Intel CoffeeLake SoC uses CPU ID of KabyLake but has Cannonlake PCH, so in
this case PMC register details from Cannonlake PCH must be used.

In order to identify whether the given platform is Coffeelake, scan for the
Sunrisepoint PMC PCI Id.

	 KBL CPUID	SPT PCIID
------------------------------------
KBL	|	Y	|	Y   |
------------------------------------
CFL	|	Y	|	N   |
------------------------------------
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This adds support for Cannonlake PCH which is used by Cannonlake and
Coffeelake SoCs.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add CPUID of Cannonlake (CNL) processors to Intel family list.

Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Read SLP_S0 address from ACPI LPIT table when present and use PMC
specific SLP_S0 offset to get the base address of PMC MMIO.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Export lpit_read_residency_count_address(), so that it can be used from
drivers built as module. With the recent changes, the builtin_pci
functionality of the intel_pmc_core driver is removed and now it can be
built as a module to read this exported interface to calculate the PMC base
address.

Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Replace License short header by SPDX identifier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Some headers are not needed since the driver can be built as module.
Remove them.

While here, sort headers alphabetically.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

On some laptop like the Dell Inspiron 7000 series tablet mode switch
implemented in Intel ACPI, the events to enter and exit the tablet mode
are 0xCC and 0xCD

This initializes the tablet/laptop mode at the correct value
if the system booted in tablet mode (or the intel-vbtn module
loaded with the device in tablet mode)

Cc: platform-driver-x86@vger.kernel.org
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: "Pali Rohár" <pali.rohar@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Stefan Brüns<stefan.bruens@rwth-aachen.de>
Signed-off-by: Marco Martin <notmart@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
[andy: fixed style of comments, indentation, and massaged commit message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There is no longer a need for the buffer to be defined in
first 4GB physical address space.

Furthermore there may be race conditions with multiple different functions
working on a module wide buffer causing incorrect results.

Fixes: 549b4930Suggested-by: Pali Rohar <pali.rohar@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Recently sent patch 'platform/x86: intel_pmc_core: Remove unused EXPORTED
API' missed to remove the header file 'arch/x86/include/asm/pmc_core.h'
which was solely used to declare the EXPORTED API
'intel_pmc_slp_s0_counter_read'. This patch provides the errata fix for the
same.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add hotplug platform driver un-registration in case regmap cache
synchronization failed. In such case hotplug platform driver
registration should be rolled back.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Missing prefix 'pn' in MODULE_ALIAS lines causes the module to
not load automatically. The driver should use MODULE_DEVICE_TABLE
together with existing mlxplat_dmi_table instead.

Fixes: 6613d18e ("platform/x86: mlx-platform: Move module from arch/x86")
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Bjørn Mork <bjorn@mork.no>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Verify before creation of hotplug device if the associated adapter number
is negative. It could be in case hotplug event is not associated with
hotplug device.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Add definitions for hotplug device masks and events offsets, in order to
specify explicitly all hardware registers allowed for IO operations for
all the drivers sharing register map with mlx-platform.

Extend register map configuration with the sets of writable, readable and
volatile registers to allow verification prior to the access. It prevents
unexpected access to hardware registers by the drivers, sharing register
map with mlx-platform.

Extend register map configuration with cache type field in order to have
ability to cache hardware register value, where possible. Use simple flat
array type for register lookups, which is most suitable in case when the
number of the registers is not too large.

Add at the end of probing routine calls to regcache_mark_dirty and
regcache_sync in order to sync register cache with hardware values. The
first routine indicate that hardware registers value required sync, the
second performs sync.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Add missing description of pdev_hotplug in struct mlxplat_priv.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

It makes mlx-platform available for 32 bit architecture.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Add ARM in addition to X86 as supported architectures in the Mellanox
Hotplug Platform driver Kconfig entry.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: rewrite commit message]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Restructure mlxreg header for unification of hotplug item definitions.

Unify hotplug items to allow any kind of item (power controller, fan
eeprom, psu eeprom, asic health) in common way.

