- 11 Feb, 2020 12 commits
-
-
Daniel Vetter authored
Instead check for master status, in case we've raced. This is the last exception to the general rule that we restore fbcon only when there's no master active. Compositors are supposed to drop their master status before they switch to a different console back to text mode (or just switch to text mode directly, without a vt switch). This is known to break some subtests of kms_fbcon_fbt in igt, but they're just wrong - it does a graphics/text mode switch for the vt without updating the master status. Also add a comment to the drm_client->restore hook that this is expected going forward from all clients (there's currently just one). v2: Also drop the force in pan_display v3: Restore the _force to pan_display, this actually means _locked in that path. Spotted by Noralf. Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Tested-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200204150146.2006481-3-daniel.vetter@ffwll.ch
-
Christian König authored
This allows it to call the function without the lock held. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
xinhui pan <xinhui.pan@amd.com> Link: https://patchwork.freedesktop.org/patch/352742/
-
Christian König authored
The function is always called with deleted BOs. While at it cleanup the indentation as well. Signed-off-by:
-
Christian König authored
Ghost BOs need to stick with the resv object only when the origin is imported. This is a low hanging fruit to avoid OOM situations on evictions. Signed-off-by:
-
Gerd Hoffmann authored
Move final cleanups to qxl_drm_release() callback. Add drm_atomic_helper_shutdown() call to qxl_pci_remove(). Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20200210113753.5614-3-kraxel@redhat.com
-
Gerd Hoffmann authored
Reorder calls in qxl_device_fini(). Cleaning up gem & ttm might trigger qxl commands, so we should do that before releaseing command rings. Signed-off-by:
-
Wen Yang authored
The call to of_find_matching_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:212:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function. drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:237:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: Markus Elfring <Markus.Elfring@web.de> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/1554692313-28882-2-git-send-email-wen.yang99@zte.com.cn
-
Peter Ujfalusi authored
dma_sync_wait() is calling it so no need to call it in the driver. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by:
-
Peter Ujfalusi authored
Instead of dma_dev->device_prep_dma_memcpy() use the existing macro to prepare the memcpy. Signed-off-by:
-
Kieran Bingham authored
Fix trivial spelling identified while examining the code. s/supprted./supported./ Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
-
Zheng Bin authored
Fixes coccicheck warning: drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c:681:1-15: WARNING: Assignment of 0/1 to bool variable drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c:732:1-15: WARNING: Assignment of 0/1 to bool variable Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zheng Bin <zhengbin13@huawei.com> Signed-off-by:
-
Tomi Valkeinen authored
Add pixel clock limits to the driver as per TFP410 datasheet: min 25MHz, max 165MHz. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
-
- 10 Feb, 2020 19 commits
-
-
Gerd Hoffmann authored
Introduce new virtio_gpu_object_shmem_init() helper function which will create the virtio_gpu_mem_entry array, containing the backing storage information for the host. For the most path this just moves code from virtio_gpu_object_attach(). Signed-off-by:
Chia-I Wu <olvaffe@gmail.com>
-
Gerd Hoffmann authored
Stop sending DETACH_BACKING commands, that will happening anyway when releasing resources via UNREF. Handle guest-side cleanup in virtio_gpu_cleanup_object(), called when the host finished processing the UNREF command. Signed-off-by:
-
Gerd Hoffmann authored
Add new virtio_gpu_cleanup_object() helper function for object cleanup. Wire up callback function for resource unref, do cleanup from callback when we know the host stopped using the resource. Signed-off-by:
-
Gerd Hoffmann authored
Just call virtio_gpu_alloc_cmd_resp with some fixed args instead of duplicating most of the function body. Signed-off-by:
-
Gerd Hoffmann authored
Check whenever mode_config was actually properly initialized before trying to clean it up. Signed-off-by:
-
Enric Balletbo i Serra authored
Fix the 'manged' typo with 'managed' in the drm_panel_bridge_add kernel-doc documentation. Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191218121223.30181-1-enric.balletbo@collabora.com
-
Yannick Fertré authored
Sometime the post_disable function is missing (not registered). Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Reviewed-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
