- 26 Mar, 2018 11 commits
-
-
Ramon Fried authored
IRQ reason was not cheked for errors. Although error handing is not currently supported, it will be nice to output an error value to the log if the DMA operation failed. Signed-off-by:
Ramon Fried <rfried@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Ramon Fried authored
DXE channel defaults used hardcoded magic values. Added bit definitions of the control register and calculate this values in compilation for clarity. Signed-off-by:
-
Ramon Fried authored
DXE descriptor control registers used hardcoded magic values. Added bit definitions of the control register and calculate this values in compilation for clarity. No functional changes. Signed-off-by:
-
Peter Große authored
Signed-off-by:
Peter Große <pegro@friiks.de> Signed-off-by:
-
Sebastian Gottschall authored
Fixes crash seen on arm smp systems (gateworks ventana imx6): Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = 80004000 [00000014] *pgd=00000000 Internal error: Oops - BUG: 17 [#1] PREEMPT SMP ARM Modules linked in: ip6table_filter nf_conntrack_ipv6 ip6_tables nf_log_ipv6 nf_defrag_ipv6 shortcut_fe ipcomp6 xfrm_ipcomp xfrm6_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_ro xfrm6_mode_beet ip6_tunnel tunnel6 mip6 ah6 esp6 xfrm_algo sit ip_tunnel tunnel4 ipv6 ath10k_pci ath10k_core ath9k ath mac80211 cfg80211 compat ath_pci ath_hal(P) caamalg authencesn authenc caamrng caamhash caam_jr caam cdc_ncm usbnet usbcore sky2 imx2_wdt CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: P 4.9.85 #19 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) task: bf064980 task.stack: bf07c000 PC is at relay_buf_full+0xc/0x30 LR is at _674+0x740/0xf10 [ath9k] pc : [<8018bce0>] lr : [<7f1aa604>] psr: 80000013 sp : bf07dbf0 ip : bf07dc00 fp : bf07dbfc r10: 0000003f r9 : bf130e00 r8 : 809044b0 r7 : 00000000 r6 : be67a9f0 r5 : 00000000 r4 : 809043e4 r3 : c0864c24 r2 : 00000000 r1 : 00000004 r0 : 00000000 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 4e6a004a DAC: 00000055 Process ksoftirqd/0 (pid: 3, stack limit = 0xbf07c210) Stack: (0xbf07dbf0 to 0xbf07e000) dbe0: bf07dd04 bf07dc00 7f1aa604 8018bce0 dc00: 00004014 be59e010 bf07dc34 bf07dc18 7f1a7084 7f19c07c be59c010 be6470a0 dc20: 0000096c be648954 bf07dc6c bf07dc38 7f1c286c bf07dd90 bf07dc5c bf07dc48 dc40: 8029ea4c 0000003c 00000001 be59c010 00000094 00000000 00000000 00000000 dc60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dc80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dca0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dcc0: 00000000 00000000 00000000 00000000 00000000 00000000 8010ef24 00000030 dce0: be94f5e8 be6485a0 bddf0200 be59c010 be6465a0 be6415a0 bf07ddf4 bf07dd08 dd00: 7f1cf800 7f1aa55c 1fc38c4c 00000000 bf07dd58 cccccccd 66666667 be640bc0 dd20: bf07dd54 be6415a0 1fc38c4c 00000000 00000000 be59c038 be67a9c0 be59e010 dd40: be67a9f0 be647170 8090c904 be59c010 00000000 00000001 1fc38e84 00000000 dd60: be640bc0 bddf0200 00000200 00000010 0000003f 00000002 20000013 be59c010 dd80: 8092d940 bf7ca2c0 bf07ddb4 bf07dd98 1fc38c4c 2602003f 0100ff1b 80ff1b00 dda0: 00808080 00000000 00000000 80808080 80808080 80808080 80808080 00008080 ddc0: 00000000 00000000 7f1b62b8 00000002 be6470ec be6470f0 00000000 bf07de98 dde0: 8092d940 be6415a0 bf07de94 bf07ddf8 7f1d1ed8 7f1cf1fc 00000000 00000000 de00: bf7cc4c0 00000400 be6470f0 bf07de18 8015165c be59c010 8090453c 8090453c de20: bf07dec4 be6465a0 8014f614 80148884 0000619a 00000001 bf07c000 00000100 de40: bf07de78 00000001 7f327850 00000002 afb50401 bf064980 bf07de9c bf07de68 de60: bf064a00 803cc668 bf064a00 be6470b4 be6470b8 80844180 00000000 bf07de98 de80: 8092d940 bf07c000 bf07dec4 bf07de98 80124d18 7f1d1c44 80124c94 00000000 dea0: 00000006 80902098 80902080 40000006 00000100 bf07c000 bf07df24 bf07dec8 dec0: 8012501c 80124ca0 bf7cc4c0 bf064980 be95e1c0 04208040 80902d00 000061c7 dee0: 0000000a 80600b54 8092d940 808441f8 80902080 bf07dec8 bf03b200 bf07c000 df00: bf03b200 8090fe54 00000000 