LP5521 is a three channel led driver with support
for hardware accelerated patterns (currently used
via lp5521-only sysfs interface).

Currently, it's used on n810 device.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Sometimes it's awkward to make sure that the array in the
platform_data handed to the leds-gpio driver has only valid
data ... some leds may not be always available, and coping
with that currently requires patching or rebuilding the array.

This patch fixes that by making it be OK to pass an invalid
GPIO (such as "-EINVAL") ... such table entries are skipped.

[rpurdie@linux.intel.com: adjusted to apply against other led tree changes]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Tested-by: Diego Dompe <diego.dompe@ridgerun.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

This fixes the expression in the driver to do the correct thing,
not that I think anyone would send SND_* without EV_SND.

Thanks to Roel Kluin <roel.kluin@gmail.com> for noticing.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

A pointer to h1940leds_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

This goto is unnecessary.
Signed-off-by: Zhenwen Xu <helight.xu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

ROHM BD2802GU is a RGB LED controller attached to i2c bus and specifically
engineered for decoration purposes.  This RGB controller incorporates
lighting patterns and illuminates.

This driver is designed to minimize power consumption, so when there is no
emitting LED, it enters to reset state.  And because the BD2802GU has lots
of features that can't be covered by the current LED framework, it
provides Advanced Configuration Function(ADF) mode, so that user
applications can set registers of BD2802GU directly.

Here are basic usage examples :
; to turn on LED (not blink)
$ echo 1 > /sys/class/leds/led1_R/brightness
; to blink LED
$ echo timer > /sys/class/leds/led1_R/trigger
$ echo 1 > /sys/class/leds/led1_R/delay_on
$ echo 1 > /sys/class/leds/led1_R/delay_off
; to turn off LED
$ echo 0 > /sys/class/leds/led1_R/brightness

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Kim Kyuwon <chammoru@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

The leds-clevo-mail driver is in the mainline kernel since 2.6.25 and works
without severe problems. Make this driver available for a larger audience.
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Signed-off-by: Adam Nielsen <a.nielsen@shikadi.net>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

The gpio led trigger will allow leds to be triggered by
gpio events.

When we give the led a gpio number, the trigger will
request_irq() on that so we don't have to keep polling
for gpio state.

It's useful for usecases as n810's keypad leds that could
be triggered by the gpio event generated when user slides
up to show the keypad.

We also provide means for userland to tell us what is the
desired brightness for that special led when it goes on
so userland could use information from ambient light sensors
and not set led brightness too high if it's not necessary.
Signed-off-by: Felipe Balbi <me@felipebalbi.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Mikrotik built six LEDs into the Routerboard 532, from which one is
destined for custom use, the so called "User LED". This patch adds a
driver for it, based on the LEDs class.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Add an option to preserve LED state when suspending/resuming to the LED
gpio driver. Based on a suggestion from Robert Jarzmik.
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Add a simple driver for pwm driver LEDs.  pwm_id and period can be defined
in board file.  It is developed for pxa, however it is probably generic
enough to be used on other platforms with pwm.
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

You can't have multiple module_init()/module_exit calls so resort to messy
ifdefs potentially pending some code refactoring.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Add an LED driver using the DAC124S085 DAC from NatSemi

[randy.dunlap@oracle.com: use header files for interfaces]
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

This patch allows drivers to override the default maximum brightness value
of 255.  We take care to preserve backwards-compatibility as much as
possible, so that user-space ABI doesn't change for existing drivers.
LED trigger code has also been updated to use the per-LED maximum.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Add bindings to support LEDs defined as of_platform devices in addition to
the existing bindings for platform devices.

New options in Kconfig allow the platform binding code and/or the
of_platform code to be turned on.  The of_platform code is of course only
available on archs that have OF support.

The existing probe and remove methods are refactored to use new functions
create_gpio_led(), to create and register one led, and delete_gpio_led(),
to unregister and free one led.  The new probe and remove methods for the
of_platform driver can then share most of the common probe and remove code
with the platform driver.

