- 28 Jul, 2020 2 commits
-
-
Ard Biesheuvel authored
The CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 workaround addresses an issue which was fixed before the oldest supported binutils (2.23 at this time) were released. So we can remove it now. Acked-by:
Dave Martin <Dave.Martin@arm.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Ard Biesheuvel authored
Now that KVM support has been removed from the 32-bit ARM port, drop the export kimage_voffset symbol, which no longer has any users. Acked-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
- 22 Jul, 2020 1 commit
-
-
Russell King authored
Detail the success return condition, and that we rely on KERNEL_DS being zero for this to operate correctly. Signed-off-by:
-
- 21 Jul, 2020 7 commits
-
-
Mike Rapoport authored
The it8152 PCI host controller was only used by cm-x2xx platforms. Since these platforms were removed, there is no point to keep it8152 driver. Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
-
Nathan Huckleberry authored
Since clang does not push pc and sp in function prologues, the current implementation of unwind_frame does not work. By using the previous frame's lr/fp instead of saved pc/sp we get valid unwinds on clang-built kernels. The bounds check on next frame pointer must be changed as well since there are 8 less bytes between frames. This fixes /proc/<pid>/stack. Link: https://github.com/ClangBuiltLinux/linux/issues/912Reported-by:
Miles Chen <miles.chen@mediatek.com> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Signed-off-by:
-
Stefan Agner authored
The integrated assembler of Clang 10 and earlier do not allow to access the VFP registers through the coprocessor load/store instructions: arch/arm/vfp/vfpmodule.c:342:2: error: invalid operand for instruction fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_DEX|FPEXC_FP2V|FPEXC_VV|FPEXC_TRAP_MASK)); ^ arch/arm/vfp/vfpinstr.h:79:6: note: expanded from macro 'fmxr' asm("mcr p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr " #_vfp_ ", %0" ^ <inline asm>:1:6: note: instantiated into assembly here mcr p10, 7, r0, cr8, cr0, 0 @ fmxr FPEXC, r0 ^ This has been addressed with Clang 11 [0]. However, to support earlier versions of Clang and for better readability use of VFP assembler mnemonics still is preferred. Ideally we would replace this code with the unified assembler language mnemonics vmrs/vmsr on call sites along with .fpu assembler directives. The GNU assembler supports the .fpu directive at least since 2.17 (when documentation has been added). Since Linux requires binutils 2.21 it is safe to use .fpu directive. However, binutils does not allow to use FPINST or FPINST2 as an argument to vmrs/vmsr instructions up to binutils 2.24 (see binutils commit 16d02dc907c5): arch/arm/vfp/vfphw.S: Assembler messages: arch/arm/vfp/vfphw.S:162: Error: operand 0 must be FPSID or FPSCR pr FPEXC -- `vmsr FPINST,r6' arch/arm/vfp/vfphw.S:165: Error: operand 0 must be FPSID or FPSCR pr FPEXC -- `vmsr FPINST2,r8' arch/arm/vfp/vfphw.S:235: Error: operand 1 must be a VFP extension System Register -- `vmrs r3,FPINST' arch/arm/vfp/vfphw.S:238: Error: operand 1 must be a VFP extension System Register -- `vmrs r12,FPINST2' Use as-instr in Kconfig to check if FPINST/FPINST2 can be used. If they can be used make use of .fpu directives and UAL VFP mnemonics for register access. This allows to build vfpmodule.c with Clang and its integrated assembler. [0] https://reviews.llvm.org/D59733 Link: https://github.com/ClangBuiltLinux/linux/issues/905Signed-off-by:Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Stefan Agner authored
The integrated assembler of Clang 10 and earlier do not allow to access the VFP registers through the coprocessor load/store instructions: <instantiation>:4:6: error: invalid operand for instruction LDC p11, cr0, [r10],#32*4 @ FLDMIAD r10!, {d0-d15} ^ This has been addressed with Clang 11 [0]. However, to support earlier versions of Clang and for better readability use of VFP assembler mnemonics still is preferred. Replace the coprocessor load/store instructions with explicit assembler mnemonics to accessing the floating point coprocessor registers. Use assembler directives to select the appropriate FPU version. This allows to build these macros with GNU assembler as well as with Clang's built-in assembler. [0] https://reviews.llvm.org/D59733 Link: https://github.com/ClangBuiltLinux/linux/issues/905Signed-off-by: -
Stefan Agner authored
