- 07 Mar, 2012 1 commit
-
-
Olof Johansson authored
Merge tag 'rpmsg-fixes-and-more-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc into next/rpmsg Fixing and cleaning up several remoteproc and rpmsg issues. In addition, remoteproc's resource table is converted to a collection of type-value members, instead of a rigid array of homogeneous structs. This enables remoteproc to support registration of generic virtio devices, and not only a single VIRTIO_ID_RPMSG virtio device. But perhaps more importantly, the resource table overhaul makes it possible to easily extend it in the future without breaking older images (simply by defining a new member type, while continuing to support older types). * tag 'rpmsg-fixes-and-more-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: remoteproc: cleanup resource table parsing paths remoteproc: remove the hardcoded vring alignment remoteproc/omap: remove the mbox_callback limitation remoteproc: remove the single rpmsg vdev limitation remoteproc: safer boot/shutdown order remoteproc: remoteproc_rpmsg -> remoteproc_virtio remoteproc: resource table overhaul rpmsg: fix build warning when dma_addr_t is 64-bit rpmsg: fix published buffer length in rpmsg_recv_done rpmsg: validate incoming message length before propagating rpmsg: fix name service endpoint leak remoteproc/omap: two Kconfig fixes remoteproc: make sure we're parsing a 32bit firmware
-
- 06 Mar, 2012 7 commits
-
-
Ohad Ben-Cohen authored
rproc_handle_resources() looks for the resource table and then invokes a resource handler function which it took as a parameter. This works, but it's a bit unintuitive to follow. Instead of passing around function pointers, this patch changes rproc_handle_resource() to just find and return the resource table, and then the calling sites of rproc_handle_resource() invoke their resource handlers directly. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
-
Ohad Ben-Cohen authored
Remove the hardcoded vring alignment of 4096 bytes, and instead utilize tha vring alignment as specified in the resource table. This is needed for remote processors that have rigid memory requirement, and which have found the alignment of 4096 bytes to be excessively big. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
-
Ohad Ben-Cohen authored
Now that remoteproc supports any number of virtio devices, the previous sanity check in omap_rproc_mbox_callback doesn't make sense anymore. Remove that so we can start supporting multiple vdevs. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
-
Ohad Ben-Cohen authored
Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
-
Ohad Ben-Cohen authored
Boot the remote processor only after setting up the virtqueues, and shut it down before deleting them. Remote processors should obey virtio status changes, and therefore not manipulate/trigger the virtqueues while the virtio driver isn't ready, but it's just safer not to rely on that (plus a vq access might already be inflight while a vdev status is changed). We also don't have yet status change notifications, but that's a temporary limitation. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
-
Ohad Ben-Cohen authored
At this point remoteproc can only register a single VIRTIO_ID_RPMSG virtio device. This limitation is going away soon: remoteproc is getting support for registering any number of virtio devices and of any type (as published by the firmware of the remote processor). Rename remoteproc_rpmsg.c to remoteproc_virtio.c in preparation of this generalization work. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
-
Ohad Ben-Cohen authored
The resource table is an array of 'struct fw_resource' members, where each resource entry is expressed as a single member of that array. This approach got us this far, but it has a few drawbacks: 1. Different resource entries end up overloading the same members of 'struct fw_resource' with different meanings. The resulting code is error prone and hard to read and maintain. 2. It's impossible to extend 'struct fw_resource' without breaking the existing firmware images (and we already want to: we can't introduce the new virito device resource entry with the current scheme). 3. It doesn't scale: 'struct fw_resource' must be as big as the largest resource entry type. As a result, smaller resource entries end up utilizing only small part of it. This is fixed by defining a dedicated structure for every resource type, and then converting the resource table to a list of type-value members. Instead of a rigid array of homogeneous structs, the resource table is turned into a collection of heterogeneous structures. This way: 1. Resource entries consume exactly the amount of bytes they need. 2. It's easy to extend: just create a new resource entry structure, and assign it a new type. 3. The code is easier to read and maintain: the structures' members names are meaningful. While we're at it, this patch has several other resource table changes: 1. The resource table gains a simple header which contains the number of entries in the table and their offsets within the table. This makes the parsing code simpler and easier to read. 2. A version member is added to the resource table. Should we change the format again, we'll bump up this version to prevent breakage with existing firmware images. 3. The VRING and VIRTIO_DEV resource entries are combined to a single VDEV entry. This paves the way to supporting multiple VDEV entries. 4. Since we don't really support 64-bit rprocs yet, convert two stray u64 members to u32. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