Use a hardware independent regmap interface, enabling the support of
hotplug events over programmable devices attached to different bus
types, such as I2C, LPC, or SPI. Add a device node to the
mlxreg_core_data structure.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[dvhart: spelling corrections, refactor device node introduction]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Move the mlxreg_hotplug_device_create and _destroy functions up with the
related attribute functions. No functional changes.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[dvhart: refactored commit into smaller functional changes]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Use Linux convention of nr instead of bus for i2c adapter number.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[dvhart: refactored commit into smaller functional changes]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

The driver does not make use of anything defined in wait.h.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[dvhart: refactor into smaller functional changes, leave spinlock.h]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

In preparation for making the hotplug driver build for different
architectures, move mlxcpld-hotplug.c to platform/mellanox and the
header to include/linux/platform_data as mlxreg.h to reflect the new
interface changes to come.

Replace references to CPLD with REG throughout the files, consistent
with the new name.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[dvhart: update copyright, rewrite commit message]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Commit 4eebd5a4 ("apple-gmux: lock iGP IO to protect from vgaarb
changes") amended this driver's ->probe hook to lock decoding of normal
(non-legacy) I/O space accesses to the integrated GPU on dual-GPU
MacBook Pros.  The lock stays in place until the driver is unbound.

The change was made to work around an issue with the out-of-tree nvidia
graphics driver (available at http://www.nvidia.com/object/unix.html).
It contains the following sequence in nvidia/nv.c:

	#if defined(CONFIG_VGA_ARB) && !defined(NVCPU_PPC64LE)
	#if defined(VGA_DEFAULT_DEVICE)
	    vga_tryget(VGA_DEFAULT_DEVICE, VGA_RSRC_LEGACY_MASK);
	#endif
	    vga_set_legacy_decoding(dev, VGA_RSRC_NONE);
	#endif

This code was reported to cause deadlocks with VFIO already in 2013:
https://devtalk.nvidia.com/default/topic/545560

I've reported the issue to Nvidia developers once more in 2017:
https://www.spinics.net/lists/dri-devel/msg138754.html

On the MacBookPro10,1, this code apparently breaks backlight control
(which is handled by apple-gmux via an I/O region starting at 0x700),
as reported by Petri Hodju:
https://bugzilla.kernel.org/show_bug.cgi?id=86121

I tried to replicate Petri's observations on my MacBook9,1, which uses
the same Intel Ivy Bridge + Nvidia GeForce GT 650M architecture, to no
avail.  On my machine apple-gmux' I/O region remains accessible even
with the nvidia driver loaded and commit 4eebd5a4 reverted.
Petri reported that apple-gmux becomes accessible again after a
suspend/resume cycle because the BIOS changed the VGA routing on the
root port to the Nvidia GPU.  Perhaps this is a BIOS issue after all
that can be fixed with an update?

In any case, the change made by commit 4eebd5a4 has turned out to
cause two new issues:

* Wilfried Klaebe reports a deadlock when launching Xorg because it
  opens /dev/vga_arbiter and calls vga_get(), but apple-gmux is holding
  a lock on I/O space indefinitely.  It looks like apple-gmux' current
  behavior is an abuse of the vgaarb API as locks are not meant to be
  held for longer periods:
  https://bugzilla.kernel.org/show_bug.cgi?id=88861#c11
  https://bugzilla.kernel.org/attachment.cgi?id=217541

* On dual GPU MacBook Pros introduced since 2013, the integrated GPU is
  powergated on boot und thus becomes invisible to Linux unless a custom
  EFI protocol is used to leave it powered on.  (A patch exists but is
  not in mainline yet due to several negative side effects.)  On these
  machines, locking I/O to the integrated GPU (as done by 4eebd5a4)
  fails and backlight control is therefore broken:
  https://bugzilla.kernel.org/show_bug.cgi?id=105051

So let's revert commit 4eebd5a4 please.  Users experiencing the
issue with the proprietary nvidia driver can comment out the above-
quoted problematic code as a workaround (or try updating the BIOS).