00000000 00000000 00000000 bf07df34 bf07df28 df20: 80125148 80124f28 bf07df5c bf07df38 8013deb4 8012511c 00000000 bf03b240 df40: bf03b200 8013dc90 00000000 00000000 bf07dfac bf07df60 8013ad40 8013dc9c df60: 70448040 00000001 00000000 bf03b200 00000000 00030003 bf07df78 bf07df78 df80: 00000000 00000000 bf07df88 bf07df88 bf03b240 8013ac48 00000000 00000000 dfa0: 00000000 bf07dfb0 80107760 8013ac54 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 8c120004 1190ad04 Backtrace: [<8018bcd4>] (relay_buf_full) from [<7f1aa604>] (_674+0x740/0xf10 [ath9k]) [<7f1aa550>] (_674 [ath9k]) from [<7f1cf800>] (_582+0x14b4/0x3708 [ath9k]) r10:be6415a0 r9:be6465a0 r8:be59c010 r7:bddf0200 r6:be6485a0 r5:be94f5e8 r4:00000030 [<7f1cf1f0>] (_582 [ath9k]) from [<7f1d1ed8>] (_735+0x2a0/0xec4 [ath9k]) r10:be6415a0 r9:8092d940 r8:bf07de98 r7:00000000 r6:be6470f0 r5:be6470ec r4:00000002 [<7f1d1c38>] (_735 [ath9k]) from [<80124d18>] (tasklet_action+0x84/0xf8) r10:bf07c000 r9:8092d940 r8:bf07de98 r7:00000000 r6:80844180 r5:be6470b8 r4:be6470b4 [<80124c94>] (tasklet_action) from [<8012501c>] (__do_softirq+0x100/0x1f4) r10:bf07c000 r9:00000100 r8:40000006 r7:80902080 r6:80902098 r5:00000006 r4:00000000 r3:80124c94 [<80124f1c>] (__do_softirq) from [<80125148>] (run_ksoftirqd+0x38/0x4c) r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:8090fe54 r5:bf03b200 r4:bf07c000 [<80125110>] (run_ksoftirqd) from [<8013deb4>] (smpboot_thread_fn+0x224/0x260) [<8013dc90>] (smpboot_thread_fn) from [<8013ad40>] (kthread+0xf8/0x100) r9:00000000 r8:00000000 r7:8013dc90 r6:bf03b200 r5:bf03b240 r4:00000000 [<8013ac48>] (kthread) from [<80107760>] (ret_from_fork+0x14/0x34) r7:00000000 r6:00000000 r5:8013ac48 r4:bf03b240 Code: e89da800 e1a0c00d e92dd800 e24cb004 (e5901014) ---[ end trace dddf11ac9111b272 ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: P D 4.9.85 #19 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<8010a708>] (dump_backtrace) from [<8010a99c>] (show_stack+0x18/0x1c) r7:bf093f58 r6:20000193 r5:809168e8 r4:00000000 [<8010a984>] (show_stack) from [<802a09c4>] (dump_stack+0x94/0xa8) [<802a0930>] (dump_stack) from [<8010d184>] (handle_IPI+0xe8/0x180) r7:bf093f58 r6:00000000 r5:00000001 r4:808478c4 [<8010d09c>] (handle_IPI) from [<801013e8>] (gic_handle_irq+0x78/0x7c) r7:f4000100 r6:bf093f58 r5:f400010c r4:8090467c [<80101370>] (gic_handle_irq) from [<8010b378>] (__irq_svc+0x58/0x8c) Exception stack(0xbf093f58 to 0xbf093fa0) 3f40: bf7d62a0 00000000 3f60: 0010a5f4 80113460 bf092000 809043e4 00000002 80904434 bf092008 412fc09a 3f80: 00000000 bf093fb4 bf093fb8 bf093fa8 8010804c 80108050 60000013 ffffffff r9:bf092000 r8:bf092008 r7:bf093f8c r6:ffffffff r5:60000013 r4:80108050 [<80108014>] (arch_cpu_idle) from [<80553c2c>] (default_idle_call+0x30/0x34) [<80553bfc>] (default_idle_call) from [<80158394>] (cpu_startup_entry+0xc4/0xfc) [<801582d0>] (cpu_startup_entry) from [<8010ce40>] (secondary_start_kernel+0x168/0x174) r7:8092d2f8 r4:80913568 [<8010ccd8>] (secondary_start_kernel) from [<10101488>] (0x10101488) r5:00000055 r4:4f07806a Rebooting in 10 seconds.. Reboot failed -- System halted Signed-off-by:
Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by:
-
Karthikeyan Periyasamy authored
When attempt to run worker (ath10k_sta_rc_update_wk) after the station object (ieee80211_sta) delete will trigger the kernel panic. This problem arise in AP + Mesh configuration, Where the current node AP VAP and neighbor node mesh VAP MAC address are same. When the current mesh node try to establish the mesh link with neighbor node, driver peer creation for the neighbor mesh node fails due to duplication MAC address. Already the AP VAP created with same MAC address. It is caused by the following scenario steps. Steps: 1. In above condition, ath10k driver sta_state callback (ath10k_sta_state) fails to do the state change for a station from IEEE80211_STA_NOTEXIST to IEEE80211_STA_NONE due to peer creation fails. Sta_state callback is called from ieee80211_add_station() to handle the new station (neighbor mesh node) request from the wpa_supplicant. 