-
- 04 Mar, 2012 1 commit
-
-
Mark Asselstine authored
dev_dbg() in rpmsg_probe() made use of the %x formatting that expects an 'unsigned int' which dma_addr_t is not in cases where dma_addr_t is 64-bit (CONFIG_ARCH_DMA_ADDR_T_64BIT). Casting to a 'unsigned long long' and using %llx will avoid this. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> CC: Ohad Ben-Cohen <ohad@wizery.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
-
- 28 Feb, 2012 5 commits
-
-
Ohad Ben-Cohen authored
After processing an incoming message, always publish the real size of its containing buffer when putting it back on the available rx ring. Using any different value might erroneously limit the remote processor (leading it to think the buffer is smaller than it really is). Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Grosen <mgrosen@ti.com> Cc: Suman Anna <s-anna@ti.com> Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Cc: Rob Clark <rob@ti.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org>
-
Ohad Ben-Cohen authored
When an inbound message arrives, validate its reported length before propagating it, otherwise buggy (or malicious) remote processors might trick us into accessing memory which we really shouldn't. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Grosen <mgrosen@ti.com> Cc: Suman Anna <s-anna@ti.com> Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Cc: Rob Clark <rob@ti.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org>
-
Ohad Ben-Cohen authored
The name service endpoint wasn't destroyed, so fix it. This is achieved by introducing an internal __rpmsg_destroy_ept function which doesn't assume the given ept is bound to an rpmsg channel (much like the existing __rpmsg_create_ept). This is needed because the name service ept belongs to the rpmsg bus, and is never bound with a specific rpdev. Reported-by: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Grosen <mgrosen@ti.com> Cc: Suman Anna <s-anna@ti.com> Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Cc: Rob Clark <rob@ti.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
-
Ohad Ben-Cohen authored
1. Depend on OMAP_IOMMU instead of selecting it, to fix an unmet direct dependency of it (and its imminent build error) 2. Set default to 'no' (achieved implicitly by dropping the 'default' line) Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Grosen <mgrosen@ti.com> Cc: Suman Anna <s-anna@ti.com> Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Cc: Rob Clark <rob@ti.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Russell King <linux@arm.linux.org.uk>
-
Ohad Ben-Cohen authored
Make sure we're parsing a 32bit image, since we only support the ELF32 binary format at this point. This should prevent unexpected behavior with non 32bit binaries. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Grosen <mgrosen@ti.com> Cc: Suman Anna <s-anna@ti.com> Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Cc: Rob Clark <rob@ti.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org>
-
- 23 Feb, 2012 1 commit
-
-
Arnd Bergmann authored
Merge tag 'rpmsg-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc into next/rpmsg * tag 'rpmsg-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: remoteproc: s/big switch/lookup table/ remoteproc: bail out if firmware has different endianess remoteproc: don't use virtio's weak barriers rpmsg: rename virtqueue_add_buf_gfp to virtqueue_add_buf rpmsg: depend on EXPERIMENTAL remoteproc: depend on EXPERIMENTAL rpmsg: add Kconfig menu remoteproc: add Kconfig menu remoteproc: look for truncated firmware images remoteproc/omap: utilize module_platform_driver remoteproc: remove unused resource type remoteproc: avoid registering a virtio device if not supported remoteproc: do not require an iommu samples/rpmsg: add an rpmsg driver sample rpmsg: add virtio-based remote processor messaging bus remoteproc/omap: add a remoteproc driver for OMAP4 remoteproc: create rpmsg virtio device remoteproc: add debugfs entries remoteproc: add framework for controlling remote processors
-
- 22 Feb, 2012 6 commits
-
-
Ohad Ben-Cohen authored
A lookup table would be easier to extend, and the resulting code is a bit cleaner. Reported-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
-
Ohad Ben-Cohen authored
