- 13 Dec, 2013 1 commit
-
-
Mauro Carvalho Chehab authored
Merge the media fixes merged upstream for v3.13-rc4 * upstream-fixes: (30 commits) [media] videobuf2-dma-sg: fix possible memory leak [media] vb2: regression fix: always set length field. [media] mt9p031: Include linux/of.h header [media] rtl2830: add parent for I2C adapter [media] media: marvell-ccic: use devm to release clk [media] ths7303: Declare as static a private function [media] em28xx-video: Swap release order to avoid lock nesting [media] usbtv: Add support for PAL video source [media] media_tree: Fix spelling errors [media] videobuf2: Add support for file access mode flags for DMABUF exporting [media] radio-shark2: Mark shark_resume_leds() inline to kill compiler warning [media] radio-shark: Mark shark_resume_leds() inline to kill compiler warning [media] af9035: unlock on error in af9035_i2c_master_xfer() [media] af9033: fix broken I2C [media] v4l: omap3isp: Don't check for missing get_fmt op on remote subdev [media] af9035: fix broken I2C and USB I/O [media] wm8775: fix broken audio routing [media] marvell-ccic: drop resource free in driver remove [media] tef6862/radio-tea5764: actually assign clamp result [media] cx231xx: use after free on error path in probe ...
-
- 11 Dec, 2013 37 commits
-
-
Laurent Pinchart authored
The Look-Up Table looks up values in 8-bit indexed tables separately for each color component. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The Super Resolution Unit performs super resolution processing with optional upscaling by a factor of two. Signed-off-by:
-
Laurent Pinchart authored
The Hue Saturation value Transform and Hue Saturation value Inverse transform entities convert from RGB to HSV and back. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Implement the get and set selection operations on the RPF and WPF entities. Only the crop targets are currently available. Signed-off-by:
-
Laurent Pinchart authored
When operating in DU output mode (deep pipeline to the DU through the LIF), the VSP1 needs to constantly supply frames to the display. To ensure reuse the last queued buffer instead of returning it to the user. Signed-off-by:
-
Laurent Pinchart authored
The MT9V034 sensor is very similar to the MT9V032, with a couple of different registers and parameters. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
To prepare support of the MT9V034, add the necessary infrastructure to support model-specific parameters. Signed-off-by:
-
Laurent Pinchart authored
Identify the model based on the I2C device name and configure formats accordingly. Signed-off-by:
-
Laurent Pinchart authored
The sensor can scale the image down using binning by 1, 2 or 4 in both directions. Update size enumeration and ratio and binning factor computation accordingly. Signed-off-by:
-
Laurent Pinchart authored
The active pixel array size is 753x481 with 4 additional black rows at the top. Fix the driver accordingly. Signed-off-by:
-
Laurent Pinchart authored
The EXT_CLK macro is unused, remove it. Signed-off-by:
-
Laurent Pinchart authored
The comment explaining the usage of the bypass bit is wrong, fix it. Signed-off-by:
-
Laurent Pinchart authored
When a fatal error that prevents any further video streaming occurs in a pipeline, all queued buffers must be marked as erroneous and new buffers must be prevented from being queued. Implement this behaviour with a new omap4iss_pipeline_cancel_stream() function that can be used by submodules to cancel streaming. Signed-off-by:
-
Laurent Pinchart authored
Instead of manually checking whether the CSI2 module is CSI2a or CSI2b in order to select the right subclock to enable/disable, add a subclk field to the iss_csi2 structure, initialize it with the corresponding subclock value and use it at runtime. Signed-off-by:
-
Laurent Pinchart authored
When a failure to stop a module in the pipeline is detected, the only way to recover is to reset the ISS. However, as other users can be using a different pipeline with other modules, the ISS can't be reset synchronously with the error detection. Keep track of modules that have failed to stop, and reset the ISS accordingly when the last user releases the last reference to the ISS. Refuse to start streaming on a pipeline that contains a crashed module, as the hardware wouldn't work anyway. Modify the omap4iss_pipeline_set_stream() function to record the new ISS pipeline state only when no error occurs, except when stopping the pipeline in which case the pipeline is still marked as stopped. Signed-off-by:
-
Laurent Pinchart authored
ISP interrupts are enabled/disabled when starting/stopping the IPIPEIF or resizer. This doesn't permit using the two modules in separate pipelines. Fix it by enabling/disabling the ISP interrupts at the same time as the ISS interrupts, in the ISS device get/put operations. Signed-off-by:
-
Laurent Pinchart authored
Return an error from the s_stream handlers when stopping the stream failed instead of just logging the error and ignoring it. While we're at it, move the logging code from submodules to the driver code. Signed-off-by:
-
Laurent Pinchart authored
List the pixel formats compatible with the active format currently configured on the connected pad. Signed-off-by:
-
Laurent Pinchart authored
The function will be used by a caller that needs the media bus format instead of the pixel format currently returned. Move the media bus format to pixel format conversion to the existing caller. Signed-off-by:
-
Laurent Pinchart authored
The field stores the format description in a human-readable form. Signed-off-by:
-
Laurent Pinchart authored
The Linux kernel recommends lower case for hexadecimal constants. Signed-off-by:
-
Laurent Pinchart authored
When stopping the resizer due to a buffer underrun, disabling RZA only produces input FIFO overflows, most probably when the next frame is received. Disable the whole resizer to work around the problem. Signed-off-by:
-
Laurent Pinchart authored
Replace the direct readl/writel calls with helper functions. Signed-off-by:
-
Laurent Pinchart authored
Replace the direct readl/writel calls with helper functions that take an ISS pointer and compute the register memory address. Also add bit clear, set and update helpers. Signed-off-by:
-
Laurent Pinchart authored
Automatically switch between ULP and ON states based on ULPM signal from complex I/O. Signed-off-by:
-
Laurent Pinchart authored
Input samples must be left-aligned on the ISIF 16-bit data bus. Configure the 16-to-16-bit selector to shift data according to the input format. Signed-off-by:
-
Laurent Pinchart authored
The ISIF generates VD0 interrupts even when writes are disabled. Disabling the ISIF when no buffer is available is thus not be enough, we need to handle the situation explicitly. Signed-off-by:
-
Laurent Pinchart authored
The ternary operator ? : has a low precedence. Use parenthesis where needed. Signed-off-by:
-
Laurent Pinchart authored
Let the compiler decide. Signed-off-by:
-
Laurent Pinchart authored
Add a pretty print function for ISP IRQs and remove the _INT suffix from interrupt names to enhance readability. Signed-off-by:
-
Laurent Pinchart authored
Use a macro to get the VDINT indexed registers. Signed-off-by:
-
Laurent Pinchart authored
Add more register definitions at iss_regs.h and improve some register names. Signed-off-by:
-
Laurent Pinchart authored
Pure CodingStyle fixes. Signed-off-by:
-
Laurent Pinchart authored
Pure CodingStyle fixes. Signed-off-by:
-
Laurent Pinchart authored
Non-split strings help grepping for messages. Signed-off-by:
-
Laurent Pinchart authored
dev_err is preferred over printk(KERN_ERR) when a device pointer is available. Signed-off-by:
-
- 10 Dec, 2013 2 commits
-
-
Kees Cook authored
Stop that, stop that! You're not going to do a song while I'm here. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Archit Taneja authored
When VPDMA fetches or writes to an image buffer, the line stride must be a multiple of 16 bytes. If it isn't, VPDMA HW will write/fetch until the next 16 byte boundry. This causes VPE to work incorrectly for source or destination widths which don't satisfy the above alignment requirement. In order to prevent this, we now make sure that when we set pix format for the input and output buffers, the VPE source and destination image line strides are 16 byte aligned. Also, the motion vector buffers for the de-interlacer are allocated in such a way that it ensures the same alignment. Signed-off-by:
Archit Taneja <archit@ti.com> Signed-off-by:
-
