1. 29 Sep, 2015 4 commits
    • Karl Heiss's avatar
      sctp: Prevent soft lockup when sctp_accept() is called during a timeout event · 635682a1
      Karl Heiss authored
      A case can occur when sctp_accept() is called by the user during
      a heartbeat timeout event after the 4-way handshake.  Since
      sctp_assoc_migrate() changes both assoc->base.sk and assoc->ep, the
      bh_sock_lock in sctp_generate_heartbeat_event() will be taken with
      the listening socket but released with the new association socket.
      The result is a deadlock on any future attempts to take the listening
      socket lock.
      
      Note that this race can occur with other SCTP timeouts that take
      the bh_lock_sock() in the event sctp_accept() is called.
      
       BUG: soft lockup - CPU#9 stuck for 67s! [swapper:0]
       ...
       RIP: 0010:[<ffffffff8152d48e>]  [<ffffffff8152d48e>] _spin_lock+0x1e/0x30
       RSP: 0018:ffff880028323b20  EFLAGS: 00000206
       RAX: 0000000000000002 RBX: ffff880028323b20 RCX: 0000000000000000
       RDX: 0000000000000000 RSI: ffff880028323be0 RDI: ffff8804632c4b48
       RBP: ffffffff8100bb93 R08: 0000000000000000 R09: 0000000000000000
       R10: ffff880610662280 R11: 0000000000000100 R12: ffff880028323aa0
       R13: ffff8804383c3880 R14: ffff880028323a90 R15: ffffffff81534225
       FS:  0000000000000000(0000) GS:ffff880028320000(0000) knlGS:0000000000000000
       CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
       CR2: 00000000006df528 CR3: 0000000001a85000 CR4: 00000000000006e0
       DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
       DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
       Process swapper (pid: 0, threadinfo ffff880616b70000, task ffff880616b6cab0)
       Stack:
       ffff880028323c40 ffffffffa01c2582 ffff880614cfb020 0000000000000000
       <d> 0100000000000000 00000014383a6c44 ffff8804383c3880 ffff880614e93c00
       <d> ffff880614e93c00 0000000000000000 ffff8804632c4b00 ffff8804383c38b8
       Call Trace:
       <IRQ>
       [<ffffffffa01c2582>] ? sctp_rcv+0x492/0xa10 [sctp]
       [<ffffffff8148c559>] ? nf_iterate+0x69/0xb0
       [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0
       [<ffffffff8148c716>] ? nf_hook_slow+0x76/0x120
       [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0
       [<ffffffff8149757d>] ? ip_local_deliver_finish+0xdd/0x2d0
       [<ffffffff81497808>] ? ip_local_deliver+0x98/0xa0
       [<ffffffff81496ccd>] ? ip_rcv_finish+0x12d/0x440
       [<ffffffff81497255>] ? ip_rcv+0x275/0x350
       [<ffffffff8145cfeb>] ? __netif_receive_skb+0x4ab/0x750
       ...
      
      With lockdep debugging:
      
       =====================================
       [ BUG: bad unlock balance detected! ]
       -------------------------------------
       CslRx/12087 is trying to release lock (slock-AF_INET) at:
       [<ffffffffa01bcae0>] sctp_generate_timeout_event+0x40/0xe0 [sctp]
       but there are no more locks to release!
      
       other info that might help us debug this:
       2 locks held by CslRx/12087:
       #0:  (&asoc->timers[i]){+.-...}, at: [<ffffffff8108ce1f>] run_timer_softirq+0x16f/0x3e0
       #1:  (slock-AF_INET){+.-...}, at: [<ffffffffa01bcac3>] sctp_generate_timeout_event+0x23/0xe0 [sctp]
      
      Ensure the socket taken is also the same one that is released by
      saving a copy of the socket before entering the timeout event
      critical section.
      Signed-off-by: default avatarKarl Heiss <kheiss@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      635682a1
    • Karl Heiss's avatar
      sctp: Whitespace fix · f05940e6
      Karl Heiss authored
      Fix indentation in sctp_generate_heartbeat_event.
      Signed-off-by: default avatarKarl Heiss <kheiss@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f05940e6
    • Mitch Williams's avatar
      i40e/i40evf: check for stopped admin queue · 43ae93a9
      Mitch Williams authored
      It's possible that while we are waiting for the spinlock, another
      entity (that owns the spinlock) has shut down the admin queue.
      If we then attempt to use the queue, we will panic.
      
      Add a check for this condition on the receive side. This matches
      an existing check on the send queue side.
      Signed-off-by: default avatarMitch Williams <mitch.a.williams@intel.com>
      Acked-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      43ae93a9
    • Jesse Brandeburg's avatar
      i40e: fix VLAN inside VXLAN · c4bbac39
      Jesse Brandeburg authored
      Previously to this patch, the hardware was removing
      VLAN tags from the inner header of VXLAN packets.  The
      hardware configuration can be changed to leave the
      packet alone since that is what the linux stack
      expects for this type of VLAN in VXLAN packet.
      Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
      Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c4bbac39
  2. 27 Sep, 2015 2 commits
  3. 26 Sep, 2015 3 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 518a7cb6
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) When we run a tap on netlink sockets, we have to copy mmap'd SKBs
          instead of cloning them.  From Daniel Borkmann.
      
       2) When converting classical BPF into eBPF, fix the setting of the
          source reg to BPF_REG_X.  From Tycho Andersen.
      
       3) Fix igmpv3/mldv2 report parsing in the bridge multicast code, from
          Linus Lussing.
      
       4) Fix dst refcounting for ipv6 tunnels, from Martin KaFai Lau.
      
       5) Set NLM_F_REPLACE flag properly when replacing ipv6 routes, from
          Roopa Prabhu.
      
       6) Add some new cxgb4 PCI device IDs, from Hariprasad Shenai.
      
       7) Fix headroom tests and SKB leaks in ipv6 fragmentation code, from
          Florian Westphal.
      
       8) Check DMA mapping errors in bna driver, from Ivan Vecera.
      
       9) Several 8139cp bug fixes (dev_kfree_skb_any in interrupt context,
          misclearing of interrupt status in TX timeout handler, etc.) from
          David Woodhouse.
      
      10) In tipc, reset SKB header pointer after skb_linearize(), from Erik
          Hugne.
      
