- 14 Sep, 2020 11 commits
-
-
Xin Long authored
As we can see from vxlan_build/parse_gbp_hdr(), when processing metadata on vxlan rx/tx path, only dont_learn/policy_applied/policy_id fields can be set to or parse from the packet for vxlan gbp option. So do the mask when set it in lwtunnel, as it does in act_tunnel_key and cls_flower. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
As we can see from vxlan_build/parse_gbp_hdr(), when processing metadata on vxlan rx/tx path, only dont_learn/policy_applied/policy_id fields can be set to or parse from the packet for vxlan gbp option. So we'd better do the mask when set it in act_tunnel_key and cls_flower. Otherwise, when users don't know these bits, they may configure with a value which can never be matched. Reported-by:
Shuang Li <shuali@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
In tipc_buf_append() it may change skb's frag_list, and it causes problems when this skb is cloned. skb_unclone() doesn't really make this skb's flag_list available to change. Shuang Li has reported an use-after-free issue because of this when creating quite a few macvlan dev over the same dev, where the broadcast packets will be cloned and go up to the stack: [ ] BUG: KASAN: use-after-free in pskb_expand_head+0x86d/0xea0 [ ] Call Trace: [ ] dump_stack+0x7c/0xb0 [ ] print_address_description.constprop.7+0x1a/0x220 [ ] kasan_report.cold.10+0x37/0x7c [ ] check_memory_region+0x183/0x1e0 [ ] pskb_expand_head+0x86d/0xea0 [ ] process_backlog+0x1df/0x660 [ ] net_rx_action+0x3b4/0xc90 [ ] [ ] Allocated by task 1786: [ ] kmem_cache_alloc+0xbf/0x220 [ ] skb_clone+0x10a/0x300 [ ] macvlan_broadcast+0x2f6/0x590 [macvlan] [ ] macvlan_process_broadcast+0x37c/0x516 [macvlan] [ ] process_one_work+0x66a/0x1060 [ ] worker_thread+0x87/0xb10 [ ] [ ] Freed by task 3253: [ ] kmem_cache_free+0x82/0x2a0 [ ] skb_release_data+0x2c3/0x6e0 [ ] kfree_skb+0x78/0x1d0 [ ] tipc_recvmsg+0x3be/0xa40 [tipc] So fix it by using skb_unshare() instead, which would create a new skb for the cloned frag and it'll be safe to change its frag_list. The similar things were also done in sctp_make_reassembled_event(), which is using skb_copy(). Reported-by:
Shuang Li <shuali@redhat.com> Fixes: 37e22164 ("tipc: rename and move message reassembly function") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peilin Ye authored
tipc_group_add_to_tree() returns silently if `key` matches `nkey` of an existing node, causing tipc_group_create_member() to leak memory. Let tipc_group_add_to_tree() return an error in such a case, so that tipc_group_create_member() can handle it properly. Fixes: 75da2163 ("tipc: introduce communication groups") Reported-and-tested-by: syzbot+f95d90c454864b3b5bc9@syzkaller.appspotmail.com Cc: Hillf Danton <hdanton@sina.com> Link: https://syzkaller.appspot.com/bug?id=048390604fe1b60df34150265479202f10e13affSigned-off-by:
Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
flowi4_multipath_hash was added by the commit referenced below for tunnels. Unfortunately, the patch did not initialize the new field for several fast path lookups that do not initialize the entire flow struct to 0. Fix those locations. Currently, flowi4_multipath_hash is random garbage and affects the hash value computed by fib_multipath_hash for multipath selection. Fixes: 24ba1440 ("route: Add multipath_hash in flowi_common to make user-define hash") Signed-off-by:
David Ahern <dsahern@gmail.com> Cc: wenxu <wenxu@ucloud.cn> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hauke Mehrtens says: ==================== net: lantiq: Fix bugs in NAPI handling This fixes multiple bugs in the NAPI handling. Changes since: v1: - removed stable tag from "net: lantiq: use netif_tx_napi_add() for TX NAPI" - Check the NAPI budged in "net: lantiq: Use napi_complete_done()" - Add extra fix "net: lantiq: Disable IRQs only if NAPI gets scheduled" ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
The napi_schedule() call will only schedule the NAPI if it is not already running. To make sure that we do not deactivate interrupts without scheduling NAPI only deactivate the interrupts in case NAPI also gets scheduled. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
