- 06 Feb, 2017 7 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2017-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.10 Only one important fix for rtlwifi which fixes a regression introduced in 4.9 and which caused problems for many users. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2017-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A few simple fixes: * fix FILS AEAD cipher usage to use the correct AAD vectors and to use synchronous algorithms * fix using mesh HT operation data from userspace * fix adding mesh vendor elements to beacons & plink frames ==================== Signed-off-by:
-
Eric Dumazet authored
Dmitry reported use-after-free in ip6_datagram_recv_specific_ctl() A similar bug was fixed in commit 8ce48623 ("ipv6: tcp: restore IP6CB for pktoptions skbs"), but I missed another spot. tcp_v6_syn_recv_sock() can indeed set np->pktoptions from ireq->pktopts Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Masashi Honma authored
A previous change to fix checks for NL80211_MESHCONF_HT_OPMODE missed setting the flag when replacing FILL_IN_MESH_PARAM_IF_SET with checking codes. This results in dropping the received HT operation value when called by nl80211_update_mesh_config(). Fix this by setting the flag properly. Fixes: 9757235f ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") Signed-off-by:
Masashi Honma <masashi.honma@gmail.com> [rewrite commit message to use Fixes: line] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Thorsten Horstmann authored
The function ieee80211_ie_split_vendor doesn't return 0 on errors. Instead it returns any offset < ielen when WLAN_EID_VENDOR_SPECIFIC is found. The return value in mesh_add_vendor_ies must therefore be checked against ifmsh->ie_len and not 0. Otherwise all ifmsh->ie starting with WLAN_EID_VENDOR_SPECIFIC will be rejected. Fixes: 082ebb0c ("mac80211: fix mesh beacon format") Signed-off-by:
Thorsten Horstmann <thorsten@defutech.de> Signed-off-by:
Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> [sven@narfation.org: Add commit message] Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
-
Jouni Malinen authored
The skcipher could have been of the async variant which may return from skcipher_encrypt() with -EINPROGRESS after having queued the request. The FILS AEAD implementation here does not have code for dealing with that possibility, so allocate a sync cipher explicitly to avoid potential issues with hardware accelerators. This is based on the patch sent out by Ard. Fixes: 39404fee ("mac80211: FILS AEAD protection for station mode association frames") Reported-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
-
Jouni Malinen authored
Incorrect num_elem parameter value (1 vs. 5) was used in the aes_siv_encrypt() call. This resulted in only the first one of the five AAD vectors to SIV getting included in calculation. This does not protect all the contents correctly and would not interoperate with a standard compliant implementation. Fix this by using the correct number. A matching fix is needed in the AP side (hostapd) to get FILS authentication working properly. Fixes: 39404fee ("mac80211: FILS AEAD protection for station mode association frames") Reported-by:
-
- 05 Feb, 2017 3 commits
-
-
Eric Dumazet authored
Andrey Konovalov reported out of bound accesses in ip6gre_err() If GRE flags contains GRE_KEY, the following expression *(((__be32 *)p) + (grehlen / 4) - 1) accesses data ~40 bytes after the expected point, since grehlen includes the size of IPv6 headers. Let's use a "struct gre_base_hdr *greh" pointer to make this code more readable. p[1] becomes greh->protocol. grhlen is the GRE header length. Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Eric Dumazet authored
syzkaller found another out of bound access in ip_options_compile(), or more exactly in cipso_v4_validate() Fixes: 20e2a864 ("cipso: handle CIPSO options correctly when NetLabel is disabled") Fixes: 446fda4f ("[NetLabel]: CIPSOv4 engine") Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Eric Dumazet authored
Andrey Konovalov got crashes in __ip_options_echo() when a NULL skb->dst is accessed. ipv4_pktinfo_prepare() should not drop the dst if (evil) IP options are present. We could refine the test to the presence of ts_needtime or srr, but IP options are not often used, so let's be conservative. Thanks to syzkaller team for finding this bug. Fixes: d826eb14 ("ipv4: PKTINFO doesnt need dst reference") Signed-off-by:
-
- 03 Feb, 2017 7 commits
-
-
Eric Dumazet authored
