1. 04 Nov, 2018 10 commits
    • Tobias Jungel's avatar
      bonding: fix length of actor system · 655b0860
      Tobias Jungel authored
      [ Upstream commit 414dd6fb ]
      
      The attribute IFLA_BOND_AD_ACTOR_SYSTEM is sent to user space having the
      length of sizeof(bond->params.ad_actor_system) which is 8 byte. This
      patch aligns the length to ETH_ALEN to have the same MAC address exposed
      as using sysfs.
      
      Fixes: f87fda00 ("bonding: prevent out of bound accesses")
      Signed-off-by: default avatarTobias Jungel <tobias.jungel@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      655b0860
    • Jason Wang's avatar
      vhost: Fix Spectre V1 vulnerability · 26ab2eb8
      Jason Wang authored
      [ Upstream commit ff002269 ]
      
      The idx in vhost_vring_ioctl() was controlled by userspace, hence a
      potential exploitation of the Spectre variant 1 vulnerability.
      
      Fixing this by sanitizing idx before using it to index d->vqs.
      
      Cc: Michael S. Tsirkin <mst@redhat.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Signed-off-by: default avatarJason Wang <jasowang@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      26ab2eb8
    • Ido Schimmel's avatar
      rtnetlink: Disallow FDB configuration for non-Ethernet device · 2799b518
      Ido Schimmel authored
      [ Upstream commit da715775 ]
      
      When an FDB entry is configured, the address is validated to have the
      length of an Ethernet address, but the device for which the address is
      configured can be of any type.
      
      The above can result in the use of uninitialized memory when the address
      is later compared against existing addresses since 'dev->addr_len' is
      used and it may be greater than ETH_ALEN, as with ip6tnl devices.
      
      Fix this by making sure that FDB entries are only configured for
      Ethernet devices.
      
      BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863
      CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
      Google 01/01/2011
      Call Trace:
        __dump_stack lib/dump_stack.c:77 [inline]
        dump_stack+0x14b/0x190 lib/dump_stack.c:113
        kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956
        __msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645
        memcmp+0x11d/0x180 lib/string.c:863
        dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464
        ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline]
        rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558
        rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715
        netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454
        rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733
        netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
        netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343
        netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908
        sock_sendmsg_nosec net/socket.c:621 [inline]
        sock_sendmsg net/socket.c:631 [inline]
        ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
        __sys_sendmsg net/socket.c:2152 [inline]
        __do_sys_sendmsg net/socket.c:2161 [inline]
        __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
        __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
        do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
        entry_SYSCALL_64_after_hwframe+0x63/0xe7
      RIP: 0033:0x440ee9
      Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7
      48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
      ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
      RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
      RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9
      RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003
      RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8
      R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0
      R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000
      
      Uninit was created at:
        kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline]
        kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181
        kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91
        kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100
        slab_post_alloc_hook mm/slab.h:446 [inline]
        slab_alloc_node mm/slub.c:2718 [inline]
        __kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351
        __kmalloc_reserve net/core/skbuff.c:138 [inline]
        __alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206
        alloc_skb include/linux/skbuff.h:996 [inline]
        netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline]
        netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883
        sock_sendmsg_nosec net/socket.c:621 [inline]
        sock_sendmsg net/socket.c:631 [inline]
        ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
        __sys_sendmsg net/socket.c:2152 [inline]
        __do_sys_sendmsg net/socket.c:2161 [inline]
        __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
        __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
        do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
        entry_SYSCALL_64_after_hwframe+0x63/0xe7
      
      v2:
      * Make error message more specific (David)
      
      Fixes: 090096bf ("net: generic fdb support for drivers without ndo_fdb_<op>")
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Reported-and-tested-by: syzbot+3a288d5f5530b901310e@syzkaller.appspotmail.com
      Reported-and-tested-by: syzbot+d53ab4e92a1db04110ff@syzkaller.appspotmail.com
      Cc: Vlad Yasevich <vyasevich@gmail.com>
      Cc: David Ahern <dsahern@gmail.com>
      Reviewed-by: default avatarDavid Ahern <dsahern@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2799b518
    • Karsten Graul's avatar
      Revert "net: simplify sock_poll_wait" · fd54c188
      Karsten Graul authored
      [ Upstream commit 89ab066d ]
      
      This reverts commit dd979b4d.
      
