Older versions of GCC are rather stupid about strict aliasing:

  util/trace-event-parse.c: In function 'parse_cmdlines':
  util/trace-event-parse.c:93: warning: dereferencing type-punned pointer will break strict-aliasing rules
  util/trace-event-parse.c: In function 'parse_proc_kallsyms':
  util/trace-event-parse.c:155: warning: dereferencing type-punned pointer will break strict-aliasing rules
  util/trace-event-parse.c:157: warning: dereferencing type-punned pointer will break strict-aliasing rules
  util/trace-event-parse.c:158: warning: dereferencing type-punned pointer will break strict-aliasing rules
  util/trace-event-parse.c: In function 'parse_ftrace_printk':
  util/trace-event-parse.c:294: warning: dereferencing type-punned pointer will break strict-aliasing rules
  util/trace-event-parse.c:295: warning: dereferencing type-punned pointer will break strict-aliasing rules
  make: *** [util/trace-event-parse.o] Error 1

Make it clear to GCC that we intend with those pointers, by passing
them through via an explicit (void *) cast.

We might want to add -fno-strict-aliasing as well, like the kernel
itself does.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Make it easier to turn warnings on/off by using a separate
line for each warning added.

Some of the warnings have too much of a nuisance factor and
we might want to turn them off in the future.

Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Complete support for __str_loc type strings of ftrace events
which have dynamic offsets values set for each of them inside
their sammples.

Before:
        geany-5759  [000]     0.000000: lock_release: name
        geany-5759  [000]     0.000000: lock_release: name
        geany-5759  [000]     0.000000: lock_release: name
  kondemand/0-362   [000]     0.000000: lock_release: name
      pdflush-421   [000]     0.000000: lock_release: name

After:
        geany-5759  [000]     0.000000: lock_release: &u->lock
        geany-5759  [000]     0.000000: lock_release: key
        geany-5759  [000]     0.000000: lock_release: &group->notification_mutex
  kondemand/0-362   [000]     0.000000: lock_release: &rq->lock
      pdflush-421   [000]     0.000000: lock_release: &rq->lock
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1251693921-6579-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>

In perf tools, we hardcode the pid 0 cmdline resolving to
"idle" because the init task is not included in the COMM
events.

But the idle tasks secondary cpus are resolved into their
"init" name through the COMM events.

We have then such strange result in perf report (ditto with
trace):

    19.66%       init    [kernel]          [k] acpi_idle_enter_c1
    17.32%       [idle]  [kernel]          [k] acpi_idle_enter_c1

It's then better to unify the swapper tasks into a single init
name.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1251693921-6579-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>

The cmd-trace tool used the cmdline file and resolved the idle
thread using a hardcoded check for the 0 task pid.

Now we have a centralized way to do that from perf using
register_idle_thread() API.

Before:
	:0-0     [000]     0.000000: irq_handler_entry: irq=0 handler=name
	:0-0     [000]     0.000000: irq_handler_entry: irq=0 handler=name

After:
	[idle]-0     [000]     0.000000: irq_handler_entry: irq=0 handler=name
	[idle]-0     [000]     0.000000: irq_handler_entry: irq=0 handler=name
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1251693921-6579-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Librarize register_idle_thread() used by annotate and report.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1251693921-6579-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add missing documentation for the following parameters:

- perf record -R
- perf report -g
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1251682323-10395-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: this topic is ready now to merge into the main
              development branch for .32, with functional
              perf trace output.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This improves patch fa6963b2 so that perf.data stuff that has
been dumped as root can be read (annotate/report) by a user
without the use of the --force.

Rationale is that root has plenty of ways to screw us (usually)
that do not require twisted schemes involving specially
crafting a perf.data.
Signed-off-by: Pierre Habouzit <pierre.habouzit@intersec.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
LKML-Reference: <20090827075902.GF19653@laphroaig.corp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Some string fields are not printed because of a missing printf
in the post-processing.

