autoloading behaviour in place as it could break old scripts, so for now, lets just remove the log message as Stephen suggests. Reference: http://thread.gmane.org/gmane.linux.kernel/1105168Reported-by: Marcel Holtmann <marcel@holtmann.org> Suggested-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9b ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
When we bring the interface down, phy_stop() will schedule the PHY state machine to call our link adjustment callback. By the time we do so, we may have clock gated off the SYSTEMPORT hardware block, and this will cause bus errors to happen in bcm_sysport_adj_link(): Make sure that we only touch the UMAC_CMD register when there is an actual link. This is safe to do for two reasons: - updating the Ethernet MAC registers only make sense when a physical link is present - the PHY library state machine first set phydev->link = 0 before invoking phydev->adjust_link in the PHY_HALTED case This is a similar fix to the GENET one: c677ba8b ("net: bcmgenet: update UMAC_CMD only when link is detected"). Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
As in IPv6 people might increase the igmp query robustness variable to make sure unsolicited state change reports aren't lost on the network. Add and document this new knob to igmp code. RFCs allow tuning this parameter back to first IGMP RFC, so we also use this setting for all counters, including source specific multicast. Also take over sysctl value when upping the interface and don't reuse the last one seen on the interface. Cc: Flavio Leitner <fbl@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
This patch adds a new sysctl_mld_qrv knob to configure the mldv1/v2 query robustness variable. It specifies how many retransmit of unsolicited mld retransmit should happen. Admins might want to tune this on lossy links. Also reset mld state on interface down/up, so we pick up new sysctl settings during interface up event. IPv6 certification requests this knob to be available. I didn't make this knob netns specific, as it is mostly a setting in a physical environment and should be per host. Cc: Flavio Leitner <fbl@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Sep, 2014 14 commits
-
-
Jacob Keller authored
Hardware has a limited number of pools available (64). Previously, no checks were in place to limit the number of accelerated macvlan devices based on the number of pools. Normally this would be ok, because there was already a limit for these well below the number of available pools. However, SR-IOV uses the very same pools. Therefor, we need to ensure that the total number of pools (number of VFs plus the number of non-VF pools in use for accelerated macvlans) does not exceed the number of pools available in hardware. This patch resolves a kernel NULL pointer dereference caused by the following commands: $modprobe ixgbe max_vfs=63 $ethtool -K eth2 l2-fwd-offload on $ip link add link eth2 macvlan0 type macvlan $ip link set dev macvlan0 up [ 992.950080] BUG: unable to handle kernel NULL pointer dereference at 0000000000000056 [ 992.951109] IP: [<ffffffffa003b71e>] ixgbe_disable_fwd_ring+0x1e/0xf0 [ixgbe] [ 992.951684] PGD 22a80e067 PUD 232e9b067 PMD 0 [ 992.952389] Oops: 0000 [#1] SMP [ 992.953014] Modules linked in: nfsd lockd nfs_acl exportfs auth_rpcgss oid_registry sunrpc bridge stp llc vhost_net macvtap macvlan vhost tun kvm_intel kvm ioatdma ixgbe mdio igb dca [ 992.956042] CPU: 2 PID: 11928 Comm: ifconfig Not tainted 3.16.0-rc6-net-next-07-29-2014-FCoE+ #1 [ 992.956915] Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.03.0003.041920141333 04/19/2014 [ 992.957791] task: ffff8804341c0000 ti: ffff8801d7dc8000 task.ti: ffff8801d7dc8000 [ 992.958660] RIP: 0010:[<ffffffffa003b71e>] [<ffffffffa003b71e>] ixgbe_disable_fwd_ring+0x1e/0xf0 [ixgbe] [ 992.959613] RSP: 0018:ffff8801d7dcbbb8 EFLAGS: 00010286 [ 992.960093] RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000001 [ 992.960575] RDX: ffff880232eb7000 RSI: 0000000000000000 RDI: ffff88022dc05800 [ 992.961059] RBP: ffff8801d7dcbbd8 R08: 0000000000000000 R09: 0000000000000000 [ 992.961541] R10: 0000000000000001 R11: 0000000000000000 R12: ffff88022ec20980 [ 992.962023] R13: ffff880232eb7000 R14: 0000000000000001 R15: 0000000000000001 [ 992.962508] FS: 00007fab264887a0(0000) GS:ffff880237640000(0000) knlGS:0000000000000000 [ 992.963378] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 992.963858] CR2: 0000000000000056 CR3: 000000022a939000 CR4: 00000000001427e0 [ 992.964340] Stack: [ 992.964806] ffff88022ec28840 ffff88022ec20980 ffff88022dc05800 ffff880232eb7000 [ 992.965976] ffff8801d7dcbc28 ffffffffa003bae8 ffff8801d7dcbbe8 0000000000000400 [ 992.967147] 000000000000000d ffff88022ec20980 ffff88022ec20000 ffff88022dc05800 [ 992.968319] Call Trace: [ 992.968795] [<ffffffffa003bae8>] ixgbe_fwd_ring_up+0x88/0x280 [ixgbe] [ 992.969284] [<ffffffffa0041d83>] ixgbe_fwd_add+0x173/0x220 [ixgbe] [ 992.969767] [<ffffffffa015056c>] macvlan_open+0x1bc/0x230 [macvlan] [ 992.970256] [<ffffffff816b8de7>] __dev_open+0xd7/0x150 [ 992.970735] [<ffffffff816b8bd7>] __dev_change_flags+0xa7/0x170 [ 992.971220] [<ffffffff816b8ccb>] dev_change_flags+0x2b/0x70 [ 992.971703] [<ffffffff817471b2>] devinet_ioctl+0x602/0x6d0 [ 992.972184] [<ffffffff81748168>] inet_ioctl+0x78/0x90 [ 992.972666] [<ffffffff816a143b>] sock_do_ioctl+0x2b/0x70 [ 992.973146] [<ffffffff816a14ed>] sock_ioctl+0x6d/0x260 [ 992.973627] [<ffffffff811ad3b4>] do_vfs_ioctl+0x84/0x540 [ 992.974109] [<ffffffff811a4c81>] ? final_putname+0x21/0x50 [ 992.974593] [<ffffffff818725d5>] ? sysret_check+0x22/0x5d [ 992.975073] [<ffffffff811ad901>] SyS_ioctl+0x91/0xa0 [ 992.975550] [<ffffffff818725a9>] system_call_fastpath+0x16/0x1b [ 992.976026] Code: ff 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 20 48 89 5d e8 4c 89 65 f0 48 89 f3 4c 89 6d f8 4c 8b a7 08 02 00 00 <44> 0f b6 6e 56 44 03 af 14 02 00 00 4c 89 e7 e8 5e f2 ff ff be [ 992.982261] RIP [<ffffffffa003b71e>] ixgbe_disable_fwd_ring+0x1e/0xf0 [ixgbe] [ 992.983212] RSP <ffff8801d7dcbbb8> [ 992.983681] CR2: 0000000000000056 [ 992.984248] ---[ end trace 9f54802b5cc3638b ]--- Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Since we previously called ixgbe_set_num_queues just prior to attempting to set our interrupt scheme, it may be non obvious why we have to call it again inside the function. Add a comment which helps make it more obvious that we are resetting features based on the fact that we do not have MSI-X enabled, and cannot use the previous settings. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
VFLINKS.LINKUP bit tends to flap when a DA or SFP+ cable is disconnected. It can take up to 500 usecs for the LINKUP bit to be correct. This patch resolves the issue by introducing a delay for 82599 VFs of at least 500 usecs to make sure the VFLINKS value is correct. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
ixgbe initiates a reset of the interface on link loss with pending Tx work in order to clear the rings. This patch extends the pending Tx work check to the VF interfaces with the same purpose. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change makes it so that the behavior for FDB handling is consistent between both the SR-IOV and non-SR-IOV cases. The main change here is that we perform bounds checking on the number of SR-IOV addresses regardless of if SR-IOV is enabled or not as we can only support a certain number of addresses in the hardware. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Ethan Zhao authored
There is global funcion pci_vfs_assigned(), so use it instead of composing local one. Signed-off-by: Ethan Zhao <ethan.kernel@gmail.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Catherine Sullivan authored
Bump i40e version to 1.0.11 and i40evf version to 1.0.5. Change-ID: I63a60fa2efe82aae87a8a3095f43218db57d46ce Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com>
-
Jesse Brandeburg authored
This fixes the panic under traffic load when resetting. This issue could also show up if/whenever there is a Tx-timeout. Change-ID: Ie393a1f17fd5d962e56fc3bfe784899ef25402f5 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai Jain authored
We shouldn't restart Admin queue subtask if PF reset fails since we do not have the AQ setup at that point. This patch makes sure we disable AQ clean subtask when PF reset fails. This will resolve an occasional kernel panic when PF reset fails for some reason. Change-ID: I11a747773362a8c5c0ad7a10cd34be0bda8eb9e8 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jesse Brandeburg authored
The driver is un-necessarily printing a warning that is only marginally useful to the user. Make the warning only print if extended driver string printing is enabled, other messages related to a reset event will still continue to print. Change-ID: I5e8beca6516a2f176cd2e72b0ac2b3b909e6c953 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Catherine Sullivan authored
Since we don't seem to be getting an LSE telling us link is going down during set_phy_config (but we do get an LSE telling us we are coming back up), fake one for the OS and tell them link is going down. Also do an atomic restart no matter what because there are times the user may want to end with link up even if they started with link down (like if they accidentally set it to a speed that can't link and are trying to fix it). Change-ID: I0a642af9c1d0feb67bce741aba1a9c33bd349ed6 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Serey Kong authored
Remove unnecessary setting of "ret" variable as it's already set at the top of the function. Change-ID: Icaccfc67f335817a23579b7c43625d59ad6c9925 Signed-off-by: Serey Kong <serey.kong@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Serey Kong authored
Change "spoofck" to "spoofchk" to be consistent with as defined in netdev. Change-ID: I9866d6284cb5f92c8d71dc0776c6d1e71dfb62a5 Signed-off-by: Serey Kong <serey.kong@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Catherine Sullivan authored
Allow the user to change auto-negotiation and speed settings if link is down. Change-ID: I372967c627682b5e1835f623a7cbf41b21b51043 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-