      11) Fix autobind races et al. in netlink code, from Herbert Xu with
          help from Tejun Heo and others.
      
      12) Missing SET_NETDEV_DEV in sunvnet driver, from Sowmini Varadhan.
      
      13) Fix various races in timewait timer and reqsk_queue_hadh_req, from
          Eric Dumazet.
      
      14) Fix array overruns in mac80211, from Johannes Berg and Dan
          Carpenter.
      
      15) Fix data race in rhashtable_rehash_one(), from Dmitriy Vyukov.
      
      16) Fix race between poll_one_napi and napi_disable, from Neil Horman.
      
      17) Fix byte order in geneve tunnel port config, from John W Linville.
      
      18) Fix handling of ARP replies over lightweight tunnels, from Jiri
          Benc.
      
      19) We can loop when fib rule dumps cross multiple SKBs, fix from Wilson
          Kok and Roopa Prabhu.
      
      20) Several reference count handling bug fixes in the PHY/MDIO layer
          from Russel King.
      
      21) Fix lockdep splat in ppp_dev_uninit(), from Guillaume Nault.
      
      22) Fix crash in icmp_route_lookup(), from David Ahern.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
        net: Fix panic in icmp_route_lookup
        net: update docbook comment for __mdiobus_register()
        ppp: fix lockdep splat in ppp_dev_uninit()
        net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected
        phy: marvell: add link partner advertised modes
        net: fix net_device refcounting
        phy: add phy_device_remove()
        phy: fixed-phy: properly validate phy in fixed_phy_update_state()
        net: fix phy refcounting in a bunch of drivers
        of_mdio: fix MDIO phy device refcounting
        phy: add proper phy struct device refcounting
        phy: fix mdiobus module safety
        net: dsa: fix of_mdio_find_bus() device refcount leak
        phy: fix of_mdio_find_bus() device refcount leak
        ip6_tunnel: Reduce log level in ip6_tnl_err() to debug
        ip6_gre: Reduce log level in ip6gre_err() to debug
        fib_rules: fix fib rule dumps across multiple skbs
        bnx2x: byte swap rss_key to comply to Toeplitz specs
        net: revert "net_sched: move tp->root allocation into fw_init()"
        lwtunnel: remove source and destination UDP port config option
        ...
      518a7cb6
    • David Ahern's avatar
      net: Fix panic in icmp_route_lookup · bdb06cbf
      David Ahern authored
      Andrey reported a panic:
      
      [ 7249.865507] BUG: unable to handle kernel pointer dereference at 000000b4
      [ 7249.865559] IP: [<c16afeca>] icmp_route_lookup+0xaa/0x320
      [ 7249.865598] *pdpt = 0000000030f7f001 *pde = 0000000000000000
      [ 7249.865637] Oops: 0000 [#1]
      ...
      [ 7249.866811] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
      4.3.0-999-generic #201509220155
      [ 7249.866876] Hardware name: MSI MS-7250/MS-7250, BIOS 080014  08/02/2006
      [ 7249.866916] task: c1a5ab00 ti: c1a52000 task.ti: c1a52000
      [ 7249.866949] EIP: 0060:[<c16afeca>] EFLAGS: 00210246 CPU: 0
      [ 7249.866981] EIP is at icmp_route_lookup+0xaa/0x320
      [ 7249.867012] EAX: 00000000 EBX: f483ba48 ECX: 00000000 EDX: f2e18a00
      [ 7249.867045] ESI: 000000c0 EDI: f483ba70 EBP: f483b9ec ESP: f483b974
      [ 7249.867077]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
      [ 7249.867108] CR0: 8005003b CR2: 000000b4 CR3: 36ee07c0 CR4: 000006f0
      [ 7249.867141] Stack:
      [ 7249.867165]  320310ee 00000000 00000042 320310ee 00000000 c1aeca00
      f3920240 f0c69180
      [ 7249.867268]  f483ba04 f855058b a89b66cd f483ba44 f8962f4b 00000000
      e659266c f483ba54
      [ 7249.867361]  8004753c f483ba5c f8962f4b f2031140 000003c1 ffbd8fa0
      c16b0e00 00000064
      [ 7249.867448] Call Trace:
      [ 7249.867494]  [<f855058b>] ? e1000_xmit_frame+0x87b/0xdc0 [e1000e]
      [ 7249.867534]  [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack]
      [ 7249.867576]  [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack]
      [ 7249.867615]  [<c16b0e00>] ? icmp_send+0xa0/0x380
      [ 7249.867648]  [<c16b102f>] icmp_send+0x2cf/0x380
      [ 7249.867681]  [<f89c8126>] nf_send_unreach+0xa6/0xc0 [nf_reject_ipv4]
      [ 7249.867714]  [<f89cd0da>] reject_tg+0x7a/0x9f [ipt_REJECT]
      [ 7249.867746]  [<f88c29a7>] ipt_do_table+0x317/0x70c [ip_tables]
      [ 7249.867780]  [<f895e0a6>] ? __nf_conntrack_find_get+0x166/0x3b0
      [nf_conntrack]
      [ 7249.867838]  [<f895eea8>] ? nf_conntrack_in+0x398/0x600 [nf_conntrack]
      [ 7249.867889]  [<f84c0035>] iptable_filter_hook+0x35/0x80 [iptable_filter]
      [ 7249.867933]  [<c16776a1>] nf_iterate+0x71/0x80
      [ 7249.867970]  [<c1677715>] nf_hook_slow+0x65/0xc0
      [ 7249.868002]  [<c1681811>] __ip_local_out_sk+0xc1/0xd0
      [ 7249.868034]  [<c1680f30>] ? ip_forward_options+0x1a0/0x1a0
      [ 7249.868066]  [<c1681836>] ip_local_out_sk+0x16/0x30
      [ 7249.868097]  [<c1684054>] ip_send_skb+0x14/0x80
      [ 7249.868129]  [<c16840f4>] ip_push_pending_frames+0x34/0x40
      [ 7249.868163]  [<c16844a2>] ip_send_unicast_reply+0x282/0x310
      [ 7249.868196]  [<c16a0863>] tcp_v4_send_reset+0x1b3/0x380
      [ 7249.868227]  [<c16a1b63>] tcp_v4_rcv+0x323/0x990
      [ 7249.868257]  [<c16776a1>] ? nf_iterate+0x71/0x80
      [ 7249.868289]  [<c167dc2b>] ip_local_deliver_finish+0x8b/0x230
      [ 7249.868322]  [<c167df4c>] ip_local_deliver+0x4c/0xa0
      [ 7249.868353]  [<c167dba0>] ? ip_rcv_finish+0x390/0x390
      [ 7249.868384]  [<c167d88c>] ip_rcv_finish+0x7c/0x390
      [ 7249.868415]  [<c167e280>] ip_rcv+0x2e0/0x420
      ...
      