Cc: Petri Hodju <petrihodju@yahoo.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bruno Prémont <bonbons@linux-vserver.org>
Cc: Andy Ritger <aritger@nvidia.com>
Cc: Ronald Tschalär <ronald@innovation.ch>
Tested-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Stop the work on suspend, otherwise it may run between our suspend method
running and the system suspending, possibly restarting the fan which
we've just stopped.

Note we already requeue the work on resume, so that we get a fresh speed
at resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Newer versions of the GPD pocket BIOS set the fan-speed to 2 when a
charger gets plugged in while the device is off. Mirror this in our
fan driver and use a minimum speed of 2 while charging,

Cc: James <kernel@madingley.org>
Suggested-by: James <kernel@madingley.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

When we fail to get the temperature, assume the worst and set the speed
to max.

While at it introduce a define for MAX_SPEED.

Cc: James <kernel@madingley.org>
Suggested-by: James <kernel@madingley.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Use ICPU macro to refactor code related to x86_cpu_id for better
readability.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The Only use of PCI device enumeration here is to get the PMC base address
which is a fixed value i.e. 0xFE000000. On some platforms this can be read
through a non standard PCI BAR. But after Kabylake, PMC is not exposed as a
PCI device anymore. There are other non standard methods like ACPI LPIT
which can also be used for obtaining this value.

For simplicity, this value can be hardcoded as it won't change.

Since we don't have a PMC PCI device on any platform after Kabylake, this
creates a foundation for future SoC support.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

When on a platform if we can't show MPHY and PLL status, don't even bother
to create a debugfs entry as it will fail anyway. In fact unless OEM builds
a special BIOS for test, it will fail on every production system.

This will help to add future platform support where we can't support these
entries.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The class/select were mistakenly put into octal notation but
intended to be in decimal notation.
Suggested-by: Pali Rohar <pali.rohar@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

SMBIOS 3.0.0 Specification introduced new Chassis Types field values for
2-in-1 devices like tablets, convertibles and detachables. Dell's
Inspiron 2-in-1 and XPS 2-in-1 fall into this category and they have to
be added to the DMI whitelist, so rfkill and backlight can be controlled
for them as for other laptops.
Signed-off-by: Alexander Abrosimov <alexander.n.abrosimov@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Add touchscreen platform data for the Teclast X3 Plus tablet.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alberto Ponces <ponces26@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

This patch prevents the thinkpad_acpi driver from warning about 2 event
codes returned for keyboard palm-detection. No behavioral changes,
other than suppressing the warning in the kernel log. The events are
still forwarded via acpi-netlink channels.

We could, optionally, decide to forward the event through a
input-switch on the tpacpi input device. However, so far no suitable
input-code exists, and no similar drivers report such events. Hence,
leave it an acpi event for now.

Note that the event-codes are named based on empirical studies. On the
ThinkPad X1 5th Gen the sensor can be found underneath the arrow key.

Cc: Matthew Thode <mthode@mthode.org>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Some versions of the Trekstor Surftab 7.0 ship with a newer BIOS which uses
different DMI strings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

On some Dell XPS models WMI events of type 0x0000 reporting a keycode of
0xe00c get reported when the brightness of the LCD panel changes.

This leads to us reporting false-positive kbd_led change events to
userspace which in turn leads to the kbd backlight OSD showing when it
should not.

We already read the current keyboard backlight brightness value when
reporting events because the led_classdev_notify_brightness_hw_changed
API requires this. Compare this value to the last known value and filter
out duplicate events, fixing this.

Note the fixed issue is esp. a problem on XPS models with an ambient light
sensor and automatic brightness adjustments turned on, this causes the kbd
backlight OSD to show all the time there.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514969
Fixes: 9c656b07 ("platform/x86: dell-*: Call new led hw_changed API ...")
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This adds list of supported features by this driver to the Kconfig.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Symbolic permissions 'S_IRUGO' are not preferred. This patch changes the
debugfs files to use octal permissions '0644' or '0444' as needed by the
attribute.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Allow the driver to be a module since builtin_pci_driver funtionality is no
longer needed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Fix invalid field information and add missing fields in kernel doc comments.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

base_address field is redundant and unused in the driver so get rid of it.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>