      This broke tcp_poll for SMC fallback: An AF_SMC socket establishes an
      internal TCP socket for the initial handshake with the remote peer.
      Whenever the SMC connection can not be established this TCP socket is
      used as a fallback. All socket operations on the SMC socket are then
      forwarded to the TCP socket. In case of poll, the file->private_data
      pointer references the SMC socket because the TCP socket has no file
      assigned. This causes tcp_poll to wait on the wrong socket.
      Signed-off-by: default avatarKarsten Graul <kgraul@linux.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fd54c188
    • Sean Tranchetti's avatar
      net: udp: fix handling of CHECKSUM_COMPLETE packets · 4fb0dc97
      Sean Tranchetti authored
      [ Upstream commit db4f1be3 ]
      
      Current handling of CHECKSUM_COMPLETE packets by the UDP stack is
      incorrect for any packet that has an incorrect checksum value.
      
      udp4/6_csum_init() will both make a call to
      __skb_checksum_validate_complete() to initialize/validate the csum
      field when receiving a CHECKSUM_COMPLETE packet. When this packet
      fails validation, skb->csum will be overwritten with the pseudoheader
      checksum so the packet can be fully validated by software, but the
      skb->ip_summed value will be left as CHECKSUM_COMPLETE so that way
      the stack can later warn the user about their hardware spewing bad
      checksums. Unfortunately, leaving the SKB in this state can cause
      problems later on in the checksum calculation.
      
      Since the the packet is still marked as CHECKSUM_COMPLETE,
      udp_csum_pull_header() will SUBTRACT the checksum of the UDP header
      from skb->csum instead of adding it, leaving us with a garbage value
      in that field. Once we try to copy the packet to userspace in the
      udp4/6_recvmsg(), we'll make a call to skb_copy_and_csum_datagram_msg()
      to checksum the packet data and add it in the garbage skb->csum value
      to perform our final validation check.
      
      Since the value we're validating is not the proper checksum, it's possible
      that the folded value could come out to 0, causing us not to drop the
      packet. Instead, we believe that the packet was checksummed incorrectly
      by hardware since skb->ip_summed is still CHECKSUM_COMPLETE, and we attempt
      to warn the user with netdev_rx_csum_fault(skb->dev);
      
      Unfortunately, since this is the UDP path, skb->dev has been overwritten
      by skb->dev_scratch and is no longer a valid pointer, so we end up
      reading invalid memory.
      
      This patch addresses this problem in two ways:
      	1) Do not use the dev pointer when calling netdev_rx_csum_fault()
      	   from skb_copy_and_csum_datagram_msg(). Since this gets called
      	   from the UDP path where skb->dev has been overwritten, we have
      	   no way of knowing if the pointer is still valid. Also for the
      	   sake of consistency with the other uses of
      	   netdev_rx_csum_fault(), don't attempt to call it if the
      	   packet was checksummed by software.
      
      	2) Add better CHECKSUM_COMPLETE handling to udp4/6_csum_init().
      	   If we receive a packet that's CHECKSUM_COMPLETE that fails
      	   verification (i.e. skb->csum_valid == 0), check who performed
      	   the calculation. It's possible that the checksum was done in
      	   software by the network stack earlier (such as Netfilter's
      	   CONNTRACK module), and if that says the checksum is bad,
      	   we can drop the packet immediately instead of waiting until
      	   we try and copy it to userspace. Otherwise, we need to
      	   mark the SKB as CHECKSUM_NONE, since the skb->csum field
      	   no longer contains the full packet checksum after the
      	   call to __skb_checksum_validate_complete().
      