      Prior to the VRF change the oif was not set in the flow struct, so the
      VRF support should really have only added the vrf_master_ifindex lookup.
      
      Fixes: 613d09b3 ("net: Use VRF device index for lookups on TX")
      Cc: Andrey Melnikov <temnota.am@gmail.com>
      Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bdb06cbf
    • Russell King's avatar
      net: update docbook comment for __mdiobus_register() · 59f06978
      Russell King authored
      Update the docbook comment for __mdiobus_register() to include the new
      module owner argument.  This resolves a warning found by the 0-day
      builder.
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      59f06978
  4. 25 Sep, 2015 26 commits
    • Linus Torvalds's avatar
      Merge branch 'for-4.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup · d4a748a1
      Linus Torvalds authored
      Pull another cgroup fix from Tejun Heo:
       "The cgroup writeback support got inadvertently enabled for traditional
        hierarchies revealing two regressions which are currently being worked
        on.  It shouldn't have been enabled on traditional hierarchies, so
        disable it on them.  This is enough to make the regressions go away
        for people who aren't experimenting with cgroup"
      
      * 'for-4.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
        cgroup, writeback: don't enable cgroup writeback on traditional hierarchies
      d4a748a1
    • Guillaume Nault's avatar
      ppp: fix lockdep splat in ppp_dev_uninit() · 58a89eca
      Guillaume Nault authored
      ppp_dev_uninit() locks all_ppp_mutex while under rtnl mutex protection.
      ppp_create_interface() must then lock these mutexes in that same order
      to avoid possible deadlock.
      
      [  120.880011] ======================================================
      [  120.880011] [ INFO: possible circular locking dependency detected ]
      [  120.880011] 4.2.0 #1 Not tainted
      [  120.880011] -------------------------------------------------------
      [  120.880011] ppp-apitest/15827 is trying to acquire lock:
      [  120.880011]  (&pn->all_ppp_mutex){+.+.+.}, at: [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic]
      [  120.880011]
      [  120.880011] but task is already holding lock:
      [  120.880011]  (rtnl_mutex){+.+.+.}, at: [<ffffffff812e4255>] rtnl_lock+0x12/0x14
      [  120.880011]
      [  120.880011] which lock already depends on the new lock.
      [  120.880011]
      [  120.880011]
      [  120.880011] the existing dependency chain (in reverse order) is:
      [  120.880011]
      [  120.880011] -> #1 (rtnl_mutex){+.+.+.}:
      [  120.880011]        [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e
      [  120.880011]        [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341
      [  120.880011]        [<ffffffff812e4255>] rtnl_lock+0x12/0x14
      [  120.880011]        [<ffffffff812d9d94>] register_netdev+0x11/0x27
      [  120.880011]        [<ffffffffa0147b17>] ppp_ioctl+0x289/0xc98 [ppp_generic]
      [  120.880011]        [<ffffffff8113b367>] do_vfs_ioctl+0x4ea/0x532
      [  120.880011]        [<ffffffff8113b3fd>] SyS_ioctl+0x4e/0x7d
      [  120.880011]        [<ffffffff813ad7d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
      [  120.880011]
      [  120.880011] -> #0 (&pn->all_ppp_mutex){+.+.+.}:
      [  120.880011]        [<ffffffff8107334e>] __lock_acquire+0xb07/0xe76
      [  120.880011]        [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e
      [  120.880011]        [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341
      [  120.880011]        [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic]
      [  120.880011]        [<ffffffff812d5263>] rollback_registered_many+0x19e/0x252
      [  120.880011]        [<ffffffff812d5381>] rollback_registered+0x29/0x38
      [  120.880011]        [<ffffffff812d53fa>] unregister_netdevice_queue+0x6a/0x77
      [  120.880011]        [<ffffffffa0146a94>] ppp_release+0x42/0x79 [ppp_generic]
      [  120.880011]        [<ffffffff8112d9f6>] __fput+0xec/0x192
      [  120.880011]        [<ffffffff8112dacc>] ____fput+0x9/0xb
      [  120.880011]        [<ffffffff8105447a>] task_work_run+0x66/0x80
      [  120.880011]        [<ffffffff81001801>] prepare_exit_to_usermode+0x8c/0xa7
      [  120.880011]        [<ffffffff81001900>] syscall_return_slowpath+0xe4/0x104
      [  120.880011]        [<ffffffff813ad931>] int_ret_from_sys_call+0x25/0x9f
      [  120.880011]
      [  120.880011] other info that might help us debug this:
      [  120.880011]
      [  120.880011]  Possible unsafe locking scenario:
      [  120.880011]
      [  120.880011]        CPU0                    CPU1
      [  120.880011]        ----                    ----
      [  120.880011]   lock(rtnl_mutex);
      [  120.880011]                                lock(&pn->all_ppp_mutex);
      [  120.880011]                                lock(rtnl_mutex);
      [  120.880011]   lock(&pn->all_ppp_mutex);
      [  120.880011]
      [  120.880011]  *** DEADLOCK ***
      
      Fixes: 8cb775bc ("ppp: fix device unregistration upon netns deletion")
      Reported-by: default avatarSedat Dilek <sedat.dilek@gmail.com>
      Tested-by: default avatarSedat Dilek <sedat.dilek@gmail.com>
      Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      58a89eca
    • Sudip Mukherjee's avatar
      net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected · 21343ac2
      Sudip Mukherjee authored
      The builds of allmodconfig of avr32 is failing with:
      
      drivers/net/ethernet/via/via-rhine.c:1098:2: error: implicit declaration
      of function 'pci_iomap' [-Werror=implicit-function-declaration]
      drivers/net/ethernet/via/via-rhine.c:1119:2: error: implicit declaration
      of function 'pci_iounmap' [-Werror=implicit-function-declaration]
      
      The generic empty pci_iomap and pci_iounmap is used only if CONFIG_PCI
      is not defined and CONFIG_GENERIC_PCI_IOMAP is defined.
      