-
Jyri Sarha authored
To enable HDMI audio the SND_SOC_HDMI_CODEC needs to be configured. Enable HDMI audio by selecting SND_SOC_HDMI_CODEC if SND_SOC is configured. SND_SOC_HDMI_CODEC has no config menu entry and should be selected automatically by the drivers using it. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
-
Peter Ujfalusi authored
Add basic support for the Toshiba TC358768 RGB to DSI bridge. Not all the features of the TC358768 is implemented by the initial driver: MIPI_DSI_MODE_VIDEO and MIPI_DSI_FMT_RGB888 is only supported and tested. Only write is implemented for mipi_dsi_host_ops.transfer. Signed-off-by:
-
Peter Ujfalusi authored
TC358768/TC358778 is a Parallel RGB to MIPI DSI bridge. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Bogdan Togorean authored
ADV7535 is a part compatible with ADV7533 but it supports 1080p@60hz and v1p2 supply is fixed to 1.8V Signed-off-by:
Bogdan Togorean <bogdan.togorean@analog.com> Reviewed-by:
-
Bogdan Togorean authored
ADV7535 is a DSI to HDMI bridge chip like ADV7533 but it allows 1080p@60Hz. v1p2 is fixed to 1.8V on ADV7535. Signed-off-by:
-
Bogdan Togorean authored
This commit remove DRM_I2C_ADV7533 resulting a simpler driver and less choices in Kconfig. Signed-off-by:
-
Thomas Zimmermann authored
Atomic modesetting doesn't use struct drm_connector_funcs.dpms and the set function, drm_helper_connector_dpms(), wouldn't support it anyway. So keep the pointer to NULL. Signed-off-by:
-
Thomas Zimmermann authored
Atomic modesetting doesn't use struct drm_connector_funcs.dpms and the set function, drm_helper_connector_dpms(), wouldn't support it anyway. So keep the pointer to NULL. Signed-off-by:
-
Andy Shevchenko authored
The spi_register_driver() will set the ->owner member to THIS_MODULE. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
David Lechner <david@lechnology.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200131204923.48928-4-andriy.shevchenko@linux.intel.com
-
Andy Shevchenko authored
There is one OF call in the driver that limits its area of use. Replace it to generic device_get_match_data() and get rid of OF dependency. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Andy Shevchenko authored
The spi_register_driver() will set the ->owner member to THIS_MODULE. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Andy Shevchenko authored
There is one OF call in the driver that limits its area of use. Replace it to generic device_get_match_data() and get rid of OF dependency. While here, cast SPI driver data to certain enumerator type. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Lechner <david@lechnology.com> Signed-off-by:
-
- 09 Feb, 2020 5 commits
-
-
Kamlesh Gurudasani authored
This adds support fot ilitek,ili9486 based displays with shift register in front of controller. Ozzmaker,Piscreen and Waveshare,rpi-lcd-35 are such displays. Acked-by: Sam Ravnborg <sam@ravnborg.org> (v4) Reviewed-by: Noralf Tronnes <noralf@tronnes.org> (v4) Signed-off-by:
Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com> Signed-off-by:
-
Kamlesh Gurudasani authored
This binding is for the tft displays based on ilitek,ili9486. ozzmaker,piscreen and waveshare,rpi-lcd-35 are such displays Signed-off-by:
-
Benjamin Gaignard authored
Convert orisetech,otm8009a to json-schema. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by:
-
Benjamin Gaignard authored
Convert raydium,rm68200 to json-schema. Signed-off-by:
-
Sam Ravnborg authored
To complement panel-simple.yaml, create panel-simple-dsi.yaml. panel-simple-dsi-yaml are for all simple DSP panels with a single power-supply and optional backlight / enable GPIO. Migrate panasonic,vvx10f034n00 over to the new file. The objectives with one file for all the simple DSI panels are: - Make it simpler to add bindings for simple DSI panels - Keep the number of bindings file lower - Keep the binding documentation for simple DSI panels more consistent Signed-off-by:
-
- 07 Feb, 2020 1 commit
-
-
Gerd Hoffmann authored
If the virtio device supports indirect ring descriptors we need only one ring entry for the whole command. Take that into account when checking whenever the virtqueue has enough free entries for our command. Signed-off-by:
-
- 06 Feb, 2020 3 commits
-
-
Chia-I Wu authored
It becomes clear that virtio_gpu_queue_fenced_ctrl_buffer should be responsible for setting up sgs and virtio_gpu_queue_ctrl_sgs should be responsible for queuing sgs. Signed-off-by:
-
Chia-I Wu authored
When vqs_ready is false, vq should be considered invalid and we should not check vq->num_free. After this change, a fenced command queued before the vqs are ready will have fence id 0 and will be considered done. Signed-off-by:
-
Chia-I Wu authored
Signed-off-by:
-