Explicit FPU selection has been introduced in commit 1a6be26d ("[ARM] Enable VFP to be built when non-VFP capable CPUs are selected") to make use of assembler mnemonics for VFP instructions. However, clang currently does not support passing assembler flags like this and errors out with: clang-10: error: the clang compiler does not support '-Wa,-mfpu=softvfp+vfp' Make use of the .fpu assembler directives to select the floating point hardware selectively. Also use the new unified assembler language mnemonics. This allows to build these procedures with Clang. Link: https://github.com/ClangBuiltLinux/linux/issues/762Signed-off-by:
-
Linus Walleij authored
The act_mm assembly macro is actually partly reimplementing get_thread_info so let's just use that. Suggested-by:
-
Masahiro Yamada authored
Use the standard obj-y form to specify the sub-directories under arch/arm/. No functional change intended. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
- 05 Jul, 2020 14 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Using a mutex for "print this warning only once" is so overdesigned as to be actively offensive to my sensitive stomach. Just use "pr_info_once()" that already does this, although in a (harmlessly) racy manner that can in theory cause the message to be printed twice if more than one CPU races on that "is this the first time" test. [ If somebody really cares about that harmless data race (which sounds very unlikely indeed), that person can trivially fix printk_once() by using a simple atomic access, preferably with an optimistic non-atomic test first before even bothering to treat the pointless "make sure it is _really_ just once" case. A mutex is most definitely never the right primitive to use for something like this. ] Yes, this is a small and meaningless detail in a code path that hardly matters. But let's keep some code quality standards here, and not accept outrageously bad code. Link: https://lore.kernel.org/lkml/CAHk-=wgV9toS7GU3KmNpj8hCS9SeF+A0voHS8F275_mgLhL4Lw@mail.gmail.com/ Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A series of fixes for x86: - Reset MXCSR in kernel_fpu_begin() to prevent using a stale user space value. - Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly whitelisted for split lock detection. Some CPUs which do not support it crash even when the MSR is written to 0 which is the default value. - Fix the XEN PV fallout of the entry code rework - Fix the 32bit fallout of the entry code rework - Add more selftests to ensure that these entry problems don't come back. - Disable 16 bit segments on XEN PV. It's not supported because XEN PV does not implement ESPFIX64" * tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ldt: Disable 16-bit segments on Xen PV x86/entry/32: Fix #MC and #DB wiring on x86_32 x86/entry/xen: Route #DB correctly on Xen PV x86/entry, selftests: Further improve user entry sanity checks x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER selftests/x86: Consolidate and fix get/set_eflags() helpers selftests/x86/syscall_nt: Clear weird flags after each test selftests/x86/syscall_nt: Add more flag combinations x86/entry/64/compat: Fix Xen PV SYSENTER frame setup x86/entry: Move SYSENTER's regs->sp and regs->flags fixups into C x86/entry: Assert that syscalls are on the right stack x86/split_lock: Don't write MSR_TEST_CTRL on CPUs that aren't whitelisted x86/fpu: Reset MXCSR to default in kernel_fpu_begin() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of interrupt chip driver fixes: - Ensure the atomicity of affinity updates in the GIC driver - Don't try to sleep in atomic context when waiting for the GICv4.1 to respond. Use polling instead. - Typo fixes in Kconfig and warnings" * tag 'irq-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic: Atomically update affinity irqchip/riscv-intc: Fix a typo in a pr_warn() irqchip/gic-v4.1: Use readx_poll_timeout_atomic() to fix sleep in atomic irqchip/loongson-pci-msi: Fix a typo in Kconfig -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull rcu fixlet from Thomas Gleixner: "A single fix for a printk format warning in RCU" * tag 'core-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcuperf: Fix printk format warning