Dmitry reported a warning [1] showing that we were calling net_disable_timestamp() -> static_key_slow_dec() from a non process context. Grabbing a mutex while holding a spinlock or rcu_read_lock() is not allowed. As Cong suggested, we now use a work queue. It is possible netstamp_clear() exits while netstamp_needed_deferred is not zero, but it is probably not worth trying to do better than that. netstamp_needed_deferred atomic tracks the exact number of deferred decrements. [1] [ INFO: suspicious RCU usage. ] 4.10.0-rc5+ #192 Not tainted ------------------------------- ./include/linux/rcupdate.h:561 Illegal context switch in RCU read-side critical section! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 0 2 locks held by syz-executor14/23111: #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83a35c35>] lock_sock include/net/sock.h:1454 [inline] #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83a35c35>] rawv6_sendmsg+0x1e65/0x3ec0 net/ipv6/raw.c:919 #1: (rcu_read_lock){......}, at: [<ffffffff83ae2678>] nf_hook include/linux/netfilter.h:201 [inline] #1: (rcu_read_lock){......}, at: [<ffffffff83ae2678>] __ip6_local_out+0x258/0x840 net/ipv6/output_core.c:160 stack backtrace: CPU: 2 PID: 23111 Comm: syz-executor14 Not tainted 4.10.0-rc5+ #192 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4452 rcu_preempt_sleep_check include/linux/rcupdate.h:560 [inline] ___might_sleep+0x560/0x650 kernel/sched/core.c:7748 __might_sleep+0x95/0x1a0 kernel/sched/core.c:7739 mutex_lock_nested+0x24f/0x1730 kernel/locking/mutex.c:752 atomic_dec_and_mutex_lock+0x119/0x160 kernel/locking/mutex.c:1060 __static_key_slow_dec+0x7a/0x1e0 kernel/jump_label.c:149 static_key_slow_dec+0x51/0x90 kernel/jump_label.c:174 net_disable_timestamp+0x3b/0x50 net/core/dev.c:1728 sock_disable_timestamp+0x98/0xc0 net/core/sock.c:403 __sk_destruct+0x27d/0x6b0 net/core/sock.c:1441 sk_destruct+0x47/0x80 net/core/sock.c:1460 __sk_free+0x57/0x230 net/core/sock.c:1468 sock_wfree+0xae/0x120 net/core/sock.c:1645 skb_release_head_state+0xfc/0x200 net/core/skbuff.c:655 skb_release_all+0x15/0x60 net/core/skbuff.c:668 __kfree_skb+0x15/0x20 net/core/skbuff.c:684 kfree_skb+0x16e/0x4c0 net/core/skbuff.c:705 inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304 inet_frag_put include/net/inet_frag.h:133 [inline] nf_ct_frag6_gather+0x1106/0x3840 net/ipv6/netfilter/nf_conntrack_reasm.c:617 ipv6_defrag+0x1be/0x2b0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68 nf_hook_entry_hookfn include/linux/netfilter.h:102 [inline] nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310 nf_hook include/linux/netfilter.h:212 [inline] __ip6_local_out+0x489/0x840 net/ipv6/output_core.c:160 ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170 ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722 ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742 rawv6_push_pending_frames net/ipv6/raw.c:613 [inline] rawv6_sendmsg+0x2d1a/0x3ec0 net/ipv6/raw.c:927 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744 sock_sendmsg_nosec net/socket.c:635 [inline] sock_sendmsg+0xca/0x110 net/socket.c:645 sock_write_iter+0x326/0x600 net/socket.c:848 do_iter_readv_writev+0x2e3/0x5b0 fs/read_write.c:695 do_readv_writev+0x42c/0x9b0 fs/read_write.c:872 vfs_writev+0x87/0xc0 fs/read_write.c:911 do_writev+0x110/0x2c0 fs/read_write.c:944 SYSC_writev fs/read_write.c:1017 [inline] SyS_writev+0x27/0x30 fs/read_write.c:1014 entry_SYSCALL_64_fastpath+0x1f/0xc2 RIP: 0033:0x445559 RSP: 002b:00007f6f46fceb58 EFLAGS: 00000292 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000445559 RDX: 0000000000000001 RSI: 0000000020f1eff0 RDI: 0000000000000005 RBP: 00000000006e19c0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 0000000000700000 R13: 0000000020f59000 R14: 0000000000000015 R15: 0000000000020400 BUG: sleeping function called from invalid context at kernel/locking/mutex.c:752 in_atomic(): 1, irqs_disabled(): 0, pid: 23111, name: syz-executor14 INFO: lockdep is turned off. CPU: 2 PID: 23111 Comm: syz-executor14 Not tainted 4.10.0-rc5+ #192 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 ___might_sleep+0x47e/0x650 kernel/sched/core.c:7780 __might_sleep+0x95/0x1a0 kernel/sched/core.c:7739 mutex_lock_nested+0x24f/0x1730 kernel/locking/mutex.c:752 atomic_dec_and_mutex_lock+0x119/0x160 kernel/locking/mutex.c:1060 __static_key_slow_dec+0x7a/0x1e0 kernel/jump_label.c:149 static_key_slow_dec+0x51/0x90 kernel/jump_label.c:174 net_disable_timestamp+0x3b/0x50 net/core/dev.c:1728 sock_disable_timestamp+0x98/0xc0 net/core/sock.c:403 __sk_destruct+0x27d/0x6b0 net/core/sock.c:1441 sk_destruct+0x47/0x80 net/core/sock.c:1460 __sk_free+0x57/0x230 net/core/sock.c:1468 sock_wfree+0xae/0x120 net/core/sock.c:1645 skb_release_head_state+0xfc/0x200 net/core/skbuff.c:655 skb_release_all+0x15/0x60 net/core/skbuff.c:668 __kfree_skb+0x15/0x20 net/core/skbuff.c:684 kfree_skb+0x16e/0x4c0 net/core/skbuff.c:705 inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304 inet_frag_put include/net/inet_frag.h:133 [inline] nf_ct_frag6_gather+0x1106/0x3840 net/ipv6/netfilter/nf_conntrack_reasm.c:617 ipv6_defrag+0x1be/0x2b0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68 nf_hook_entry_hookfn include/linux/netfilter.h:102 [inline] nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310 nf_hook