2. Concurrently ath10k receive the sta_rc_update callback notification from the mesh_neighbour_update() to handle the beacon frames of the above neighbor mesh node. since its atomic callback, ath10k driver queue the work (ath10k_sta_rc_update_wk) to handle rc update. 3. Due to driver sta_state callback fails (step 1), mac80211 free the station object. 4. When the worker (ath10k_sta_rc_update_wk) scheduled to run, it will access the station object which is already deleted. so it will trigger kernel panic. Added the peer exist check in sta_rc_update callback before queue the work. Kernel Panic log: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0204000 [00000000] *pgd=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM CPU: 1 PID: 1833 Comm: kworker/u4:2 Not tainted 3.14.77 #1 task: dcef0000 ti: d72b6000 task.ti: d72b6000 PC is at pwq_activate_delayed_work+0x10/0x40 LR is at pwq_activate_delayed_work+0xc/0x40 pc : [<c023f988>] lr : [<c023f984>] psr: 40000193 sp : d72b7f18 ip : 0000007a fp : d72b6000 r10: 00000000 r9 : dd404414 r8 : d8c31998 r7 : d72b6038 r6 : 00000004 r5 : d4907ec8 r4 : dcee1300 r3 : ffffffe0 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5787d Table: 595bc06a DAC: 00000015 ... Process kworker/u4:2 (pid: 1833, stack limit = 0xd72b6238) Stack: (0xd72b7f18 to 0xd72b8000) 7f00: 00000001 dcee1300 7f20: 00000001 c02410dc d8c31980 dd404400 dd404400 c0242790 d8c31980 00000089 7f40: 00000000 d93e1340 00000000 d8c31980 c0242568 00000000 00000000 00000000 7f60: 00000000 c02474dc 00000000 00000000 000000f8 d8c31980 00000000 00000000 7f80: d72b7f80 d72b7f80 00000000 00000000 d72b7f90 d72b7f90 d72b7fac d93e1340 7fa0: c0247404 00000000 00000000 c0208d20 00000000 00000000 00000000 00000000 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c023f988>] (pwq_activate_delayed_work) from [<c02410dc>] (pwq_dec_nr_in_flight+0x58/0xc4) [<c02410dc>] (pwq_dec_nr_in_flight) from [<c0242790>] (worker_thread+0x228/0x360) [<c0242790>] (worker_thread) from [<c02474dc>] (kthread+0xd8/0xec) [<c02474dc>] (kthread) from [<c0208d20>] (ret_from_fork+0x14/0x34) Code: e92d4038 e1a05000 ebffffbc[69210.619376] SMP: failed to stop secondary CPUs Rebooting in 3 seconds.. Signed-off-by:
Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by:
-
Carl Huang authored
The skb may be freed in tx completion context before trace_ath10k_wmi_cmd is called. This can be easily captured when KASAN(Kernel Address Sanitizer) is enabled. The fix is to move trace_ath10k_wmi_cmd before the send operation. As the ret has no meaning in trace_ath10k_wmi_cmd then, so remove this parameter too. Signed-off-by:
Carl Huang <cjhuang@codeaurora.org> Tested-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
-
Ramon Fried authored
Whenever the WLAN interface is started the FW version and caps are printed. The caps now will be displayed only in debug mode. Firmware version will be displayed only once on first startup of the interface. Change-Id: I4db6ea7f384fe15eebe4c3ddb1d1ccab00094332 Signed-off-by:
-
Sriram R authored
This fixes false radar detection (of radar type 7) in Japan region by correcting the radar pulse type to Chirp as per specification. Signed-off-by:
Sriram R <srirrama@codeaurora.org> Signed-off-by:
-
Maharaja Kennadyrajan authored
Export the final Transmit Power Control (TPC) value, which is the minimum of control power and existing TPC value to user space via a new debugfs file "tpc_stats_final" to help with debugging. It works with the new wmi cmd and event introduced in 10.4 firmware branch. WMI command ID: WMI_PDEV_GET_TPC_TABLE_CMDID WMI event ID: WMI_PDEV_TPC_TABLE_EVENTID cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final $ cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final TPC config for channel 5180 mode 10 CTL = 0x 0 Reg. Domain = 58 Antenna Gain = 0 Reg. Max Antenna Gain = 0 Power Limit = 60 Reg. Max Power = 60 Num tx chains = 2 Num supported rates = 109 ******************* CDD POWER TABLE **************** No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3 0 CCK 0x40 0 0 1 CCK 0x41 0 0 [...] 