Update catc, pegasus, rtl8150, and gadget/ether to use netdev_priv()

Fix of the debug/trace driver and removal of irq locks.

 - Only spinlocks[bh] are used now.
 - Removed obsolete direct debug /proc interface.
 - Update of internal trace features and its API.
 - Use common definition of MAX_DESCRIPTORS.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Optimizes transmit windows for improved performance and to prevent
TX underruns. Fixes driver registration error handling. Fixes ZMII
and RGMII thinkos. Fixes for MDIO handling issues from Ralph
Siemsen. Please apply.
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

From: Laurent <laurent@gobio2.net>

Some time ago, I sent on this list a mail about my strange problem with my
SiS900 network card (Subject was Sluggish performances with FreeBSD)

To sum up, when my card is in 100Mb mode, I have poor throughput but in
10Mb, all seems normal.

After some tests, it seems these results was due to a misdetection of the
PHY device.  mii-tool reports :

 product info: vendor 08:00:17, model 3 rev 0

and after some search on the web, I found it's a NS DP83847 which is very
similar.
Signed-off-by: Andrew Morton <akpm@osdl.org>

into austin.ibm.com:/shaggy/bk/jfs-2.5

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>

into hostme.bitkeeper.com:/repos/j/jfs/linux-2.5

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It seems that CONFIG_IDE_TASKFILE_IO code in pdc4030.c was never tested
(i.e. writes don't work et all because of bogus rq->cmd check).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Let's kill the obsolete CONFIG_BLK_DEV_HD98 entry.
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Arjan van de Ven <arjanv@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Alan Cox <alan@redhat.com>

Some interfaces (notably PCMCIA ones) don't decode the master/slave select so
you get two copies of a device appearing and bad things happening if a user
accidentally uses both. 

This checks for the model/serial matching but also knows about non ATA drives
ide=noprobe and a Maxtor problem that was found in Andrew's testing of an
earlier patch. Although M00000.. drives should be RMA'd to Maxtor (and with
info on where they were obtained...) we don't want to break anyone who has
them.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Alan Cox <alan@redhat.com>

If you get invalid geometry (eg a failed drive) the box hangs on boot because
we try and unregister the registered driver and end up in a locking mess.

We change the behaviour to simply leave the device unattached which avoids
the mess.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>