      Fixes: e6afc8ac ("udp: remove headers from UDP packets before queueing")
      Fixes: c84d9490 ("udp: copy skb->truesize in the first cache line")
      Cc: Sam Kumar <samanthakumar@google.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarSean Tranchetti <stranche@codeaurora.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4fb0dc97
    • Niklas Cassel's avatar
      net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules · b4f003cb
      Niklas Cassel authored
      [ Upstream commit 30549aab ]
      
      When building stmmac, it is only possible to select CONFIG_DWMAC_GENERIC,
      or any of the glue drivers, when CONFIG_STMMAC_PLATFORM is set.
      The only exception is CONFIG_STMMAC_PCI.
      
      When calling of_mdiobus_register(), it will call our ->reset()
      callback, which is set to stmmac_mdio_reset().
      
      Most of the code in stmmac_mdio_reset() is protected by a
      "#if defined(CONFIG_STMMAC_PLATFORM)", which will evaluate
      to false when CONFIG_STMMAC_PLATFORM=m.
      
      Because of this, the phy reset gpio will only be pulled when
      stmmac is built as built-in, but not when built as modules.
      
      Fix this by using "#if IS_ENABLED()" instead of "#if defined()".
      Signed-off-by: default avatarNiklas Cassel <niklas.cassel@linaro.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b4f003cb
    • Jakub Kicinski's avatar
      net: sched: gred: pass the right attribute to gred_change_table_def() · 917629e6
      Jakub Kicinski authored
      [ Upstream commit 38b4f18d ]
      
      gred_change_table_def() takes a pointer to TCA_GRED_DPS attribute,
      and expects it will be able to interpret its contents as
      struct tc_gred_sopt.  Pass the correct gred attribute, instead of
      TCA_OPTIONS.
      
      This bug meant the table definition could never be changed after
      Qdisc was initialized (unless whatever TCA_OPTIONS contained both
      passed netlink validation and was a valid struct tc_gred_sopt...).
      
      Old behaviour:
      $ ip link add type dummy
      $ tc qdisc replace dev dummy0 parent root handle 7: \
           gred setup vqs 4 default 0
      $ tc qdisc replace dev dummy0 parent root handle 7: \
           gred setup vqs 4 default 0
      RTNETLINK answers: Invalid argument
      
      Now:
      $ ip link add type dummy
      $ tc qdisc replace dev dummy0 parent root handle 7: \
           gred setup vqs 4 default 0
      $ tc qdisc replace dev dummy0 parent root handle 7: \
           gred setup vqs 4 default 0
      $ tc qdisc replace dev dummy0 parent root handle 7: \
           gred setup vqs 4 default 0
      
      Fixes: f62d6b93 ("[PKT_SCHED]: GRED: Use central VQ change procedure")
      Signed-off-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      917629e6
    • Eric Dumazet's avatar
      net/mlx5e: fix csum adjustments caused by RXFCS · c5eebcf0
      Eric Dumazet authored
      [ Upstream commit d48051c5 ]
      
      As shown by Dmitris, we need to use csum_block_add() instead of csum_add()
      when adding the FCS contribution to skb csum.
      
      Before 4.18 (more exactly commit 88078d98 "net: pskb_trim_rcsum()
      and CHECKSUM_COMPLETE are friends"), the whole skb csum was thrown away,
      so RXFCS changes were ignored.
      
      Then before commit d55bef50 ("net: fix pskb_trim_rcsum_slow() with
      odd trim offset") both mlx5 and pskb_trim_rcsum_slow() bugs were canceling
      each other.
      
      Now we fixed pskb_trim_rcsum_slow() we need to fix mlx5.
      
      Note that this patch also rewrites mlx5e_get_fcs() to :
      
      - Use skb_header_pointer() instead of reinventing it.
      - Use __get_unaligned_cpu32() to avoid possible non aligned accesses
        as Dmitris pointed out.
      