At this point we don't support remote processors that have a different endianess than the host. Look out for these unsupported scenarios, and bail out if encountered. Reported-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Mark Grosen <mgrosen@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
-
Ohad Ben-Cohen authored
When creating a virtqueue for rpmsg, tell virtio we're not interested in "weak" smp barriers, since we're talking to a real device. On ARM, this means using a DSB instead of a DMB, which is needed for platforms that kick the remote processor using some kind of a mailbox device mapped to Device memory (otherwise the kick can jump ahead and wake the remote processor before it has observed the changes to the vrings). Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
-
Axel Lin authored
Since commit 7bb7aef2 "virtio: rename virtqueue_add_buf_gfp to virtqueue_add_buf", virtqueue_add_buf_gfp is already rename to virtqueue_add_buf now. This patch fixes below build error: CC [M] drivers/rpmsg/virtio_rpmsg_bus.o drivers/rpmsg/virtio_rpmsg_bus.c: In function 'rpmsg_send_offchannel_raw': drivers/rpmsg/virtio_rpmsg_bus.c:723: error: implicit declaration of function 'virtqueue_add_buf_gfp' make[2]: *** [drivers/rpmsg/virtio_rpmsg_bus.o] Error 1 make[1]: *** [drivers/rpmsg] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
-
Ohad Ben-Cohen authored
There isn't any binary change in sight or evidence of any stability issue, but as we just begin to get traction we can't rule them out completely. To be on the safe side, let's mark rpmsg as EXPERIMENTAL, and remove it later on after we have several happy users. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rob Clark <rob@ti.com> Cc: Mark Grosen <mgrosen@ti.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com>
-
Ohad Ben-Cohen authored
Remoteproc is still under development and as it gets traction we definitely expect to do some changes in the binary format (most probably only in the resource table, e.g. the upcoming move to TLV-based entries). Active testing and use of remoteproc is most welcome, but we don't want users to expect backward binary compatibility with the preliminary images we have today. Therefore mark remoteproc as EXPERIMENTAL, and explicitly inform the user about this when a new remote processor is registered. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rob Clark <rob@ti.com> Cc: Mark Grosen <mgrosen@ti.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com>
-
- 09 Feb, 2012 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
One patch fixes an bug in the ARM/MSM IOMMU code which returned sucess in the unmap function even when an error occured and the other patch adds a workaround into the AMD IOMMU driver to better handle broken IVRS ACPI tables (this patch fixes the case when a device is not listed in the table but actually translated by the iommu). * 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/msm: Fix error handling in msm_iommu_unmap() iommu/amd: Work around broken IVRS tables
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
This series contains pending target bug-fixes and cleanups for v3.3-rc3 that have been addressed the past weeks in lio-core.git. Some of the highlights include: - Fix handling for control CDBs with data greater than PAGE_SIZE (andy) - Use IP_FREEBIND for iscsi-target to address network portal creation issues with systemd (dax) - Allow PERSISTENT RESERVE IN for non-reservation holder (marco) - Fix iblock se_dev_attrib.unmap_granularity (marco) - Fix unsupported WRITE_SAME sense payload handling (martin) - Add workaround for zero-length control CDB handling (nab) - Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT (nab) - Fix target_submit_cmd() exception handling (nab) - Return correct ASC for unimplemented VPD pages (roland) - Don't zero pages used for data buffers (roland) - Fix return code of core_tpg_.*_lun (sebastian) * '3.3-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits) target: Fix unsupported WRITE_SAME sense payload iscsi: use IP_FREEBIND socket option iblock: fix handling of large requests target: handle empty string writes in sysfs iscsi_target: in_aton needs linux/inet.h target: Fix iblock se_dev_attrib.unmap_granularity target: Fix target_submit_cmd() exception handling target: Change target_submit_cmd() to return void target: accept REQUEST_SENSE with 18bytes target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0 target: Return correct ASC for unimplemented VPD pages iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT target: Allow control CDBs with data > 1 page iscsi-target: Fix up a few assignments iscsi-target: make one-bit bitfields unsigned iscsi-target: Fix double list_add with iscsit_alloc_buffs reject iscsi-target: Fix reject release handling in iscsit_free_cmd() target: fix return code of core_tpg_.*_lun target: use save/restore lock primitive in core_dec_lacl_count() target: avoid multiple outputs in scsi_dump_inquiry() ...