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes frin Masahiro Yamada: - fix various bugs in xconfig - fix some issues in cross-compilation using Clang - fix documentation * tag 'kbuild-fixes-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: .gitignore: Do not track `defconfig` from `make savedefconfig` kbuild: make Clang build userprogs for target architecture kbuild: fix CONFIG_CC_CAN_LINK(_STATIC) for cross-compilation with Clang kconfig: qconf: parse newer types at debug info kconfig: qconf: navigate menus on hyperlinks kconfig: qconf: don't show goback button on splitMode kconfig: qconf: simplify the goBack() logic kconfig: qconf: re-implement setSelected() kconfig: qconf: make debug links work again kconfig: qconf: make search fully work again on split mode kconfig: qconf: cleanup includes docs: kbuild: fix ReST formatting gcc-plugins: fix gcc-plugins directory path in documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four small fixes in three drivers. The mptfusion one has actually caused user visible issues in certain kernel configurations" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mptfusion: Don't use GFP_ATOMIC for larger DMA allocations scsi: libfc: Skip additional kref updating work event scsi: libfc: Handling of extra kref scsi: qla2xxx: Fix a condition in qla2x00_find_all_fabric_devs()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe fixes from Christoph: - Fix crash in multi-path disk add (Christoph) - Fix ignore of identify error (Sagi) - Fix a compiler complaint that a function should be static (Wei) * tag 'block-5.8-2020-07-05' of git://git.kernel.dk/linux-block: block: make function __bio_integrity_free() static nvme: fix a crash in nvme_mpath_add_disk nvme: fix identify error status silent ignore -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Andres reported a regression with the fix that was merged earlier this week, where his setup of using signals to interrupt io_uring CQ waits no longer worked correctly. Fix this, and also limit our use of TWA_SIGNAL to the case where we need it, and continue using TWA_RESUME for task_work as before. Since the original is marked for 5.7 stable, let's flush this one out early" * tag 'io_uring-5.8-2020-07-05' of git://git.kernel.dk/linux-block: io_uring: fix regression with always ignoring signals in io_cqring_wait()
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "The usual driver fixes and documentation updates" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mlxcpld: check correct size of maximum RECV_LEN packet i2c: add Kconfig help text for slave mode i2c: slave-eeprom: update documentation i2c: eg20t: Load module automatically if ID matches i2c: designware: platdrv: Set class based on DMI i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - fix for missing hazard barrier - DT fix for ingenic - DT fix of GPHY names for lantiq - fix usage of smp_processor_id() while preemption is enabled * tag 'mips_fixes_5.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Do not use smp_processor_id() in preemptible code MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen MIPS: ingenic: gcw0: Fix HP detection GPIO. MIPS: lantiq: xway: sysctrl: fix the GPHY clock alias names
-
Xingxing Su authored
Use preempt_disable() to fix the following bug under CONFIG_DEBUG_PREEMPT. [ 21.915305] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-mip/1056 [ 21.923996] caller is do_ri+0x1d4/0x690 [ 21.927921] CPU: 0 PID: 1056 Comm: qemu-system-mip Not tainted 5.8.0-rc2 #3 [ 21.934913] Stack : 0000000000000001 ffffffff81370000 ffffffff8071cd60 a80f926d5ac95694 [ 21.942984] a80f926d5ac95694 0000000000000000 98000007f0043c88 ffffffff80f2fe40 [ 21.951054] 0000000000000000 0000000000000000 0000000000000001 0000000000000000 [ 21.959123] ffffffff802d60cc 98000007f0043dd8 ffffffff81f4b1e8 ffffffff81f60000 [ 21.967192] ffffffff81f60000 ffffffff80fe0000 ffff000000000000 0000000000000000 [ 21.975261] fffffffff500cce1 0000000000000001 0000000000000002 0000000000000000 [ 21.983331] ffffffff80fe1a40 0000000000000006 ffffffff8077f940 0000000000000000 [ 21.991401] ffffffff81460000 98000007f0040000 98000007f0043c80 000000fffba8cf20 [ 21.999471] ffffffff8071cd60 0000000000000000 0000000000000000 0000000000000000 [ 22.007541] 0000000000000000 0000000000000000 ffffffff80212ab4 a80f926d5ac95694 [ 22.015610] ... [ 22.018086] Call Trace: [ 22.020562] [<ffffffff80212ab4>] show_stack+0xa4/0x138 [ 22.025732] [<ffffffff8071cd60>] dump_stack+0xf0/0x150 [ 22.030903] [<ffffffff80c73f5c>] check_preemption_disabled+0xf4/0x100 [ 22.037375] [<ffffffff80213b84>] do_ri+0x1d4/0x690 [ 22.042198] [<ffffffff8020b828>] handle_ri_int+0x44/0x5c [ 24.359386] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-mip/1072 [ 24.368204] caller is do_ri+0x1a8/0x690 [ 24.372169] CPU: 4 PID: 1072 Comm: qemu-system-mip Not tainted 5.8.0-rc2 #3 [ 24.379170] Stack : 0000000000000001 ffffffff81370000 ffffffff8071cd60 a80f926d5ac95694 [ 24.387246] a80f926d5ac95694 0000000000000000 98001007ef06bc88 ffffffff80f2fe40 [ 24.395318] 0000000000000000 0000000000000000 0000000000000001 0000000000000000 [ 24.403389] ffffffff802d60cc 98001007ef06bdd8 ffffffff81f4b818 ffffffff81f60000 [ 24.411461] ffffffff81f60000 ffffffff80fe0000 