- 23 Mar, 2017 1 commit
-
-
Dave Airlie authored
Linux 4.11-rc3 as requested by Daniel
-
- 22 Mar, 2017 2 commits
-
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
drm-misc for 4.12, 2nd attempt this week: - topic branch from Jon Corbet for the new graph kerneldoc support - lots of graphs for kms/atomic things using the above - some vblank query tuning from Chris - gem/cma_fops macros - moar docs Driver stuff: - vc4 hdmi audio, yay (Eric) - dw-hdmi polish from a bunch of people - some rockchip dp updates that didn't make last week (Chris Zhong) - misc bridge&driver updates * tag 'drm-misc-next-2017-03-21' of git://anongit.freedesktop.org/git/drm-misc: (37 commits) drm/edid: detect SCDC support in HF-VSDB drm/edid: detect SCDC support in HF-VSDB drm/edid: check for HF-VSDB block drm: Add SCDC helpers drm: bridge: dw-hdmi: add HDMI vendor specific infoframe config drm/bridge: dw_hdmi: support i2c extended read mode drm/msm: add stubs for msm_{perf,rd}_debugfs_cleanup drm: bochs: Don't remove uninitialized fbdev framebuffer drm: vc4: remove redundant check of plane being non-null drm/vc4: use platform_register_drivers dma-fence: add dma_fence_match_context helper drm/vc4: Add HDMI audio support dt-bindings: Document the dmas and dma-names properties for VC4 HDMI drm/atmel-hlcdc: Fix suspend/resume implementation drm: Skip the waitqueue setup for vblank queries drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off) drm/doc: atomic overview, with graph drm/doc: diagram for mode objects and properties drm/doc: Consistent kerneldoc include order drm/doc: Add KMS overview graphs ...
-
git://anongit.freedesktop.org/git/drm-intelDave Airlie authored
More in i915 for 4.12: - designware i2c fixes from Hans de Goede, in a topic branch shared with other subsystems (maybe, they didn't confirm, but requested the pull) - drop drm_panel usage from the intel dsi vbt panel (Jani) - vblank evasion improvements and tracing (Maarten and Ville) - clarify spinlock irq semantics again a bit (Tvrtko) - new ->pwrite backend hook (right now just for shmem pageche writes), from Chris - more planar/ccs work from Ville - hotplug safe connector iterators everywhere - userptr fixes (Chris) - selftests for cache coloring eviction (Matthew Auld) - extend debugfs drop_caches interface for shrinker testing (Chris) - baytrail "the rps kills the machine" fix (Chris) - use new atomic state iterators, a lot (Maarten) - refactor guc/huc code some (Arkadiusz Hiler) - tighten breadcrumbs rbtree a bit (Chris) - improve wrap-around and time handling in rps residency counters (Mika) - split reset-in-progress in two flags, backoff and handoff (Chris) - other misc reset improvements from a few people - bunch of vgpu interaction fixes with recent code changes - misc stuff all over, as usual * tag 'drm-intel-next-2017-03-20' of git://anongit.freedesktop.org/git/drm-intel: (144 commits) drm/i915: Update DRIVER_DATE to 20170320 drm/i915: Initialise i915_gem_object_create_from_data() directly drm/i915: Correct error handling for i915_gem_object_create_from_data() drm/i915: i915_gem_object_create_from_data() doesn't require struct_mutex drm/i915: Retire an active batch pool object rather than allocate new drm/i915: Add i810/i815 pci-ids for completeness drm/i915: Skip execlists_dequeue() early if the list is empty drm/i915: Stop using obj->obj_exec_link outside of execbuf drm/i915: Squelch WARN for VLV_COUNTER_CONTROL drm/i915/glk: Enable pooled EUs for Geminilake drm/i915: Remove superfluous i915_add_request_no_flush() helper drm/i915/vgpu: Neuter forcewakes for VGPU more thoroughly drm/i915: Fix vGPU balloon for ggtt guard page drm/i915: Avoid use-after-free of ctx in request tracepoints drm/i915: Assert that the context pin_counts do not overflow drm/i915: Wait for reset to complete before returning from debugfs/i915_wedged drm/i915: Restore engine->submit_request before unwedging drm/i915: Move engine->submit_request selection to a vfunc drm/i915: Split I915_RESET_IN_PROGRESS into two flags drm/i915: make context status notifier head be per engine ...
