- 08 Jul, 2014 1 commit
-
-
Johan Hedberg authored
Having a single HCI_ADVERTISING flag is problematic since it tries to track both the real advertising state and the corresponding mgmt setting. To make the logic simpler and more reliable add a new flag that only tracks the actual advertising state that has been written to the controller. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
- 07 Jul, 2014 10 commits
-
-
Johan Hedberg authored
For adapters that do not support LE and ones where LE hasn't been enabled we shouldn't be trying to initiate background scanning. This patch adds an extra check to the hci_update_background_scan() to ensure that we bail out if HCI_LE_ENABLED is not set. Since we do allow user space to feed the kernel with LE connection parameters even when LE is not enabled we now need to also call hci_update_background_scan() as soon as LE gets enabled so that scanning gets started if necessary. Signed-off-by:
-
Johan Hedberg authored
If we have both LE scanning and advertising simultaneously enabled we need a way to tell hci_connect_le() in which role to initiate a connection. This patch adds a new parameter to the function to give it the necessary information. For auto-connect and mgmt_pair_device we always use master role, whereas for L2CAP users (in practice sockets) we use slave role whenever HCI_ADVERTISING is set and master role otherwise. Signed-off-by:
-
Johan Hedberg authored
The auth_type value which gets assigned to hci_conn->auth_type is something that's only used for BR/EDR connections and is of no value for LE connections. It makes therefore little sense to pass it to the hci_connect_le() function. This patch removes the parameter from the function. Signed-off-by:
-
Johan Hedberg authored
Enabling passive scanning always when we're connectable aligns us with the BR/EDR page scanning. This is also consistent with the fact that the code dealing with passive scanning results will actively try to connect any direct advertising event when we're connectable. This patch implements the feature by adding the connectable condition to hci_update_background_scan() checks for starting scanning and by calling hci_update_background_scan() whenever the connectable state changes. Signed-off-by:
-
Johan Hedberg authored
If we have an active discovery going on we shouldn't do any changes to LE scanning when hci_update_background_scan() is called (a call which can happen for many different reasons). This patch fixes the issue by returning from the function if the discovery state is anything else except DISCOVERY_STOPPED. Signed-off-by:
-
Johan Hedberg authored
In a subsequent patch the hci_update_background_scan() function will depend on being able to know the current discovery state. For this to be possible we need to set the new state early in the function. Since we also need to check what the old state was this patch introduces an extra variable for tracking it. Signed-off-by:
-
Johan Hedberg authored
Since the only caller of this function doesn't care about the return value anymore let's just remove it. Signed-off-by:
-
Johan Hedberg authored
Now that we have the process_adv_report() function doing the IRK lookup and updating the bdaddr we don't need to do this anymore in mgmt.c in the mgmt_device_found() function. Signed-off-by:
-
Johan Hedberg authored
If we have devices set as to be connected we should connect to them even during normal discovery if we get a connectable advertising event. If we also have HCI_CONNECTABLE set we should connect ADV_DIRECT_IND events even to devices that we don't have in our pend_le_conns list. This patch implements such behavior by passing the advertising report type to check_pending_le_conn() and calls that function regardless of what type of scanning we are doing. Signed-off-by:
-
Marcel Holtmann authored
Instead of setting data->isoc manually, use BTUSB_BROKEN_ISOC to indicate that isochronous endpoints are not needed for CSR USB sniffer devices. Signed-off-by:
-
- 06 Jul, 2014 14 commits
-
-
Marcel Holtmann authored
The hdev->send driver callback is mandatory to be provided by a driver before calling hci_register_dev. So enforce it and return EINVAL in case it is not available. All existing drivers are providing this callback anyway, so this is just an extra sanity check. Signed-off-by:
-
Marcel Holtmann authored
The drivers are allowed to just return an error from hdev->send callback and in that case the driver does not own the SKB. Which means that the caller has to free the SKB. Signed-off-by:
-
Marcel Holtmann authored
The isochronous endpoints are not valid when the Intel Bluetooth controller boots up in bootloader mode. So just mark these endpoints as broken and then they will not be configured. Signed-off-by:
-
Marcel Holtmann authored
The interrupt interface for the Intel USB bootloader devices is only enabled after receiving SetInterface(0, AltSetting=0). When this USB command is not send, then no HCI events will be received. Signed-off-by:
-
Johan Hedberg authored
When we get an LE connection complete event we should restart background scanning if there are any devices needing it. So far the code was only making the decision based on whether the completed connection had any stored parameters or not. This patch ensures that we trigger background scanning always when necessary. Signed-off-by:
-
Marcel Holtmann authored
The module parameters to ignore devices based on USB VID/PID are not needed at all. So just remove them. Signed-off-by:
-
Marcel Holtmann authored
When the driver sets HCI_QUIRK_RAW_DEVICE, the controller will be set as unconfigured. However running the unconfigured init procecure is not useful since raw-only devices are not allowed to change its configuration. This change skips the init procedure and just allows user channel operation for this device. Signed-off-by:
-
Marcel Holtmann authored
Intel Bluetooth devices that boot up in bootloader mode can not be used as generic HCI devices, but their HCI transport is still valuable and so bring that up as raw-only devices. T: Bus=02 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 14 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0a5a Rev= 0.00 S: Manufacturer=Intel(R) Corporation S: Product=Intel(R) Wilkins Peak 2x2 S: SerialNumber=001122334455 WP_A0 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