include/linux/netfilter.h:212 [inline] __ip6_local_out+0x489/0x840 net/ipv6/output_core.c:160 ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170 ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722 ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742 rawv6_push_pending_frames net/ipv6/raw.c:613 [inline] rawv6_sendmsg+0x2d1a/0x3ec0 net/ipv6/raw.c:927 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744 sock_sendmsg_nosec net/socket.c:635 [inline] sock_sendmsg+0xca/0x110 net/socket.c:645 sock_write_iter+0x326/0x600 net/socket.c:848 do_iter_readv_writev+0x2e3/0x5b0 fs/read_write.c:695 do_readv_writev+0x42c/0x9b0 fs/read_write.c:872 vfs_writev+0x87/0xc0 fs/read_write.c:911 do_writev+0x110/0x2c0 fs/read_write.c:944 SYSC_writev fs/read_write.c:1017 [inline] SyS_writev+0x27/0x30 fs/read_write.c:1014 entry_SYSCALL_64_fastpath+0x1f/0xc2 RIP: 0033:0x445559 Fixes: b90e5794 ("net: dont call jump_label_dec from irq context") Suggested-by:Cong Wang <xiyou.wangcong@gmail.com> Reported-by:
-
Stanislaw Gruszka authored
If ->get_regs_len() callback return 0, we allocate 0 bytes of memory, what print ugly warning in dmesg, which can be found further below. This happen on mac80211 devices where ieee80211_get_regs_len() just return 0 and driver only fills ethtool_regs structure and actually do not provide any dump. However I assume this can happen on other drivers i.e. when for some devices driver provide regs dump and for others do not. Hence preventing to to print warning in ethtool code seems to be reasonable. ethtool: vmalloc: allocation failure: 0 bytes, mode:0x24080c2(GFP_KERNEL|__GFP_HIGHMEM|__GFP_ZERO) <snip> Call Trace: [<ffffffff813bde47>] dump_stack+0x63/0x8c [<ffffffff811b0a1f>] warn_alloc+0x13f/0x170 [<ffffffff811f0476>] __vmalloc_node_range+0x1e6/0x2c0 [<ffffffff811f0874>] vzalloc+0x54/0x60 [<ffffffff8169986c>] dev_ethtool+0xb4c/0x1b30 [<ffffffff816adbb1>] dev_ioctl+0x181/0x520 [<ffffffff816714d2>] sock_do_ioctl+0x42/0x50 <snip> Mem-Info: active_anon:435809 inactive_anon:173951 isolated_anon:0 active_file:835822 inactive_file:196932 isolated_file:0 unevictable:0 dirty:8 writeback:0 unstable:0 slab_reclaimable:157732 slab_unreclaimable:10022 mapped:83042 shmem:306356 pagetables:9507 bounce:0 free:130041 free_pcp:1080 free_cma:0 Node 0 active_anon:1743236kB inactive_anon:695804kB active_file:3343288kB inactive_file:787728kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:332168kB dirty:32kB writeback:0kB shmem:0kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 1225424kB writeback_tmp:0kB unstable:0kB pages_scanned:0 all_unreclaimable? no Node 0 DMA free:15900kB min:136kB low:168kB high:200kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15984kB managed:15900kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 3187 7643 7643 Node 0 DMA32 free:419732kB min:28124kB low:35152kB high:42180kB active_anon:541180kB inactive_anon:248988kB active_file:1466388kB inactive_file:389632kB unevictable:0kB writepending:0kB present:3370280kB managed:3290932kB mlocked:0kB slab_reclaimable:217184kB slab_unreclaimable:4180kB kernel_stack:160kB pagetables:984kB bounce:0kB free_pcp:2236kB local_pcp:660kB free_cma:0kB lowmem_reserve[]: 0 0 4456 4456 Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
David Lebrun authored
In the latest version of the IPv6 Segment Routing IETF draft [1] the cleanup flag is removed and the flags field length is shrunk from 16 bits to 8 bits. As a consequence, the input of the HMAC computation is modified in a non-backward compatible way by covering the whole octet of flags instead of only the cleanup bit. As such, if an implementation compatible with the latest draft computes the HMAC of an SRH who has other flags set to 1, then the HMAC result would differ from the current implementation. This patch carries those modifications to prevent conflict with other implementations of IPv6 SR. [1] https://tools.ietf.org/html/draft-ietf-6man-segment-routing-header-05Signed-off-by:
David Lebrun <david.lebrun@uclouvain.be> Signed-off-by:
-
Mao Wenan authored
There is currently no reference count being held on the PHY driver, which makes it possible to remove the PHY driver module while the PHY state machine is running and polling the PHY. This could cause crashes similar to this one to show up: [ 43.361162] BUG: unable to handle kernel NULL pointer dereference at 0000000000000140 [ 43.361162] IP: phy_state_machine+0x32/0x490 [ 43.361162] PGD 59dc067 [ 43.361162] PUD 0 [ 43.361162] [ 43.361162] Oops: 0000 [#1] SMP [ 43.361162] Modules linked in: dsa_loop [last unloaded: broadcom] [ 43.361162] CPU: 0 PID: 1299 Comm: kworker/0:3 Not tainted 4.10.0-rc5+ #415 [ 43.361162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 43.361162] Workqueue: events_power_efficient phy_state_machine [ 43.361162] task: ffff880006782b80 task.stack: ffffc90000184000 [ 43.361162] RIP: 0010:phy_state_machine+0x32/0x490 [ 43.361162] RSP: 0018:ffffc90000187e18 EFLAGS: 00000246 [ 43.361162] RAX: 0000000000000000 RBX: ffff8800059e53c0 RCX: ffff880006a15c60 [ 43.361162] RDX: ffff880006782b80 RSI: 0000000000000000 RDI: ffff8800059e5428 [ 43.361162] RBP: ffffc90000187e48 R08: ffff880006a15c40 R09: 0000000000000000 [ 43.361162] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800059e5428 [ 43.361162] R13: ffff8800059e5000 R14: 0000000000000000 R15: ffff880006a15c40 [ 43.361162] FS: 0000000000000000(0000) GS:ffff880006a00000(0000) knlGS:0000000000000000 [ 43.361162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.361162] CR2: 0000000000000140 CR3: 0000000005979000 CR4: 00000000000006f0 [ 43.361162] Call Trace: [ 43.361162] process_one_work+0x1b4/0x3e0 [ 43.361162] worker_thread+0x43/0x4d0 [ 43.361162] ? __schedule+0x17f/0x4e0 [ 43.361162] kthread+0xf7/0x130 [ 43.361162] ? process_one_work+0x3e0/0x3e0 [ 43.361162] ? kthread_create_on_node+0x40/0x40 [ 43.361162] ret_from_fork+0x29/0x40 [ 43.361162] Code: 56 41 55 41 54 4c 8d 67 68 53 4c 8d af 40 fc ff ff 48 89 fb 4c 89 e7 48 83 ec 08 e8 c9 9d 27 00 48 8b 83 60 ff ff ff 44 8b 73 98 <48> 8b 90 40 01 00 00 44 89 f0 48 85 d2 74 08 4c 89 ef ff d2 8b Keep references on the PHY driver module right before we are going to utilize it in phy_attach_direct(), and conversely when we don't use it anymore in phy_detach(). Signed-off-by:
Mao Wenan <maowenan@huawei.com> [florian: rebase, rework commit message] Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Martin KaFai Lau says: ==================== mlx4: Misc bug fixes after reinitializing queues This patchset fixes misc bugs after reinitializing queues (e.g. by ethtool -L). v2: * Add another fix to mem leak in tx_ring[t] and tx_cq[t] * In mlx4_en_try_alloc_resources(), move all xdp_prog logic after calling mlx4_en_alloc_resources() ==================== Signed-off-by: -
Martin KaFai Lau authored
After calling mlx4_en_try_alloc_resources (e.g. by changing the number of rx-queues with ethtool -L), the existing xdp_prog becomes inactive. The bug is that the xdp_prog ptr has not been carried over from the old rx-queues to the new rx-queues Fixes: 47a38e15 ("net/mlx4_en: add support for fast rx drop bpf program") Cc: Brenden Blanco <bblanco@plumgrid.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Martin KaFai Lau authored
In mlx4_en_update_priv(), dst->tx_ring[t] and dst->tx_cq[t] are over-written by src->tx_ring[t] and src->tx_cq[t] without first calling kfree. One of the reproducible code paths is by doing 'ethtool -L'. The fix is to do the kfree in mlx4_en_free_resources(). Here is the kmemleak report: unreferenced object 0xffff880841211800 (size 2048): comm "ethtool", pid 3096, jiffies 4294716940 (age 528.353s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81930718>] kmemleak_alloc+0x28/0x50 [<ffffffff8120b213>] kmem_cache_alloc_trace+0x103/0x260 [<ffffffff8170e0a8>] mlx4_en_try_alloc_resources+0x118/0x1a0 [<ffffffff817065a9>] mlx4_en_set_ringparam+0x169/0x210 [<ffffffff818040c5>] dev_ethtool+0xae5/0x2190 [<ffffffff8181b898>] dev_ioctl+0x168/0x6f0 [<ffffffff817d7a72>] sock_do_ioctl+0x42/0x50 [<ffffffff817d819b>] sock_ioctl+0x21b/0x2d0 [<ffffffff81247a73>] do_vfs_ioctl+0x93/0x6a0 [<ffffffff812480f9>] SyS_ioctl+0x79/0x90 [<ffffffff8193d7ea>] entry_SYSCALL_64_fastpath+0x18/0xad [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff880841213000 (size 2048): comm "ethtool", pid 3096, jiffies 4294716940 (age 528.353s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81930718>] kmemleak_alloc+0x28/0x50 [<ffffffff8120b213>] kmem_cache_alloc_trace+0x103/0x260 [<ffffffff8170e0cb>] mlx4_en_try_alloc_resources+0x13b/0x1a0 [<ffffffff817065a9>] mlx4_en_set_ringparam+0x169/0x210 [<ffffffff818040c5>] dev_ethtool+0xae5/0x2190 [<ffffffff8181b898>] dev_ioctl+0x168/0x6f0 [<ffffffff817d7a72>] sock_do_ioctl+0x42/0x50 [<ffffffff817d819b>] sock_ioctl+0x21b/0x2d0 [<ffffffff81247a73>] do_vfs_ioctl+0x93/0x6a0 [<ffffffff812480f9>] SyS_ioctl+0x79/0x90 [<ffffffff8193d7ea>] entry_SYSCALL_64_fastpath+0x18/0xad [<ffffffffffffffff>] 0xffffffffffffffff (gdb) list *mlx4_en_try_alloc_resources+0x118 0xffffffff8170e0a8 is in mlx4_en_try_alloc_resources (drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2145). 2140 if (!dst->tx_ring_num[t]) 2141 continue; 2142 2143 dst->tx_ring[t] = kzalloc(sizeof(struct mlx4_en_tx_ring *) * 2144 MAX_TX_RINGS, GFP_KERNEL); 2145 if (!dst->tx_ring[t]) 2146 goto err_free_tx; 2147 2148 dst->tx_cq[t] = kzalloc(sizeof(struct mlx4_en_cq *) * 2149 MAX_TX_RINGS, GFP_KERNEL); (gdb) list *mlx4_en_try_alloc_resources+0x13b 0xffffffff8170e0cb is in mlx4_en_try_alloc_resources (drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2150). 2145 if (!dst->tx_ring[t]) 2146 goto err_free_tx; 2147 2148 dst->tx_cq[t] = kzalloc(sizeof(struct mlx4_en_cq *) * 2149 MAX_TX_RINGS, GFP_KERNEL); 2150 if (!dst->tx_cq[t]) { 2151 kfree(dst->tx_ring[t]); 2152 goto err_free_tx; 2153 } 2154 } Fixes: ec25bc04 ("net/mlx4_en: Add resilience in low memory systems") Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