Use napi_complete_done() and activate the interrupts when this function returns true. This way the generic NAPI code can take care of activating the interrupts. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
netif_tx_napi_add() should be used for NAPI in the TX direction instead of the netif_napi_add() function. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
The call to netif_wake_queue() when the TX descriptors were freed was missing. When there are no TX buffers available the TX queue will be stopped, but it was not started again when they are available again, this is fixed in this patch. Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Olympia Giannou authored
Some WinCE devices face connectivity issues via the NDIS interface. They fail to register, resulting in -110 timeout errors and failures during the probe procedure. In this kind of WinCE devices, the Windows-side ndis driver needs quite more time to be loaded and configured, so that the linux rndis host queries to them fail to be responded correctly on time. More specifically, when INIT is called on the WinCE side - no other requests can be served by the Client and this results in a failed QUERY afterwards. The increase of the waiting time on the side of the linux rndis host in the command-response loop leaves the INIT process to complete and respond to a QUERY, which comes afterwards. The WinCE devices with this special "feature" in their ndis driver are satisfied by this fix. Signed-off-by:
Olympia Giannou <olympia.giannou@leica-geosystems.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 12 Sep, 2020 5 commits
-
-
Grygorii Strashko authored
Add missed suspend/resume callbacks to properly restore networking after suspend/resume cycle. Fixes: ed3525ed ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vadym Kochan authored
Looks like u32p_replace_bits() should be used instead of u32_replace_bits() which does not modifies the value but returns the modified version. Fixes: 2b9feef2 ("soc: qcom: ipa: filter and routing tables") Signed-off-by:
Vadym Kochan <vadym.kochan@plvision.eu> Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Luo bin authored
When calling hinic_close in hinic_set_channels, all queues are stopped after netif_tx_disable, but some queue may be rewaken in free_tx_poll by mistake while drv is handling tx irq. If one queue is rewaken core may call hinic_xmit_frame to send pkt after netif_tx_disable within a short time which may results in accessing memory that has been already freed in hinic_close. So we call napi_disable before netif_tx_disable in hinic_close to fix this bug. Fixes: 2eed5a8b ("hinic: add set_channels ethtool_ops support") Signed-off-by:
Luo bin <luobin9@huawei.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vinicius Costa Gomes authored
It's possible that the user specifies an interval that couldn't allow any packet to be transmitted. This also avoids the issue of the hrtimer handler starving the other threads because it's running too often. The solution is to reject interval sizes that according to the current link speed wouldn't allow any packet to be transmitted. Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com Fixes: 5a781ccb ("tc: Add support for configuring the taprio scheduler") Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-09-09 This series contains updates to i40e and igc drivers. Stefan Assmann changes num_vlans to u16 to fix may be used uninitialized error and propagates error in i40_set_vsi_promisc() for i40e. Vinicius corrects timestamping latency values for i225 devices and accounts for TX timestamping delay for igc. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 11 Sep, 2020 1 commit
-
-
Claudiu Manoil authored
This is the correct resolution for the conflict from merging the "net" tree fix: commit 26cb7085 ("enetc: Remove the mdio bus on PF probe bailout") with the "net-next" new work: commit 07095c02 ("net: enetc: Use DT protocol information to set up the ports") that moved mdio bus allocation to an ealier stage of the PF probing routine. Fixes: a57066b1 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 10 Sep, 2020 22 commits
-
-
Lucy Yan authored
