1. 29 Dec, 2015 17 commits
  2. 17 Dec, 2015 2 commits
    • Tomi Valkeinen's avatar
      OMAPDSS: DISPC: always set ALIGN when available · e5f80917
      Tomi Valkeinen authored
      By default DISPC asserts hsync and vsync sequentially, i.e. there's
      first hsync and that is immediately followed by vsync. This is the only
      available behaviour on OMAP2/3, and default behaviour on OMAP4+.
      
      OMAP4+ has ALIGN bit in POL_FREQ register, which makes DISPC assert both
      syncs at the same time.
      
      It has been observed that some panels don't like sequential syncs (AM5
      EVM's panel). After studying the datasheets for multiple panels and
      encoders, and MIPI DPI spec, it looks like there is no standard way to
      handle this.
      
      Sometimes the datasheets don't mention the required syncs behaviour at
      all, sometimes the datasheets have images that hint towards simultaneous
      syncs, and sometimes it is explicitly mentioned that simultaneous syncs
      are needed. No panels or encoders requiring sequential sync was found.
      
      It thus seems to be safe to default to simultaneous syncs when the ALIGN
      bit is available. This fixed AM5 EVM's panel, and no side effects have
      been observed on other panels or encoders.
      Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
      Acked-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
      e5f80917
    • Dave Gerlach's avatar
      OMAPDSS: adopt pinctrl support · 5038bb8c
      Dave Gerlach authored
      Update omapdss driver to set the state of the pins to:
      - "default on resume
      - "sleep" on suspend
      
      By optionally putting the pins into sleep state in the suspend callback
      we can accomplish two things.
      - minimize current leakage from pins and thus save power,
      - prevent the IP from driving pins output in an uncontrolled manner,
      which may happen if the power domain drops the domain regulator.
      Signed-off-by: default avatarDave Gerlach <d-gerlach@ti.com>
      Acked-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
      Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
      5038bb8c
  3. 15 Dec, 2015 13 commits
  4. 14 Dec, 2015 1 commit
  5. 13 Dec, 2015 7 commits