The suspend and resume methods aren't shared, but they are very short.  The
actual led driving code is the same for LEDs created by either binding.

The OF bindings are based on patch by Anton Vorontsov
<avorontsov@ru.mvista.com>.  They have been extended to allow multiple LEDs
per device.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

* 'audit.b62' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  Audit: remove spaces from audit_log_d_path
  audit: audit_set_auditable defined but not used
  audit: incorrect ref counting in audit tree tag_chunk
  audit: Fix possible return value truncation in audit_get_context()
  audit: ignore terminating NUL in AUDIT_USER_TTY messages
  Audit: fix handling of 'strings' with NULL characters
  make the e->rule.xxx shorter in kernel auditfilter.c
  auditsc: fix kernel-doc notation
  audit: EXECVE record - removed bogus newline

* 'for-next' of git://git.o-hand.com/linux-mfd:
  mfd: fix da903x warning
  mfd: fix MAINTAINERS entry
  mfd: Use the value of the final spin when reading the AUXADC
  mfd: Storage class should be before const qualifier
  mfd: PASIC3: supply clock_rate to DS1WM via driver_data
  mfd: remove DS1WM clock handling
  mfd: remove unused PASIC3 bus_shift field
  pxa/magician: remove deprecated .bus_shift from PASIC3 platform_data
  mfd: convert PASIC3 to use MFD core
  mfd: convert DS1WM to use MFD core
  mfd: Support active high IRQs on WM835x
  mfd: Use bulk read to fill WM8350 register cache
  mfd: remove duplicated #include from pcf50633

* 'for-linus' of git://repo.or.cz/cris-mirror:
  CRISv32: Remove extraneous space between -I and the path.
  cris: convert obsolete hw_interrupt_type to struct irq_chip
  BUG to BUG_ON changes
  cpumask: use mm_cpumask() wrapper: cris
  cpumask: Use accessors code.: cris
  cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits.: cris

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (140 commits)
  ACPI: processor: use .notify method instead of installing handler directly
  ACPI: button: use .notify method instead of installing handler directly
  ACPI: support acpi_device_ops .notify methods
  toshiba-acpi: remove MAINTAINERS entry
  ACPI: battery: asynchronous init
  acer-wmi: Update copyright notice & documentation
  acer-wmi: Cleanup the failure cleanup handling
  acer-wmi: Blacklist Acer Aspire One
  video: build fix
  thinkpad-acpi: rework brightness support
  thinkpad-acpi: enhanced debugging messages for the fan subdriver
  thinkpad-acpi: enhanced debugging messages for the hotkey subdriver
  thinkpad-acpi: enhanced debugging messages for rfkill subdrivers
  thinkpad-acpi: restrict access to some firmware LEDs
  thinkpad-acpi: remove HKEY disable functionality
  thinkpad-acpi: add new debug helpers and warn of deprecated atts
  thinkpad-acpi: add missing log levels
  thinkpad-acpi: cleanup debug helpers
  thinkpad-acpi: documentation cleanup
  thinkpad-acpi: drop ibm-acpi alias
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits)
  sh: sh7785lcr: Map whole PCI address space.
  sh: Fix up DSP context save/restore.
  sh: Fix up number of on-chip DMA channels on SH7091.
  sh: update defconfigs.
  sh: Kill off broken direct-mapped cache mode.
  sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle.
  sh: Add a command line option for disabling I/O trapping.
  sh: Select ARCH_HIBERNATION_POSSIBLE.
  sh: migor: Fix up CEU use flags.
  input: migor_ts: add wakeup support
  rtc: rtc-sh: use set_irq_wake()
  input: sh_keysc: use enable/disable_irq_wake()
  sh: intc: set_irq_wake() support
  sh: intc: install enable, disable and shutdown callbacks
  clocksource: sh_cmt: use remove_irq() and remove clockevent workaround
  sh: ap325 and Migo-R use new sh_mobile_ceu_info flags
  sh: Fix up -Wformat-security whining.
  sh: ap325rxa: Add ov772x support, again.
  sh: Sanitize asm/mmu.h for assembly use.
  sh: Tidy up sh7786 pinmux table.
  ...