      Fixes: 902a5459 ("net/mlx5e: When RXFCS is set, add FCS data into checksum calculation")
      Reported-by: default avatarPaweł Staszewski <pstaszewski@itcare.pl>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Eran Ben Elisha <eranbe@mellanox.com>
      Cc: Saeed Mahameed <saeedm@mellanox.com>
      Cc: Dimitris Michailidis <dmichail@google.com>
      Cc: Cong Wang <xiyou.wangcong@gmail.com>
      Cc: Paweł Staszewski <pstaszewski@itcare.pl>
      Reviewed-by: default avatarEran Ben Elisha <eranbe@mellanox.com>
      Tested-By: default avatarMaria Pasechnik <mariap@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c5eebcf0
    • Stefano Brivio's avatar
      ipv6/ndisc: Preserve IPv6 control buffer if protocol error handlers are called · dc31623a
      Stefano Brivio authored
      [ Upstream commit ee1abcf6 ]
      
      Commit a61bbcf2 ("[NET]: Store skb->timestamp as offset to a base
      timestamp") introduces a neighbour control buffer and zeroes it out in
      ndisc_rcv(), as ndisc_recv_ns() uses it.
      
      Commit f2776ff0 ("[IPV6]: Fix address/interface handling in UDP and
      DCCP, according to the scoping architecture.") introduces the usage of the
      IPv6 control buffer in protocol error handlers (e.g. inet6_iif() in
      present-day __udp6_lib_err()).
      
      Now, with commit b94f1c09 ("ipv6: Use icmpv6_notify() to propagate
      redirect, instead of rt6_redirect()."), we call protocol error handlers
      from ndisc_redirect_rcv(), after the control buffer is already stolen and
      some parts are already zeroed out. This implies that inet6_iif() on this
      path will always return zero.
      
      This gives unexpected results on UDP socket lookup in __udp6_lib_err(), as
      we might actually need to match sockets for a given interface.
      
      Instead of always claiming the control buffer in ndisc_rcv(), do that only
      when needed.
      
      Fixes: b94f1c09 ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect().")
      Signed-off-by: default avatarStefano Brivio <sbrivio@redhat.com>
      Reviewed-by: default avatarSabrina Dubroca <sd@queasysnail.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      dc31623a
    • Hangbin Liu's avatar
      bridge: do not add port to router list when receives query with source 0.0.0.0 · 0f216d94
      Hangbin Liu authored
      [ Upstream commit 5a2de63f ]
      
      Based on RFC 4541, 2.1.1.  IGMP Forwarding Rules
      
        The switch supporting IGMP snooping must maintain a list of
        multicast routers and the ports on which they are attached.  This
        list can be constructed in any combination of the following ways:
      
        a) This list should be built by the snooping switch sending
           Multicast Router Solicitation messages as described in IGMP
           Multicast Router Discovery [MRDISC].  It may also snoop
           Multicast Router Advertisement messages sent by and to other
           nodes.
      
        b) The arrival port for IGMP Queries (sent by multicast routers)
           where the source address is not 0.0.0.0.
      
      We should not add the port to router list when receives query with source
      0.0.0.0.
      Reported-by: default avatarYing Xu <yinxu@redhat.com>
      Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
      Acked-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Acked-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0f216d94
  2. 22 Oct, 2018 8 commits
  3. 21 Oct, 2018 3 commits
  4. 20 Oct, 2018 11 commits
  5. 19 Oct, 2018 8 commits
    • Masami Hiramatsu's avatar
      selftests: ftrace: Add synthetic event syntax testcase · ba0e41ca
      Masami Hiramatsu authored
      Add a testcase to check the syntax and field types for
      synthetic_events interface.
      
      Link: http://lkml.kernel.org/r/153986838264.18251.16627517536956299922.stgit@devboxAcked-by: default avatarShuah Khan <shuah@kernel.org>
      Signed-off-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
      Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      ba0e41ca
    • Masami Hiramatsu's avatar
      tracing: Fix synthetic event to allow semicolon at end · a360d9e4
      Masami Hiramatsu authored
      Fix synthetic event to allow independent semicolon at end.
      
