- 19 Sep, 2009 35 commits
-
-
Michael Krufky authored
Display function parameters, idx and len, in error log. Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Michael Krufky authored
For the case of multiple tuner instances, ensure that non-default configuration options are saved into the driver's state. This resolves an issue where a configuration option may not be carried into the driver if the analog side of a hybrid driver initializes before the digital side. Signed-off-by:
-
Michael Krufky authored
minor cleanup: move small_i2c assignment to the state config block Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
For better readability, treat the low power standby mode configuration as an output option feature configuration, and change it to a bitmask. If left unconfigured, all features will remain enabled, just as the default configuration was before these changes were introduced. Signed-off-by:
-
Michael Krufky authored
Add new standby mode: TDA18271_STANDBY_LT_ON = slave tuner output loop thru on w/ xtal osc off Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
By default, the driver enters standby mode with slave tuner output loop thru enabled and xtal oscillator on. Not all designs require that slave tuner output loop thru and xtal oscillator remain active while in standby mode, so two additional standby modes have been added: - standby mode with xtal oscillator on (loop thru off) - total power off Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Remove an extra line that it is not needed Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
The V4L and DVB API's are there for a long time. however, up to now, no efforts were done to merge them to kernel DocBook. This patch adds the current versions of the specs as an unique compendium. Signed-off-by: -
Antti Palosaari authored
And mask should be 0xff00 instead of 0xae00. Thanks to Jochen Friedrich <jochen@scram.de> for pointing this. Cc: Jochen Friedrich <jochen@scram.de> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
* define names for few values * decrease buffer len by one byte which was not used * add check for buffer overflow for sure * indentation fixes * remove useless 0 len check from memcpy It should not happen and if it happens memcpy should not do anything. Signed-off-by:
-
Antti Palosaari authored
Fix wrongly configured USB1.1 TS EP. Patch serie also increases USB URB size to reduce wakeups. USB1.1 URB size from 64 to 940 bytes USB2.0 URB size from 512 to 16356 bytes Signed-off-by:
-
Jose Alberto Reguero authored
Fix wrongly configured USB2.0 TS EP. Signed-off-by:
Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by:
-
Antti Palosaari authored
Add af9015 firmware to get_dvb_firmware script. Firmware version is 4.95.0.0. Signed-off-by:
-
Devin Heitmueller authored
Remove unused variable from when I introduced the g_std() function. This work was sponsored by EyeMagnet Limited. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Devin Heitmueller authored
Remove redundant call to set the vinctrl register. This eliminates any ambiguity as to how the register is configured (since it is now always set in em28xx_set_outfmt). This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
We need to implement the g_std call, or else the default norm always gets returned, which breaks VBI capturing if you had changed the standard to NTSC using s_std. I had temporarily changed the default norm to NTSC so that zvbi-ntsc-cc wouldn't choke, so now that we are returning the correct value, switch it back to PAL as the default. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Change the code so we only claim to support VBI if the underlying chipset actually has the support. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Do not create the VBI device in cases where VBI is not supported on the target em28xx chip. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Remove an unreferenced variable introduced during the VBI introduction. Signed-off-by:
-
Devin Heitmueller authored
The current locking infrastructure didn't support having multiple fds accessing the device (such as video and vbi). Rework the locking infrastructure, borrowing the design from cx88. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
When adding support for both video and VBI, I missed the mmap ioctl. Add the missing call. Signed-off-by:
-
Devin Heitmueller authored