* 'avr32-arch' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: add hardware handshake support to atmel_serial
  avr32: add RTS/CTS/CLK pin selection for the USARTs
  Add RTC support for Merisc boards
  avr32: at32ap700x: setup DMA for AC97C in the machine code
  avr32: at32ap700x: setup DMA for ABDAC in the machine code
  Add Merisc board support
  avr32: use gpio_is_valid() to check USBA vbus_pin I/O line
  atmel-usba-udc: use gpio_is_valid() to check vbus_pin I/O line
  avr32: fix timing LCD parameters for EVKLCD10X boards
  avr32: use GPIO line PB15 on EVKLCD10x boards for backlight
  avr32: configure MCI detect and write protect pins for EVKLCD10x boards
  avr32: set pin mask to alternative 18 bpp for EVKLCD10x boards
  avr32: add pin mask for 18-bit color on the LCD controller
  avr32: fix 15-bit LCDC pin mask to use MSB lines

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (714 commits)
  Staging: sxg: slicoss: Specify the license for Sahara SXG and Slicoss drivers
  Staging: serqt_usb: fix build due to proc tty changes
  Staging: serqt_usb: fix checkpatch errors
  Staging: serqt_usb: add TODO file
  Staging: serqt_usb: Lindent the code
  Staging: add USB serial Quatech driver
  staging: document that the wifi staging drivers a bit better
  Staging: echo cleanup
  Staging: BUG to BUG_ON changes
  Staging: remove some pointless conditionals before kfree_skb()
  Staging: line6: fix build error, select SND_RAWMIDI
  Staging: line6: fix checkpatch errors in variax.c
  Staging: line6: fix checkpatch errors in toneport.c
  Staging: line6: fix checkpatch errors in pcm.c
  Staging: line6: fix checkpatch errors in midibuf.c
  Staging: line6: fix checkpatch errors in midi.c
  Staging: line6: fix checkpatch errors in dumprequest.c
  Staging: line6: fix checkpatch errors in driver.c
  Staging: line6: fix checkpatch errors in audio.c
  Staging: line6: fix checkpatch errors in pod.c
  ...

* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits)
  tracing, net: fix net tree and tracing tree merge interaction
  tracing, powerpc: fix powerpc tree and tracing tree interaction
  ring-buffer: do not remove reader page from list on ring buffer free
  function-graph: allow unregistering twice
  trace: make argument 'mem' of trace_seq_putmem() const
  tracing: add missing 'extern' keywords to trace_output.h
  tracing: provide trace_seq_reserve()
  blktrace: print out BLK_TN_MESSAGE properly
  blktrace: extract duplidate code
  blktrace: fix memory leak when freeing struct blk_io_trace
  blktrace: fix blk_probes_ref chaos
  blktrace: make classic output more classic
  blktrace: fix off-by-one bug
  blktrace: fix the original blktrace
  blktrace: fix a race when creating blk_tree_root in debugfs
  blktrace: fix timestamp in binary output
  tracing, Text Edit Lock: cleanup
  tracing: filter fix for TRACE_EVENT_FORMAT events
  ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release()
  x86: kretprobe-booster interrupt emulation code fix
  ...

