- 01 Feb, 2017 15 commits
-
-
Rafał Miłecki authored
This extra BCM54612E code in PHY driver isn't really aneg specific. Even without it aneg works OK but the problem is no packets pass through PHY. Moreover putting this code inside config_aneg callback didn't allow resuming PHY correctly. When driver called phy_stop and phy_start it was putting PHY machine into RESUMING state. After that machine was switching into AN and NOLINK without ever calling phy_start_aneg. This prevented this extra setup from being called and PHY didn't work. This change has been verified to fix network on BCM47186B0 SoC device with BCM54612E. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yotam Gigi says: ==================== net/sched: act_sample: Little fixes Little fixes in sample tc action. ==================== Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Yotam Gigi authored
The ASSERT_RTNL is not necessary in the init function, as it does not touch any rtnl protected structures, as opposed to the mirred action which does have to hold a net device. Reported-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Signed-off-by:
-
Yotam Gigi authored
Fix error path of in sample init, by releasing the tc hash in case of failure in psample_group creation. Fixes: 5c5670fa ("net/sched: Introduce sample tc action") Reported-by:
-
David S. Miller authored
Niklas Söderlund says: ==================== sh_eth: fixes for MagicPacket handling This series contain two fixes for MagicPacket handling. It's based on top of net-next and is tested on Koelsch. ==================== Signed-off-by: -
Niklas Söderlund authored
If a link change interrupt happens along side the MagicPacket interrupt and the link change interrupt is ignored the interrupt handler will return and the wakeup event is not registered. Fix this by moving the MagicPacket check before the link change check. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reported-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
-
Niklas Söderlund authored
To be consistent with the rest of the driver when setting bits using sh_eth_modify() the same bit should also be cleared. This have no functional change and should have been done from the start. Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2017-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.11 It's nice to see rt2x00 development has becoming active, for example adding support for a new chip version. Also wcn36xx has been converted to use the recently merged QCOM_SMD subsystem. Otherwise new features and fixes it lots of drivers. Major changes: iwlwifi * some more work in preparation for A000 family support * add support for radiotap timestamps * some work on our firmware debugging capabilities wcn36xx * convert to a proper QCOM_SMD driver (from the platform_driver interface) ath10k * VHT160 support * dump Copy Engine registers during firmware crash * search board file extension from SMBIOS wil6210 * add disable_ap_sme module parameter rt2x00 * support RT3352 with external PA * support for RT3352 with 20MHz crystal * add support for RT5350 WiSoC brcmfmac * add support for BCM43455 sdio device rtl8xxxu * add support for D-Link DWA-131 rev E1, TP-Link TL-WN822N v4 and others ==================== Signed-off-by:
-
Dan Carpenter authored
dma_mapping_error() returns 1 if there is an error and 0 if not. Fixes: 018423e9 ("net: ethernet: aquantia: Add ring support code") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Satanand Burla authored
Flush the mmio writes before releasing spin locks. if the maintained counts get too high > 2M force writeback of the counts to clear them Signed-off-by:
Satanand Burla <satananda.burla@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
-
David Ahern authored
IPv6 does not set the NLM_F_APPEND flag in notifications to signal that a NEWROUTE is an append versus a new route or a replaced one. Add the flag if the request has it. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Grygorii Strashko authored
In switch mode on struct cpsw_slave->ndev field will be initialized with proper value only for the one cpsw slave port, as result cpsw_get_usage_count() will generate "Unable to handle kernel NULL pointer dereference" exception when first ethernet interface is opening cpsw_ndo_open(). This issue causes boot regression on AM335x EVM and reproducible on am57xx-evm (switch mode). Fix it by adding additional check for !cpsw->slaves[i].ndev in cpsw_get_usage_count(). Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Fixes: 03fd01ad ("net: ethernet: ti: cpsw: don't duplicate ndev_running") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
Eric Dumazet authored