Increase Rx ring size to address issue where hardware is reaching the receive work limit. Before: [ 102.223342] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.245695] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.251387] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.267444] de2104x 0000:17:00.0 eth0: rx work limit reached Signed-off-by:
Lucy Yan <lucyyan@google.com> Reviewed-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
There is no @validate argument. CC: Johannes Berg <johannes.berg@intel.com> Fixes: 3de64403 ("netlink: re-add parse/validate functions in strict mode") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
The parameter passed via DCB_ATTR_DCB_BUFFER is a struct dcbnl_buffer. The field prio2buffer is an array of IEEE_8021Q_MAX_PRIORITIES bytes, where each value is a number of a buffer to direct that priority's traffic to. That value is however never validated to lie within the bounds set by DCBX_MAX_BUFFERS. The only driver that currently implements the callback is mlx5 (maintainers CCd), and that does not do any validation either, in particual allowing incorrect configuration if the prio2buffer value does not fit into 4 bits. Instead of offloading the need to validate the buffer index to drivers, do it right there in core, and bounce the request if the value is too large. CC: Parav Pandit <parav@nvidia.com> CC: Saeed Mahameed <saeedm@nvidia.com> Fixes: e549f6f9 ("net/dcb: Add dcbnl buffer attribute") Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== net: Fix bridge enslavement failure Patch #1 fixes an issue in which an upper netdev cannot be enslaved to a bridge when it has multiple netdevs with different parent identifiers beneath it. Patch #2 adds a test case using two netdevsim instances. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Test that an upper device of netdevs with different parent IDs can be enslaved to a bridge. The test fails without previous commit. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When a netdev is enslaved to a bridge, its parent identifier is queried. This is done so that packets that were already forwarded in hardware will not be forwarded again by the bridge device between netdevs belonging to the same hardware instance. The operation fails when the netdev is an upper of netdevs with different parent identifiers. Instead of failing the enslavement, have dev_get_port_parent_id() return '-EOPNOTSUPP' which will signal the bridge to skip the query operation. Other callers of the function are not affected by this change. Fixes: 7e1146e8 ("net: devlink: introduce devlink_compat_switch_id_get() helper") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reported-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Release first buffer as last one since it contains references to subsequent fragments. This code will be optimized introducing multi-buffer bit in xdp_buff structure. Fixes: ca0e0146 ("net: mvneta: move skb build after descriptors processing") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Wait until the QDIO data connection is severed. Otherwise the device might still be processing the buffers, and end up accessing skb data that we already freed. Fixes: 8b5026bc ("s390/qeth: fix qdio teardown after early init error") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Miaohe Lin authored
Remove the weird space inside the NETIF_F_CSUM_MASK. Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Miaohe Lin authored
Since commit 8d7017fd ("blackhole_netdev: use blackhole_netdev to invalidate dst entries"), we use blackhole_netdev to invalidate dst entries instead of loopback device anymore. Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
There are a couple bugs here: 1) If opt[1] is zero then this results in a forever loop. If the value is less than 2 then it is invalid. 2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can result in memory corruption. In the case of LCP_OPTION_ACCM, then we should check "opt[1]" instead of "len" because, if "opt[1]" is less than sizeof(valid_accm) then "nak_len" gets out of sync and it can lead to memory corruption in the next iterations through the loop. In case of LCP_OPTION_MAGIC, the only valid value for opt[1] is 6, but the code is trying to log invalid data so we should only discard the data when "len" is less than 6 because that leads to a read overflow. Reported-by:
ChenNan Of Chaitin Security Research Lab <whutchennan@gmail.com> Fixes: e022c2f0 ("WAN: new synchronous PPP implementation for generic HDLC.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yoshihiro Shimoda authored
Since the micrel phy driver calls phy_init_hw() as a workaround, the commit 9886a4db ("net: phy: call phy_disable_interrupts() in phy_init_hw()") disables the interrupt unexpectedly. So, call phy_disable_interrupts() in phy_attach_direct() instead. Otherwise, the phy cannot link up after the ethernet cable was disconnected. Note that other drivers (like at803x.c) also calls phy_init_hw(). So, perhaps, the driver caused a similar issue too. Fixes: 9886a4db ("net: phy: call phy_disable_interrupts() in phy_init_hw()") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dexuan Cui authored
The previous change "hv_netvsc: Switch the data path at the right time during hibernation" adds the call of netvsc_vf_changed() upon NETDEV_CHANGE, so it's necessary to avoid the duplicate call and message when the VF is brought UP or DOWN. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dexuan Cui authored
When netvsc_resume() is called, the mlx5 VF NIC has not been resumed yet, so in the future the host might sliently fail the call netvsc_vf_changed() -> netvsc_switch_datapath() there, even if the call works now. Call netvsc_vf_changed() in the NETDEV_CHANGE event handler: at that time the mlx5 VF NIC has been resumed. Fixes: 19162fd4 ("hv_netvsc: Fix hibernation for mlx5 VF driver") Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
Currently there is concurrent reset and enqueue operation for the same lockless qdisc when there is no lock to synchronize the q->enqueue() in __dev_xmit_skb() with the qdisc reset operation in qdisc_deactivate() called by dev_deactivate_queue(), which may cause out-of-bounds access for priv->ring[] in hns3 driver if user has requested a smaller queue num when __dev_xmit_skb() still enqueue a skb with a larger queue_mapping after the corresponding qdisc is reset, and call hns3_nic_net_xmit() with that skb later. Reused the existing synchronize_net() in dev_deactivate_many() to make sure skb with larger queue_mapping enqueued to old qdisc(which is saved in dev_queue->qdisc_sleeping) will always be reset when dev_reset_queue() is called. Fixes: 6b3ba914 ("net: sched: allow qdiscs to handle locking") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Helmut Grohne authored
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode property should be specified on port nodes. However, the microchip drivers read it from the switch node. Let the driver use the per-port property and fall back to the old location with a warning. Fix in-tree users. Signed-off-by:
Helmut Grohne <helmut.grohne@intenta.de> Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/Acked-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
mptcp_pm_nl_get_local_id may be called in interrupt context, so we need to use GFP_ATOMIC flag to allocate memory to avoid sleeping in atomic context. [ 280.209809] BUG: sleeping function called from invalid context at mm/slab.h:498 [ 280.209812] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1680, name: kworker/1:3 [ 280.209814] INFO: lockdep is turned off. [ 280.209816] CPU: 1 PID: 1680 Comm: kworker/1:3 Tainted: G W 5.9.0-rc3-mptcp+ #146 [ 280.209818] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 280.209820] Workqueue: events mptcp_worker [ 280.209822] Call Trace: [ 280.209824] <IRQ> [ 280.209826] dump_stack+0x77/0xa0 [ 280.209829] ___might_sleep.cold+0xa6/0xb6 [ 280.209832] kmem_cache_alloc_trace+0x1d1/0x290 [ 280.209835] mptcp_pm_nl_get_local_id+0x23c/0x410 [ 280.209840] subflow_init_req+0x1e9/0x2ea [ 280.209843] ? inet_reqsk_alloc+0x1c/0x120 [ 280.209845] ? kmem_cache_alloc+0x264/0x290 [ 280.209849] tcp_conn_request+0x303/0xae0 [ 280.209854] ? printk+0x53/0x6a [ 280.209857] ? tcp_rcv_state_process+0x28f/0x1374 [ 280.209859] tcp_rcv_state_process+0x28f/0x1374 [ 280.209864] ? tcp_v4_do_rcv+0xb3/0x1f0 [ 280.209866] tcp_v4_do_rcv+0xb3/0x1f0 [ 280.209869] tcp_v4_rcv+0xed6/0xfa0 [ 280.209873] ip_protocol_deliver_rcu+0x28/0x270 [ 280.209875] ip_local_deliver_finish+0x89/0x120 [ 280.209877] ip_local_deliver+0x180/0x220 [ 280.209881] ip_rcv+0x166/0x210 [ 280.209885] __netif_receive_skb_one_core+0x82/0x90 [ 