      Add GENERIC_PCI_IOMAP in the dependency list for VIA_RHINE as we are
      getting build failure when CONFIG_PCI and CONFIG_GENERIC_PCI_IOMAP both
      are not defined.
      Signed-off-by: default avatarSudip Mukherjee <sudip@vectorindia.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      21343ac2
    • Russell King's avatar
      phy: marvell: add link partner advertised modes · 357cd64c
      Russell King authored
      Read the standard link partner advertisment registers and store it in
      phydev->lp_advertising, so ethtool can report this information to
      userspace via ethtool.  Zero it as per genphy if autonegotiation is
      disabled.  Tested with a Marvell 88E1512 PHY.
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      357cd64c
    • Linus Torvalds's avatar
      Merge branch 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs · 03e8f644
      Linus Torvalds authored
      Pull btrfs fixes from Chris Mason:
       "This is an assorted set I've been queuing up:
      
        Jeff Mahoney tracked down a tricky one where we ended up starting IO
        on the wrong mapping for special files in btrfs_evict_inode.  A few
        people reported this one on the list.
      
        Filipe found (and provided a test for) a difficult bug in reading
        compressed extents, and Josef fixed up some quota record keeping with
        snapshot deletion.  Chandan killed off an accounting bug during DIO
        that lead to WARN_ONs as we freed inodes"
      
      * 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
        Btrfs: keep dropped roots in cache until transaction commit
        Btrfs: Direct I/O: Fix space accounting
        btrfs: skip waiting on ordered range for special files
        Btrfs: fix read corruption of compressed and shared extents
        Btrfs: remove unnecessary locking of cleaner_mutex to avoid deadlock
        Btrfs: don't initialize a space info as full to prevent ENOSPC
      03e8f644
    • Linus Torvalds's avatar
      Merge tag 'nfs-for-4.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · 101688f5
      Linus Torvalds authored
      Pull NFS client bugfixes from Trond Myklebust:
       "Highlights include:
      
        Stable patches:
         - fix v4.2 SEEK on files over 2 gigs
         - Fix a layout segment reference leak when pNFS I/O falls back to inband I/O.
         - Fix recovery of recalled read delegations
      
        Bugfixes:
         - Fix a case where NFSv4 fails to send CLOSE after a server reboot
         - Fix sunrpc to wait for connections to complete before retrying
         - Fix sunrpc races between transport connect/disconnect and shutdown
         - Fix an infinite loop when layoutget fail with BAD_STATEID
         - nfs/filelayout: Fix NULL reference caused by double freeing of fh_array
         - Fix a bogus WARN_ON_ONCE() in O_DIRECT when layout commit_through_mds is set
         - Fix layoutreturn/close ordering issues"
      
      * tag 'nfs-for-4.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
        NFS41: make close wait for layoutreturn
        NFS: Skip checking ds_cinfo.buckets when lseg's commit_through_mds is set
        NFSv4.x/pnfs: Don't try to recover stateids twice in layoutget
        NFSv4: Recovery of recalled read delegations is broken
        NFS: Fix an infinite loop when layoutget fail with BAD_STATEID
        NFS: Do cleanup before resetting pageio read/write to mds
        SUNRPC: xs_sock_mark_closed() does not need to trigger socket autoclose
        SUNRPC: Lock the transport layer on shutdown
        nfs/filelayout: Fix NULL reference caused by double freeing of fh_array
        SUNRPC: Ensure that we wait for connections to complete before retrying
        SUNRPC: drop null test before destroy functions
        nfs: fix v4.2 SEEK on files over 2 gigs
        SUNRPC: Fix races between socket connection and destroy code
        nfs: fix pg_test page count calculation
        Failing to send a CLOSE if file is opened WRONLY and server reboots on a 4.x mount
      101688f5
    • Linus Torvalds's avatar
      Merge tag 'sound-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · ddff42e5
      Linus Torvalds authored
      Pull sound fixes from Takashi Iwai:
       "This ended up with a larger set of fixes than wished, unfortunately.
      
        As diffstat shows, the majority of changes are for various ASoC
        drivers (Realtek, Wolfson codec drivers, etc), in addition to a couple
        of HD-audio regression fixes.  All these are reasonably small and
        nothing to scare much"
      
      * tag 'sound-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
        ALSA: hda - Disable power_save_node for Thinkpads
        ALSA: hda/tegra - async probe for avoiding module loading deadlock
        ASoC: rt5645: Prevent the pop sound in case of playback and the jack is plugging
        ASoC: rt5645: Increase the delay time to remove the pop sound
        ASoC: rt5645: Use the type SOC_DAPM_SINGLE_AUTODISABLE to prevent the weird sound in runtime of power up
        ASoC: pxa: pxa2xx-ac97: fix dma requestor lines
        MAINTAINERS: Update website and git repo for Wolfson Microelectronics
        ASoC: fsl_ssi: Fix checking of dai format for AC97 mode
        ASoC: wm0010: fix error path
        ASoC: wm0010: fix memory leak
        ASoC: wm8960: correct the max register value of mic boost pga
        ASoC: wm8962: remove 64k sample rate support
        ASoC: davinci-mcasp: Fix devm_kasprintf format string
        ASoC: fix broken pxa SoC support
        ASoC: davinci-mcasp: Set .symmetric_rates = 1 in snd_soc_dai_driver
        ASoC: au1x: psc-i2s: Fix unused variable 'ret' warning
        ASoC: SPEAr: Make SND_SPEAR_SOC select SND_SOC_GENERIC_DMAENGINE_PCM
        ASoC: mediatek: Increase periods_min in capture
        ASoC: davinci-mcasp: Revise the FIFO threshold calculation
        ASoC: wm8960: correct gain value for input PGA and add microphone PGA
        ...
      ddff42e5
    • Linus Torvalds's avatar
      Merge tag 'pci-v4.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci · 966966a6
      Linus Torvalds authored
      Pull PCI fixes from Bjorn Helgaas:
       "These are fixes for things we merged for v4.3 (VPD, MSI, and bridge
        window management), and a new Renesas R8A7794 SoC device ID.
      