Before:
	    perf-10070 [000]     0.000000: sched_switch: task :10070 [120] (R) ==> :5720 [120]
           geany-5720  [000]     0.000000: sched_switch: task :5720 [120] (S) ==> :10070 [120]
            perf-10070 [000]     0.000000: sched_switch: task :10070 [120] (R) ==> :5720 [120]
           geany-5720  [000]     0.000000: sched_switch: task :5720 [120] (S) ==> :10070 [120]
          <idle>-0     [000]     0.000000: sched_switch: task :0 [140] (R) ==> :361 [115]

After:
	    perf-10070 [000]     0.000000: sched_switch: task perf:10070 [120] (R) ==> geany:5720 [120]
           geany-5720  [000]     0.000000: sched_switch: task geany:5720 [120] (S) ==> perf:10070 [120]
            perf-10070 [000]     0.000000: sched_switch: task perf:10070 [120] (R) ==> geany:5720 [120]
           geany-5720  [000]     0.000000: sched_switch: task geany:5720 [120] (S) ==> perf:10070 [120]
          <idle>-0     [000]     0.000000: sched_switch: task swapper:0 [140] (R) ==> kondemand/1:361 [115]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1251427567-10551-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

While opening a trace event counter, every events are saved in
the trace.info file. But we only want to save the
specifications of the events we are using.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1251421798-9101-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090826145126.GA5255@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Provide the ability to configure a counter to send its output
to another (already existing) counter's output stream.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090819092023.980284148@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Currently, if a group is created where the group leader is
initially disabled but a non-leader member is initially
enabled, and then the leader is subsequently enabled some time
later, the time_enabled for the non-leader member will reflect
the whole time since it was created, not just the time since
the leader was enabled.

This is incorrect, because all of the members are effectively
disabled while the leader is disabled, since none of the
members can go on the PMU if the leader can't.

Thus we have to update the ->tstamp_enabled for all the enabled
group members when a group leader is enabled, so that the
time_enabled computation only counts the time since the leader
was enabled.

Similarly, when disabling a group leader we have to update the
time_enabled and time_running for all of the group members.

Also, in update_counter_times, we have to treat a counter whose
group leader is disabled as being disabled.
Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
LKML-Reference: <19091.29664.342227.445006@drongo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Conflicts:
	tools/perf/builtin-annotate.c
	tools/perf/builtin-report.c

Merge reason: resolve these conflicts.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add OPT_END to option array of perf-trace for fixing a SEGV bug when
showing perf-trace help message.

Without this patch;
 ./perf trace -h

 usage: perf trace [<options>] <command>

    -D, --dump-raw-trace  dump raw trace in ASCII
    -v, --verbose         be more verbose (show symbol address, etc)
    -f, Segmentation fault

With this patch:
 ./perf trace -h

 usage: perf trace [<options>] <command>

    -D, --dump-raw-trace  dump raw trace in ASCII
    -v, --verbose         be more verbose (show symbol address, etc)
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090821185603.11039.62109.stgit@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

When you iterate a list, using the iterator is useful.

Before:

   ID: 5
   ID: 5
   ID: 5
   ID: 5
   EVNT: 0x40088b scale: nan ID: 5 CNT: 1006252 ID: 6 CNT: 1011090 ID: 7 CNT: 1011196 ID: 8 CNT: 1011095
   EVNT: 0x40088c scale: 1.000000 ID: 5 CNT: 2003065 ID: 6 CNT: 2011671 ID: 7 CNT: 2012620 ID: 8 CNT: 2013479
   EVNT: 0x40088c scale: 1.000000 ID: 5 CNT: 3002390 ID: 6 CNT: 3015996 ID: 7 CNT: 3018019 ID: 8 CNT: 3020006
   EVNT: 0x40088b scale: 1.000000 ID: 5 CNT: 4002406 ID: 6 CNT: 4021120 ID: 7 CNT: 4024241 ID: 8 CNT: 4027059

After:

   ID: 1
   ID: 2
   ID: 3
   ID: 4
   EVNT: 0x400889 scale: nan ID: 1 CNT: 1005270 ID: 2 CNT: 1009833 ID: 3 CNT: 1010065 ID: 4 CNT: 1010088
   EVNT: 0x400898 scale: nan ID: 1 CNT: 2001531 ID: 2 CNT: 2022309 ID: 3 CNT: 2022470 ID: 4 CNT: 2022627
   EVNT: 0x400888 scale: 0.489467 ID: 1 CNT: 3001261 ID: 2 CNT: 3027088 ID: 3 CNT: 3027941 ID: 4 CNT: 3028762
Reported-by: stephane eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey J Ashford <cjashfor@us.ibm.com>
Cc: perfmon2-devel <perfmon2-devel@lists.sourceforge.net>
LKML-Reference: <1250867976.7538.73.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add an owner check to opening perf.data files and a switch to
silence it.