Dmitry reported warnings occurring in __skb_gso_segment() [1] All SKB_GSO_DODGY producers can allow user space to feed packets that trigger the current check. We could prevent them from doing so, rejecting packets, but this might add regressions to existing programs. It turns out our SKB_GSO_DODGY handlers properly set up checksum information that is needed anyway when packets needs to be segmented. By checking again skb_needs_check() after skb_mac_gso_segment(), we should remove these pesky warnings, at a very minor cost. With help from Willem de Bruijn [1] WARNING: CPU: 1 PID: 6768 at net/core/dev.c:2439 skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434 lo: caps=(0x000000a2803b7c69, 0x0000000000000000) len=138 data_len=0 gso_size=15883 gso_type=4 ip_summed=0 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 6768 Comm: syz-executor1 Not tainted 4.9.0 #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ffff8801c063ecd8 ffffffff82346bdf ffffffff00000001 1ffff100380c7d2e ffffed00380c7d26 0000000041b58ab3 ffffffff84b37e38 ffffffff823468f1 ffffffff84820740 ffffffff84f289c0 dffffc0000000000 ffff8801c063ee20 Call Trace: [<ffffffff82346bdf>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff82346bdf>] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 [<ffffffff81827e34>] panic+0x1fb/0x412 kernel/panic.c:179 [<ffffffff8141f704>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff8141f7e5>] warn_slowpath_fmt+0xc5/0x100 kernel/panic.c:565 [<ffffffff8356cbaf>] skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434 [<ffffffff83585cd2>] __skb_gso_segment+0x482/0x780 net/core/dev.c:2706 [<ffffffff83586f19>] skb_gso_segment include/linux/netdevice.h:3985 [inline] [<ffffffff83586f19>] validate_xmit_skb+0x5c9/0xc20 net/core/dev.c:2969 [<ffffffff835892bb>] __dev_queue_xmit+0xe6b/0x1e70 net/core/dev.c:3383 [<ffffffff8358a2d7>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3424 [<ffffffff83ad161d>] packet_snd net/packet/af_packet.c:2930 [inline] [<ffffffff83ad161d>] packet_sendmsg+0x32ed/0x4d30 net/packet/af_packet.c:2955 [<ffffffff834f0aaa>] sock_sendmsg_nosec net/socket.c:621 [inline] [<ffffffff834f0aaa>] sock_sendmsg+0xca/0x110 net/socket.c:631 [<ffffffff834f329a>] ___sys_sendmsg+0x8fa/0x9f0 net/socket.c:1954 [<ffffffff834f5e58>] __sys_sendmsg+0x138/0x300 net/socket.c:1988 [<ffffffff834f604d>] SYSC_sendmsg net/socket.c:1999 [inline] [<ffffffff834f604d>] SyS_sendmsg+0x2d/0x50 net/socket.c:1995 [<ffffffff84371941>] entry_SYSCALL_64_fastpath+0x1f/0xc2 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Theuns Verwoerd authored
Allow a master interface to be specified as one of the parameters when creating a new interface via rtnl_newlink. Previously this would require invoking interface creation, waiting for it to complete, and then separately binding that new interface to a master. In particular, this is used when creating a macvlan child interface for VRRP in a VRF configuration, allowing the interface creator to specify directly what master interface should be inherited by the child, without having to deal with asynchronous complications and potential race conditions. Signed-off-by:
Theuns Verwoerd <theuns.verwoerd@alliedtelesis.co.nz> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-02-01 1) Some typo fixes, from Alexander Alemayhu. 2) Don't acquire state lock in get_mtu functions. The only rece against a dead state does not matter. From Florian Westphal. 3) Remove xfrm4_state_fini, it is unused for more than 10 years. From Florian Westphal. 4) Various rcu usage improvements. From Florian Westphal. 5) Properly handle crypto arrors in ah4/ah6. From Gilad Ben-Yossef. 6) Try to avoid skb linearization in esp4 and esp6. 7) The esp trailer is now set up in different places, add a helper for this. 8) With the upcomming usage of gro_cells in IPsec, a gro merged skb can have a secpath. Drop it before freeing or reusing the skb. 9) Add a xfrm dummy network device for napi. With this we can use gro_cells from within xfrm, it allows IPsec GRO without impact on the generic networking code. Please pull or let me know if there are problems. ==================== Signed-off-by:
-
- 31 Jan, 2017 23 commits
-
-
David S. Miller authored
Rafał Miłecki says: ==================== net-next: use one struct bgmac & add PHY support This patchset adds support for initializing PHY using PHY subsystem. It's required e.g. for wireless access point devices that use bgmac supported Ethernet device connected to some external PHY. Implementing this required accessing phydev in bcma specific code which wasn't possible with core code allocating struct bgmac on its own. This is why I needed to modify alloc_etherdev usage first. ==================== Signed-off-by: -
Rafał Miłecki authored