-
- 21 Mar, 2017 6 commits
-
-
Shashank Sharma authored
This patch does following: - Adds a new structure (drm_hdmi_info) in drm_display_info. This structure will be used to save and indicate if sink supports advanced HDMI 2.0 features - Adds another structure drm_scdc within drm_hdmi_info, to reflect scdc support and capabilities in connected HDMI 2.0 sink. - Checks the HF-VSDB block for presence of SCDC, and marks it in scdc structure - If SCDC is present, checks if sink is capable of generating SCDC read request, and marks it in scdc structure. V2: Addressed review comments Thierry: - Fix typos in commit message and make abbreviation consistent across the commit message. - Change structure object name from hdmi_info -> hdmi - Fix typos and abbreviations in description of structure drm_hdmi_info end the description with a full stop. - Create a structure drm_scdc, and keep all information related to SCDC register set (supported, read request supported) etc in it. Ville: - Change rr -> read_request - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all of HF-VSDB parsing can be kept in same function, in incremental patches. V3: Rebase. V4: Rebase. V5: Rebase. V6: Addressed review comments from Ville - Add clock rate calculations for 1/10 and 1/40 ratios - Remove leftovers from old patchset V7: Added R-B from Jose. V8: Rebase. V9: Rebase. V10: Rebase. Signed-off-by:Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com
-
Shashank Sharma authored
This patch does following: - Adds a new structure (drm_hdmi_info) in drm_display_info. This structure will be used to save and indicate if sink supports advanced HDMI 2.0 features - Adds another structure drm_scdc within drm_hdmi_info, to reflect scdc support and capabilities in connected HDMI 2.0 sink. - Checks the HF-VSDB block for presence of SCDC, and marks it in scdc structure - If SCDC is present, checks if sink is capable of generating SCDC read request, and marks it in scdc structure. V2: Addressed review comments Thierry: - Fix typos in commit message and make abbreviation consistent across the commit message. - Change structure object name from hdmi_info -> hdmi - Fix typos and abbreviations in description of structure drm_hdmi_info end the description with a full stop. - Create a structure drm_scdc, and keep all information related to SCDC register set (supported, read request supported) etc in it. Ville: - Change rr -> read_request - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all of HF-VSDB parsing can be kept in same function, in incremental patches. V3: Rebase. V4: Rebase. V5: Rebase. V6: Rebase. V7: Added R-B from Jose. V8: Rebase. V9: Rebase. V10: Rebase. Signed-off-by:
-
Thierry Reding authored
This patch implements a small function that finds if a given CEA db is hdmi-forum vendor specific data block or not. V2: Rebase. V3: Added R-B from Jose. V4: Rebase V5: Rebase V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase Signed-off-by:
-
Thierry Reding authored
SCDC is a mechanism defined in the HDMI 2.0 specification that allows the source and sink devices to communicate. This commit introduces helpers to access the SCDC and provides the symbolic names for the various registers defined in the specification. V2: Rebase. V3: Added R-B from Jose. V4: Rebase V5: Addressed review comments from Ville - Handle the I2c return values in a better way (dp_dual_mode) - Make the macros for SCDC Major/Minor more readable, by adding a 'GET' in the macro names V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase Signed-off-by:
-
Nickey Yang authored
Vendor specific infoframe is mandatory for 4K2K resolution. Without this, the HDMI protocol compliance fails. Signed-off-by:
Nickey Yang <nickey.yang@rock-chips.com> Reviewed-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1490081777-2232-1-git-send-email-nickey.yang@rock-chips.com
-
Nickey Yang authored
"I2C Master Interface Extended Read Mode" implements a segment pointer-based read operation using the Special Register configuration. This patch fix https://patchwork.kernel.org/patch/7098101/ mentioned "The current implementation does not support "I2C Master Interface Extended Read Mode" to read data addressed by non-zero segment pointer, this means that if EDID has more than 1 extension blocks, EDID reading operation won't succeed" With this patch, dw-hdmi can read EDID data with 1/2/4 blocks. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by:
-
- 20 Mar, 2017 9 commits
-
-
Arnd Bergmann authored