107 HTCUP 0x 0 46 46 108 HTCUP 0x 0 46 46 ******************* STBC POWER TABLE **************** No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3 0 CCK 0x40 0 0 1 CCK 0x41 0 0 [...] 107 HTCUP 0x 0 46 46 108 HTCUP 0x 0 46 46 *********************************** TXBF not supported ********************************** The existing tpc_stats debugfs file provides the dump which is minimum of target power and regulatory domain. cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats Hardware_used: QCA4019 Firmware version: firmware-5.bin_10.4-3.0-00209 Signed-off-by:
Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by:Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by:
-
- 14 Mar, 2018 2 commits
-
-
Toke Høiland-Jørgensen authored
When ath9k was switched over to use the mac80211 intermediate queues, node cleanup now drains the mac80211 queues. However, this call path is not protected by rcu_read_lock() as it was previously entirely internal to the driver which uses its own locking. This leads to a possible rcu_dereference() without holding rcu_read_lock(); but only if a station is cleaned up while having packets queued on the TXQ. Fix this by adding the rcu_read_lock() to the caller in ath9k. Fixes: 50f08edf ("ath9k: Switch to using mac80211 intermediate software queues.") Cc: stable@vger.kernel.org Reported-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
Rakesh Pillai authored
WCN3990 sends mgmt frames by reference via WMI. The host dma maps the mgmt frame and sends the physical address to the firmware in the wmi command. Since the dma mapping is done in the gen_mgmt_tx and if the wmi command send fails, the corresponding mgmt frame is not being dma unmapped. Fix the missing dma unmapping of mgmt tx frame when wmi command sending fails for mgmt tx by reference via WMI. The already exisiting mgmt tx using copy by value does not need such dma unmapping. Add a separate wmi-tlv op for mgmt tx via ref, which takes care of unmapping the dma address, in case of wmi command sending failure. Signed-off-by:
Rakesh Pillai <pillair@codeaurora.org> Signed-off-by:
-
- 27 Feb, 2018 14 commits
-
-
Lior David authored
Added a new debugfs file 'mids' to print the list of virtual interfaces by MAC ID (MID). Allows mapping between the internal MID used by FW and the actual network interface used by the VIF. This is needed by debugging tools. Signed-off-by:
Lior David <liord@codeaurora.org> Signed-off-by:
Maya Erez <merez@codeaurora.org> Signed-off-by:
-
Lior David authored
Track the connection status per-VIF. The data path code is also updated to support multiple VIFs. This includes RX and TX VRING management, NAPI poll loops, RX reordering and related code. Power management code used to check if the main interface is up or based on connection state of the main interface, adapt this code to take all VIFs into account. Signed-off-by:
-
Lior David authored
As more support is added for multiple VIFs, there is a need to protect the wil6210_vif structure from access while it is deleted (mainly from del_virtual_intf operation). Instead of adding another mutex, use p2p_wdev_mutex and rename it to vif_mutex to reflect the added role. Its existing roles are similar so it extends nicely (for example it protects the scan_request member which is also a member of wil6210_vif). Signed-off-by:
-
Lior David authored
Add support for multiple VIFs in the cfg80211 operations start_ap, stop_ap and change_beacon. This change allows starting multiple APs using virtual interfaces. The data path and most other operations are still working only on the main interface. Signed-off-by:
-
Lior David authored