ffff000000000000 0000000000000000 [ 24.419533] fffffffff500cce1 0000000000000001 0000000000000002 0000000000000000 [ 24.427603] ffffffff80fe0000 0000000000000006 ffffffff8077f940 0000000000000020 [ 24.435673] ffffffff81460020 98001007ef068000 98001007ef06bc80 000000fffbbbb370 [ 24.443745] ffffffff8071cd60 0000000000000000 0000000000000000 0000000000000000 [ 24.451816] 0000000000000000 0000000000000000 ffffffff80212ab4 a80f926d5ac95694 [ 24.459887] ... [ 24.462367] Call Trace: [ 24.464846] [<ffffffff80212ab4>] show_stack+0xa4/0x138 [ 24.470029] [<ffffffff8071cd60>] dump_stack+0xf0/0x150 [ 24.475208] [<ffffffff80c73f5c>] check_preemption_disabled+0xf4/0x100 [ 24.481682] [<ffffffff80213b58>] do_ri+0x1a8/0x690 [ 24.486509] [<ffffffff8020b828>] handle_ri_int+0x44/0x5c Signed-off-by:
Xingxing Su <suxingxing@loongson.cn> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Hauke Mehrtens authored
This resolves the hazard between the mtc0 in the change_c0_status() and the mfc0 in configure_exception_vector(). Without resolving this hazard configure_exception_vector() could read an old value and would restore this old value again. This would revert the changes change_c0_status() did. I checked this by printing out the read_c0_status() at the end of per_cpu_trap_init() and the ST0_MX is not set without this patch. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU. There the change_c0_status() function would activate the DSPen by setting ST0_MX in the c0_status register. This was reverted and then the system got a DSP exception when the DSP registers were saved in save_dsp() in the first process switch. The crash looks like this: [ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.107070] Kernel panic - not syncing: Unexpected DSP exception [ 0.113470] Rebooting in 1 seconds.. We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs, not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it did not happen. In the kernel I bisected this problem to commit 9012d011 ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was reverted it also happened after commit 172dcd93 ("MIPS: Always allocate exception vector for MIPSr2+"). Commit 0b24cae4 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") does similar changes to a different file. I am not sure if there are more places affected by this problem. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Paul Menzel authored
Running `make savedefconfig` creates by default `defconfig`, which is, currently, on git’s radar, for example, `git status` lists this file as untracked. So, add the file to `.gitignore`, so it’s ignored by git. Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
- 04 Jul, 2020 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "One fix for a regression in our pkey handling, which exhibits as PROT_EXEC mappings taking continuous page faults. Thanks to: Jan Stancek, Aneesh Kumar K.V" * tag 'powerpc-5.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm/pkeys: Make pkey access check work on execute_only_key
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Nothing earth-shattering, really - some CPU errata workarounds (one day they'll get it right, ha!) and a fix for a boot failure with very large kernel images where the alternative patching gets confused when patching relative branches using veneers. - Fix alternative patching for very large kernel images and modules - Hook up existing CPU errata workarounds for Qualcomm Kryo CPUs" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Add KRYO4XX silver CPU cores to erratum list 1530923 and 1024718 arm64: Add KRYO4XX gold CPU cores to erratum list 1463225 and 1418040 arm64: Add MIDR value for KRYO4XX gold CPU cores arm64/alternatives: use subsections for replacement sequences
-
Jens Axboe authored
When switching to TWA_SIGNAL for task_work notifications, we also made any signal based condition in io_cqring_wait() return -ERESTARTSYS. This breaks applications that rely on using signals to abort someone waiting for events. Check if we have a signal pending because of queued task_work, and repeat the signal check once we've run the task_work. This provides a reliable way of telling the two apart. Additionally, only use TWA_SIGNAL if we are using an eventfd. If not, we don't have the dependency situation described in the original commit, and we can get by with just using TWA_RESUME like we previously did. Fixes: ce593a6c ("io_uring: use signal based task_work running") Cc: stable@vger.kernel.org # v5.7 Reported-by:
Andres Freund <andres@anarazel.de> Tested-by:
Jens Axboe <axboe@kernel.dk>
-
Andy Lutomirski authored