        Details:
      
        Resource management:
         - Revert pci_read_bridge_bases() unification (Bjorn Helgaas)
         - Clear IORESOURCE_UNSET when clipping a bridge window (Bjorn
           Helgaas)
      
        MSI:
         - Fix MSI IRQ domains for VFs on virtual buses (Alex Williamson)
      
        Renesas R-Car host bridge driver:
         - Add R8A7794 support (Sergei Shtylyov)
      
        Miscellaneous:
         - Fix devfn for VPD access through function 0 (Alex Williamson)
         - Use function 0 VPD only for identical functions (Alex Williamson)"
      
      * tag 'pci-v4.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
        PCI: rcar: Add R8A7794 support
        PCI: Use function 0 VPD for identical functions, regular VPD for others
        PCI: Fix devfn for VPD access through function 0
        PCI/MSI: Fix MSI IRQ domains for VFs on virtual buses
        PCI: Clear IORESOURCE_UNSET when clipping a bridge window
        PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"
      966966a6
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · b6d980f4
      Linus Torvalds authored
      Pull KVM fixes from Paolo Bonzini:
       "AMD fixes for bugs introduced in the 4.2 merge window, and a few PPC
        bug fixes too"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
        KVM: disable halt_poll_ns as default for s390x
        KVM: x86: fix off-by-one in reserved bits check
        KVM: x86: use correct page table format to check nested page table reserved bits
        KVM: svm: do not call kvm_set_cr0 from init_vmcb
        KVM: x86: trap AMD MSRs for the TSeg base and mask
        KVM: PPC: Book3S: Take the kvm->srcu lock in kvmppc_h_logical_ci_load/store()
        KVM: PPC: Book3S HV: Pass the correct trap argument to kvmhv_commence_exit
        KVM: PPC: Book3S HV: Fix handling of interrupted VCPUs
        kvm: svm: reset mmu on VCPU reset
      b6d980f4
    • Linus Torvalds's avatar
      Merge tag 'powerpc-4.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux · 57cb635c
      Linus Torvalds authored
      Pull powerpc fixes from Michael Ellerman:
       - Wire up sys_membarrier()
       - cxl: Fix lockdep warning while creating afu_err_buff from Vaibhav
      
      * tag 'powerpc-4.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
        cxl: Fix lockdep warning while creating afu_err_buff attribute
        powerpc: Wire up sys_membarrier()
      57cb635c
    • David Hildenbrand's avatar
      KVM: disable halt_poll_ns as default for s390x · 920552b2
      David Hildenbrand authored
      We observed some performance degradation on s390x with dynamic
      halt polling. Until we can provide a proper fix, let's enable
      halt_poll_ns as default only for supported architectures.
      
      Architectures are now free to set their own halt_poll_ns
      default value.
      Signed-off-by: default avatarDavid Hildenbrand <dahi@linux.vnet.ibm.com>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      920552b2
    • Paolo Bonzini's avatar
      KVM: x86: fix off-by-one in reserved bits check · 58c95070
      Paolo Bonzini authored
      29ecd660 ("KVM: x86: avoid uninitialized variable warning",
      2015-09-06) introduced a not-so-subtle problem, which probably
      escaped review because it was not part of the patch context.
      
      Before the patch, leaf was always equal to iterator.level.  After,
      it is equal to iterator.level - 1 in the call to is_shadow_zero_bits_set,
      and when is_shadow_zero_bits_set does another "-1" the check on
      reserved bits becomes incorrect.  Using "iterator.level" in the call
      fixes this call trace:
      
      WARNING: CPU: 2 PID: 17000 at arch/x86/kvm/mmu.c:3385 handle_mmio_page_fault.part.93+0x1a/0x20 [kvm]()
      Modules linked in: tun sha256_ssse3 sha256_generic drbg binfmt_misc ipv6 vfat fat fuse dm_crypt dm_mod kvm_amd kvm crc32_pclmul aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd fam15h_power amd64_edac_mod k10temp edac_core amdkfd amd_iommu_v2 radeon acpi_cpufreq
      [...]
      Call Trace:
        dump_stack+0x4e/0x84
        warn_slowpath_common+0x95/0xe0
        warn_slowpath_null+0x1a/0x20
        handle_mmio_page_fault.part.93+0x1a/0x20 [kvm]
        tdp_page_fault+0x231/0x290 [kvm]
        ? emulator_pio_in_out+0x6e/0xf0 [kvm]
        kvm_mmu_page_fault+0x36/0x240 [kvm]
        ? svm_set_cr0+0x95/0xc0 [kvm_amd]
        pf_interception+0xde/0x1d0 [kvm_amd]
        handle_exit+0x181/0xa70 [kvm_amd]
        ? kvm_arch_vcpu_ioctl_run+0x68b/0x1730 [kvm]
        kvm_arch_vcpu_ioctl_run+0x6f6/0x1730 [kvm]
        ? kvm_arch_vcpu_ioctl_run+0x68b/0x1730 [kvm]
        ? preempt_count_sub+0x9b/0xf0
        ? mutex_lock_killable_nested+0x26f/0x490
        ? preempt_count_sub+0x9b/0xf0
        kvm_vcpu_ioctl+0x358/0x710 [kvm]
        ? __fget+0x5/0x210
        ? __fget+0x101/0x210
        do_vfs_ioctl+0x2f4/0x560
        ? __fget_light+0x29/0x90
        SyS_ioctl+0x4c/0x90
        entry_SYSCALL_64_fastpath+0x16/0x73
      ---[ end trace 37901c8686d84de6 ]---
      Reported-by: default avatarBorislav Petkov <bp@alien8.de>
      Tested-by: default avatarBorislav Petkov <bp@alien8.de>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      58c95070
    • Paolo Bonzini's avatar
      KVM: x86: use correct page table format to check nested page table reserved bits · 6fec2144
      Paolo Bonzini authored
      Intel CPUID on AMD host or vice versa is a weird case, but it can
      happen.  Handle it by checking the host CPU vendor instead of the
      guest's in reset_tdp_shadow_zero_bits_mask.  For speed, the
      check uses the fact that Intel EPT has an X (executable) bit while
      AMD NPT has NX.
      Reported-by: default avatarBorislav Petkov <bp@alien8.de>
      Tested-by: default avatarBorislav Petkov <bp@alien8.de>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      6fec2144
    • Paolo Bonzini's avatar
      KVM: svm: do not call kvm_set_cr0 from init_vmcb · 79a8059d
      Paolo Bonzini authored
      kvm_set_cr0 may want to call kvm_zap_gfn_range and thus access the
      memslots array (SRCU protected).  Using a mini SRCU critical section
      is ugly, and adding it to kvm_arch_vcpu_create doesn't work because
      the VMX vcpu_create callback calls synchronize_srcu.
      