-
Johan Hedberg authored
When we establish connections as a consequence of receiving an advertising report it makes no sense to wait the normal 20 second LE connection timeout. This patch modifies the hci_connect_le function to take an extra timeout value and uses a lower 2 second timeout for the auto-connection case. This timeout is intentionally chosen to be just a bit higher than the 1.28 second timeout that High Duty Cycle Advertising uses. Signed-off-by:
-
Marcel Holtmann authored
When an unconfigured controllers reaches the configured state, it is important to change the HCI_RAW flag. It indicates to userspace that the controller is fully operational. External configuration allows to bring the controller back into an unconfigured state. In that case make sure HCI_RAW flag is set again. Signed-off-by:
-
Marcel Holtmann authored
This adds support for changing the public device address. This feature is required by controllers that do not provide a public address and have HCI_QUIRK_INVALID_BDADDR set. Even if a controller has a public device address, this is useful when an embedded system wants to use its own value. As long as the driver provides the set_bdaddr callback, this allows changing the device address before powering on the controller. Signed-off-by:
-
Marcel Holtmann authored
When the external configuration triggers the switch to a configured controller, it means the setup needs to be run. Controllers that start out unconfigured have only run limited set of HCI commands. This is not enough for complete operation and thus run the setup procedure before announcing the new controller index. This introduces HCI_CONFIG flag as companion to HCI_SETUP flag. The HCI_SETUP flag is only used once for the initial setup procedure. And during that procedure hdev->setup driver callback is called. With the new HCI_CONFIG the switch from unconfigured to configured state is triggering the same setup procedure just without hdev->setup. This is required since bringing a controller back to unconfigured state from configured state is possible. Signed-off-by:
-
Johan Hedberg authored
When calling Device Remove with BDADDR_ANY we should in a similar way emit Device Removed events as we do when removing a single device. Since we have to iterate the list and call device_removed() the dedicated hci_conn_params_clear_enabled() is not really useful anymore. This patch removes the helper function and does the event emission and list item removal in a single loop. Signed-off-by:
-
Johan Hedberg authored
BR/EDR has the connection request and connection request rejection, but LE doesn't have anything similar. We still request LE connections to blocked devices to be disconnected but it's possible that ACL data slips through before that. The check in l2cap_recv_frame really only needs to be for LE and not BR/EDR because of this. Signed-off-by:
-
- 05 Jul, 2014 3 commits
-
-
Marcel Holtmann authored
During the setup phase of a controller, the Bluetooth address will be read and to have that original address available for later use, store it as setup address. Signed-off-by:
-
Marcel Holtmann authored
For an unconfigured controller it is required to read at least the local version information. If the set_bdaddr driver callback is provideded, then also the local Bluetooth address will be read. Signed-off-by:
-
Marcel Holtmann authored
The HCI event callbacks have grown over the last years and some functions handle status checking different than others. For the simple ones, check the status at the beginning and exit if an error with the HCI command occured. Signed-off-by:
-
- 04 Jul, 2014 12 commits
-
-
Marcel Holtmann authored
When one or more of the missing configuration options change, then send this even to all the other management interface clients. Signed-off-by:
-
Marcel Holtmann authored
Move the mgmt_event function higher up in the code so that no forward declaration is needed. Signed-off-by:
-
Marcel Holtmann authored
The Set External Configuration management command allows for switching between configured and unconfigured start if HCI_QURIK_EXTERNAL_CONFIG is set by the transport driver. Signed-off-by:
-
Marcel Holtmann authored
This adds support for configuring the hci_vhci virtual controllers to require a setup stage using HCI_QUIRK_EXTERNAL_CONFIG. With this option the virtual controller will start out as unconfigured. Signed-off-by:
-
Marcel Holtmann authored
For the quirks that are allow to be set during setup callback, the check needs to be modified so that they are applied even if no setup callback provided by the driver. Signed-off-by:
-
Marcel Holtmann authored
When a controller requires external configuration, then setting this quirk will allow indicating this. Signed-off-by:
-
Marcel Holtmann authored
Reading the controller configuration information is a valid management command when the controller is unconfigured. Allow this command, but return invalid index on all other commands. Signed-off-by:
-
Marcel Holtmann authored
When the Broadcom USB controller has a default address, then set the quirk so the Bluetooth core knows that controller configuration is required. Signed-off-by:
-
Marcel Holtmann authored
When the Intel USB controller has a default address, then set the quirk so the Bluetooth core knows that controller configuration is required. Signed-off-by:
-
Marcel Holtmann authored
When a Bluetooth controller does not have a valid public Bluetooth address, then allow the driver to indicate this. If the quirk is set, the Bluetooth core will switch to unconfigured state first and will allow userspace to configure the address before starting the full initialization of the controller. Signed-off-by:
-
Marcel Holtmann authored
The current existing device quirks are not documented. So instead of spreading bits and pieces somewhere in the code, add proper comments on where these quirks can be used and what behavior they change. Signed-off-by:
-
Johan Hedberg authored
It's wasteful to use list_del_init (which re-initializes the list_head) if we're just about to free the element and never use it again. Signed-off-by:
-