Xen PV doesn't implement ESPFIX64, so they don't work right. Disable them. Also print a warning the first time anyone tries to use a 16-bit segment on a Xen PV guest that would otherwise allow it to help people diagnose this change in behavior. This gets us closer to having all x86 selftests pass on Xen PV. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/92b2975459dfe5929ecf34c3896ad920bd9e3f2d.1593795633.git.luto@kernel.org
-
Andy Lutomirski authored
DEFINE_IDTENTRY_MCE and DEFINE_IDTENTRY_DEBUG were wired up as non-RAW on x86_32, but the code expected them to be RAW. Get rid of all the macro indirection for them on 32-bit and just use DECLARE_IDTENTRY_RAW and DEFINE_IDTENTRY_RAW directly. Also add a warning to make sure that we only hit the _kernel paths in kernel mode. Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
-
Andy Lutomirski authored
On Xen PV, #DB doesn't use IST. It still needs to be correctly routed depending on whether it came from user or kernel mode. Get rid of DECLARE/DEFINE_IDTENTRY_XEN -- it was too hard to follow the logic. Instead, route #DB and NMI through DECLARE/DEFINE_IDTENTRY_RAW on Xen, and do the right thing for #DB. Also add more warnings to the exc_debug* handlers to make this type of failure more obvious. This fixes various forms of corruption that happen when usermode triggers #DB on Xen PV. Fixes: 4c0dcd83 ("x86/entry: Implement user mode C entry points for #DB and #MCE") Signed-off-by:
-
Andy Lutomirski authored
Chasing down a Xen bug caused me to realize that the new entry sanity checks are still fairly weak. Add some more checks. Signed-off-by:
-
Andy Lutomirski authored
Move the clearing of the high bits of RAX after Xen PV joins the SYSENTER path so that Xen PV doesn't skip it. Arguably this code should be deleted instead, but that would belong in the merge window. Fixes: ffae641f ("x86/entry/64/compat: Fix Xen PV SYSENTER frame setup") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "One small cleanup patch for ARM and two patches for the xenbus driver fixing latent problems (large stack allocations and bad return code settings)" * tag 'for-linus-5.8b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: let xenbus_map_ring_valloc() return errno values only xen/xenbus: avoid large structs and arrays on the stack arm/xen: remove the unused macro GRANT_TABLE_PHYSADDR
-
Wolfram Sang authored
I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the SMBus 2.0 specs. I don't see a reason to add 1 here. Also, fix the errno to what is suggested for this error. Fixes: c9bfdc7c ("i2c: mlxcpld: Add support for smbus block read transaction") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Michael Shych <michaelsh@mellanox.com> Tested-by:
Wolfram Sang <wsa@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull sysctl fix from Al Viro: "Another regression fix for sysctl changes this cycle..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Call sysctl_head_finish on error
-
Wolfram Sang authored
I can't recall why there was none, but we surely want to have it. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Wolfram Sang authored
Add more details which have either been missing ever since or describe recent additions. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Andy Shevchenko authored
The driver can't be loaded automatically because it misses module alias to be provided. Add corresponding MODULE_DEVICE_TABLE() call to the driver. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Ricardo Ribalda authored
Current AMD's zen-based APUs use this core for some of its i2c-buses. With this patch we re-enable autodetection of hwmon-alike devices, so lm-sensors will be able to work automatically. It does not affect the boot-time of embedded devices, as the class is set based on the DMI information. DMI is probed only on Qtechnology QT5222 Industrial Camera Platform. DocLink: https://qtec.com/camera-technology-camera-platforms/ Fixes: 3eddad96 ("i2c: designware: reverts "i2c: designware: Add support for AMD I2C controller"") Signed-off-by:
Ricardo Ribalda <ribalda@kernel.org> Reviewed-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
-
Chris Packham authored
The PCA9665 datasheet says that I2CSTA = 78h indicates that SCL is stuck low, this differs to the PCA9564 which uses 90h for this indication. Treat either 0x78 or 0x90 as an indication that the SCL line is stuck. Based on looking through the PCA9564 and PCA9665 datasheets this should be safe for both chips. The PCA9564 should not return 0x78 for any valid state and the PCA9665 should not return 0x90. Fixes: eff9ec95 ("i2c-algo-pca: Add PCA9665 support") Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
-