      Fixes this lockdep splat:
      
      ===============================
      [ INFO: suspicious RCU usage. ]
      4.3.0-rc1+ #1 Not tainted
      -------------------------------
      include/linux/kvm_host.h:488 suspicious rcu_dereference_check() usage!
      
      other info that might help us debug this:
      rcu_scheduler_active = 1, debug_locks = 0
      1 lock held by qemu-system-i38/17000:
       #0:  (&(&kvm->mmu_lock)->rlock){+.+...}, at: kvm_zap_gfn_range+0x24/0x1a0 [kvm]
      
      [...]
      Call Trace:
       dump_stack+0x4e/0x84
       lockdep_rcu_suspicious+0xfd/0x130
       kvm_zap_gfn_range+0x188/0x1a0 [kvm]
       kvm_set_cr0+0xde/0x1e0 [kvm]
       init_vmcb+0x760/0xad0 [kvm_amd]
       svm_create_vcpu+0x197/0x250 [kvm_amd]
       kvm_arch_vcpu_create+0x47/0x70 [kvm]
       kvm_vm_ioctl+0x302/0x7e0 [kvm]
       ? __lock_is_held+0x51/0x70
       ? __fget+0x101/0x210
       do_vfs_ioctl+0x2f4/0x560
       ? __fget_light+0x29/0x90
       SyS_ioctl+0x4c/0x90
       entry_SYSCALL_64_fastpath+0x16/0x73
      Reported-by: default avatarBorislav Petkov <bp@alien8.de>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      79a8059d
    • David S. Miller's avatar
      Merge branch 'phy-mdio-refcnt' · b626ef01
      David S. Miller authored
      Russell King says:
      
      ====================
      Phy, mdiobus, and netdev struct device fixes
      
      The third version of this series fixes the build error which David
      identified, and drops the broken changes for the Cavium Thunger BGX
      ethernet driver as this driver requires some complex changes to
      resolve the leakage - and this is best done by people who can test
      the driver.
      
      Compared to v2, the only patch which has changed is patch 6
        "net: fix phy refcounting in a bunch of drivers"
      
      I _think_ I've been able to build-test all the drivers touched by
      that patch to some degree now, though several of them needed the
      Kconfig hacked to allow it (not all had || COMPILE_TEST clause on
      their dependencies.)
      
      Previous cover letters below:
      
      This is the second version of the series, with the comments David had
      on the first patch fixed up.  Original series description with updated
      diffstat below.
      
      While looking at the DSA code, I noticed we have a
      of_find_net_device_by_node(), and it looks like users of that are
      similarly buggy - it looks like net/dsa/dsa.c is the only user.  Fix
      that too.
      
      Hi,
      
      While looking at the phy code, I identified a number of weaknesses
      where refcounting on device structures was being leaked, where
      modules could be removed while in-use, and where the fixed-phy could
      end up having unintended consequences caused by incorrect calls to
      fixed_phy_update_state().
      
      This patch series resolves those issues, some of which were discovered
      with testing on an Armada 388 board.  Not all patches are fully tested,
      particularly the one which touches several network drivers.
      
      When resolving the struct device refcounting problems, several different
      solutions were considered before settling on the implementation here -
      one of the considerations was to avoid touching many network drivers.
      The solution here is:
      
      	phy_attach*() - takes a refcount
      	phy_detach*() - drops the phy_attach refcount
      
      Provided drivers always attach and detach their phys, which they should
      already be doing, this should change nothing, even if they leak a refcount.
      
      	of_phy_find_device() and of_* functions which use that take
      	a refcount.  Arrange for this refcount to be dropped once
      	the phy is attached.
      
      This is the reason why the previous change is important - we can't drop
      this refcount taken by of_phy_find_device() until something else holds
      a reference on the device.  This resolves the leaked refcount caused by
      using of_phy_connect() or of_phy_attach().
      
      Even without the above changes, these drivers are leaking by calling
      of_phy_find_device().  These drivers are addressed by adding the
      appropriate release of that refcount.
      
      The mdiobus code also suffered from the same kind of leak, but thankfully
      this only happened in one place - the mdio-mux code.
      
      I also found that the try_module_get() in the phy layer code was utterly
      useless: phydev->dev.driver was guaranteed to always be NULL, so
      try_module_get() was always being called with a NULL argument.  I proved
      this with my SFP code, which declares its own MDIO bus - the module use
      count was never incremented irrespective of how I set the MDIO bus up.
      This allowed the MDIO bus code to be removed from the kernel while there
      were still PHYs attached to it.
      
      One other bug was discovered: while using in-band-status with mvneta, it
      was found that if a real phy is attached with in-band-status enabled,
      and another ethernet interface is using the fixed-phy infrastructure, the
      interface using the fixed-phy infrastructure is configured according to
      the other interface using the in-band-status - which is caused by the
      fixed-phy code not verifying that the phy_device passed in is actually
      a fixed-phy device, rather than a real MDIO phy.
      
      Lastly, having mdio_bus reversing phy_device_register() internals seems
      like a layering violation - it's trivial to move that code to the phy
      device layer.
      ====================
      Tested-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b626ef01
    • Russell King's avatar
      net: fix net_device refcounting · 9861f720
      Russell King authored
      of_find_net_device_by_node() uses class_find_device() internally to
      lookup the corresponding network device.  class_find_device() returns
      a reference to the embedded struct device, with its refcount
      incremented.
      
      Add a comment to the definition in net/core/net-sysfs.c indicating the
      need to drop this refcount, and fix the DSA code to drop this refcount
      when the OF-generated platform data is cleaned up and freed.  Also
      arrange for the ref to be dropped when handling errors.
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9861f720
    • Russell King's avatar
      phy: add phy_device_remove() · 38737e49
      Russell King authored
      Add a phy_device_remove() function to complement phy_device_register(),
      which undoes the effects of phy_device_register() by removing the phy
      device from visibility, but not freeing it.
      