Add generic support in cfg80211 operations add_virtual_intf and del_virtual_intf for adding/removing VIFs of any interface type, and fix change_virtual_intf to allow changing the interface type of a VIF. Previously these operations only worked for the P2P_DEVICE interface which is not a real VIF(it is management-only and shares radio with the main interface). Currently the interface combination is validated, the VIF is added/removed in the firmware and the appropriate net/wireless device is also added/removed. Added minimal support for proper interface up/down and module unload but most operations still work only on the main interface. Signed-off-by:
-
Lior David authored
Simple infrastructure changes for supporting multiple virtual interfaces (multiple VIFs). It is still not possible to add new VIFs so the only VIF belongs to the main interface. Main changes: 1. Add MAC ID(mid) argument to wmi_send and wmi_call to allow invoking WMI commands on different VIFs. 2. Similarly, in WMI event handler look at the mid reported by FW and extract VIF structure (currently only for main interface). All WMI event handlers operate on wil6210_vif structure so they know on which VIF they were called. 3. Trivial changes to use wil6210_vif structure and MID throughout the code. 4. Various changes to logging to report MID. More complete multiple VIFs support will be added gradually in next patches. Signed-off-by:
-
Lior David authored
New FW which supports multiple virtual interfaces, reports its allowed interface combinations using a special comment record in the FW file. The format of the interface combinations is similar to the kernel wiphy->iface_combinations. When parsing FW file during module initialization, also parse and validate the concurrency record, and initialize wiphy->n_iface_combinations and wiphy->iface_combinations accordingly. Signed-off-by:
-
Lior David authored
For supporting multiple virtual interfaces in the future, introduce a wil6210_vif structure which will hold per-VIF data. Change the module initialization so wil6210_vif will be part of net_device structure, and wireless_dev will be embedded inside the wil6210_vif structure. This will allow us to find the appropriate wil6210_vif structure when we only have access to wireless_dev or net_device. Signed-off-by:
-
Loic Poulain authored
The wcn36xx_cancel_hw_scan method stops the hw scan and notify the scan completion via ieee80211_scan_completed. However, on scan offload cancellation, firmware sends a scan complete indication, triggering a new call to ieee80211_scan_completed. This leads to kernel warn since the scan has already been completed. Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
Wojciech Dubowik authored
Ack timing generation has to be adapted for 5/10 MHz channels. Do it by properly initializing ack shift field in TXSIFS register. Ack shift assumes channel width of 2.5 Mhz so value zero means 2.5 MHz, 1 is 5 MHz and so on. Signed-off-by:
Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by:
-
Wojciech Dubowik authored
The bitrate value for airtime calculation is specified for full rates. We need to divide it for 5 and 10MHz channels to get correct result. Signed-off-by:
-
Colin Ian King authored
Pointer tq is initialized with &ah->ah_txq[queue] and then a few lines later is re-assigned the same value, hence this duplicate assignment is redundant and can be removed. Cleans up clang warning: drivers/net/wireless/ath/ath5k/qcu.c:326:25: warning: Value stored to 'tq' during its initialization is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Ryan Hsu authored
Preparation for a new QCA9377 firmware release. The new firmware release requires more IRAM banks, hence update that on ath10k. The IRAM banks promotion won't break any backwards compatibility, as those IRAM banks were not getting used in previous firmware releases. Signed-off-by:
Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by:
-
Govind Singh authored
HIF power-on failure is applicable to each underlying bus type. Fix log message for hif power on failure. Signed-off-by:
Govind Singh <govinds@codeaurora.org> Signed-off-by:
-
- 26 Feb, 2018 2 commits
-
-
Colin Ian King authored