Add support for raw VBI capture for the em28xx bridge, currently only for NTSC. Support for PAL capture to follow shortly (including the removal of numerous hard-coded NTSC-specific sizes for capture buffers, etc). Note that the code currently changes the default current norm from PAL to NTSC (so that zvbi-ntsc-cc works properly). The default norm really should be moved into a board-level parameter. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Add code enabling the VBI registers for variants of the em28xx chip that support VBI, and make sure the isoc streaming code continues to work for the video component of the stream (note the video and vbi data arrive intermixed on the same isoc pipe). Note that this version just drops the actual VBI data onto the floor as opposed to processing it. The "#ifdef 0" tags are for the videobuf code that appears in the next patch in this series. We created a separate version of the isoc_copy version for parsing the version of the stream that includes VBI data. In theory, they might be able to be merged at some point in the future, but the initial goal is to ensure that we do not cause any regressions with devices that do not have VBI support. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Properly document the video input control register, in preparation for the addition of VBI support. Note this patch makes no functional changes. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Lindent caused some compilation breakages. There were also others related to some other changes at kernel KABI. There's still one missing warning fix against 2.6.30: /home/v4l/cx25821/v4l/cx25821-alsa.c: In function 'cx25821_audio_initdev': /home/v4l/cx25821/v4l/cx25821-alsa.c:706: warning: 'snd_card_new' is deprecated (declared at include/sound/core.h:306) Signed-off-by: -
Mauro Carvalho Chehab authored
The original driver were generated with some dos editor, and used their own coding style. This patch does some automatic CodingStyle fixes, by running dos2unix and Lindent tools. More work still needs to be done for it to use upstream CodingStyle. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
/home/v4l/master/v4l/cx25821-audups11.c:99: error: implicit declaration of function 'lock_kernel' /home/v4l/master/v4l/cx25821-audups11.c:112: error: implicit declaration of function 'unlock_kernel' Signed-off-by: -
Mauro Carvalho Chehab authored
GIT_BRANCH=devel GIT_AUTHOR_DATE=1252851239 GIT_AUTHOR_NAME=Palash Bandyopadhyay GIT_AUTHOR_EMAIL=Palash.Bandyopadhyay@conexant.com Add conexant cx25821 driver release v106 of the Athena driver. Signed-off-by:
Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com> Signed-off-by:
-
- 18 Sep, 2009 5 commits
-
-
Linus Torvalds authored
Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits) x86: Move get/set_wallclock to x86_platform_ops x86: platform: Fix section annotations x86: apic namespace cleanup x86: Distangle ioapic and i8259 x86: Add Moorestown early detection x86: Add hardware_subarch ID for Moorestown x86: Add early platform detection x86: Move tsc_init to late_time_init x86: Move tsc_calibration to x86_init_ops x86: Replace the now identical time_32/64.c by time.c x86: time_32/64.c unify profile_pc x86: Move calibrate_cpu to tsc.c x86: Make timer setup and global variables the same in time_32/64.c x86: Remove mca bus ifdef from timer interrupt x86: Simplify timer_ack magic in time_32.c x86: Prepare unification of time_32/64.c x86: Remove do_timer hook x86: Add timer_init to x86_init_ops x86: Move percpu clockevents setup to x86_init_ops x86: Move xen_post_allocator_init into xen_pagetable_setup_done ... Fix up conflicts in arch/x86/include/asm/io_apic.h
-
Geoffrey Thomas authored
Signed-off-by:
Geoffrey Thomas <geofft@ksplice.com> Signed-off-by:
Tim Abbott <tabbott@ksplice.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nelson Elhage authored
This is largely a straightforward conversion. The patch results in fewer output sections, and some data being reordered, but should have no functional impact. Also, note that this patch moves some data (namely, init_task and cacheline-aligned) inside [_sdata,_edata]. Because frv already builds using -ffunction-sections -fdata-sections, we can't use BSS_SECTION or RW_DATA_SECTION yet, since they do not currently include the required .bss.* and .data.* sections. Signed-off-by:
Nelson Elhage <nelhage@ksplice.com> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Nelson Elhage authored
It appears that frv copied the .altinstructions definitions in its linker script from x86. Since frv doesn't put anything in those sections, this is just dead code. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (64 commits) ext4: Update documentation about quota mount options ext4: replace MAX_DEFRAG_SIZE with EXT_MAX_BLOCK ext4: Fix the alloc on close after a truncate hueristic ext4: Add a tracepoint for ext4_alloc_da_blocks() ext4: store EXT4_EXT_MIGRATE in i_state instead of i_flags ext4: limit block allocations for indirect-block files to < 2^32 ext4: Fix different block exchange issue in EXT4_IOC_MOVE_EXT ext4: Add null extent check to ext_get_path ext4: Replace BUG_ON() with ext4_error() in move_extents.c ext4: Replace get_ext_path macro with an inline funciton ext4: Fix include/trace/events/ext4.h to work with Systemtap ext4: Fix initalization of s_flex_groups ext4: Always set dx_node's fake_dirent explicitly. ext4: Fix async commit mode to be safe by using a barrier ext4: Don't update superblock write time when filesystem is read-only ext4: Clarify the locking details in mballoc ext4: check for need init flag in ext4_mb_load_buddy ext4: move ext4_mb_init_group() function earlier in the mballoc.c ext4: Make non-journal fsync work properly ext4: Assure that metadata blocks are written during fsync in no journal mode ...
-