      This allows these details to be moved out of the mdio bus code into
      the phy code where this action belongs.
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      38737e49
    • Russell King's avatar
      phy: fixed-phy: properly validate phy in fixed_phy_update_state() · d618bf2b
      Russell King authored
      Validate that the phy_device passed into fixed_phy_update_state() is a
      fixed-phy device before walking the list of phys for a fixed phy at the
      same address.
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d618bf2b
    • Russell King's avatar
      net: fix phy refcounting in a bunch of drivers · 04d53b20
      Russell King authored
      of_phy_find_device() increments the phy struct device refcount, which
      we need to properly balance.  Add code to network drivers using this
      function to ensure that the struct device refcount is correctly
      balanced.
      
      For xgene, looking back in the history, we should be able to use
      of_phy_connect() with a zero flags argument for the DT case as this is
      how the driver used to operate prior to de7b5b3d ("net: eth: xgene:
      change APM X-Gene SoC platform ethernet to support ACPI").
      
      This leaves the Cavium Thunder BGX unfixed; fixing this driver is a
      complicated task, one which the maintainers need to be involved with.
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      04d53b20
    • Russell King's avatar
      of_mdio: fix MDIO phy device refcounting · f018ae7a
      Russell King authored
      bus_find_device() is defined as:
      
       * This is similar to the bus_for_each_dev() function above, but it
       * returns a reference to a device that is 'found' for later use, as
       * determined by the @match callback.
      
      and it does indeed return a reference-counted pointer to the device:
      
              while ((dev = next_device(&i)))
                      if (match(dev, data) && get_device(dev))
                                              ^^^^^^^^^^^^^^^
                              break;
              klist_iter_exit(&i);
              return dev;
      
      What that means is that when we're done with the struct device, we must
      drop that reference.  Neither of_phy_connect() nor of_phy_attach() did
      this when phy_connect_direct() or phy_attach_direct() failed.
      
      With our previous patch, phy_connect_direct() and phy_attach_direct()
      take a new refcount on the phy device when successful, so we can drop
      our local reference immediatley after these functions, whether or not
      they succeeded.
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Acked-by: default avatarRob Herring <robh@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f018ae7a
    • Russell King's avatar
      phy: add proper phy struct device refcounting · 7322967b
      Russell King authored
      Take a refcount on the phy struct device when the phy device is attached
      to a network device, and drop it after it's detached.  This ensures that
      a refcount is held on the phy device while the device is being used by
      a network device, thereby preventing the phy_device from being
      unexpectedly kfree()'d by phy_device_release().
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7322967b
    • Russell King's avatar
      phy: fix mdiobus module safety · 3e3aaf64
      Russell King authored
      Re-implement the mdiobus module refcounting to ensure that we actually
      ensure that the mdiobus module code does not go away while we might call
      into it.
      
      The old scheme using bus->dev.driver was buggy, because bus->dev is a
      class device which never has a struct device_driver associated with it,
      and hence the associated code trying to obtain a refcount did nothing
      useful.
      
      Instead, take the approach that other subsystems do: pass the module
      when calling mdiobus_register(), and record that in the mii_bus struct.
      When we need to increment the module use count in the phy code, use
      this stored pointer.  When the phy is deteched, drop the module
      refcount, remembering that the phy device might go away at that point.
      
      This doesn't stop the mii_bus going away while there are in-use phys -
      it merely stops the underlying code vanishing.
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3e3aaf64
    • Russell King's avatar
      net: dsa: fix of_mdio_find_bus() device refcount leak · e496ae69
      Russell King authored
      Current users of of_mdio_find_bus() leak a struct device refcount, as
      they fail to clean up the reference obtained inside class_find_device().
      
      Fix the DSA code to properly refcount the returned MDIO bus by:
      1. taking a reference on the struct device whenever we assign it to
         pd->chip[x].host_dev.
      2. dropping the reference when we overwrite the existing reference.
      3. dropping the reference when we free the data structure.
      4. dropping the initial reference we obtained after setting up the
         platform data structure, or on failure.
      
      In step 2 above, where we obtain a new MDIO bus, there is no need to
      take a reference on it as we would only have to drop it immediately
      after assignment again, iow:
      
      	put_device(cd->host_dev);	/* drop original assignment ref */
      	cd->host_dev = get_device(&mdio_bus_switch->dev); /* get our ref */
      	put_device(&mdio_bus_switch->dev); /* drop of_mdio_find_bus ref */
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e496ae69
    • Russell King's avatar
      phy: fix of_mdio_find_bus() device refcount leak · a1364421
      Russell King authored
      of_mdio_find_bus() leaks a struct device refcount, caused by using
      class_find_device() and not realising that the device reference has
      its refcount incremented:
      
       * Note, you will need to drop the reference with put_device() after use.
      ...
              while ((dev = class_dev_iter_next(&iter))) {
                      if (match(dev, data)) {
                              get_device(dev);
                              break;
                      }
      
      Update the comment, and arrange for the phy code to drop this refcount
      when disposing of a reference to it.
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a1364421
    • Linus Torvalds's avatar
      Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux · ced255c0
      Linus Torvalds authored
      Pull thermal management fixes from Zhang Rui:
      
       - Power allocator governor changes to allow binding on thermal zones
         with missing power estimates information.  From Javi Merino.
      
       - Add compile test flags on thermal drivers that allow it without
         producing compilation errors.  From Eduardo Valentin.
      
       - Fixes around memory allocation on cpu_cooling.  From Javi Merino.
      
       - Fix on db8500 cpufreq code to allow autoload.  From Luis de
         Bethencourt.
      