Because perf-report/perf-annotate are binary parsers reading
another users' perf.data file could be a security risk if the
file were explicitly engineered to trigger bugs in the parser
(we hope of course there are non such bugs, but you never
know).
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090819092023.896648538@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

pushd tools/perf/Documentation
make html
popd

is failing for me...

    ASCIIDOC perf-annotate.html
ERROR: unsafe: include file: /etc/asciidoc/./stylesheets/xhtml11.css
ERROR: unsafe: include file:
/etc/asciidoc/./stylesheets/xhtml11-manpage.css
ERROR: unsafe: include file:
/etc/asciidoc/./stylesheets/xhtml11-quirks.css
make: *** [perf-annotate.html] Error 1

Apparently asciidoc "unsafe" is the default mode of operation
in practice.

https://bugzilla.redhat.com/show_bug.cgi?id=506953

Works tidily now.
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090818164125.GM25206@bombadil.infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The librarization of the thread helpers between annotate and
report lost some perf report specifics.

thread__insert_map() had its most uptodate version in perf
report which cared about partial map overlapping. In case of
overlap between two maps, perf annotate's version removes the
whole old map without considering if it partially or
absolutely overlaps the new map.

We exported the odd version, change it by using the perf
report version.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250607843-7395-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The librarization of the thread helpers between annotate and
report lost some perf report specifics.

This patch fixes the thread comm column adjusting that has
been omitted during this export.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250604226-6852-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Linus reported this perf annotate segfault:

        [torvalds@nehalem git]$ perf annotate unmap_vmas
        Segmentation fault

       	#0  map__clone (self=<value optimized out>) at builtin-annotate.c:236
       	#1  thread__fork (self=<value optimized out>) at builtin-annotate.c:372

The bug here was that builtin-annotate.c was a copy of
builtin-report.c and a threading related fix to builtin-report.c
didnt get propagated to builtin-annotate.c ...
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

PARISC does not build:

/home/mingo/tip/kernel/perf_counter.c: In function 'perf_counter_index':
/home/mingo/tip/kernel/perf_counter.c:2016: error: 'PERF_COUNTER_INDEX_OFFSET' undeclared (first use in this function)
/home/mingo/tip/kernel/perf_counter.c:2016: error: (Each undeclared identifier is reported only once
/home/mingo/tip/kernel/perf_counter.c:2016: error: for each function it appears in.)

As PERF_COUNTER_INDEX_OFFSET is not defined.

Now, we could define it in the architecture - but lets also provide
a core default of 0 (which happens to be what all but one
architecture uses at the moment).

Architectures that need a different index offset should set this
value in their asm/perf_counter.h files.

Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The _XOPEN_SOURCE* defines are not really needed on Linux and
it's not like we'll port this to AIX ;-)

The define also broke the build with gcc 4.4.1:

 CC util/trace-event-parse.o
 In file included from util/trace-event-parse.c:32:
 util/util.h:43:1: error: "_XOPEN_SOURCE" redefined

So remove them.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/perfcounters into perfcounters/core

This adds support for tracing callchains for powerpc, both 32-bit
and 64-bit, and both in the kernel and userspace, from PMU interrupt
context.

The first three entries stored for each callchain are the NIP (next
instruction pointer), LR (link register), and the contents of the LR
save area in the second stack frame (the first is ignored because the
ABI convention on powerpc is that functions save their return address
in their caller's stack frame).  Because leaf functions don't have to
save their return address (LR value) and don't have to establish a
stack frame, it's possible for either or both of LR and the second
stack frame's LR save area to have valid return addresses in them.
This is basically impossible to disambiguate without either reading
the code or looking at auxiliary information such as CFI tables.
Since we don't want to do either of those things at interrupt time,
we store both LR and the second stack frame's LR save area.

