- 12 Sep, 2005 40 commits
-
-
Andi Kleen authored
No-one needs it then Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
This leads to bootmem allocating first from node 0 instead of from the last node. This avoids swiotlb allocating on the last node, which doesn't really work on a machine with >4GB. Note: there is a better patch around from someone else that gets rid of the pgdat list completely. Signed-off-by:
-
Andi Kleen authored
PCI_DMA_BUS_IS_PHYS has to be zero even when the GART IOMMU is disabled and the swiotlb is used. Otherwise the block layer does unnecessary double bouncing. Signed-off-by:
-
Andi Kleen authored
Originally from Stuart Hayes. When setting up the APIC for the Uniprocessor kernel don't assume the CPU has an APIC ID of zero. This fixes boot with the UP kernel on Dell PowerEdge 6800/6850 4way systems. Cc: Stuart.Hayes@dell.com Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Andi Kleen authored
In particular on systems where the local APIC space and node space is very different from the Linux CPU number space. Previously the older NUMA setup code directly parsing the K8 northbridge registers had some issues on 8 socket or dual core systems. This patch fixes them. This is mainly done by fixing some confusion between Linux CPU numbers and local APIC ids. We now pass the local APIC IDs to later code, which avoids mismatches. Also add some heuristics to detect cases where the Hypertransport nodeids and the local APIC IDs don't match, but are shifted by a constant offset. This is still all quite hackish, hopefully BIOS writers fill in correct SRATs instead. Signed-off-by:
-
Andi Kleen authored
Suggested by someone I forgot who sorry. Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
Suresh Sidda <suresh.b.siddha@intel.com> Signed-off-by:
-
Andi Kleen authored
Do that later when the CPU boots. SRAT just stores the APIC<->Node mapping node. This fixes problems on systems where the order of SRAT entries does not match the MADT. Signed-off-by:
-
Andi Kleen authored
No functional changes Signed-off-by:
-
Andi Kleen authored
We used to disable them to work around a bug, but that is not needed anymore. Keeping them enabled avoids the NMI watchdog triggering in some cases. Signed-off-by:
-
Andi Kleen authored
Handles case where BIOS gives CPUs very large APIC numbers correctly. Signed-off-by:
-
Andi Kleen authored
No x86-64 chipset has these APICs. Signed-off-by:
-
Andi Kleen authored
This was just needed for the Numasaurus, which fortunately doesn't support x86-64 CPUs. Signed-off-by:
-
Andi Kleen authored
No x86-64 chipset has this bug Generated code doesn't change because it was always disabled. Signed-off-by:
-
Andi Kleen authored
We don't do workarounds for ancient hardware bugs. Signed-off-by:
-
Andi Kleen authored
Allow diskless booting. Signed-off-by:
-
Andi Kleen authored
Now that Greg implemented MCFG/_SEG support this shouldn't be needed anymore Cc: gregkh@suse.de Signed-off-by:
-
Paul Jackson authored
Optimize the deadlock avoidance check on the global cpuset semaphore cpuset_sem. Instead of adding a depth counter to the task struct of each task, rather just two words are enough, one to store the depth and the other the current cpuset_sem holder. Thanks to Nikita Danilov for the idea. Signed-off-by:
Paul Jackson <pj@sgi.com> [ We may want to change this further, but at least it's now a totally internal decision to the cpusets code ] Signed-off-by:
-
Evgeniy Polyakov authored
Remove w1 comments from crc16.h and move specific constants into w1_ds2433.c where they are used. Replace %d with %zd. Signed-off-by:
Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
..and only enable them for ia64. The functions are only valid when the whole system has been totally stopped and no scheduler activity is ongoing on any CPU, and interrupts are globally disabled. In other words, they aren't useful for anything else. So make sure that nobody can use them by mistake. Signed-off-by: -
Roland McGrath authored
Signed-off-by:
Roland McGrath <roland@redhat.com> Acked-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Anton Blanchard authored
ppc64_attention_msg and ppc64_dump_msg are not used so remove them. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Anton Blanchard authored
If the rtas start-cpu token doesnt exist then presume the cpu is already spinning. If it isnt we will catch it later on when the cpu doesnt respond. Signed-off-by:
-
Anton Blanchard authored
Fix up some badly indented code. Signed-off-by:
-
Anton Blanchard authored
A few xics cleanups: - Make some things static. - Be more consistent with error printing - interrupts are unsigned, error values are signed. Signed-off-by:
-
Anton Blanchard authored
Add hardware data breakpoint support. Signed-off-by:
-
Anton Blanchard authored
- Add PTRACE_GET_DEBUGREG/PTRACE_SET_DEBUGREG. The definition is as follows: /* * Get or set a debug register. The first 16 are DABR registers and the * second 16 are IABR registers. */ #define PTRACE_GET_DEBUGREG 25 #define PTRACE_SET_DEBUGREG 26 DABR == data breakpoint and IABR = instruction breakpoint in IBM speak. We could split out the IABR into 2 more ptrace calls but I figured there was no need and 16 DABR registers should be more than enough (POWER4/POWER5 have one). - Add 2 new SIGTRAP si_codes: TRAP_HWBKPT and TRAP_BRANCH. I couldnt find any standards on either of these so I copied what ia64 is doing. Again this might be better placed in include/asm-generic/siginfo.h Signed-off-by:
-
Anton Blanchard authored
Fix up some whitespace issues in ptrace32.c Signed-off-by:
-
Anton Blanchard authored
- Remove the PPC_REG* defines - Wrap some more stuff with ifdef __KERNEL__ - Add missing PT_TRAP, PT_DAR, PT_DSISR defines - Add PTRACE_GETEVRREGS/PTRACE_SETEVRREGS, even though we dont use it on ppc64 we dont want to allocate them for something else. Signed-off-by:
-
Robert Jennings authored
The ptrace get and set methods for VMX/Altivec registers present in the ppc tree were missing for ppc64. This patch adds the 32-bit and 64-bit methods. Updated with the suggestions from Anton following the lines of his code snippet. Added: - flush_altivec_to_thread calls as suggested by Anton - piecewise copy of structure to preserve 32-bit vrsave data as per Anton (I consolidated the 32 and 64bit versions with 2 helper macros - Anton) Signed-off-by:
Robert C Jennings <rcjenn@austin.ibm.com> Signed-off-by:
-
Paul Mackerras authored
This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: -
Antonino A. Daplas authored
Update i810fb documentation to describe new features and configuration changes. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Antonino A. Daplas authored
Reported by: Manuel Lauss <mano@roarinelk.homelinux.net> He was getting random initial video modes depending on the kernel configuration. His option line includes 'extvga'. The i810fb documentation describes the option 'extvga', however the driver accepts 'ext_vga'. Besides 'extvga' being ignored by i810fb, it also confuses the option parser of i810fb and assigns 'extvga' to 'mode_option'. This leads to an incorrect video mode at boot time. Signed-off-by:
-
Antonino A. Daplas authored
If i810fb successfully probed for the EDID, it will disregard the boot option parameters 'xres' and 'yres'. Fix this regression. Excellent testing done by Manuel Lauss <mano@roarinelk.homelinux.net>. Signed-off-by:
-
Antonino A. Daplas authored
Reported by: Manuel Lauss <mano@roarinelk.homelinux.net> compiled with CONFIG_FB_I810_I2C = n and CONFIG_FB_I810 = y it oopses at boot in file drivers/video/i810/i810_main.c:1884 ... Unable to handle kernel NULL pointer dereference at virtual address 00000054 printing eip: c02543c0 *pde = 00000000 Oops: 0000 [#1] last sysfs file: Modules linked in: CPU: 0 EIP: 0060:[<c02543c0>] Not tainted VLI EFLAGS: 00010286 (2.6.13-mm2) EIP is at i810fb_find_init_mode+0x53/0x93 eax: c113ddd4 ebx: c1194000 ecx: c04be2dd edx: c1194000 esi: c1194008 edi: c113ddd4 ebp: c1194240 esp: c113ddcc ds: 007b es: 007b ss: 0068 struct fb_monspecs *specs is initialized to NULL causing the oops. Signed-off-by:
-
Greg Ungerer authored
Create common start code for all 68360 based platforms that are loaded and run directly from RAM (as opposed to running from flash/ROM). This replaces the old specific startup code for each board. Signed-off-by:
Greg Ungerer <gerg@uclinux.com> Signed-off-by:
-
Greg Ungerer authored
Allow for differences in the SDRAM controller setup and GPIO pin setup of the 5270/1 and 5274/5 parts. With separate config options for each now this no longer needs to be board specific. Signed-off-by:
-
Greg Ungerer authored
Add support for the FEC ethernet driver of the Freescale 523x processor family to the FEC header definitions. Signed-off-by:
-
