- 07 Nov, 2005 10 commits
-
-
Francois Romieu authored
There is no need to save/restore the irq state as the irq are always locally disabled when b44_interrupt is issued. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Francois Romieu authored
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Francois Romieu authored
- remove unneeded forward declarations - s/kmalloc + memset/kzalloc/ - whitespace readjustement can't hurt - wrong comment: b44_init_rings _is_ called with a spinlock held in b44_{open/set_ringparam/set_pauseparam/etc}. Actually, it does not need to be able to sleep - b44_remove_one() can not be issued with a NULL device in its private member: remove the test. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Francois Romieu authored
The patch simply factors out the release of the lock. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Jeff Garzik authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Benjamin Herrenschmidt authored
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 06 Nov, 2005 29 commits
-
-
Russell King authored
glibc expects to count lines beginning with "processor" to determine the number of processors, not lines beginning with "Processor". So, give glibc the format it expects. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
We don't want to call dump_cpu_info() from cpu_init() after boot since it produces a lot of unnecessary noise - since cpu_init() gets called on resume and hotplug cpu insertion events. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
// disagrees with ld's script parsing ability. Don't use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Richard Purdie authored
Patch from Richard Purdie Update the PXA pm.c file to allow machines (such as the Sharp Zaurus) to override the standard pm functions but reuse/wrap them where needed. The init call is made slightly earlier to give machine code an init level to override them in removing any race. Signed-off-by: Richard Purdie Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
Patch from Nicolas Pitre Since we know the value of cpsr on entry, we can replace the bic+orr with a single eor. Also remove a possible result delay (at least on XScale). Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek Make the uengine loader use ixp2000_reg_wrb in the right places. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Alessandro Zummo authored
Patch from Alessandro Zummo This patch fixes AHB/PCI endianness problems when the processor is in little-endian mode. The patch configures the CSR register closely following the directives in [1], paragraph 4.1, page 19. According to the considerations in [1], page 11, while the AHB bus supports both endian modes, on the IXP4XX it always uses big-endian. The PCI bus is connected to the South AHB. A wrong setting in the CSR register will thus cause a malfunctional PCI bus. A schematic diagram of the bus interconnections on the IXP4XX can be found in [1], page 18. The patch has been verified to work on the NSLU2 in both LE and BE modes. The author is Peter Korsgaard. [1] Intel
® IXP4XX Product Line of Network Processors and IXC1100 Control Plane Processor: Understanding Big Endian and Little Endian Modes http://www.intel.com/design/network/applnots/25423701.pdfSigned-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> -
Dirk Opfer authored
Patch from Dirk Opfer This patch adds basic machine support for the Sharp SL-6000x (Tosa) PDAs. Signed-off-by: Dirk Opfer Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Sam Ravnborg authored
From: Than Ngo <than@redhat.com> qt as installed on fedora core (2 and 3) does not work with vanilla kernel. The linker fails to locate the qt lib: Actual Results: # make xconfig HOSTLD scripts/kconfig/qconf /usr/bin/ld: cannot find -lqt collect2: ld returned 1 exit status Than Ngo has provided following fix for the bug. Cc: Than Ngo <than@redhat.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
-
Russell King authored
Include autoconf.h into every kernel compilation via the gcc command line using -imacros. This ensures that we have the kernel configuration included from the start, rather than relying on each file having #include <linux/config.h> as appropriate. History has shown that this is something which is difficult to get right. Since we now include the kernel configuration automatically, make configcheck becomes meaningless, so remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
-
Pantelis Antoniou authored
The offsets of the registers are in a different place, and some parts cannot handle a full set of modem control signals. Signed-off-by: Pantelis Antoniou <pantelis@embeddedalley.ocm> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Jeff Garzik authored
From Andrew Morton.
-
Jeff Garzik authored
-
Jeff Garzik authored
Unused, and causes the files to be needlessly rebuilt in some cases.
-
-
Adrian Bunk authored
This patch creates a file airo.h containing prototypes of the global functions in airo.c used by airo_cs.c . If you got strange problems with either airo_cs devices or in any other completely unrelated part of the kernel shortly or long after a airo_cs device was detected by the kernel, this might have been caused by the fact that caller and callee disagreed regarding the size of the first argument to init_airo_card()... Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Chan authored
Some book keeping and a style fix. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Chan authored
Refine bnx2_poll() logic to write back the most up-to-date status tag when all work has been processed. This eliminates some occasional extra interrupts when a older status tag is written even though all work has been processed. The idea is to read the status tag just before exiting bnx2_poll() and then check again for any new work. If no new work is pending, the status tag written back will not generate any extra interrupt. This logic is similar to the changes David Miller did to tg3_poll(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Chan authored
Dynamically determine the shared memory location where eeprom parameters are stored instead of using a fixed location. Add speed reporting to management firmware. This allows management firmware to know the current speed without contending for MII registers. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Chan authored
Update bnx2 nvram code with support for 5708. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Chan authored
Update bnx2 firmware with support for 5708. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Chan authored
Add 5708 copper and serdes basic support, including 2.5 Gbps support on 5708 serdes. SPEED_2500 is also added to ethtool.h Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Daniel Drake authored
The last patch I sent in ("prism54: Free skb after disabling interrupts") included a redundant NULL assignment. Thanks to Herbert Xu for pointing it out. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Adrian Bunk authored
It seems dmascc_setup() is a leftover time before dmascc_init() was there. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Adrian Bunk authored
This patch contains the following possible cleanups: - make needlessly global code static - #if 0 the following unused global functions: - e1000_hw.c: e1000_mc_addr_list_update - e1000_hw.c: e1000_read_reg_io - e1000_hw.c: e1000_enable_pciex_master Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Adrian Bunk authored
This patch makes some needlessly global code static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bart Oldeman authored
my patch "x86: initialise tss->io_bitmap_owner to something" (commit ID d5cd4aad) introduced a problem with a program (DOSEMU) that called ioperm after already doing some port i/o. The problem is that a process switch return causes tss->io_bitmap_base to be set to IO_BITMAP_OFFSET so that the fault (that *really* sets the io bitmap) never triggers. This fixes that regression. Signed-off-by: Bart Oldeman <bartoldeman@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 05 Nov, 2005 1 commit
-
-
Samuel Thibault authored
Some visually impaired people use hardware devices which directly read the vga screen. When newt for instance asks to hide the cursor for better visual aspect, the kernel puts the vga cursor out of the screen, so that the cursor position can't be read by the hardware device. This is a great loss for such people. Here is a patch which uses the same technique as CUR_NONE for hiding the cursor while still moving it. Mario, you should apply it to the speakup kernel for access floppies asap. I'll submit a 2.4 patch too. Signed-off-by: samuel.thibault@ens-lyon.org Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-