Fix up trivial conflicts in
 arch/parisc/include/asm/ftrace.h
 include/linux/memory.h
 kernel/extable.c
 kernel/module.c

audit_log_d_path had spaces in the strings which would be emitted on the
error paths.  This patch simply replaces those spaces with an _ or removes
the needless spaces entirely.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

after 0590b933 audit_set_auditable() is now only
used by the audit tree code.  If CONFIG_AUDIT_TREE is unset it will be defined
but unused.  This patch simply moves the function inside a CONFIG_AUDIT_TREE
block.

cc1: warnings being treated as errors
/home/acme_unencrypted/git/linux-2.6-tip/kernel/auditsc.c:745: error: ‘audit_set_auditable’ defined but not used
make[2]: *** [kernel/auditsc.o] Error 1
make[1]: *** [kernel] Error 2
make[1]: *** Waiting for unfinished jobs....
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

tag_chunk has bad exit paths in which the inotify ref counting is wrong.
At the top of the function we found &old_watch using  inotify_find_watch().
inotify_find_watch takes a reference to the watch.  This is never dropped
on an error path.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The audit subsystem treats syscall return codes as type long, unfortunately
the audit_get_context() function mistakenly converts the return code to an
int type in the parameters which could cause problems on systems where the
sizeof(int) != sizeof(long).
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

AUDIT_USER_TTY, like all other messages sent from user-space, is sent
NUL-terminated.  Unlike other user-space audit messages, which come only
from trusted sources, AUDIT_USER_TTY messages are processed using
audit_log_n_untrustedstring().

This patch modifies AUDIT_USER_TTY handling to ignore the trailing NUL
and use the "quoted_string" representation of the message if possible.
Signed-off-by: Miloslav Trmac <mitr@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

currently audit_log_n_untrustedstring() uses audit_string_contains_control()
to check if the 'string' has any control characters.  If the 'string' has an
embedded NULL audit_string_contains_control() will return that the data has
no control characters and will then pass the string to audit_log_n_string
with the total length, not the length up to the first NULL.
audit_log_n_string() does a memcpy of the entire length and so the actual
audit record emitted may then contain a NULL and then whatever random memory
is after the NULL.

Since we want to log the entire octet stream (if we can't trust the data
to be a string we can't trust that a NULL isn't actually a part of it)
we should just consider NULL as a control character.  If the caller is
certain they want to stop at the first NULL they should be using
audit_log_untrustedstring.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

make the e->rule.xxx shorter in kernel/auditfilter.c
--
---------------------------------
Zhenwen Xu - Open and Free
Home Page:	http://zhwen.org
My Studio:	http://dim4.cn

>From 99692dc640b278f1cb1a15646ce42f22e89c0f77 Mon Sep 17 00:00:00 2001
From: Zhenwen Xu <Helight.Xu@gmail.com>
Date: Thu, 12 Mar 2009 22:04:59 +0800
Subject: [PATCH] make the e->rule.xxx shorter in kernel/auditfilter.c
Signed-off-by: Zhenwen Xu <Helight.Xu@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Fix auditsc kernel-doc notation:

Warning(linux-2.6.28-git7//kernel/auditsc.c:2156): No description found for parameter 'attr'
Warning(linux-2.6.28-git7//kernel/auditsc.c:2156): Excess function parameter 'u_attr' description in '__audit_mq_open'
Warning(linux-2.6.28-git7//kernel/auditsc.c:2204): No description found for parameter 'notification'
Warning(linux-2.6.28-git7//kernel/auditsc.c:2204): Excess function parameter 'u_notification' description in '__audit_mq_notify'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc:	Al Viro <viro@zeniv.linux.org.uk>
cc:	Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

(updated)
Added hunk that changes the comment, the rest is the same.

EXECVE records contain a newline after every argument. auditd converts
"\n" to " " so you cannot see newlines even in raw logs, but they're
there nevertheless. If you're not using auditd, you need to work round
them. These '\n' chars are can be easily replaced by spaces when
creating record in kernel. Note there is no need for trailing '\n' in
an audit record.

record before this patch:
"type=EXECVE msg=audit(1231421801.566:31): argc=4 a0=\"./test\"\na1=\"a\"\na2=\"b\"\na3=\"c\"\n"

record after this patch:
"type=EXECVE msg=audit(1231421801.566:31): argc=4 a0=\"./test\" a1=\"a\" a2=\"b\" a3=\"c\""
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge branch 'bzip2-lzma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip

* 'bzip2-lzma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
  bzip2/lzma: quiet Kconfig warning for INITRAMFS_COMPRESSION_NONE

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits)
  cpumask: remove cpumask allocation from idle_balance, fix
  numa, cpumask: move numa_node_id default implementation to topology.h, fix
  cpumask: remove cpumask allocation from idle_balance
  x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus
  x86: cpumask: update 32-bit APM not to mug current->cpus_allowed
  x86: microcode: cleanup
  x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c
  cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash
  numa, cpumask: move numa_node_id default implementation to topology.h
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  cpumask: remove x86 cpumask_t uses.
  cpumask: use cpumask_var_t in uv_flush_tlb_others.
  cpumask: remove cpumask_t assignment from vector_allocation_domain()
  cpumask: make Xen use the new operators.
  cpumask: clean up summit's send_IPI functions
  cpumask: use new cpumask functions throughout x86
  x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask
  cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  x86: unify 32 and 64-bit node_to_cpumask_map
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param:
  module: use strstarts()
  strstarts: helper function for !strncmp(str, prefix, strlen(prefix))
  arm: allow usage of string functions in linux/string.h
  module: don't use stop_machine on module load
  module: create a request_module_nowait()
  module: include other structures in module version check
  module: remove the SHF_ALLOC flag on the __versions section.
  module: clarify the force-loading taint message.
  module: Export symbols needed for Ksplice
  Ksplice: Add functions for walking kallsyms symbols
  module: remove module_text_address()
  module: __module_address
  module: Make find_symbol return a struct kernel_symbol
  kernel/module.c: fix an unused goto label
  param: fix charp parameters set via sysfs

Fix trivial conflicts in kernel/extable.c manually.

* 'core/debugobjects' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  debugobjects: delay free of internal objects
  debugobjects: replace static objects when slab cache becomes available
  debug_objects: add boot-parameter toggle to turn object debugging off again

* 'printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  printk: correct the behavior of printk_timed_ratelimit()
  vsprintf: unify the format decoding layer for its 3 users, cleanup
  fix regression from "vsprintf: unify the format decoding layer for its 3 users"
  vsprintf: fix bug in negative value printing
  vsprintf: unify the format decoding layer for its 3 users
  vsprintf: add binary printf
  printk: introduce printk_once()

Fix trivial conflicts (printk_once vs log_buf_kexec_setup() added near
each other) in include/linux/kernel.h.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (42 commits)
  atmel-mci: fix sdc_reg typo
  tmio_mmc: add maintainer
  mmc: Add OpenFirmware bindings for SDHCI driver
  sdhci: Add quirk for forcing maximum block size to 2048 bytes
  sdhci: Add quirk for controllers that need IRQ re-init after reset
  sdhci: Add quirk for controllers that need small delays for PIO
  sdhci: Add set_clock callback and a quirk for nonstandard clocks
  sdhci: Add get_{max,timeout}_clock callbacks
  sdhci: Add support for hosts reporting inverted write-protect state
  sdhci: Add support for card-detection polling
  sdhci: Enable only relevant (DMA/PIO) interrupts during transfers
  sdhci: Split card-detection IRQs management from sdhci_init()
  sdhci: Add support for bus-specific IO memory accessors
  mmc_spi: adjust for delayed data token response
  omap_hsmmc: Wait for SDBP
  omap_hsmmc: Fix MMC3 dma
  omap_hsmmc: Disable SDBP at suspend
  omap_hsmmc: Do not prefix slot name
  omap_hsmmc: Allow cover switch to cause rescan
  omap_hsmmc: Add 8-bit bus width mode support
  ...

This patch adds a .notify() method.  The presence of .notify() causes
Linux/ACPI to manage event handlers and notify handlers on our behalf,
so we don't have to install and remove them ourselves.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Zhang Rui <rui.zhang@intel.com>
CC: Zhao Yakui <yakui.zhao@intel.com>
CC: Venki Pallipadi <venkatesh.pallipadi@intel.com>
CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>