An error occurred fetching the project authors.
- 06 Jun, 2013 3 commits
-
-
Takashi Iwai authored
When a codec is powered off, some systems don't respond properly after D3 FG transition, while the driver still expects the response and tries to fall back to different modes (polling and single-cmd). When the fallback happens, the driver stays in that mode, and falling back to the single-cmd mode means it'll loose the unsol event handling, too. The unresponsiveness at D3 isn't too serious, thus this fallback is mostly superfluous. We can gracefully ignore the error there so that the driver keeps the normal operation mode. This patch adds a new bit flag for codec read/write, set in the power transition stage, which is notified to the controller driver via a new bus->no_response_fallback flag. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
snd_hda_codec_read(), snd_hda_codec_write() & co take the argument "direct" that indicates whether the given NID is a direct reference or an indirect reference. However, the indirect reference is practically unimplemented and never exists. And moreover, we don't need the indication of indirect reference at this high level, as NID can be represented in 16bit values at this point. Meanwhile, there are some cases where it'd be nice to give some operational options to these functions. So, we can reuse this argument as a new bit flag! Pretty frugal, eh? All callers so far pass zero to this argument, thus there is no behavior change by this replacement. The real usage of this new bit option will be added in the following patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Currently HDMI codec driver sets the hard dependency (reverse selection) on CONFIG_SND_DYNAMIC_MINORS because the recent codecs may support more than two PCMs. But, this doesn't mean that we need always this option, since there can be a single PCM stream even with the modern codecs. This patch drops the hard dependency again but give more sensible error message when no enough PCMs are available due to the lack of this option. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 05 Jun, 2013 4 commits
-
-
Takashi Iwai authored
Just a minor clean up. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
* for-linus: (778 commits) ALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270 ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface ALSA: hda/via - Clean up duplicated codes ALSA: hda/via - Fix wrongly cleared pins after suspend on VT1802 ALSA: hda - Add keep_eapd_on flag to generic parser ALSA: hda - Allow setting automute/automic hooks after parsing ALSA: hda/via - Disable broken dynamic power control ALSA: usb-audio: fix Roland/Cakewalk UM-3G support ALSA: hda - Add headset quirk for two Dell machines ALSA: hda - add dock support for Thinkpad T431s ALSA: sis7019: fix error return code in sis_chip_create() ASoC: cs42l52: fix default value for MASTERA_VOL. ASoC: wm8994: check for array index returned ASoC: wm8994: Fix reporting of accessory removal on WM8958 ASoC: wm8994: use the correct pointer to get the control value Linux 3.10-rc3 ipc/sem.c: Fix missing wakeups in do_smart_update_queue() score: remove redundant kcore_list entries ASoC: wm5110: Correct DSP4R Mixer control name ARC: lazy dcache flush broke gdb in non-aliasing configs ...
-
Anisse Astier authored
This fixes the internal and external mic on Ordissimo EVE2, also known as Malata PC-B1303. We still don't know how to detect mic jack like Realtek's windows driver. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
USB audio driver spews an error message when probing Logitech HD webcam c270: ALSA mixer.c:1300 usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong. ALSA mixer.c:1304 usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1 Obviously the device needs a fixed volume resolution (cval->res = 384) like other Logitech devices. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=821735Reported-and-tested-by: Cristian Rodríguez <crrodriguez@opensuse.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 04 Jun, 2013 1 commit
-
-
Takashi Iwai authored
... instead of applying to all interfaces. Reference: http://forums.gentoo.org/viewtopic-p-6886404.html Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 03 Jun, 2013 6 commits
-
-
Takashi Iwai authored
The previous commit was written in the way to make the backport to 3.9.y easier, and left the duplicated open codes intentionally. Now let's clean up the duplicated codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
VIA driver has a special suspend handling only for VT1802 to reduce the pop noise. During the transition to the generic parser, the behavior of snd_hda_set_pin_ctl() was also changed to modify the cached values, too. And this caused a regression where the pin is still cleared even after the resume (including the resume from power save), resulting in the silent output. The fix is simply to replace snd_hda_set_pin_ctl() with the explicit call of snd_hda_codec_write() again. Reported-by: Alex Riesen <raa.lkml@gmail.com> Cc: <stable@vger.kernel.org> [v3.9] Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
VT1802 codec seems to reset EAPD of other pins in the hardware level, and this was another reason of the silent headphone output on some machines. As a workaround, introduce a new flag indicating to keep the EPAD on to the generic parser, and set it in patch_via.c. Reported-by: Alex Riesen <raa.lkml@gmail.com> Cc: <stable@vger.kernel.org> [v3.9] Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Some codec drivers (VIA codecs and some Realtek fixups) set the automute and automic hooks after calling snd_hda_gen_parse_auto_config(). In the current code, the hook pointers are referred only in snd_hda_gen_parse_auto_config() and passed to snd_hda_jack_detect_enable_callback(), thus changing the hook values won't change the actually called callbacks properly. This patch fixes this bug by setting the static functions as the primary callback functions for the jack detection, and let them calling the appropriate hooks dynamically. Cc: <stable@vger.kernel.org> [v3.9] Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Since the transition to the generic parser, the actual routes used there don't match always with the assumed static paths in some set_widgets_power_state callbacks. This results in the wrong power setup in the end. As a temporary workaround, we need to disable the calls together with the non-functional dynamic power control enum. Reported-by: Alex Riesen <raa.lkml@gmail.com> Cc: <stable@vger.kernel.org> [v3.9] Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Clemens Ladisch authored