Trivial fix to spelling mistake in debug error message text. Signed-off-by:
-
Ignacio Nunez Hernanz authored
Whenever ath10k firmware discards a packet (HTT_TX_COMPL_STATE_DISCARD flag), the skb is freed and mac80211 does not get feedback through ieee80211_tx_status(). Instead, make sure that the IEEE80211_TX_STAT_ACK flag is disabled and let the packet go through, like ath9k does. Signed-off-by:
Ignacio Nunez Hernanz <nacho.nunez@aoifes.com> [kvalo@codeaurora.org: rebase patch manually] Signed-off-by:
-
- 24 Feb, 2018 1 commit
-
-
- 23 Feb, 2018 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh. 2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang. 3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song. 4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang. 5) Fix potential deadlocks in netfilter getsockopt() code paths, from Paolo Abeni. 6) Netfilter stackpointer size checks really are needed to validate user input, from Florian Westphal. 7) Missing timer init in x_tables, from Paolo Abeni. 8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg. 9) When an ibmvnic device is brought down then back up again, it can be sent queue entries from a previous session, handle this properly instead of crashing. From Thomas Falcon. 10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman. 11) When we are dumping filters in cls_api, the output SKB is empty, and the filter we are dumping is too large for the space in the SKB, we should return -EMSGSIZE like other netlink dump operations do. Otherwise userland has no signal that is needs to increase the size of its read buffer. From Roman Kapl. 12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer. 13) Module refcount leak in netlink when a dump start fails, from Jason Donenfeld. 14) Handle sub-optimal GSO sizes better in TCP BBR congestion control, from Eric Dumazet. 15) Releasing bpf per-cpu arraymaps can take a long time, add a condtional scheduling point. From Eric Dumazet. 16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From Daniel Borkmann. 17) Fix page leak in gianfar driver, from Andy Spencer. 18) Missed clearing of estimator scratch buffer, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net_sched: gen_estimator: fix broken estimators based on percpu stats gianfar: simplify FCS handling and fix memory leak ipv6 sit: work around bogus gcc-8 -Wrestrict warning macvlan: fix use-after-free in macvlan_common_newlink() bpf, arm64: fix out of bounds access in tail call bpf, x64: implement retpoline for tail call rxrpc: Fix send in rxrpc_send_data_packet() net: aquantia: Fix error handling in aq_pci_probe() bpf: fix rcu lockdep warning for lpm_trie map_free callback bpf: add schedule points in percpu arrays management regulatory: add NUL to request alpha2 ibmvnic: Fix early release of login buffer net/smc9194: Remove bogus CONFIG_MAC reference net: ipv4: Set addr_type in hash_keys for forwarded case tcp_bbr: better deal with suboptimal GSO smsc75xx: fix smsc75xx_set_features() netlink: put module reference if dump start fails selftests/bpf/test_maps: exit child process without error in ENOMEM case selftests/bpf: update gitignore with test_libbpf_open selftests/bpf: tcpbpf_kern: use in6_* macros from glibc .. -
Linus Torvalds authored
Merge branch 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris: - keys fixes via David Howells: "A collection of fixes for Linux keyrings, mostly thanks to Eric Biggers: - Fix some PKCS#7 verification issues. - Fix handling of unsupported crypto in X.509. - Fix too-large allocation in big_key" - Seccomp updates via Kees Cook: "These are fixes for the get_metadata interface that landed during -rc1. While the new selftest is strictly not a bug fix, I think it's in the same spirit of avoiding bugs" - an IMA build fix from Randy Dunlap * 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: integrity/security: fix digsig.c build error with header file KEYS: Use individual pages in big_key for crypto buffers X.509: fix NULL dereference when restricting key with unsupported_sig X.509: fix BUG_ON() when hash algorithm is unsupported PKCS#7: fix direct verification of SignerInfo signature PKCS#7: fix certificate blacklisting PKCS#7: fix certificate chain verification seccomp: add a selftest for get_metadata ptrace, seccomp: tweak get_metadata behavior slightly seccomp, ptrace: switch get_metadata types to arch independent
