- 21 May, 2014 11 commits
-
-
Ezequiel Garcia authored
This commit makes use of the chip->ecc_strength_ds and chip->ecc_step_ds which contain the datasheet minimum requested ECC strength to produce a noisy warning if the configured ECC strength is weaker. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
pekon gupta authored
- Adds DT binding property for BCH16 ECC scheme - Adds describes on factors which determine choice of ECC scheme for particular device CC: devicetree@vger.kernel.org Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
pekon gupta authored
This patch add support for BCH16 ecc-scheme in OMAP NAND driver, by extending following functions: - omap_enable_hwecc (nand_chip->ecc.hwctl): configure GPMC controller - omap_calculate_ecc_bch (nand_chip->ecc.calculate): fetch ECC signature from GPMC controller - omap_elm_correct_data (nand_chip->ecc.correct): detect and correct ECC errors using ELM (a) BCH16 ecc-scheme can detect and correct 16 bit-flips per 512Bytes of data. (b) BCH16 ecc-scheme generates 26-bytes of ECC syndrome / 512B. Due to (b) this scheme can only be used with NAND devices which have enough OOB to satisfy the relation: "OOBsize per page >= 26 * (page-size / 512)" Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
pekon gupta authored
ELM hardware engine is used to detect ECC errors for BCHx ecc-schemes (like BCH4/BCH8/BCH16). This patch extends configuration of ELM registers for adding support of BCH16_HW ecc-scheme. Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
pekon gupta authored
This patch add support for BCH16_ECC in GPMC (controller) driver: - extends configuration space to include BCH16 registers - extends parsing of DT binding for selecting BCH16 ecc-scheme Signed-off-by: Pekon Gupta <pekon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Ron Lee authored
Signed-off-by: Ron Lee <ron@debian.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Vincenzo Aliberti authored
Signed-off-by: Vincenzo Aliberti <vincenzo.aliberti@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Philippe De Muyter authored
Enhances the help for the CFI command set choices. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Joe Schultz authored
A workaround was already in place that set the WP bit in the IFC_CSPR0 register after a STATUS command, however it used an 8-bit write method. As a result, the WP bit was never set on 16-bit devices, and these devices would eventually be incorrectly marked as write-protected. This patch checks the chip options for a 16-bit device and uses the appropriate write method to set the WP bit after a STATUS command. Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Aaron Sierra authored
The IFC buffer is accessed via 8-bit and 16-bit accessors. Changing the 'addr' member of 'struct fsl_ifc_nand_ctrl' from 'u8 __iomem *' to 'void __iomem *' eliminates the need for explicit casts when the 16-bit accessors are used. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Dan Carpenter authored
The break statements should be indented another tab. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 20 May, 2014 9 commits
-
-
Kamal Dasu authored
nand_base can be passed a kmap()'d buffers from highmem by filesystems like jffs2. This results in failure to map the physical address of the DMA buffer on various contoller driver on different platforms. This change adds a chip option to use preallocated databuf as bounce buffers used in nand_do_read_ops() and nand_do_write_ops(). This allows for specific nand controller driver to set this option as needed. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Huang Shijie authored
The m25p80.c has used the SPI NOR framework now, and the m25p_ids has been moved to spi-nor.c and renamed to spi_nor_ids. This patch updates the document for m25p80. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Pekon Gupta authored
As subpage write is enabled by default for all drivers, nand_write_subpage_hwecc causes a crash if the driver did not register ecc->hwctl or ecc->calculate. This behavior was introduced in commit 837a6ba4 "mtd: nand: subpage write support for hardware based ECC schemes". This fixes a crash by emulating subpage write support by padding sub-page data with 0xff on either sides to make it full page compatible. Reported-by: Helmut Schaa <helmut.schaa@googlemail.com> Tested-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Scott Wood <scottwood@freescale.com> Cc: <stable@vger.kernel.org> # 3.10.x+ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Arnd Bergmann authored
The samsung onenand driver passes around a dma address token through a void pointer, which is incorrect and leads to warnings like this one: onenand/samsung.c:548:2: warning: passing argument 1 of '__fswab32' makes integer from pointer without a cast [enabled by default] writel(src, base + S5PC110_DMA_SRC_ADDR); ^ This patch makes it use dma_addr_t here, which is more appropriate. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Jingoo Han authored
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Jingoo Han authored