We now call those two functions even when they are not defined or declared anywhere because DEBUG_FS is disabled: drivers/gpu/drm/msm/msm_drv.c: In function 'msm_drm_uninit': drivers/gpu/drm/msm/msm_drv.c:244:2: error: implicit declaration of function 'msm_perf_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration] drivers/gpu/drm/msm/msm_drv.c:245:2: error: implicit declaration of function 'msm_rd_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration] This adds empty stub implementations for that case. Fixes: 85eac470 ("drm/msm: Remove msm_debugfs_cleanup()") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170320093936.1255573-1-arnd@arndb.de
-
Gabriel Krisman Bertazi authored
In the same spirit of the fix for QXL in commit 86107838 ("drm: qxl: Don't alloc fbdev if emulation is not supported"), prevent the Oops in the unbind path of Bochs if fbdev emulation is disabled. [ 112.176009] Oops: 0002 [#1] SMP [ 112.176009] Modules linked in: bochs_drm [ 112.176009] CPU: 0 PID: 3002 Comm: bash Not tainted 4.11.0-rc1+ #111 [ 112.176009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014 [ 112.176009] task: ffff8800743bbac0 task.stack: ffffc90000b5c000 [ 112.176009] RIP: 0010:mutex_lock+0x18/0x30 [ 112.176009] RSP: 0018:ffffc90000b5fc78 EFLAGS: 00010246 [ 112.176009] RAX: 0000000000000000 RBX: 0000000000000260 RCX: 0000000000000000 [ 112.176009] RDX: ffff8800743bbac0 RSI: ffff8800787176e0 RDI: 0000000000000260 [ 112.176009] RBP: ffffc90000b5fc80 R08: ffffffff00000000 R09: 00000000ffffffff [ 112.176009] R10: ffff88007b463650 R11: 0000000000000000 R12: 0000000000000260 [ 112.176009] R13: ffff8800787176e0 R14: ffffffffa0003068 R15: 0000000000000060 [ 112.176009] FS: 00007f20564c7b40(0000) GS:ffff88007ce00000(0000) knlGS:0000000000000000 [ 112.176009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 112.176009] CR2: 0000000000000260 CR3: 000000006b89c000 CR4: 00000000000006f0 [ 112.176009] Call Trace: [ 112.176009] drm_mode_object_unregister+0x1e/0x50 [ 112.176009] drm_framebuffer_unregister_private+0x15/0x20 [ 112.176009] bochs_fbdev_fini+0x57/0x70 [bochs_drm] [ 112.176009] bochs_unload+0x16/0x50 [bochs_drm] [ 112.176009] drm_dev_unregister+0x37/0xd0 [ 112.176009] drm_put_dev+0x31/0x60 [ 112.176009] bochs_pci_remove+0x10/0x20 [bochs_drm] [ 112.176009] pci_device_remove+0x34/0xb0 [ 112.176009] device_release_driver_internal+0x150/0x200 [ 112.176009] device_release_driver+0xd/0x10 [ 112.176009] unbind_store+0x108/0x150 [ 112.176009] drv_attr_store+0x20/0x30 [ 112.176009] sysfs_kf_write+0x32/0x40 [ 112.176009] kernfs_fop_write+0x10b/0x190 [ 112.176009] __vfs_write+0x23/0x120 [ 112.176009] ? security_file_permission+0x36/0xb0 [ 112.176009] ? rw_verify_area+0x49/0xb0 [ 112.176009] vfs_write+0xb0/0x190 [ 112.176009] SyS_write+0x41/0xa0 [ 112.176009] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 112.176009] RIP: 0033:0x7f2055bd5620 [ 112.176009] RSP: 002b:00007ffed2f487d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 112.176009] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2055bd5620 [ 112.176009] RDX: 000000000000000d RSI: 0000000000ee0008 RDI: 0000000000000001 [ 112.176009] RBP: 0000000000000001 R08: 00007f2055e94760 R09: 00007f20564c7b40 [ 112.176009] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000000 [ 112.176009] R13: 00007ffed2f48d70 R14: 0000000000000000 R15: 0000000000000000 [ 112.176009] Code: 00 00 00 55 be 02 00 00 00 48 89 e5 e8 62 fb ff ff 5d c3 55 48 89 e5 53 48 89 fb e8 53 e9 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <f0> 48 0f b1 13 48 85 c0 74 08 48 89 df e8c6 ff ff ff 5b 5d c3 [ 112.176009] RIP: mutex_lock+0x18/0x30 RSP: ffffc90000b5fc78 [ 112.176009] CR2: 0000000000000260 [ 112.205622] ---[ end trace 76189cd7a9bdd155 ]--- Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170317181409.4183-1-krisman@collabora.co.ukSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Daniel Vetter authored
Signed-off-by: -
git://git.pengutronix.de/git/pza/linuxDave Airlie authored