-
git://neil.brown.name/mdLinus Torvalds authored
Some simple md-related fixes. 1/ two small fixes to ensure we handle an interrupted resync properly. 2/ avoid loading the bitmap multiple times in dm-raid * tag 'md-3.3-fixes' of git://neil.brown.name/md: md: two small fixes to handling interrupt resync. Prevent DM RAID from loading bitmap twice.
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
SPI bug fixes for v3.3-rc2 Minor SPI device driver changes. A rename of the pch_spi_pcidev symbol that merely eliminates a modpost warning, and a Kconfig change to allow the Samsung spi driver to build on EXYNOS. * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: spi-topcliff-pch: rename pch_spi_pcidev to pch_spi_pcidev_driver spi: Add spi-s3c64xx driver dependency on ARCH_EXYNOS4
-
Linus Torvalds authored
Five fixes * branch 'akpm': pcmcia: fix socket refcount decrementing on each resume mm: fix UP THP spin_is_locked BUGs drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax mm: compaction: check for overlapping nodes during isolation for migration nilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments()
-
Russell King authored
This fixes a memory-corrupting bug: not only does it cause the warning, but as a result of dropping the refcount to zero, it causes the pcmcia_socket0 device structure to be freed while it still has references, causing slab caches corruption. A fatal oops quickly follows this warning - often even just a 'dmesg' following the warning causes the kernel to oops. While testing suspend/resume on an ARM device with PCMCIA support, and a CF card inserted, I found that after five suspend and resumes, the kernel would complain, and shortly die after with slab corruption. WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() As the message doesn't give a clue about which kobject, and the built-in debugging in drivers/base/power/main.c happens too late, this was added right before each get_device(): printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount)); and on the 3rd s2ram cycle, the following behaviour observed: On the 3rd suspend/resume cycle: dpm_prepare: c1a0d998 [pcmcia_socket0] 3 dpm_suspend: c1a0d998 [pcmcia_socket0] 3 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume: c1a0d998 [pcmcia_socket0] 3 dpm_complete: c1a0d998 [pcmcia_socket0] 2 4th: dpm_prepare: c1a0d998 [pcmcia_socket0] 2 dpm_suspend: c1a0d998 [pcmcia_socket0] 2 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume: c1a0d998 [pcmcia_socket0] 2 dpm_complete: c1a0d998 [pcmcia_socket0] 1 5th: dpm_prepare: c1a0d998 [pcmcia_socket0] 1 dpm_suspend: c1a0d998 [pcmcia_socket0] 1 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume: c1a0d998 [pcmcia_socket0] 1 dpm_complete: c1a0d998 [pcmcia_socket0] 0 ------------[ cut here ]------------ WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() Modules linked in: ucb1x00_core Backtrace: [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c) [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68) [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28) [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50) [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24) [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20) ... Looking at commit 7b24e798 ("pcmcia: split up central event handler"), the following change was made to cs.c: return 0; } #endif - - send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW); + if (!(skt->state & SOCKET_CARDBUS) && (skt->callback)) + skt->callback->early_resume(skt); return 0; } And the corresponding change in ds.c is from: -static int ds_event(struct pcmcia_socket *skt, event_t event, int priority) -{ - struct pcmcia_socket *s = pcmcia_get_socket(skt); ... - switch (event) { ... - case CS_EVENT_PM_RESUME: - if (verify_cis_cache(skt) != 0) { - dev_dbg(&skt->dev, "cis mismatch - different card\n"); - /* first, remove the card */ - ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH); - mutex_lock(&s->ops_mutex); - destroy_cis_cache(skt); - kfree(skt->fake_cis); - skt->fake_cis = NULL; - s->functions = 0; - mutex_unlock(&s->ops_mutex); - /* now, add the new card */ - ds_event(skt, CS_EVENT_CARD_INSERTION, - CS_EVENT_PRI_LOW); - } - break; ... - } - pcmcia_put_socket(s); - return 0; -} /* ds_event */ to: +static int pcmcia_bus_early_resume(struct pcmcia_socket *skt) +{ + if (!verify_cis_cache(skt)) { + pcmcia_put_socket(skt); + return 0; + } + dev_dbg(&skt->dev, "cis mismatch - different card\n"); + /* first, remove the card */ + pcmcia_bus_remove(skt); + mutex_lock(&skt->ops_mutex); + destroy_cis_cache(skt); + kfree(skt->fake_cis); + skt->fake_cis = NULL; + skt->functions = 0; + mutex_unlock(&skt->ops_mutex); + /* now, add the new card */ + pcmcia_bus_add(skt); + return 0; +} As can be seen, the original function called pcmcia_get_socket() and pcmcia_put_socket() around the guts, whereas the replacement code calls pcmcia_put_socket() only in one path. This creates an imbalance in the refcounting. Testing with pcmcia_put_socket() put removed shows that the bug is gone: dpm_suspend: c1a10998 [pcmcia_socket0] 5 dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume: c1a10998 [pcmcia_socket0] 5 dpm_complete: c1a10998 [pcmcia_socket0] 5 Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Fix CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_SMP=n CONFIG_DEBUG_VM=y CONFIG_DEBUG_SPINLOCK=n kernel: spin_is_locked() is then always false, and so triggers some BUGs in Transparent HugePage codepaths. asm-generic/bug.h mentions this problem, and provides a WARN_ON_SMP(x); but being too lazy to add VM_BUG_ON_SMP, BUG_ON_SMP, WARN_ON_SMP_ONCE, VM_WARN_ON_SMP_ONCE, just test NR_CPUS != 1 in the existing VM_BUG_ONs. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Axel Lin authored
In current code, pltfm->als_vmin is set to LM3530_ALS_WINDOW_mV and pltfm->als_vmax is 0. This does not make sense. I think what we want here is setting pltfm->als_vmax to LM3530_ALS_WINDOW_mV. Both als_vmin and als_vmax local variables will be set to pltfm->als_vmin and pltfm->als_vmax by a few lines latter. Thus also remove a redundant assignment for als_vmin and als_vmax in this patch. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mel Gorman authored
When isolating pages for migration, migration starts at the start of a zone while the free scanner starts at the end of the zone. Migration avoids entering a new zone by never going beyond the free scanned. Unfortunately, in very rare cases nodes can overlap. When this happens, migration isolates pages without the LRU lock held, corrupting lists which will trigger errors in reclaim or during page free such as in the following oops BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff810f795c>] free_pcppages_bulk+0xcc/0x450 PGD 1dda554067 PUD 1e1cb58067 PMD 0 Oops: 0000 [#1] SMP CPU 37 Pid: 17088, comm: memcg_process_s Tainted: G X RIP: free_pcppages_bulk+0xcc/0x450 Process memcg_process_s (pid: 17088, threadinfo ffff881c2926e000, task ffff881c2926c0c0) Call Trace: free_hot_cold_page+0x17e/0x1f0 __pagevec_free+0x90/0xb0 release_pages+0x22a/0x260 pagevec_lru_move_fn+0xf3/0x110 putback_lru_page+0x66/0xe0 unmap_and_move+0x156/0x180 migrate_pages+0x9e/0x1b0 compact_zone+0x1f3/0x2f0 compact_zone_order+0xa2/0xe0 try_to_compact_pages+0xdf/0x110 __alloc_pages_direct_compact+0xee/0x1c0 __alloc_pages_slowpath+0x370/0x830 __alloc_pages_nodemask+0x1b1/0x1c0 alloc_pages_vma+0x9b/0x160 do_huge_pmd_anonymous_page+0x160/0x270 do_page_fault+0x207/0x4c0 page_fault+0x25/0x30 The "X" in the taint flag means that external modules were loaded but but is unrelated to the bug triggering. The real problem was because the PFN layout looks like this Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x01e80000 Movable zone start PFN for each node early_node_map[14] active PFN ranges 0: 0x00000010 -> 0x0000009b 0: 0x00000100 -> 0x0007a1ec 0: 0x0007a354 -> 0x0007a379 0: 0x0007f7ff -> 0x0007f800 0: 0x00100000 -> 0x00680000 1: 0x00680000 -> 0x00e80000 0: 0x00e80000 -> 0x01080000 1: 0x01080000 -> 0x01280000 0: 0x01280000 -> 0x01480000 1: 0x01480000 -> 0x01680000 0: 0x01680000 -> 0x01880000 1: 0x01880000 -> 0x01a80000 0: 0x01a80000 -> 0x01c80000 1: 0x01c80000 -> 0x01e80000 The fix is straight-forward. isolate_migratepages() has to make a similar check to isolate_freepage to ensure that it never isolates pages from a zone it does not hold the LRU lock for. This was discovered in a 3.0-based kernel but it affects 3.1.x, 3.2.x and current mainline. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Xi Wang authored