Once we get past the second stack frame, there is no ambiguity; all
return addresses we get are reliable.

For kernel traces, we check whether they are valid kernel instruction
addresses and store zero instead if they are not (rather than
omitting them, which would make it impossible for userspace to know
which was which).  We also store zero instead of the second stack
frame's LR save area value if it is the same as LR.

For kernel traces, we check for interrupt frames, and for user traces,
we check for signal frames.  In each case, since we're starting a new
trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace
knows that the next three entries are NIP, LR and the second stack frame
for the interrupted context.

We read user memory with __get_user_inatomic.  On 64-bit, if this
PMU interrupt occurred while interrupts are soft-disabled, and
there is no MMU hash table entry for the page, we will get an
-EFAULT return from __get_user_inatomic even if there is a valid
Linux PTE for the page, since hash_page isn't reentrant.  Thus we
have code here to read the Linux PTE and access the page via the
kernel linear mapping.  Since 64-bit doesn't use (or need) highmem
there is no need to do kmap_atomic.  On 32-bit, we don't do soft
interrupt disabling, so this complication doesn't occur and there
is no need to fall back to reading the Linux PTE, since hash_page
(or the TLB miss handler) will get called automatically if necessary.

Note that we cannot get PMU interrupts in the interval during
context switch between switch_mm (which switches the user address
space) and switch_to (which actually changes current to the new
process).  On 64-bit this is because interrupts are hard-disabled
in switch_mm and stay hard-disabled until they are soft-enabled
later, after switch_to has returned.  So there is no possibility
of trying to do a user stack trace when the user address space is
not current's address space.
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This provides a mechanism to allow the perf_counters code to access
user memory in a PMU interrupt routine.  Such an access can cause
various kinds of interrupt: SLB miss, MMU hash table miss, segment
table miss, or TLB miss, depending on the processor.  This commit
only deals with 64-bit classic/server processors, which use an MMU
hash table.  32-bit processors are already able to access user memory
at interrupt time.  Since we don't soft-disable on 32-bit, we avoid
the possibility of reentering hash_page or the TLB miss handlers,
since they run with interrupts disabled.

On 64-bit processors, an SLB miss interrupt on a user address will
update the slb_cache and slb_cache_ptr fields in the paca.  This is
OK except in the case where a PMU interrupt occurs in switch_slb,
which also accesses those fields.  To prevent this, we hard-disable
interrupts in switch_slb.  Interrupts are already soft-disabled at
this point, and will get hard-enabled when they get soft-enabled
later.

This also reworks slb_flush_and_rebolt: to avoid hard-disabling twice,
and to make sure that it clears the slb_cache_ptr when called from
other callers than switch_slb, the existing routine is renamed to
__slb_flush_and_rebolt, which is called by switch_slb and the new
version of slb_flush_and_rebolt.

Similarly, switch_stab (used on POWER3 and RS64 processors) gets a
hard_irq_disable() to protect the per-cpu variables used there and
in ste_allocate.

If a MMU hashtable miss interrupt occurs, normally we would call
hash_page to look up the Linux PTE for the address and create a HPTE.
However, hash_page is fairly complex and takes some locks, so to
avoid the possibility of deadlock, we check the preemption count
to see if we are in a (pseudo-)NMI handler, and if so, we don't call
hash_page but instead treat it like a bad access that will get
reported up through the exception table mechanism.  An interrupt
whose handler runs even though the interrupt occurred when
soft-disabled (such as the PMU interrupt) is considered a pseudo-NMI
handler, which should use nmi_enter()/nmi_exit() rather than
irq_enter()/irq_exit().
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

On 32-bit systems with 64-bit PTEs, the PTEs have to be written in two
32-bit halves.  On SMP we write the higher-order half and then the
lower-order half, with a write barrier between the two halves, but on
UP there was no particular ordering of the writes to the two halves.