280.209888] process_backlog+0xd6/0x230 [ 280.209891] net_rx_action+0x13a/0x410 [ 280.209895] __do_softirq+0xcf/0x468 [ 280.209899] asm_call_on_stack+0x12/0x20 [ 280.209901] </IRQ> [ 280.209903] ? ip_finish_output2+0x240/0x9a0 [ 280.209906] do_softirq_own_stack+0x4d/0x60 [ 280.209908] do_softirq.part.0+0x2b/0x60 [ 280.209911] __local_bh_enable_ip+0x9a/0xa0 [ 280.209913] ip_finish_output2+0x264/0x9a0 [ 280.209916] ? rcu_read_lock_held+0x4d/0x60 [ 280.209920] ? ip_output+0x7a/0x250 [ 280.209922] ip_output+0x7a/0x250 [ 280.209925] ? __ip_finish_output+0x330/0x330 [ 280.209928] __ip_queue_xmit+0x1dc/0x5a0 [ 280.209931] __tcp_transmit_skb+0xa0f/0xc70 [ 280.209937] tcp_connect+0xb03/0xff0 [ 280.209939] ? lockdep_hardirqs_on_prepare+0xe7/0x190 [ 280.209942] ? ktime_get_with_offset+0x125/0x150 [ 280.209944] ? trace_hardirqs_on+0x1c/0xe0 [ 280.209948] tcp_v4_connect+0x449/0x550 [ 280.209953] __inet_stream_connect+0xbb/0x320 [ 280.209955] ? mark_held_locks+0x49/0x70 [ 280.209958] ? lockdep_hardirqs_on_prepare+0xe7/0x190 [ 280.209960] ? __local_bh_enable_ip+0x6b/0xa0 [ 280.209963] inet_stream_connect+0x32/0x50 [ 280.209966] __mptcp_subflow_connect+0x1fd/0x242 [ 280.209972] mptcp_pm_create_subflow_or_signal_addr+0x2db/0x600 [ 280.209975] mptcp_worker+0x543/0x7a0 [ 280.209980] process_one_work+0x26d/0x5b0 [ 280.209984] ? process_one_work+0x5b0/0x5b0 [ 280.209987] worker_thread+0x48/0x3d0 [ 280.209990] ? process_one_work+0x5b0/0x5b0 [ 280.209993] kthread+0x117/0x150 [ 280.209996] ? kthread_park+0x80/0x80 [ 280.209998] ret_from_fork+0x22/0x30 Fixes: 01cacb00 ("mptcp: add netlink-based PM") Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Geliang Tang says: ==================== mptcp: fix subflow's local_id/remote_id issues v2: - add Fixes tags; - simply with 'return addresses_equal'; - use 'reversed Xmas tree' way. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
This patch set the init remote_id to zero, otherwise it will be a random number. Then it added the missing subflow's remote_id setting code both in __mptcp_subflow_connect and in subflow_ulp_clone. Fixes: 01cacb00 ("mptcp: add netlink-based PM") Fixes: ec3edaa7 ("mptcp: Add handling of outgoing MP_JOIN requests") Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
In mptcp_pm_nl_get_local_id, skc_local is the same as msk_local, so it always return 0. Thus every subflow's local_id is 0. It's incorrect. This patch fixed this issue. Also, we need to ignore the zero address here, like 0.0.0.0 in IPv4. When we use the zero address as a local address, it means that we can use any one of the local addresses. The zero address is not a new address, we don't need to add it to PM, so this patch added a new function address_zero to check whether an address is the zero address, if it is, we ignore this address. Fixes: 01cacb00 ("mptcp: add netlink-based PM") Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tetsuo Handa authored
I confirmed that the problem fixed by commit 2a63866c ("tipc: fix shutdown() of connectionless socket") also applies to stream socket. ---------- #include <sys/socket.h> #include <unistd.h> #include <sys/wait.h> int main(int argc, char *argv[]) { int fds[2] = { -1, -1 }; socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds); if (fork() == 0) _exit(read(fds[0], NULL, 1)); shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */ wait(NULL); /* To be woken up by _exit(). */ return 0; } ---------- Since shutdown(SHUT_RDWR) should affect all processes sharing that socket, unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right behavior. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Evgeniy does not have the time nor capacity to maintain the connector subsystem any longer, so just move it under networking as that is effectively what has been happening lately. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 09 Sep, 2020 1 commit
-
-
Vinicius Costa Gomes authored
When timestamping a packet there's a delay between the start of the packet and the point where the hardware actually captures the timestamp. This difference needs to be considered if we want accurate timestamps. This was done on the RX side, but not on the TX side. Fixes: 2c344ae2 ("igc: Add support for TX timestamping") Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-