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: "arm64 and perf fixes: - build error when accessing MPIDR_HWID_BITMASK from .S - fix CTR_EL0 field definitions - remove/disable some kernel messages on user faults (unhandled signals, unimplemented syscalls) - fix kernel page fault in unwind_frame() with function graph tracing - fix perf sleeping while atomic errors when booting with ACPI" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix unwind_frame() for filtered out fn for function graph tracing arm64: Enforce BBM for huge IO/VMAP mappings arm64: perf: correct PMUVer probing arm_pmu: acpi: request IRQs up-front arm_pmu: note IRQs and PMUs per-cpu arm_pmu: explicitly enable/disable SPIs at hotplug arm_pmu: acpi: check for mismatched PPIs arm_pmu: add armpmu_alloc_atomic() arm_pmu: fold platform helpers into platform code arm_pmu: kill arm_pmu_platdata ARM: ux500: remove PMU IRQ bouncer arm64: __show_regs: Only resolve kernel symbols when running at EL1 arm64: Remove unimplemented syscall log message arm64: Disable unhandled signal log messages by default arm64: cpufeature: Fix CTR_EL0 field definitions arm64: uaccess: Formalise types for access_ok() arm64: Fix compilation error while accessing MPIDR_HWID_BITMASK from .S files -
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mipsLinus Torvalds authored
Pull MIPS fix from James Hogan: "A single MIPS fix for mismatching struct compat_flock, resulting in bus errors starting Firefox on Debian 8 since 4.13" * tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: Drop spurious __unused in struct compat_flock
-
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printkLinus Torvalds authored
Pull printk fixlet from Petr Mladek: "People expect to see the real pointer value for %px. Let's substitute '(null)' only for the other %p? format modifiers that need to deference the pointer" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: vsprintf: avoid misleading "(null)" for %px
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Two bugfixes, one v4.16 regression fix, and two documentation fixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Consider SCL GPIO optional i2c: busses: i2c-sirf: Fix spelling: "formular" -> "formula". i2c: bcm2835: Set up the rising/falling edge delays i2c: i801: Add missing documentation entries for Braswell and Kaby Lake i2c: designware: must wait for enable
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "These are mostly fixes for problems with merge window code. In addition we have one doc update (alua) and two dead code removals (aiclib and octogon) a spurious assignment removal (csiostor) and a performance improvement for storvsc involving better interrupt spreading and increasing the command per lun handling" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla4xxx: skip error recovery in case of register disconnect. scsi: aacraid: fix shutdown crash when init fails scsi: qedi: Cleanup local str variable scsi: qedi: Fix truncation of CHAP name and secret scsi: qla2xxx: Fix incorrect handle for abort IOCB scsi: qla2xxx: Fix double free bug after firmware timeout scsi: storvsc: Increase cmd_per_lun for higher speed devices scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els() scsi: scsi_dh: Document alua_rtpg_queue() arguments scsi: Remove Makefile entry for oktagon files scsi: aic7xxx: remove aiclib.c scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion() scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo() scsi: sym53c8xx_2: iterator underflow in sym_getsync() scsi: bnx2fc: Fix check in SCSI completion handler for timed out request scsi: csiostor: remove redundant assignment to pointer 'ln' scsi: ufs: Enable quirk to ignore sending WRITE_SAME command scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info scsi: qla2xxx: Fix memory corruption during hba reset test scsi: mpt3sas: fix an out of bound write
