The i2c init/fini functions just register the i2c adapter.
There is no need to call them during hw init/fini.  They only
need to be called once per driver init/fini.  The previous
behavior broke runtime pm because we unregistered the i2c
adapter during suspend.
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

| [Header Changes]
|       - Reworked the FW versioning to include hotfix
|         and test bits
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
When changing pixel formats for HDR (e.g. ARGB -> FP16)
there are configurations that change from 2 pipes to 1 pipe.
In these cases, it seems that disconnecting MPCC and doing
a surface update at the same time(after unlocking) causes
some registers to be updated slightly faster than others
after unlocking (e.g. if the pixel format is updated to FP16
before the new surface address is programmed, we get
corruption on the screen because the pixel formats aren't
matching). We separate disconnecting MPCC from the rest
of  the  pipe programming sequence to prevent this.

[How]
Move MPCC disconnect into separate operation than the
rest of the pipe programming.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
There's currently no method to enable multi-stream synchronization from
userspace and we don't check the VSDB bits to know whether or not
specific displays should have the feature enable.

[how]
Add a debugfs entry that controls a new DM debug option,
"force_timing_sync". This debug option will set on any newly created
stream following the change to the debug option.
Expose a new interface from DC that performs the timing sync and a helper
to the "force_timing_sync" debugfs that iterates over the current streams
and modifies the current synchornization state and grouping.

Example usage to force a resync (from an X based desktop):

echo 1 > /sys/kernel/debug/dri/0/amdgpu_dm_force_timing_sync
xset dpms force off && xset dpms force on
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Display goes blank after driver installation.
Aux tuning parameters must be used for 2.x only.
Wrong dc_golden_table offset was used.

[How]
Implement a new enc3_hw_init function without VBIOS constants usage to
be called for 3.x
Calculate dc_golden_table offset using sum of
base dce_info offset and golden table offset
Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
During SetPathMode and UpdatePlanes, the plane state can be null. We default
to linear swizzle mode when plane state is null. This resulted in bandwidth
validation failing when trying to set 8K60 mode (which previously passed validation
during rebuild timing list).

[How]
Change the default swizzle mode from linear to 4kb_s and update pitch accordingly.
Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[How]
Use dc_is_hdmi_signal to determine signal type.
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Sink OUI supported cap is not set so driver skips programming it.

[How]
Revert the change the skips OUI programming if the cap is not set
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Some of the DSC debugfs read enteries are missing comments
explaining how to use and how to comprehend the results.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why&How]
use correct logger context
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
We need to be able to specify bits per pixel for DSC on any
connector.

[How]
Overwrite computed DSC target rate in dsc_cfg, with requested value.
Overwrites for both SST and MST connectors, but in different places, but the process is identical. Overwrites only if DSC is decided to be enabled on that connector.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
For ver.4.4 and higher VBIOS contains default setting table.

{How]
Read Golden Settings Table from VBIOS, apply Aux tuning parameters.
Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
We need to be able to specify slice height for any connector's DSC

[How]
Overwrite computed parameters in dsc_cfg, with the value needed/
Overwrites for both SST and MST connectors, but in different places, but the process is identical. Overwrites only if DSC is decided to be enabled on that connector.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

updated RAS EEPROM init/threshold sequences to check for device support
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

enabled GECC error injection and query support
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

what:
the MQD's save and restore of KCQ (kernel compute queue)
cost lots of clocks during world switch which impacts a lot
to multi-VF performance

how:
introduce a paramter to control the number of KCQ to avoid
performance drop if there is no kernel compute queue needed

notes:
this paramter only affects gfx 8/9/10

v2:
refine namings

v3:
choose queues for each ring to that try best to cross pipes evenly.

v4:
fix indentation
some cleanupsin the gfx_compute_queue_acquire()

v5:
further fix on indentations
more cleanupsin gfx_compute_queue_acquire()

TODO:
in the future we will let hypervisor driver to set this paramter
automatically thus no need for user to configure it through
modprobe in virtual machine
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

During driver's probe, when it hits bad gpu tag in eeprom i2c
init calling(the tag was set when reported bad page reaches
bad page threshold in last driver's working loop), there are
some strategys to deal with the cases:

1. when the module parameter amdgpu_bad_page_threshold = 0,
that means page retirement feature is disabled, so just resetting
the eeprom is fine.
2. When amdgpu_bad_page_threshold is not 0, and moreover, user
sets one bigger valid data in order to make current boot up
succeeds, correct eeprom header tag and do not break booting.
3. For other cases, driver's probe will be broken.

v2: Just update eeprom header tag instead of resetting the whole
    table header when user sets one bigger threshold data.