Commit 927c9423 (ALSA: usb-audio: add Edirol UM-3G support) used a wrong quirk type, which would make the driver refuse to attach with the error message "MIDIStreaming interface descriptor not found". Cc: <stable@vger.kernel.org> # 3.3 and later Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 31 May, 2013 7 commits
-
-
Adrian Knoth authored
Similarly to MADI, WordClock can also be at SingleSpeed while the card is actually working at twice or four times this rate. If so, multiply the base rate accordingly. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
When the DoubleSpeed or QuadSpeed bit is set, the SingleSpeed frequency has to be multiplied accordingly. Since this functionality will be required at least twice, refactor it into a separate function. The second reference to the newly introduced hdspm_rate_multiplier() will be in a separate commit. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
Allow WordClock input rates of 128, 176.4 and 192kHz. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
David Henningsson authored
This quirk is required for the headset mic to work on these two machines. BugLink: https://bugs.launchpad.net/bugs/1186170Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Ondrej Zary authored
Add support for TEA5757 tuner on MediaForte M56VAP sound+modem+radio card. The GPIO connection type is automatically detected (like snd-fm801 driver). Also add a safety subsystem vendor check to skip radio detection if vendor differs from ESS (so we don't touch GPIOs on laptops). Tested with SF64-PCE2 and M56VAP cards. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Ebben Aries authored
Add a model/fixup string "lenovo-dock", for Thinkpad T431s, to allow sound in docking station. Tested on Lenovo T431s with ThinkPad Mini Dock Plus Series 3 Signed-off-by: Ebben Aries <earies@dscp.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wei Yongjun authored
Fix to return a negative error code in the pci_set_dma_mask() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 29 May, 2013 5 commits
-
-
Takashi Iwai authored
Merge tag 'asoc-v3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v3.10 A series of driver specific updates, none particularly critical, plus one fix to the compressed API code to handle capture streams properly which is very safe for mainline as there's no current users.
-
Takashi Iwai authored
A few calls are still left in parport drivers after this commit, which I'm not quite sure yet. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Similarly like the previous commit for PCI drivers, remove dev_set_drvdata(NULL) and pnp_set_drvdata(NULL) calls in ISA drivers now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Only kahlua.c has it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
As drvdata is cleared to NULL at probe failure or at removal by the driver core, we don't have to call pci_set_drvdata(pci, NULL) any longer in each driver. The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in hda_intel.c. Since this function itself releases the card instance, we need to clear drvdata here as well, so that it won't be released doubly in the remove callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 28 May, 2013 11 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Nicolas Schichan authored
The default register value for MASTERA_VOL is 0x00, the same as MASTERB_VOL. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
Vinod Koul authored
The array 'drc_cfg' of size 3 may use index value -22 (EINVAL) The array 'retune_mobile_cfg' of size 3 may use index value -22 (EINVAL) Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
During recent refactoring the code to report removal when MICDET reports an absent microphone was removed, causing problems for systems which rely solely on the MICDET for this functionality. Restore it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Vinod Koul authored
Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Takashi Iwai authored
The newer HP laptops have SSID 103c:20xx and 103c:21xx, and these usually have the mic-mute LED on Fn-F8. Let's enable it, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 26 May, 2013 3 commits
-
-
Linus Torvalds authored
-
Manfred Spraul authored
do_smart_update_queue() is called when an operation (semop, semctl(SETVAL), semctl(SETALL), ...) modified the array. It must check which of the sleeping tasks can proceed. do_smart_update_queue() missed a few wakeups: - if a sleeping complex op was completed, then all per-semaphore queues must be scanned - not only those that were modified by *sops - if a sleeping simple op proceeded, then the global queue must be scanned again And: - the test for "|sops == NULL) before scanning the global queue is not required: If the global queue is empty, then it doesn't need to be scanned - regardless of the reason for calling do_smart_update_queue() The patch is not optimized, i.e. even completing a wait-for-zero operation causes a rescan. This is done to keep the patch as simple as possible. Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: - Stable fix to prevent an rpc_task wakeup race - Fix a NFSv4.1 session drain deadlock - Fix a NFSv4/v4.1 mount regression when not running rpc.gssd - Ensure auth_gss pipe detection works in namespaces - Fix SETCLIENTID fallback if rpcsec_gss is not available * tag 'nfs-for-3.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix SETCLIENTID fallback if GSS is not available SUNRPC: Prevent an rpc_task wakeup race NFSv4.1 Fix a pNFS session draining deadlock SUNRPC: Convert auth_gss pipe detection to work in namespaces SUNRPC: Faster detection if gssd is actually running SUNRPC: Fix a bug in gss_create_upcall
-