nsegs is read from userspace. Limit its value and avoid overflowing nsegs * sizeof(__u64) in the subsequent call to memdup_user(). This patch complements 481fe17e ("nilfs2: potential integer overflow in nilfs_ioctl_clean_segments()"). Signed-off-by: Xi Wang <xi.wang@gmail.com> Cc: Haogang Chen <haogangchen@gmail.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 08 Feb, 2012 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
sound fixes #2 for 3.3-rc3 A collection of small fixes, mostly for regressions. In addition, a few ASoC wm8994 updates are included, too. * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: wm8994: Disable line output discharge prior to ramping VMID ASoC: wm8994: Fix typo in VMID ramp setting ALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs ALSA: usb-audio: add Edirol UM-3G support ALSA: hda - add support for Uniwill ECS M31EI notebook ALSA: hda - Fix error handling in patch_ca0132.c ASoC: wm8994: Enabling VMID should take a runtime PM reference ALSA: hda/realtek - Fix a wrong condition ALSA: emu8000: Remove duplicate linux/moduleparam.h include from emu8000_patch.c ALSA: hda/realtek - Add missing Bass and CLFE as vmaster slaves ASoC: wm_hubs: Correct line input to line output 2 paths ASoC: cs42l73: Fix Output [X|A|V]SP_SCLK Sourcing Mode setting for master mode ASoC: wm8962: Fix word length configuration ASoC: core: Better support for idle_bias_off suspend ignores ASoC: wm8994: Remove ASoC level register cache sync ASoC: wm_hubs: Fix routing of input PGAs to line output mixer
-
Ohad Ben-Cohen authored
Add a dedicated Kconfig menu for the rpmsg drivers, so they don't show up in the main driver menu. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
-
Ohad Ben-Cohen authored
Add a dedicated Kconfig menu for the remoteproc drivers, so they don't show up in the main driver menu. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
-
Ohad Ben-Cohen authored
Make sure firmware isn't truncated before accessing its data. Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
-
Ohad Ben-Cohen authored
Ditch some boilerplate code by employing the module_platform_driver helper. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
-
Ohad Ben-Cohen authored
RSC_VIRTIO_CFG isn't being used, so remove it. Originally it was introduced to overcome a resource table limitation that prevented describing a virtio device in a single resource table entry. The plan though is to describe resource table entries in a TLV fashion, where each entry will consume the amount of space it requires, so the original limitation is anyway temporary. Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
-
Mark Grosen authored
Let remoteproc know when the firmware doesn't support any virtio functionality, so registering a virtio device can be avoided. This is needed for remote processors that doesn't require any virtio-based communications, but are still controlled via remoteproc. [ohad@wizery.com: write commit log] Signed-off-by: Mark Grosen <mgrosen@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
-
Mark Grosen authored
Not all remote processors employ an IOMMU, so do not error out on !iommu_present(). Note: we currently still use iommu_present() to tell whether we need to configure an IOMMU or not. That works for simple cases, but will easily fail with more complicated ones (e.g. where an IOMMU exists, but not all remote processors use it). When those use cases show up, we will solve them by introducing something like remoteproc hw capabilities. [ohad@wizery.com: write commit log] Signed-off-by: Mark Grosen <mgrosen@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
-