-
Donald Sharp authored
For ages iproute2 has used `struct rtmsg` as the ancillary header for FIB rules and in the process set the protocol value to RTPROT_BOOT. Until ca56209a66 ("net: Allow a rule to track originating protocol") the kernel rules code ignored the protocol value sent from userspace and always returned 0 in notifications. To avoid incompatibility with existing iproute2, send the protocol as a new attribute. Fixes: cac56209 ("net: Allow a rule to track originating protocol") Signed-off-by:Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A bunch of fixes for rc3: Exynos: - fixes for using monotonic timestamps - register definitions - removal of unused file ipu-v3L - minor changes - make some register arrays const+static - fix some leaks meson: - fix for vsync atomic: - fix for memory leak EDID parser: - add quirks for some more non-desktop devices - 6-bit panel fix. drm_mm: - fix a bug in the core drm mm hole handling cirrus: - fix lut loading regression Lastly there is a deadlock fix around runtime suspend for secondary GPUs. There was a deadlock between one thread trying to wait for a workqueue job to finish in the runtime suspend path, and the workqueue job it was waiting for in turn waiting for a runtime_get_sync to return. The fixes avoids it by not doing the runtime sync in the workqueue as then we always wait for all those tasks to complete before we runtime suspend" * tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm/tve200: fix kernel-doc documentation comment include drm/edid: quirk Sony PlayStation VR headset as non-desktop drm/edid: quirk Windows Mixed Reality headsets as non-desktop drm/edid: quirk Oculus Rift headsets as non-desktop drm/meson: fix vsync buffer update drm: Handle unexpected holes in color-eviction drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1 drm/exynos: remove exynos_drm_rotator.h drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions drm/exynos: fix comparison to bitshift when dealing with a mask drm/exynos: g2d: use monotonic timestamps drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle drm/amdgpu: Fix deadlock on runtime suspend drm/radeon: Fix deadlock on runtime suspend drm/nouveau: Fix deadlock on runtime suspend drm: Allow determining if current task is output poll worker ...
-
Willem de Bruijn authored
The packet fanout test generates UDP traffic and reads this with a pair of packet sockets, testing the various fanout algorithms. Avoid non-determinism from reading unrelated background traffic. Fanout decisions are made before unrelated packets can be dropped with a filter, so that is an insufficient strategy [*]. Run the packet socket tests in a network namespace, similar to msg_zerocopy. It it still good practice to install a filter on a packet socket before accepting traffic. Because this is example code, demonstrate that pattern. Open the socket initially bound to no protocol, install a filter, and only then bind to ETH_P_IP. Another source of non-determinism is hash collisions in FANOUT_HASH. The hash function used to select a socket in the fanout group includes the pseudorandom number hashrnd, which is not visible from userspace. To work around this, the test tries to find a pair of UDP source ports that do not collide. It gives up too soon (5 times, every 32 runs) and output is confusing. Increase tries to 20 and revise the error msg. [*] another approach would be to add a third socket to the fanout group and direct all unexpected traffic here. This is possible only when reimplementing methods like RR or HASH alongside this extra catch-all bucket, using the BPF fanout method. Signed-off-by:Willem de Bruijn <willemb@google.com> Signed-off-by:
-
