The variable is_cck_rate is used for boolean values, so change the
type from u8 to bool. The initializations to zero and use of ternary
operator in the assignments are unnecessary, remove them as well.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the variable isCCKrate to avoid CamelCase.
isCCKrate -> is_cck_rate
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the variable Max_spatial_stream to avoid CamelCase.
Max_spatial_stream -> max_spatial_stream
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use clamp() to simplify code in odm_evm_db_to_percentage().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following tasks were completed or not the right solution:

1/2- Not the proper solution, we should register a platform device in
vchiq the same way it's done with bcm2835-camera as commented here:
https://lkml.org/lkml/2018/10/16/1131

2/3- Fixed by Takashi Iwai here: https://lkml.org/lkml/2018/9/4/587

Also, adds a new task as per mailing list conversation.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It was called bcm2835_alsa0_driver, that "0" didn't mean much.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There will only be one probe function, there is no use for appendig
"_dt" the end of the name.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In this case explicitly naming the union doesn't help overall code
comprehension and clutters it.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When it comes to declaring variables it's preferred, when possible, to
use an inverted tree organization scheme.

Also, removes some comments that were useless.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The memory is being allocated with devres_alloc(), wich ultimately uses
__GFP_ZERO to call kmalloc. We don't need to zero the memory area again
in bcm2835-audio.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The device communicates with the audio core using FOURCC codes. The
driver was generating them using different macros/expressions. We now
use the same macro to create them and centralize all the definitions.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes two line ending with parenthesis, which did
not conform to the linux kernel coding style.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"Exiting" instead of "Exitting"
Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add spaces around '+' to correct the following checkpath.pl warnings:

WARNING: line over 80 characters
+                       write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));

WARNING: line over 80 characters
+                       memcpy(ajRemain, pSrcbuf+ul4BytesPerScan, ulBytesRemain);
Signed-off-by: Laís Pessine do Carmo <laispc19@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename struct _rt_firmare_seg_container to _fw_seg_container to match
the typedef name of this structure. Also removes the spelling mistake
of 'firmare'.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Trivial fix to clean up indentation issues across the driver
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Trivial fix to clean up an indentation issue
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename fields in fw_priv struct from CamelCase to snake_case.
Reported by checkpatch.
Signed-off-by: Robert Eshleman <bobbyeshleman@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Trivial fix to common spelling mistakes in some rtl* drivers
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup extra line found by checkpatch.pl
Signed-off-by: Jeeeun Evans <jeeeunevans@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct the following warning from checkpatch.pl:

WARNING: Missing a blank line after declarations
+		struct msdc_host *host = mmc_priv(mmc);
+		msdc_pm(state, (void *)host);
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch warning by adding the SPDX license identifier.
Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Userspace mode-setting (and thus also VESA) is not supported together with
modesetting. KMS userspace apps not properly marking the framebuffer as
dirty are also not supported.

So stop trying to accommodate this and simply enable accel
once at driver init.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the files contain a MIT license header, replace this with:
SPDX-License-Identifier: MIT
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some comments where still using docbook style comments, move these
either over to kerneldoc, or just make them regular comments.

Also remove a bunch of obsolete comments.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Switch to the more complete vbox_err.h file from include/linux which got
added with the merging of the vboxguest driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On DPMS off we get a call to vbx_crtc_atomic_disable, followed by
a call to vbox_primary_atomic_update, at which point crtc_state->enable
is 0 and crtc_state->mode has been zero-ed. On a 0 width/height
vbox_do_modeset() falls back to 640x480, so this causes the guest Window
(its "monitor") to resize to 640x480 (and become black).

This commit makes us not look at crtc_state->mode when crtc_state->enable
is not set, so that we keep the old mode and just make the window go black.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Atomic modesetting drivers should never check crtc_state->active directly,
instead check crtc_state->enable.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add missing SPDX License Identifier to the source and header files.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the mail address from the copyright notice as it may change in
the future. Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the bit assignment with the preferred BIT macro. Reported by
checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the arguments of spk_serial_synth_immediate and the
spk_ttyio_synth_immediate to adhere to 80 chars limit coding standards.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the arguments one line below to remove the warning of the 80 chars
limit. Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add spaces around minus operator. Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add missing SPDX License Identifier. Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix coding style alignment issues detected by checkpatch.pl
Use ! for NULL test rather than explicitly comparing to NULL.
Signed-off-by: Bhagyashri P. Dighole <digholebhagyashri@gmail.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix coding style alignment issues detected by checkpatch.pl
Matched alignments with parenthesis.
Signed-off-by: Bhagyashri P. Dighole <digholebhagyashri@gmail.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gb_loopback_device::list_op_async is never used except for the
LIST_INIT. The ::list field appears to have a few more uses, but on
closer inspection the linked list of struct gb_loopbacks that it heads
is never used for anything, so there's no reason to maintain it, much
less to keep it sorted.
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is actually no need at all to d_rehash() for the root dentry
as Al pointed out, fix it.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Trivial fix to typo in function name, rename it to
rtw_sctx_chk_warning_status.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>