- 01 Feb, 2017 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix handling of interrupt status in stmmac driver. Just because we have masked the event from generating interrupts, doesn't mean the bit won't still be set in the interrupt status register. From Alexey Brodkin. 2) Fix DMA API debugging splats in gianfar driver, from Arseny Solokha. 3) Fix off-by-one error in __ip6_append_data(), from Vlad Yasevich. 4) cls_flow does not match on icmpv6 codes properly, from Simon Horman. 5) Initial MAC address can be set incorrectly in some scenerios, from Ivan Vecera. 6) Packet header pointer arithmetic fix in ip6_tnl_parse_tlv_end_lim(), from Dan Carpenter. 7) Fix divide by zero in __tcp_select_window(), from Eric Dumazet. 8) Fix crash in iwlwifi when unregistering thermal zone, from Jens Axboe. 9) Check for DMA mapping errors in starfire driver, from Alexey Khoroshilov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (31 commits) tcp: fix 0 divide in __tcp_select_window() ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim() net: fix ndo_features_check/ndo_fix_features comment ordering net/sched: matchall: Fix configuration race be2net: fix initial MAC setting ipv6: fix flow labels when the traffic class is non-0 net: thunderx: avoid dereferencing xcv when NULL net/sched: cls_flower: Correct matching on ICMPv6 code ipv6: Paritially checksum full MTU frames net/mlx4_core: Avoid command timeouts during VF driver device shutdown gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page net: ethtool: add support for 2500BaseT and 5000BaseT link modes can: bcm: fix hrtimer/tasklet termination in bcm op removal net: adaptec: starfire: add checks for dma mapping errors net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause can: Fix kernel panic at security_sock_rcv_skb net: macb: Fix 64 bit addressing support for GEM stmmac: Discard masked flags in interrupt status register net/mlx5e: Check ets capability before ets query FW command net/mlx5e: Fix update of hash function/key via ethtool ... -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull fscache fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fscache: Fix dead object requeue fscache: Clear outstanding writes when disabling a cookie FS-Cache: Initialise stores_lock in netfs cookie
-
Eric Dumazet authored
syszkaller fuzzer was able to trigger a divide by zero, when TCP window scaling is not enabled. SO_RCVBUF can be used not only to increase sk_rcvbuf, also to decrease it below current receive buffers utilization. If mss is negative or 0, just return a zero TCP window. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Dan Carpenter authored
Casting is a high precedence operation but "off" and "i" are in terms of bytes so we need to have some parenthesis here. Fixes: fbfa743a ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes a bug in CBC/CTR on ARM64 that breaks chaining as well as a bug in the core API that causes registration failures when a driver unloads and then reloads an algorithm" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes crypto: api - Clear CRYPTO_ALG_DEAD bit before registering an alg
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "A couple of fixes showed up late in the cycle so sending them up and sending early in the week and not on Friday :). They fix a double lock in pl330 driver and runtime pm fixes for cppi driver" * tag 'dmaengine-fix-4.10-rc7' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: pl330: fix double lock dmaengine: cppi41: Clean up pointless warnings dmaengine: cppi41: Fix oops in cppi41_runtime_resume dmaengine: cppi41: Fix runtime PM timeouts with USB mass storage
-
Dimitris Michailidis authored
Commit cdba756f ("net: move ndo_features_check() close to ndo_start_xmit()") inadvertently moved the doc comment for .ndo_fix_features instead of .ndo_features_check. Fix the comment ordering. Fixes: cdba756f ("net: move ndo_features_check() close to ndo_start_xmit()") Signed-off-by:
Dimitris Michailidis <dmichail@google.com> Acked-by:
-
Yotam Gigi authored