imx-drm PRE/PRG support, deferred plane disabling, separate alpha support - Initial support for the Prefetch Resolve Engine/Gasket on i.MX6QP, improving linear scanout buffer memory bandwidth utilization. This will in the future grow reordering support and allow direct scanout of Vivante tiled renderbuffers from the GPU. - Deferred plane disabling gets rid of some busy waiting in the atomic plane disable and crtc disable paths that lead to wait_for_vblank timeouts. - Add support for RGBA formats with a separate alpha plane, that can reduce memory bandwidth utilization for mostly transparent overlay planes by skipping color reads for completely transparent regions. - Allow moving an active overlay plane without enforcing a modeset. - Add 8-bit and 16-bit bayer formats to ipu_cpmem_set_image. - Set the base address in ipu_cpmem_set_image even for invalid formats to increase robustness against errors. - Use drm_plane_helper_check_state in plane atomic_check. - Some cleanup. * tag 'imx-drm-next-2017-03-17' of git://git.pengutronix.de/git/pza/linux: (22 commits) drm/imx: Remove unneeded definition for structure imx_drm_component drm/imx: use PRG/PRE when possible drm/imx: enable/disable PRG on CRTC enable/disable gpu: ipu-v3: only set non-zero AXI ID for IC when PRG is absent gpu: ipu-v3: hook up PRG unit gpu: ipu-v3: document valid IPUv3 compatibles and extend for i.MX6 QuadPlus gpu: ipu-v3: add driver for Prefetch Resolve Gasket gpu: ipu-v3: add DT binding for the Prefetch Resolve Gasket gpu: ipu-v3: add driver for Prefetch Resolve Engine gpu: ipu-v3: add DT binding for the Prefetch Resolve Engine drm/imx: ipuv3-plane: add support for separate alpha planes drm/imx: extend drm_plane_state_to_eba for separate channel support gpu: ipu-v3: add support for separate alpha channels drm: add RGB formats with separate alpha plane drm/imx: add deferred plane disabling drm/imx: don't wait for vblank and stop calling cleanup_planes in commit_tail gpu: ipu-v3: add unsynchronised DP channel disabling gpu: ipu-v3: remove IRQ dance on DC channel disable gpu: ipu-cpmem: add bayer formats to ipu_cpmem_set_image gpu: ipu-cpmem: set image base address even for incorrect formats ...
-
Linus Torvalds authored
-
Linus Torvalds authored
This BUG_ON() triggered for me once at shutdown, and I don't see a reason for the check. The code correctly checks whether the swap slot cache is usable or not, so an uninitialized swap slot cache is not actually problematic afaik. I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since I'm not sure why that seemingly pointless check was there. I suspect the real fix is to just remove it entirely, but for now we'll warn about it but not bring the machine down. Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull more powerpc fixes from Michael Ellerman: "A couple of minor powerpc fixes for 4.11: - wire up statx() syscall - don't print a warning on memory hotplug when HPT resizing isn't available Thanks to: David Gibson, Chandan Rajendra" * tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Don't give a warning when HPT resizing isn't available powerpc: Wire up statx() syscall -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: - Mikulas Patocka added support for R_PARISC_SECREL32 relocations in modules with CONFIG_MODVERSIONS. - Dave Anglin optimized the cache flushing for vmap ranges. - Arvind Yadav provided a fix for a potential NULL pointer dereference in the parisc perf code (and some code cleanups). - I wired up the new statx system call, fixed some compiler warnings with the access_ok() macro and fixed shutdown code to really halt a system at shutdown instead of crashing & rebooting. * 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix system shutdown halt parisc: perf: Fix potential NULL pointer dereference parisc: Avoid compiler warnings with access_ok() parisc: Wire up statx system call parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range parisc: support R_PARISC_SECREL32 relocation in modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "The bulk of the changes are in qla2xxx target driver code to address various issues found during Cavium/QLogic's internal testing (stable CC's included), along with a few other stability and smaller miscellaneous improvements. There are also a couple of different patch sets from Mike Christie, which have been a result of his work to use target-core ALUA logic together with tcm-user backend driver. Finally, a patch to address some long standing issues with pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices, which will make folks using physical (or virtual) magnetic tape happy" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits) qla2xxx: Update driver version to 9.00.00.00-k qla2xxx: Fix delayed response to command for loop mode/direct connect. qla2xxx: Change scsi host lookup method. qla2xxx: Add DebugFS node to display Port Database qla2xxx: Use IOCB interface to submit non-critical MBX. qla2xxx: Add async new target notification qla2xxx: Export DIF stats via debugfs qla2xxx: Improve T10-DIF/PI handling in driver. qla2xxx: Allow relogin to proceed if remote login did not finish qla2xxx: Fix sess_lock & hardware_lock lock order problem. qla2xxx: Fix inadequate lock protection for ABTS. qla2xxx: Fix request queue corruption. qla2xxx: Fix memory leak for abts processing qla2xxx: Allow vref count to timeout on vport delete. tcmu: Convert cmd_time_out into backend device attribute tcmu: make cmd timeout configurable tcmu: add helper to check if dev was configured target: fix race during implicit transition work flushes target: allow userspace to set state to transitioning target: fix ALUA transition timeout handling ...