This adds support for using bgmac with PHYs supported by standalone PHY drivers. Having any PHY initialization in bgmac is hacky and shouldn't be extended but rather removed if anyone has hardware to test it. Signed-off-by:
-
Rafał Miłecki authored
Adding struct bcma_mdio was a workaround for bcma code not having access to the struct bgmac used in the core code. Now we don't duplicate this struct we can just use it internally in bcma code. This simplifies code & allows access to all bgmac driver details from all places in bcma code. Signed-off-by:
-
Rafał Miłecki authored
So far were were allocating struct bgmac in 3 places: platform code, bcma code and shared bgmac_enet_probe function. The reason for this was bgmac_enet_probe: 1) Requiring early-filled struct bgmac 2) Calling alloc_etherdev on its own in order to use netdev_priv later This solution got few drawbacks: 1) Was duplicating allocating code 2) Required copying early-filled struct 3) Resulted in platform/bcma code having access only to unused struct Solve this situation by simply extracting some probe code into the new bgmac_alloc function. Signed-off-by:
-
Florian Fainelli authored
Commit 7318166c ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") added a new object to build: bcm_sf2_cfp.o, but in doing so, we essentially just built this object and no longer bcm_sf2.o. Fix this by creating a module named bcm-sf2.ko which links in bcm_sf2.o and bcm_sf2_cfp.o. Fixes: 7318166c ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") Signed-off-by:
-
Ganesh Goudar authored
Change t4fw_version.h to update latest firmware version number 1.16.26.0. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Alexei Starovoitov authored
under memory pressure 'ethtool -S' command may warn: [ 2374.385195] ethtool: page allocation failure: order:4, mode:0x242c0c0 [ 2374.405573] CPU: 12 PID: 40211 Comm: ethtool Not tainted [ 2374.423071] Call Trace: [ 2374.423076] [<ffffffff8148cb29>] dump_stack+0x4d/0x64 [ 2374.423080] [<ffffffff811667cb>] warn_alloc_failed+0xeb/0x150 [ 2374.423082] [<ffffffff81169cd3>] ? __alloc_pages_direct_compact+0x43/0xf0 [ 2374.423084] [<ffffffff8116a25c>] __alloc_pages_nodemask+0x4dc/0xbf0 [ 2374.423091] [<ffffffffa0023dc2>] ? cmd_exec+0x722/0xcd0 [mlx5_core] [ 2374.423095] [<ffffffff811b3dcc>] alloc_pages_current+0x8c/0x110 [ 2374.423097] [<ffffffff81168859>] alloc_kmem_pages+0x19/0x90 [ 2374.423099] [<ffffffff81186e5e>] kmalloc_order_trace+0x2e/0xe0 [ 2374.423101] [<ffffffff811c0084>] __kmalloc+0x204/0x220 [ 2374.423105] [<ffffffff816c269e>] dev_ethtool+0xe4e/0x1f80 [ 2374.423106] [<ffffffff816b967e>] ? dev_get_by_name_rcu+0x5e/0x80 [ 2374.423108] [<ffffffff816d6926>] dev_ioctl+0x156/0x560 [ 2374.423111] [<ffffffff811d4c68>] ? mem_cgroup_commit_charge+0x78/0x3c0 [ 2374.423117] [<ffffffff8169d542>] sock_do_ioctl+0x42/0x50 [ 2374.423119] [<ffffffff8169d9c3>] sock_ioctl+0x1b3/0x250 [ 2374.423121] [<ffffffff811f0f42>] do_vfs_ioctl+0x92/0x580 [ 2374.423123] [<ffffffff8100222b>] ? do_audit_syscall_entry+0x4b/0x70 [ 2374.423124] [<ffffffff8100287c>] ? syscall_trace_enter_phase1+0xfc/0x120 [ 2374.423126] [<ffffffff811f14a9>] SyS_ioctl+0x79/0x90 [ 2374.423127] [<ffffffff81002bb0>] do_syscall_64+0x50/0xa0 [ 2374.423129] [<ffffffff817e19bc>] entry_SYSCALL64_slow_path+0x25/0x25 ~1160 mlx5 counters ~= order 4 allocation which is unlikely to succeed under memory pressure. Convert them to vzalloc() as ethtool_get_regs() does. Also take care of drivers without counters similar to commit 67ae7cf1 ("ethtool: Allow zero-length register dumps again") and reduce warn_on to warn_on_once. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Tested-by:
Pavel Belous <pavel.s.belous@gmail.com> Signed-off-by:
-
Colin Ian King authored
encap_type should be checked to see if it is greater or equal to the size of array map to fix an off-by-one array size check. This fixes an array overrun read as detected by static analysis by CoverityScan, CID#1398883 ("Out-of-bounds-read") Fixes: 9b410801 ("sfc: insert catch-all filters for encapsulated traffic") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for 4.11. Major changes: wcn36xx * convert to a proper QCOM_SMD driver (from the platform_driver interface) ath10k * VHT160 support * dump Copy Engine registers during firmware crash * search board file extension from SMBIOS wil6210 * add disable_ap_sme module parameter
-
Rafał Miłecki authored
OF allows not only specifying platform devices but also describing devices on standard buses like PCI or USB. This change will allow reading info from DT for bcma buses hosted on PCI cards. Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Stanislaw Gruszka authored
When we restart system using sysrq RT3290 device do not initalize properly, hance always enable it via WLAN_FUN_CTRL register on probe. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=85461Reported-and-tested-by:
Giedrius Statkevičius <edrius.statkevicius@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Rafał Miłecki authored
This allows tracking device state and e.g. makes devm work as expected. Signed-off-by:
-
Arend Van Spriel authored
Add support for the .update_connect_params() callback for roaming or subsequent (re)association. Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Arend Van Spriel authored
The wowlan support is (partially) determined dynamic by checking the device/firmware capabilities. So they can differ per device. So it is not possible to use a static global. Instead use the global as a template and use kmemdup(). When kmemdup() fails the template is used unmodified. Reviewed-by:
-
Arend Van Spriel authored
For wowl netdetect the event data changed for newer chips. This was recently fixed for scheduled scan, but same change is needed for wowl netdetect. Removing now pointles += operation from both result handlers. Reviewed-by:
-
Arend Van Spriel authored
The driver advertises support for WOWLAN_NETDETECT but did not specify maximum amount of netdetect match sets. This was no issue due to a bug in nl80211. As that has been fixed, brcmfmac also needs fixing. Reviewed-by:
-
Sara Sharon authored
For old firmwares the memory wasn't allocated, resulting in panic. Make it dynamically allocated as well. Allow any order of functions call. Fixes: eef187a7 ("iwlwifi: enlarge number of ucode sections") Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Tested-by:
-
Stanislaw Gruszka authored
clk_get() takes two arguments and might return ERR_PTR(), so we have to nullify pointer on that case, to do not break further call to clk_get_rate(). Reported-by:
Felix Fietkau <nbd@nbd.name> Fixes: 34db70b9 ("rt2x00: add copy of clk for soc devices") Signed-off-by:
-
David S. Miller authored
Sergei Shtylyov says: ==================== sh_eth: E-DMAC interrupt mask cleanups Here's a set of 3 patches against DaveM's 'net-next.git' repo. The main goal of this set is to stop using the bare numbers for the E-DMAC interrupt masks. [1/3] sh_eth: rename EESIPR bits [2/3] sh_eth: add missing EESIPR bits [3/3] sh_eth: stop using bare numbers for EESIPR values ==================== Signed-off-by: -
Sergei Shtylyov authored
Now that we have almost all EESIPR bits declared (and those that are still not are most probably reserved anyway) we can at last replace the bare numbers used for 'sh_eth_cpu_data::eesipr_value' initializers with the bit names ORed together... Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Sergei Shtylyov authored
Renesas SH77{34|63} manuals describe more EESIPR bits than the current driver. Declare the new bits with the end goal of using the bit names instead of the bare numbers for the 'sh_eth_cpu_data::eesipr_value' initializers... Signed-off-by: -
Sergei Shtylyov authored
Since the commit b0ca2a21 ("sh_eth: Add support of SH7763 to sh_eth") the *enum* declaring the EESIPR bits (interrupt mask) went out of sync with the *enum* declaring the EESR bits (interrupt status) WRT bit naming and formatting. I'd like to restore the consistency by using EESIPR as the bit name prefix, renaming the *enum* to EESIPR_BIT, and (finally) renaming the bits according to the available Renesas SH77{34|63} manuals; additionally, reconstruct couple names using the EESR bit declaration above... Signed-off-by:
-
- 30 Jan, 2017 2 commits
-
-
David S. Miller authored
Gregory CLEMENT says: ==================== dsa: Add support for the ethernet switch on the ESPRESSObin This set of patches adds support for the Marvell Ethernet Topaz switch family (88E6141/88E6341) which is found on the ESPRESSObin. With this series the network is usable on this board. As usual, I rebased the series on the very last net-next/master. In this series there is no temperature support which need some patches form Andrew Lunn. As soon as Andrew Lunn will post the needed patch I will send a patch to enable the temperature support. Changelog: v6 -> v7: - rebased on net-next/master (5b8784aa) - Fixed the wrong age time coeff from 15s to 3.75s. - Remove support for temperature sensor v5 -> v6: - rebased on net-next/master (d140199a) - Fix the redundant check on mv88e6xxx_6341_family (reported by Julia Lawall) - Add support for the 88E6141 - Move support for temperature sensor in the phy part ==================== Signed-off-by:
-
Gregory CLEMENT authored
The Marvell 88E6341 device is single-chip, 6-port Ethernet switch with four integrated 10/100/1000Mbps Ethernet transceivers and one high speed SerDes interfaces. It belongs to the Topaz family and unlike the 88E6341 it does not have a TCAM. Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