      The synthetic_events interface accepts a semicolon after the
      last word if there is no space.
      
       # echo "myevent u64 var;" >> synthetic_events
      
      But if there is a space, it returns an error.
      
       # echo "myevent u64 var ;" > synthetic_events
       sh: write error: Invalid argument
      
      This behavior is difficult for users to understand. Let's
      allow the last independent semicolon too.
      
      Link: http://lkml.kernel.org/r/153986835420.18251.2191216690677025744.stgit@devbox
      
      Cc: Shuah Khan <shuah@kernel.org>
      Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
      Cc: stable@vger.kernel.org
      Fixes: commit 4b147936 ("tracing: Add support for 'synthetic' events")
      Signed-off-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
      Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      a360d9e4
    • Masami Hiramatsu's avatar
      tracing: Fix synthetic event to accept unsigned modifier · 282447ba
      Masami Hiramatsu authored
      Fix synthetic event to accept unsigned modifier for its field type
      correctly.
      
      Currently, synthetic_events interface returns error for "unsigned"
      modifiers as below;
      
       # echo "myevent unsigned long var" >> synthetic_events
       sh: write error: Invalid argument
      
      This is because argv_split() breaks "unsigned long" into "unsigned"
      and "long", but parse_synth_field() doesn't expected it.
      
      With this fix, synthetic_events can handle the "unsigned long"
      correctly like as below;
      
       # echo "myevent unsigned long var" >> synthetic_events
       # cat synthetic_events
       myevent	unsigned long var
      
      Link: http://lkml.kernel.org/r/153986832571.18251.8448135724590496531.stgit@devbox
      
      Cc: Shuah Khan <shuah@kernel.org>
      Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
      Cc: stable@vger.kernel.org
      Fixes: commit 4b147936 ("tracing: Add support for 'synthetic' events")
      Signed-off-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
      Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      282447ba
    • David S. Miller's avatar
      Revert "bond: take rcu lock in netpoll_send_skb_on_dev" · 48995423
      David S. Miller authored
      This reverts commit 6fe94878.
      
      It is causing more serious regressions than the RCU warning
      it is fixing.
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      48995423
    • Greg Kroah-Hartman's avatar
      Merge tag 'usb-4.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · c7b70a64
      Greg Kroah-Hartman authored
      I wrote:
        "USB fixes for 4.19-final
      
         Here are a small number of last-minute USB driver fixes
      
         Included here are:
           - spectre fix for usb storage gadgets
           - xhci fixes
           - cdc-acm fixes
           - usbip fixes for reported problems
      
         All of these have been in linux-next with no reported issues."
      
      * tag 'usb-4.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
        usb: gadget: storage: Fix Spectre v1 vulnerability
        USB: fix the usbfs flag sanitization for control transfers
        usb: xhci: pci: Enable Intel USB role mux on Apollo Lake platforms
        usb: roles: intel_xhci: Fix Unbalanced pm_runtime_enable
        cdc-acm: correct counting of UART states in serial state notification
        cdc-acm: do not reset notification buffer index upon urb unlinking
        cdc-acm: fix race between reset and control messaging
        usb: usbip: Fix BUG: KASAN: slab-out-of-bounds in vhci_hub_control()
        selftests: usbip: add wait after attach and before checking port status
      c7b70a64
    • Greg Kroah-Hartman's avatar
      Merge tag 'for-linus-20181019' of git://git.kernel.dk/linux-block · b2a205ff
      Greg Kroah-Hartman authored
      Jens writes:
        "Block fixes for 4.19-final
      
         Two small fixes that should go into this release."
      