-
- 19 Mar, 2017 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull device-dax fixes from Dan Williams: "The device-dax driver was not being careful to handle falling back to smaller fault-granularity sizes. The driver already fails fault attempts that are smaller than the device's alignment, but it also needs to handle the cases where a larger page mapping could be established. For simplicity of the immediate fix the implementation just signals VM_FAULT_FALLBACK until fault-size == device-alignment. One fix is for -stable to address pmd-to-pte fallback from the original implementation, another fix is for the new (introduced in 4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the ride. These have received a build success notification from the kbuild robot" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix debug output typo device-dax: fix pud fault fallback handling device-dax: fix pmd/pte fault fallback handling
-
Himanshu Madhani authored
Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> signed-off-by:
Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
Current driver wait for FW to be in the ready state before processing in-coming commands. For Arbitrated Loop or Point-to- Point (not switch), FW Ready state can take a while. FW will transition to ready state after all Nports have been logged in. In the mean time, certain initiators have completed the login and starts IO. Driver needs to start processing all queues if FW is already started. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
Quinn Tran authored
For target mode, when new scsi command arrive, driver first performs a look up of the SCSI Host. The current look up method is based on the ALPA portion of the NPort ID. For Cisco switch, the ALPA can not be used as the index. Instead, the new search method is based on the full value of the Nport_ID via btree lib. Signed-off-by:
-
Himanshu Madhani authored
Signed-off-by:
-
Quinn Tran authored
The Mailbox interface is currently over subscribed. We like to reserve the Mailbox interface for the chip managment and link initialization. Any non essential Mailbox command will be routed through the IOCB interface. The IOCB interface is able to absorb more commands. Following commands are being routed through IOCB interface - Get ID List (007Ch) - Get Port DB (0064h) - Get Link Priv Stats (006Dh) Signed-off-by:
-
Quinn Tran authored
Signed-off-by:
-
Anil Gurumurthy authored
Signed-off-by:
Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by:
-
Quinn Tran authored
Add routines to support T10 DIF tag. Signed-off-by:
-
Quinn Tran authored
If the remote port have started the login process, then the PLOGI and PRLI should be back to back. Driver will allow the remote port to complete the process. For the case where the remote port decide to back off from sending PRLI, this local port sets an expiration timer for the PRLI. Once the expiration time passes, the relogin retry logic is allowed to go through and perform login with the remote port. Signed-off-by:
Quinn Tran <quinn.tran@qlogic.com> Signed-off-by:
-
Quinn Tran authored
The main lock that needs to be held for CMD or TMR submission to upper layer is the sess_lock. The sess_lock is used to serialize cmd submission and session deletion. The addition of hardware_lock being held is not necessary. This patch removes hardware_lock dependency from CMD/TMR submission. Use hardware_lock only for error response in this case. Path1 CPU0 CPU1 ---- ---- lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); Path2/deadlock *** DEADLOCK *** Call Trace: dump_stack+0x85/0xc2 print_circular_bug+0x1e3/0x250 __lock_acquire+0x1425/0x1620 lock_acquire+0xbf/0x210 _raw_spin_lock_irqsave+0x53/0x70 qlt_sess_work_fn+0x21d/0x480 [qla2xxx] process_one_work+0x1f4/0x6e0 Cc: <stable@vger.kernel.org> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reported-by:Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by:
-
Quinn Tran authored