v3: Use dev_info/dev_err to print PCI device information, which
    helps in mGPU case.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When amdgpu_bad_page_threshold = 0, bad page reservation stuffs
are skipped in either UMC ECC irq or page retirement calling of
sync flood isr.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Bad page information should not be exposed by sysfs when
bad page retirement is disabled, so decouple it from ras
sysfs group creating, and add one guard before creating.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add one definition for the RAS module's FS name. It's used
in both debugfs and sysfs cases.

v2: Use static variable instead of macro definition.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

RAS flags needs to be cleaned as well when user requires
one clean eeprom.

v2: RAS flags shall be restored after eeprom reset succeeds.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When GPU executes recovery and retriving bad GPU tag
from external eerpom device, the recovery will be broken
and error message is printed as well for user's awareness.

v2: Refine warning message in threshold reaching case, and
    fix spelling typo.

v3: Fix explicit calling of bad gpu.

v4: Rename function names.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Once the bad page saved to eeprom reaches the configured
threshold, ras recovery will be issued to notify user.

v2: Fix spelling typo.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Once the ras recovery is issued from eeprom write itself,
bad page reservation should be ignored, otherwise, recursive
calling of writting to eeprom would happen.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When retrieving bad gpu tag from eeprom, GPU init should
fail as the GPU needs to be retired for further check.

v2: Fix spelling typo, correct the condition to detect
    bad gpu tag and refine error message.

v3: Refine function argument name.

v4: Fix missing check of returning value of i2c
    initialization error case.

v5: Use dev_err to print PCI information in dmesg instead
    of DRM_ERROR.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This tag will be hired for bad gpu detection in eeprom's access.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Bad page threshold value should be valid in the range between
-1 and max records length of eeprom. It could determine when
saved bad pages exceed threshold value, and proceed corresponding
actions.

v2: When using the default typical value, it should be min
value between typical value and eeprom max records length.

v3: drop the case of setting bad_page_cnt_threshold to be
    0xFFFFFFFF, as it confuses user.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

bad_page_threshold could be configured to enable/disable the
associated bad page retirement feature in RAS.

When it's -1, ras will use typical bad page failure value to
handle bad page retirement.

When it's 0, disable bad page retirement, and no bad page
will be recorded and saved.

For other valid value, driver will use this manual value
as the threshold value of totoal bad pages.

v2: correct documentation of this parameter.

v3: remove confused statement in documentation.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Event bitmask is a 64-bit mask with only 1 bit set. Sending this
event bitmask in KFD SMI event message is both wasteful of memory
and potentially limiting to only 64 events. Instead send event
index in SMI event message.
Please note this change does not break the ABI for the two event
types defined so far. The new index is identical to the mask used
before.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This regressed some working configurations so revert it.  Will
fix this properly for 5.9 and backport then.

This reverts commit 38e0c89a.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Enable GFXOFF for navy_flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. For Navi12, CHIP_SIENNA_CICHLID, skip tmr load operation;
2. Check pointer before release firmware.

v2: use CHIP_SIENNA_CICHLID instead
v3: remove local "bool ret"; fix grammer issue
v4: use my name instead of "root"
v5: fix grammer issue and indent issue
Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Assigning false to block->status.hw overwrites PSP's previous
hardware status, which causes the PSP to Resume operation after
hardware init.

Remove this assignment and let the PSP execute Resume operation
when it is told to.

v2: Remove the braces.
v3: Modify the description.
Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Trying to grab dma_resv_lock while in commit_tail before we've done
all the code that leads to the eventual signalling of the vblank event
(which can be a dma_fence) is deadlock-y. Don't do that.

Here the solution is easy because just grabbing locks to read
something races anyway. We don't need to bother, READ_ONCE is
equivalent. And avoids the locking issue.

v2: Also take into account tmz_surface boolean, plus just delete the
old code.

Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-rdma@vger.kernel.org
Cc: amd-gfx@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove casting the values returned by memory allocation function.

Coccinelle emits WARNING:

./drivers/gpu/drm/amd/powerplay/hwmgr/vega20_processpptables.c:893:37-46: WARNING: casting value returned by memory allocation function to (PPTable_t *) is useless.
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Compiler leaves a 4-byte hole near the end of `dev_info`, causing
amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace
when `size` is greater than 356.

In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which
unfortunately does not initialize that 4-byte hole. Fix it by using
memset() instead.

Cc: stable@vger.kernel.org
Fixes: c193fa91 ("drm/amdgpu: information leak in amdgpu_info_ioctl()")
Fixes: d38ceaf9 ("drm/amdgpu: add core driver (v4)")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>