       - Maintainer entries for cpu cooling device
      
      * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
        thermal: power_allocator: exit early if there are no cooling devices
        thermal: power_allocator: don't require tzp to be present for the thermal zone
        thermal: power_allocator: relax the requirement of two passive trip points
        thermal: power_allocator: relax the requirement of a sustainable_power in tzp
        thermal: Add a function to get the minimum power
        thermal: cpu_cooling: free power table on error or when unregistering
        thermal: cpu_cooling: don't call kcalloc() under rcu_read_lock
        thermal: db8500_cpufreq_cooling: Fix module autoload for OF platform driver
        thermal: cpu_cooling: Add MAINTAINERS entry
        thermal: ti-soc: Kconfig fix to avoid menu showing wrongly
        thermal: ti-soc: allow compile test
        thermal: qcom_spmi: allow compile test
        thermal: exynos: allow compile test
        thermal: armada: allow compile test
        thermal: dove: allow compile test
        thermal: kirkwood: allow compile test
        thermal: rockchip: allow compile test
        thermal: spear: allow compile test
        thermal: hisi: allow compile test
        thermal: Fix thermal_zone_of_sensor_register to match documentation
      ced255c0
    • Linus Torvalds's avatar
      Merge tag 'devicetree-fixes-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux · 4401555a
      Linus Torvalds authored
      Pull DeviceTree fixes from Rob Herring:
       - Silence bogus warning for of_irq_parse_pci
       - Fix typo in ARM idle-states binding doc and dts files
       - Various minor binding documentation updates
      
      * tag 'devicetree-fixes-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
        Documentation: arm: Fix typo in the idle-states bindings examples
        gpio: mention in DT binding doc that <name>-gpio is deprecated
        of_pci_irq: Silence bogus "of_irq_parse_pci() failed ..." messages.
        devicetree: bindings: Extend the bma180 bindings with bma250 info
        of: thermal: Mark cooling-*-level properties optional
        of: thermal: Fix inconsitency between cooling-*-state and cooling-*-level
        Docs: dt: add #msi-cells to GICv3 ITS binding
        of: add vendor prefix for Socionext Inc.
      4401555a
  5. 24 Sep, 2015 5 commits
    • Matt Bennett's avatar
      ip6_tunnel: Reduce log level in ip6_tnl_err() to debug · 17a10c92
      Matt Bennett authored
      Currently error log messages in ip6_tnl_err are printed at 'warn'
      level. This is different to other tunnel types which don't print
      any messages. These log messages don't provide any information that
      couldn't be deduced with networking tools. Also it can be annoying
      to have one end of the tunnel go down and have the logs fill with
      pointless messages such as "Path to destination invalid or inactive!".
      
      This patch reduces the log level of these messages to 'dbg' level to
      bring the visible behaviour into line with other tunnel types.
      Signed-off-by: default avatarMatt Bennett <matt.bennett@alliedtelesis.co.nz>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      17a10c92
    • Lorenzo Pieralisi's avatar
      Documentation: arm: Fix typo in the idle-states bindings examples · a13f18f5
      Lorenzo Pieralisi authored
      The idle-states bindings mandate that the entry-method string
      in the idle-states node must be "psci" for ARM v8 64-bit systems,
      but the examples in the bindings report a wrong entry-method string.
      Owing to this typo, some dts in the kernel wrongly defined the
      entry-method property, since they likely cut and pasted the example
      definition without paying attention to the bindings definitions.
      
      This patch fixes the typo in the DT idle states bindings examples and
      respective dts in the kernel so that the bindings and related dts
      files are made compliant.
      Signed-off-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      Cc: Howard Chen <howard.chen@linaro.org>
      Cc: Rob Herring <robh+dt@kernel.org>
      Cc: Mark Rutland <mark.rutland@arm.com>
      Cc: Heiko Stuebner <heiko@sntech.de>
      Signed-off-by: default avatarRob Herring <robh@kernel.org>
      a13f18f5
    • Javier Martinez Canillas's avatar
      gpio: mention in DT binding doc that <name>-gpio is deprecated · e7ae65ce
      Javier Martinez Canillas authored
      The gpiolib supports parsing DT properties of the form <name>-gpio but it
      was only added for compatibility with older DT bindings that got it wrong
      and should not be used in newer bindings.
      
      The commit that added support for this was:
      
      dd34c37a ("gpio: of: Allow -gpio suffix for property names")
      
      but didn't update the documentation to explain this so it's been a source
      of confusion. So let's make this clear in the GPIO DT binding doc.
      Signed-off-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
      Signed-off-by: default avatarRob Herring <robh@kernel.org>
      e7ae65ce
    • Linus Torvalds's avatar
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · cc8b8fae
      Linus Torvalds authored
      Pull drm fixes from Dave Airlie:
       "Most of the GPU drivers people were at XDC last week, so I didn't get
        much to send, so I let it rollover until this week.
      
        Also Alex was away for 3 weeks so amdgpu/radeon got a bit more stuff
        than usual in one go.
      
        I've been trying to figure out some 4.2 issues with i915 still (that
        are fixed in 4.3, but bisecting ends up in a merge commit).  Hopefully
        next week I or i915 people can work that out"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (46 commits)
        drm: Allow also control clients to check the drm version
        drm/vmwgfx: Fix uninitialized return in vmw_kms_helper_dirty()
        drm/vmwgfx: Fix uninitialized return in vmw_cotable_unbind()
        drm/layerscape: fix handling fsl_dcu_drm_plane_index result
        drm/mgag200: Fix driver_load error handling
        drm/mgag200: Fix error handling paths in fbdev driver
        drm/qxl: only report first monitor as connected if we have no state
        drm/radeon: add quirk for MSI R7 370
        drm/amdgpu: Sprinkle drm_modeset_lock_all to appease locking checks
        drm/radeon: Sprinkle drm_modeset_lock_all to appease locking checks
        drm/amdgpu: sync ce and me with SWITCH_BUFFER(2)
        drm/amdgpu: integer overflow in amdgpu_mode_dumb_create()
        drm/amdgpu: info leak in amdgpu_gem_metadata_ioctl()
        drm/amdgpu: integer overflow in amdgpu_info_ioctl()
        drm/amdgpu: unwind properly in amdgpu_cs_parser_init()
        drm/amdgpu: Fix max_vblank_count value for current display engines
        drm/amdgpu: use kmemdup rather than duplicating its implementation
        drm/amdgpu: fix UVD suspend and resume for VI APU
        drm/amdgpu: fix the UVD suspend sequence order
        drm/amdgpu: make UVD handle checking more strict
        ...
      cc8b8fae
    • David S. Miller's avatar
      Merge tag 'mac80211-for-davem-2015-09-22' of... · deccbe80
      David S. Miller authored
      Merge tag 'mac80211-for-davem-2015-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
      
      Johannes Berg says:
      
      ====================
      Just two small fixes:
       * VHT MCS mask array overrun, reported by Dan Carpenter
       * reset CQM history to always get a notification, from Sara Sharon
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      deccbe80