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Jingoo Han authored
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Geert Uytterhoeven authored
On m68k, where access_ok() doesn't cast the address parameter: drivers/mtd/mtdchar.c: In function 'mtdchar_write_ioctl': drivers/mtd/mtdchar.c:575:4: warning: passing argument 2 of 'access_ok' makes pointer from integer without a cast [enabled by default] arch/m68k/include/asm/uaccess_mm.h:17:90: note: expected 'const void *' but argument is of type '__u64' drivers/mtd/mtdchar.c:576:4: warning: passing argument 2 of 'access_ok' makes pointer from integer without a cast [enabled by default] arch/m68k/include/asm/uaccess_mm.h:17:90: note: expected 'const void *' but argument is of type '__u64' The address parameter of access_ok() is really a userspace pointer. On most architectures, access_ok() is a macro that casts the address parameter, hiding issues in its users. Move around and use the existing usr_data and usr_oob temporary variables to kill the warnings. Add a few "consts", and make more use of the temporaries while we're at it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
pekon gupta authored
fixes: commit 62116e51 mtd: nand: omap2: Support for hardware BCH error correction. In omap_elm_correct_data(), if bitflip_count in an erased-page is within the correctable limit (< ecc.strength), then it is not indicated back to the caller ecc->read_page(). This mis-guides upper layers like MTD and UBIFS layer to assume erased-page as perfectly clean and use it for writing even if actual bitflip_count was dangerously high (bitflip_count > mtd->bitflip_threshold). This patch fixes this above issue, by returning 'stats' to caller ecc->read_page() under all scenarios. Reported-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Pekon Gupta <pekon@ti.com> Cc: <stable@vger.kernel.org> # 3.9.x+ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 12 May, 2014 4 commits
-
-
Geert Uytterhoeven authored
Spansion s25sl032p supports Dual and Quad SPI transfers, hence set the SPI_NOR_DUAL_READ and SPI_NOR_QUAD_READ flags. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Geert Uytterhoeven authored
Commit 03e296f6 ("mtd: m25p80: use the SPI nor framework") accidentally removed support for Dual SPI read transfers. Add it back. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Wolfram Sang authored
Fixes: drivers/mtd/devices/elm.c:480:12: warning: 'elm_suspend' defined but not used [-Wunused-function] drivers/mtd/devices/elm.c:488:12: warning: 'elm_resume' defined but not used [-Wunused-function] Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Jean Delvare authored
Anyone working with an AMD Elan SC520 development or evaluation board would be building a dedicated kernel for it, so we can make the sc520cdp and netsc520 maps depend on MELAN. SC520_CPUFREQ already depends on MELAN so it makes things more consistent. It also makes kernel configuration for every other x86 user easier. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 09 May, 2014 1 commit
-
-
Brian Norris authored
The nand_chip::erase_cmd callback previously served a dual purpose; for one, it allowed a per-flash-chip override, so that AG-AND devices could use a different erase command than other NAND. These AND devices were dropped in commit 14c65786 (mtd: nand: remove AG-AND support). On the other hand, some drivers (denali and doc-g4) need to use this sort of callback to implement controller-specific erase operations. To make the latter operation easier for some drivers (e.g., ST's new BCH NAND driver), it helps if the command dispatch and wait functions can be lumped together, rather than called separately. This patch does two things: 1. Pull the call to chip->waitfunc() into chip->erase_cmd(), and return the status from this callback 2. Rename erase_cmd() to just erase(), since this callback does a little more than just send a command Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Lee Jones <lee.jones@linaro.org>
-
- 29 Apr, 2014 1 commit
-
-
Masahiro Yamada authored
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 18 Apr, 2014 1 commit
-
-
Akinobu Mita authored
mtd_oobtest writes OOB, read it back and verify. The verification is not correctly done if oobsize is not multiple of 4. Although the data to be written and the data to be compared are generated by several prandom_byte_state() calls starting with the same seed, these two are generated with the different size and different number of calls. Due to the implementation of prandom_byte_state() if the size on each call is not multiple of 4, the resulting data is not always same. This fixes it by just calling prandom_byte_state() once and using correct range instead of calling it multiple times for each. Reported-by: George Cherian <george.cherian@ti.com> Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Cc: George Cherian <george.cherian@ti.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 17 Apr, 2014 3 commits
-
-
Brian Norris authored
Addition of the spi-nor framework, plus updates to the ST SPI FSM driver.