In the current version, the matchall internal state is split into two structs: cls_matchall_head and cls_matchall_filter. This makes little sense, as matchall instance supports only one filter, and there is no situation where one exists and the other does not. In addition, that led to some races when filter was deleted while packet was processed. Unify that two structs into one, thus simplifying the process of matchall creation and deletion. As a result, the new, delete and get callbacks have a dummy implementation where all the work is done in destroy and change callbacks, as was done in cls_cgroup. Fixes: bf3994d2 ("net/sched: introduce Match-all classifier") Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Another week, another set of pin control fixes. The subsystem has seen high patch-spot activity recently. The majority of the patches are for Intel, I vaguely think it mostly concern phones, tablets and maybe chromebooks and even laptops with this Intel Atom family chips. Driver fixes only: - one fix to the Berlin driver making the SD card work fully again. - one fix to the Allwinner/sunxi bias function: one premature change needs to be partially reverted. - the remaining four patches are to Intel embedded SoCs: baytrail (three patches) and merrifield (one patch): register access debounce fixes and a missing spinlock" * tag 'pinctrl-v4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handler pinctrl: baytrail: Debounce register is one per community pinctrl: baytrail: Rectify debounce support (part 2) pinctrl: intel: merrifield: Add missed check in mrfld_config_set() pinctrl: sunxi: Don't enforce bias disable (for now) pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRES -
Ivan Vecera authored
Recent commit 34393529 ("be2net: fix MAC addr setting on privileged BE3 VFs") allows privileged BE3 VFs to set its MAC address during initialization. Although the initial MAC for such VFs is already programmed by parent PF the subsequent setting performed by VF is OK, but in certain cases (after fresh boot) this command in VF can fail. The MAC should be initialized only when: 1) no MAC is programmed (always except BE3 VFs during first init) 2) programmed MAC is different from requested (e.g. MAC is set when interface is down). In this case the initial MAC programmed by PF needs to be deleted. The adapter->dev_mac contains MAC address currently programmed in HW so it should be zeroed when the MAC is deleted from HW and should not be filled when MAC is set when interface is down in be_mac_addr_set() as no programming is performed in this case. Example of failure without the fix (immediately after fresh boot): # ip link set eth0 up <- eth0 is BE3 PF be2net 0000:01:00.0 eth0: Link is Up # echo 1 > /sys/class/net/eth0/device/sriov_numvfs <- Create 1 VF ... be2net 0000:01:04.0: Emulex OneConnect(be3): VF port 0 # ip link set eth8 up <- eth8 is created privileged VF be2net 0000:01:04.0: opcode 59-1 failed:status 1-76 RTNETLINK answers: Input/output error # echo 0 > /sys/class/net/eth0/device/sriov_numvfs <- Delete VF iommu: Removing device 0000:01:04.0 from group 33 ... # echo 1 > /sys/class/net/eth0/device/sriov_numvfs <- Create it again iommu: Removing device 0000:01:04.0 from group 33 ... # ip link set eth8 up be2net 0000:01:04.0 eth8: Link is Up Initialization is now OK. v2 - Corrected the comment and condition check suggested by Suresh & Harsha Fixes: 34393529 ("be2net: fix MAC addr setting on privileged BE3 VFs") Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Ivan Vecera <cera@cera.cz> Acked-by:
Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "It was reported to me that the thread created by the hwlat tracer does not migrate after the first instance. I found that there was as small bug in the logic, and fixed it. It's minor, but should be fixed regardless. There's not much impact outside the hwlat tracer" * tag 'trace-4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix hwlat kthread migration
-
- 31 Jan, 2017 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input subsystem fixes from Dmitry Torokhov: "A fix for a crash in the wm97xx driver and synaptics-rmi4 will stop throwing erroneous warnings." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wake Input: wm97xx - make missing platform data non-fatal
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fix from Tejun Heo: "The cgroup creation path was getting the order of operations wrong and exposing cgroups which don't have their names set yet to controllers which can lead to NULL derefs. This contains the fix for the bug" * 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: don't online subsystems before cgroup_name/path() are operational
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
Pull percpu fix from Tejun Heo: "Douglas found and fixed a ref leak bug in percpu_ref_tryget[_live](). The bug is caused by storing the return value of atomic_long_inc_not_zero() into an int temp variable before returning it as a bool. The interim cast to int loses the upper bits and can lead to false negatives. As percpu_ref uses a high bit to mark a draining counter, this can happen relatively easily. Fixed by using bool for the temp variable" * 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu-refcount: fix reference leak during percpu-atomic transition