This extends the ordering that we already do on SMP to the UP case as
well.  The reason is that with the perf_counter subsystem potentially
accessing user memory at interrupt time to get stack traces, we have
to be careful not to create an incorrect but apparently valid PTE even
on UP.
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The ftrace event format parser handles the usual casts but not
the cast to pointers. Such casts have been introduced recently
with the module trace events and raise the following parsing
error:

	Fatal: bad op token )

This is because it considers the "*" character as a binary
operator. Make it then aware of casts to pointers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1250543271-8383-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

You can enable a counter's PERF_SAMPLE_RAW attribute in two
fashions:

- using the -R option (every counters get PERF_SAMPLE_RAW)
- using the :record suffix in a trace event counter name

Currently we record the events info in a trace.info file from
perf record when the former method is used but we omit it with
the latter.

Check both situations.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1250543271-8383-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

When a user runs perf trace using an input with logged
counters without PERF_SAMPLE_RAW attribute, warn by giving a
nice tip.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1250543271-8383-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

While running perf report -g in a perf.data file that hasn't
been recorded in callchain mode, the error reported has a
spelling issue:

	./perf report -g
	selected -c but no callchain data. Did you call perf record without -g?

Fix it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1250543271-8383-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This adds perf trace into the set of perf tools.

It is written to fetch the tracepoint samples from perf events
and display them, according to the events information given by
the debugfs files through the util/trace* tools.

It is a rough first shot and doesn't yet handle the cpu,
timestamps fields and some other things.

Example:

 perf record -f -e workqueue:workqueue_execution:record -F 1 -a
 perf trace

       kblockd/0-236   [000]     0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0
     kondemand/0-360   [000]     0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0
     kondemand/0-360   [000]     0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0

Todo:

- A lot of things!
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add util/trace-event-parse.c which provides the handlers to
parse the ftrace events info from the stream and handles the
ftrace perf samples event printing.

This file is a rename of the parse-events.c file from the
trace-cmd tools, written by Steven Rostedt and Josh Triplett,
originated from the git tree:

  git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git

This is a perf tools integration.

[ fweisbec@gmail.com: various changes for perf tools
                      integration. ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1250518688-7207-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add util/trace-event-read.c which handles trace events
informations reading.

This file is a rename of the trace-read.c file from the
trace-cmd tools, written by Steven Rostedt and Josh Triplett,
originated from the git tree:

   git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git

This is its perf tools integration.

[ fweisbec@gmail.com: various changes for perf tools
                      integration. ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1250518688-7207-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add util/trace-event-info.c which handles ftrace file IO from
debugfs and provides general helpers to fetch/save ftrace
events informations.

This file is a rename of the trace-cmd.c file from the
trace-cmd tools, written by Steven Rostedt and Josh Triplett,
originated from the git tree:

  git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git

This is a perf tools integration.

For now, ftrace events information is saved in a separate file
than the standard perf.data

[fweisbec@gmail.com: various changes for perf tools integration]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1250518688-7207-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In general, code in perf_counter.c that is called through an
IPI checks, for per-task counters, that the counter's task is
still the current task.  This is to handle the race condition
where the cpu switches from the task we want to another task in
the interval between sending the IPI and the IPI arriving and
being handled on the target CPU.

For some reason, __perf_counter_read is missing this check, yet
there is no reason why the race condition can't occur.  This
adds a check that the current task is the one we want.  If it
isn't, we just return.  In that case the counter->count value
should be up to date, since it will have been updated when the
counter was scheduled out, which must have happened since the
IPI was sent.

I don't have an example of an actual failure due to this race,
but it seems obvious that it could occur and we need to guard
against it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <19076.63614.277861.368125@drongo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Rename it to examples.txt to avoid the perf-*.txt pattern in
the Makefile, otherwise 'make doc' fails because
perf-examples.txt is not formatted to be a man page:

 ERROR: perf-examples.txt: line 1: manpage document title is mandatory
Signed-off-by: Carlos R. Mafra <crmafra@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Librarize trace_event() helper so that perf trace can use it
too. Also clean up the debug.h includes a bit.

It's not good to have it included in perf.h because it doesn't
make it flexible against other headers it may need (headers
that can also depend on perf.h and then create a recursive
header dependency).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250453149-664-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Librarize the sample type and attr fetching from perf data file
headers so that we can also use it from perf trace.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250448997-30715-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>