      * tag 'for-linus-20181019' of git://git.kernel.dk/linux-block:
        block: don't deal with discard limit in blkdev_issue_discard()
        nvme: remove ns sibling before clearing path
      b2a205ff
    • Boris Brezillon's avatar
      drm/sun4i: Fix an ulong overflow in the dotclock driver · e84cb605
      Boris Brezillon authored
      The calculated ideal rate can easily overflow an unsigned long, thus
      making the best div selection buggy as soon as no ideal match is found
      before the overflow occurs.
      
      Fixes: 4731a72d ("drm/sun4i: request exact rates to our parents")
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarBoris Brezillon <boris.brezillon@bootlin.com>
      Acked-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
      Signed-off-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181018100250.12565-1-boris.brezillon@bootlin.com
      e84cb605
    • Greg Kroah-Hartman's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 91b15613
      Greg Kroah-Hartman authored
      David writes:
        "Networking
      
         1) Fix gro_cells leak in xfrm layer, from Li RongQing.
      
         2) BPF selftests change RLIMIT_MEMLOCK blindly, don't do that.  From
            Eric Dumazet.
      
         3) AF_XDP calls synchronize_net() under RCU lock, fix from Björn
            Töpel.
      
         4) Out of bounds packet access in _decode_session6(), from Alexei
            Starovoitov.
      
         5) Several ethtool bugs, where we copy a struct into the kernel twice
            and our validations of the values in the first copy can be
            invalidated by the second copy due to asynchronous updates to the
            memory by the user.  From Wenwen Wang.
      
         6) Missing netlink attribute validation in cls_api, from Davide
            Caratti.
      
         7) LLC SAP sockets neet to be SOCK_RCU FREE, from Cong Wang.
      
         8) rxrpc operates on wrong kvec, from Yue Haibing.
      
         9) A regression was introduced by the disassosciation of route
            neighbour references in rt6_probe(), causing probe for
            neighbourless routes to not be properly rate limited.  Fix from
            Sabrina Dubroca.
      
         10) Unsafe RCU locking in tipc, from Tung Nguyen.
      
         11) Use after free in inet6_mc_check(), from Eric Dumazet.
      
         12) PMTU from icmp packets should update the SCTP transport pathmtu,
             from Xin Long.
      
         13) Missing peer put on error in rxrpc, from David Howells.
      
         14) Fix pedit in nfp driver, from Pieter Jansen van Vuuren.
      
         15) Fix overflowing shift statement in qla3xxx driver, from Nathan
             Chancellor.
      
         16) Fix Spectre v1 in ptp code, from Gustavo A. R. Silva.
      
         17) udp6_unicast_rcv_skb() interprets udpv6_queue_rcv_skb() return
             value in an inverted manner, fix from Paolo Abeni.
      
         18) Fix missed unresolved entries in ipmr dumps, from Nikolay
             Aleksandrov.
      
         19) Fix NAPI handling under high load, we can completely miss events
             when NAPI has to loop more than one time in a cycle.  From Heiner
             Kallweit."
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits)
        ip6_tunnel: Fix encapsulation layout
        tipc: fix info leak from kernel tipc_event
        net: socket: fix a missing-check bug
        net: sched: Fix for duplicate class dump
        r8169: fix NAPI handling under high load
        net: ipmr: fix unresolved entry dumps
        net: mscc: ocelot: Fix comment in ocelot_vlant_wait_for_completion()
        sctp: fix the data size calculation in sctp_data_size
        virtio_net: avoid using netif_tx_disable() for serializing tx routine
        udp6: fix encap return code for resubmitting
        mlxsw: core: Fix use-after-free when flashing firmware during init
        sctp: not free the new asoc when sctp_wait_for_connect returns err
        sctp: fix race on sctp_id2asoc
        r8169: re-enable MSI-X on RTL8168g
        net: bpfilter: use get_pid_task instead of pid_task
        ptp: fix Spectre v1 vulnerability
        net: qla3xxx: Remove overflowing shift statement
        geneve, vxlan: Don't set exceptions if skb->len < mtu
        geneve, vxlan: Don't check skb_dst() twice
        sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL instead
        ...
      91b15613