-
Brian Norris authored
COMPILE_TEST allows us to build this driver on other arch'es. But not all arch'es have the right I/O accessors -- particularly, x86 is missing readsl() and writesl(). So just restrict this driver to ARCH_STI. It's still buildable for a multiplatform ARM kernel, so it can get decent compile coverage. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org>
-
Brian Norris authored
Compile-testing for a 64-bit arch uncovers several bad casts: In file included from include/linux/linkage.h:4:0, from include/linux/kernel.h:6, from drivers/mtd/devices/st_spi_fsm.c:15: drivers/mtd/devices/st_spi_fsm.c: In function ‘stfsm_read_fifo’: drivers/mtd/devices/st_spi_fsm.c:758:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] BUG_ON((((uint32_t)buf) & 0x3) || (size & 0x3)); ... Use uintptr_t instead of uint32_t, since it's guaranteed to be pointer-sized. We also see this warning, if size_t is not 32 bits wide: In file included from drivers/mtd/devices/st_spi_fsm.c:15:0: drivers/mtd/devices/st_spi_fsm.c: In function ‘stfsm_mtd_write’: include/linux/kernel.h:712:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&_min1 == &_min2); \ ^ drivers/mtd/devices/st_spi_fsm.c:1704:11: note: in expansion of macro ‘min’ bytes = min(FLASH_PAGESIZE - page_offs, len); ^ Just use min_t() to force the type conversion, since we don't really want to upgrade 'page_offs' and 'bytes' to size_t; they only should be handling <= 256 byte offsets. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org>
-
- 16 Apr, 2014 7 commits
-
-
Brian Norris authored
This corrects some sparse warnings: drivers/mtd/spi-nor/fsl-quadspi.c:281:31: warning: incorrect type in initializer (different address spaces) [sparse] drivers/mtd/spi-nor/fsl-quadspi.c:281:31: expected void *[noderef] <asn:2>base [sparse] drivers/mtd/spi-nor/fsl-quadspi.c:281:31: got void [noderef] <asn:2>*iobase [sparse] (etc.) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com>
-
Huang Shijie authored
More and more chips use the GPMI controller, but these chips may use different version of the IPs for GPMI and BCH. Different IPs have different features, such as the BCH's maximum ECC strength: imx23/imx28 -- the BCH's maximum ECC strength is 20 imx6q -- the BCH's maximum ECC strength is 40 imx6sx -- the BCH's maximum ECC strength is 62 This patch does the following things: [1] add a new data structure, gpmi_devdata{}, to store the information for each IP. Besides the IP version, we store the following information: <1> BCH's maximum ECC strength. <2> the maximum chain delay in ns used by the EDO mode. but we may add more information in future. [2] add the gpmi_devdata_imx{23|28|6q} to replace the gpmi_ids. [3] simplify the code by using the ECC strength from gpmi_devdata, such as gpmi_check_ecc() and legacy_set_geometry(); [4] use the maximum chain delay to initialize the EDO mode, see gpmi_compute_edo_timing(). [5] rewrite the macros, such GPMI_IS_MX{23|28|6Q}. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Raphaël Poggi authored
Add line feed to pr_err. Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Murali Karicheri authored
Sub page write doesn't work because of hw issue in controller found on Keystone SOCs. AEMIF controller is also used on DaVinci SOCs which don't seems to have any issue. So add "ti,keysone-nand" compatible to nand driver in order to set NAND_NO_SUBPAGE_WRITE option. Cc: Warner Losh <imp@bsdimp.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Roman Peniaev authored
mtd_blkdevs is device with volatile cache (writeback buffer), so it should support REQ_FLUSH to do explicit flush. Without this patch 'sync' does not guarantee that writeback buffer will be flushed on disk in case of power off, e.g.: $ cp some_file /mnt $ sync ### POWER OFF In case of this sequence writeback buffer will not be flushed on disk. This patch fixes this behaviour and explicitly reports to block layer that flush requests are being supported. Signed-off-by: Roman Peniaev <r.peniaev@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Ron authored
Now that the index variable is correctly set earlier in this function we can use it in other places that compute the same thing too. Signed-off-by: Ron Lee <ron@debian.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Christian Engelmayer authored
Commit 2c9f2365 (mtd: nand: omap: ecc.calculate: merge omap3_calculate_ecc_bch4 in omap_calculate_ecc_bch) introduced minor compile warning "‘erased_sector_bitflips’ defined but not used [-Wunused-function]" when compiling without CONFIG_MTD_NAND_OMAP_BCH. Move function erased_sector_bitflips() into the same ifdef section as the only caller. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 14 Apr, 2014 3 commits
-
-
Brian Norris authored
There's no reason this can't be a module. Also, give SPI-NOR its own submenu. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
-
Brian Norris authored
Many of the serial_flash_cmds.h opcodes are duplicated with spi-nor.h. Let's begin to unify them. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marek Vasut <marex@denx.de>
-
Brian Norris authored
Begin to unify the differences between serial_flash_cmds.h and spi-nor.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marek Vasut <marex@denx.de>
-