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixes from Tejun Heo: "Three libata fixes: an error handling fix, blacklist addition for another fallout from upping the default max sectors, and fix for a sense data reporting bug which affects new harddrives which can report sense data" * 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: sata_mv:- Handle return value of devm_ioremap. libata: Fix ATA request sense libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - regression fix (sleeping while atomic) for cp2112, from Johan Hovold - regression fix for proximity handling under certain circumstances in Wacom driver, from Jason Gerecke - functional fix for Logitech Rumblepad 2, from Ardinartsev Nikita * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: cp2112: fix gpio-callback error handling HID: cp2112: fix sleep-while-atomic HID: hid-lg: Fix immediate disconnection of Logitech Rumblepad 2 HID: usbhid: Quirk a AMI virtual mouse and keyboard with ALWAYS_POLL HID: wacom: Fix poor prox handling in 'wacom_pl_irq'
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fix from Steve French: "A small cifs fix for stable" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: initialize file_info_lock
-
David Howells authored
Under some circumstances, an fscache object can become queued such that it fscache_object_work_func() can be called once the object is in the OBJECT_DEAD state. This results in the kernel oopsing when it tries to invoke the handler for the state (which is hard coded to 0x2). The way this comes about is something like the following: (1) The object dispatcher is processing a work state for an object. This is done in workqueue context. (2) An out-of-band event comes in that isn't masked, causing the object to be queued, say EV_KILL. (3) The object dispatcher finishes processing the current work state on that object and then sees there's another event to process, so, without returning to the workqueue core, it processes that event too. It then follows the chain of events that initiates until we reach OBJECT_DEAD without going through a wait state (such as WAIT_FOR_CLEARANCE). At this point, object->events may be 0, object->event_mask will be 0 and oob_event_mask will be 0. (4) The object dispatcher returns to the workqueue processor, and in due course, this sees that the object's work item is still queued and invokes it again. (5) The current state is a work state (OBJECT_DEAD), so the dispatcher jumps to it - resulting in an OOPS. When I'm seeing this, the work state in (1) appears to have been either LOOK_UP_OBJECT or CREATE_OBJECT (object->oob_table is fscache_osm_lookup_oob). The window for (2) is very small: (A) object->event_mask is cleared whilst the event dispatch process is underway - though there's no memory barrier to force this to the top of the function. The window, therefore is from the time the object was selected by the workqueue processor and made requeueable to the time the mask was cleared. (B) fscache_raise_event() will only queue the object if it manages to set the event bit and the corresponding event_mask bit was set. The enqueuement is then deferred slightly whilst we get a ref on the object and get the per-CPU variable for workqueue congestion. This slight deferral slightly increases the probability by allowing extra time for the workqueue to make the item requeueable. Handle this by giving the dead state a processor function and checking the for the dead state address rather than seeing if the processor function is address 0x2. The dead state processor function can then set a flag to indicate that it's occurred and give a warning if it occurs more than once per object. If this race occurs, an oops similar to the following is seen (note the RIP value): BUG: unable to handle kernel NULL pointer dereference at 0000000000000002 IP: [<0000000000000002>] 0x1 PGD 0 Oops: 0010 [#1] SMP Modules linked in: ... CPU: 17 PID: 16077 Comm: kworker/u48:9 Not tainted 3.10.0-327.18.2.el7.x86_64 #1 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015 Workqueue: fscache_object fscache_object_work_func [fscache] task: ffff880302b63980 ti: ffff880717544000 task.ti: ffff880717544000 RIP: 0010:[<0000000000000002>] [<0000000000000002>] 0x1 RSP: 0018:ffff880717547df8 EFLAGS: 00010202 RAX: ffffffffa0368640 RBX: ffff880edf7a4480 RCX: dead000000200200 RDX: 0000000000000002 RSI: 00000000ffffffff RDI: ffff880edf7a4480 RBP: ffff880717547e18 R08: 0000000000000000 R09: dfc40a25cb3a4510 R10: dfc40a25cb3a4510 R11: 0000000000000400 R12: 0000000000000000 R13: ffff880edf7a4510 R14: ffff8817f6153400 R15: 0000000000000600 FS: 0000000000000000(0000) GS:ffff88181f420000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000002 CR3: 000000000194a000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa0363695 ffff880edf7a4510 ffff88093f16f900 ffff8817faa4ec00 ffff880717547e60 ffffffff8109d5db 00000000faa4ec18 0000000000000000 ffff8817faa4ec18 ffff88093f16f930 ffff880302b63980 ffff88093f16f900 Call Trace: [<ffffffffa0363695>] ? fscache_object_work_func+0xa5/0x200 [fscache] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e4ac>] worker_thread+0x21c/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff816460d8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 Signed-off-by:David Howells <dhowells@redhat.com> Acked-by:
Jeremy McNicoll <jeremymc@redhat.com> Tested-by:
Frank Sorenson <sorenson@redhat.com> Tested-by:
Benjamin Coddington <bcodding@redhat.com> Reviewed-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
fscache_disable_cookie() needs to clear the outstanding writes on the cookie it's disabling because they cannot be completed after. Without this, fscache_nfs_open_file() gets stuck because it disables the cookie when the file is opened for writing but can't uncache the pages till afterwards - otherwise there's a race between the open routine and anyone who already has it open R/O and is still reading from it. Looking in /proc/pid/stack of the offending process shows: [<ffffffffa0142883>] __fscache_wait_on_page_write+0x82/0x9b [fscache] [<ffffffffa014336e>] __fscache_uncache_all_inode_pages+0x91/0xe1 [fscache] [<ffffffffa01740fa>] nfs_fscache_open_file+0x59/0x9e [nfs] [<ffffffffa01ccf41>] nfs4_file_open+0x17f/0x1b8 [nfsv4] [<ffffffff8117350e>] do_dentry_open+0x16d/0x2b7 [<ffffffff811743ac>] vfs_open+0x5c/0x65 [<ffffffff81184185>] path_openat+0x785/0x8fb [<ffffffff81184343>] do_filp_open+0x48/0x9e [<ffffffff81174710>] do_sys_open+0x13b/0x1cb [<ffffffff811747b9>] SyS_open+0x19/0x1b [<ffffffff81001c44>] do_syscall_64+0x80/0x17a [<ffffffff8165c2da>] return_from_SYSCALL_64+0x0/0x7a [<ffffffffffffffff>] 0xffffffffffffffff Reported-by:
Jianhong Yin <jiyin@redhat.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Acked-by:
Steve Dickson <steved@redhat.com> Signed-off-by:
-
David Howells authored
Initialise the stores_lock in fscache netfs cookies. Technically, it shouldn't be necessary, since the netfs cookie is an index and stores no data, but initialising it anyway adds insignificant overhead. Signed-off-by:
-
Dimitris Michailidis authored
ip6_make_flowlabel() determines the flow label for IPv6 packets. It's supposed to be passed a flow label, which it returns as is if non-0 and in some other cases, otherwise it calculates a new value. The problem is callers often pass a flowi6.flowlabel, which may also contain traffic class bits. If the traffic class is non-0 ip6_make_flowlabel() mistakes the non-0 it gets as a flow label and returns the whole thing. Thus it can return a 'flow label' longer than 20b and the low 20b of that is typically 0 resulting in packets with 0 label. Moreover, different packets of a flow may be labeled differently. For a TCP flow with ECN non-payload and payload packets get different labels as exemplified by this pair of consecutive packets: (pure ACK) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... .... .... 0001 1100 1110 0100 1001 = Flow Label: 0x1ce49 Payload Length: 32 Next Header: TCP (6) (payload) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0)) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) .... .... .... 0000 0000 0000 0000 0000 = Flow Label: 0x00000 Payload Length: 688 Next Header: TCP (6) This patch allows ip6_make_flowlabel() to be passed more than just a flow label and has it extract the part it really wants. This was simpler than modifying the callers. With this patch packets like the above become Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e Payload Length: 32 Next Header: TCP (6) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0)) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e Payload Length: 688 Next Header: TCP (6) Signed-off-by: -
Vincent authored
This fixes the following smatch and coccinelle warnings: drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119 xcv_setup_link() error: we previously assumed 'xcv' could be null (see line 118) [smatch] drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119:16-20: ERROR: xcv is NULL but dereferenced. [coccinelle] Fixes: 6465859a ("net: thunderx: Add RGMII interface type support") Signed-off-by:
Vincent Stehlé <vincent.stehle@laposte.net> Cc: Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
The hwlat tracer creates a kernel thread at start of the tracer. It is pinned to a single CPU and will move to the next CPU after each period of running. If the user modifies the migration thread's affinity, it will not change after that happens. The original code created the thread at the first instance it was called, but later was changed to destroy the thread after the tracer was finished, and would not be created until the next instance of the tracer was established. The code that initialized the affinity was only called on the initial instantiation of the tracer. After that, it was not initialized, and the previous affinity did not match the current newly created one, making it appear that the user modified the thread's affinity when it did not, and the thread failed to migrate again. Cc: stable@vger.kernel.org Fixes: 0330f7aa ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