Normally, ABTS is sent to Target Core as Task MGMT command. In the case of error, qla2xxx needs to send response, hardware_lock is required to prevent request queue corruption. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Quinn Tran authored
When FW notify driver or driver detects low FW resource, driver tries to send out Busy SCSI Status to tell Initiator side to back off. During the send process, the lock was not held. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Quinn Tran authored
Cc: <stable@vger.kernel.org> Signed-off-by:
-
Joe Carnuccio authored
Cc: <stable@vger.kernel.org> Signed-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
-
- 18 Mar, 2017 7 commits
-
-
Nicholas Bellinger authored
Instead of putting cmd_time_out under ../target/core/user_0/foo/control, which has historically been used by parameters needed for initial backend device configuration, go ahead and move cmd_time_out into a backend device attribute. In order to do this, tcmu_module_init() has been updated to create a local struct configfs_attribute **tcmu_attrs, that is based upon the existing passthrough_attrib_attrs along with the new cmd_time_out attribute. Once **tcm_attrs has been setup, go ahead and point it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core. Also following MNC's previous change, ->cmd_time_out is stored in milliseconds but exposed via configfs in seconds. Also, note this patch restricts the modification of ->cmd_time_out to before + after the TCMU device has been configured, but not while it has active fabric exports. Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: -
Mike Christie authored
A single daemon could implement multiple types of devices using multuple types of real devices that may not support restarting from crashes and/or handling tcmu timeouts. This makes the cmd timeout configurable, so handlers that do not support it can turn if off for now. Signed-off-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
-
Mike Christie authored
This adds a helper to check if the dev was configured. It will be used in the next patch to prevent updates to some config settings after the device has been setup. Signed-off-by:
-
git://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC fixes from Stafford Horne: "OpenRISC fixes for build issues that were exposed by kbuild robots after 4.11 merge. All from allmodconfig builds. This includes: - bug in the handling of 8-byte get_user() calls - module build failure due to multile missing symbol exports" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: Export symbols needed by modules openrisc: fix issue handling 8 byte get_user calls openrisc: xchg: fix `computed is not used` warning
-
Mike Christie authored
This fixes the following races: 1. core_alua_do_transition_tg_pt could have read tg_pt_gp_alua_access_state and gone into this if chunk: if (!explicit && atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) == ALUA_ACCESS_STATE_TRANSITION) { and then core_alua_do_transition_tg_pt_work could update the state. core_alua_do_transition_tg_pt would then only set tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would not get updated with the second calls state. 2. core_alua_do_transition_tg_pt could be setting tg_pt_gp_transition_complete while the tg_pt_gp_transition_work is already completing. core_alua_do_transition_tg_pt then waits on the completion that will never be called. To handle these issues, we just call flush_work which will return when core_alua_do_transition_tg_pt_work has completed so there is no need to do the complete/wait. And, if core_alua_do_transition_tg_pt_work was running, instead of trying to sneak in the state change, we just schedule up another core_alua_do_transition_tg_pt_work call. Note that this does not handle a possible race where there are multiple threads call core_alua_do_transition_tg_pt at the same time. I think we need a mutex in target_tg_pt_gp_alua_access_state_store. Signed-off-by: -
Mike Christie authored
Userspace target_core_user handlers like tcmu-runner may want to set the ALUA state to transitioning while it does implicit transitions. This patch allows that state when set from configfs. Signed-off-by:
-
Mike Christie authored
The implicit transition time tells initiators the min time to wait before timing out a transition. We currently schedule the transition to occur in tg_pt_gp_implicit_trans_secs seconds so there is no room for delays. If core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata needs to write out info to a remote file, then the initiator can easily time out the operation. Signed-off-by:
-
