- 17 May, 2016 1 commit
-
-
Linus Torvalds authored
Alex Thorlton reported that the SGI/UV code crashes in the efi_call() code when invoked with 7 parameters, due to: mov (%rsp), %rax mov 8(%rax), %rax ... mov %rax, 40(%rsp) Offset 8 is only true if CONFIG_FRAME_POINTERS is disabled, with frame pointers enabled it should be 16. Furthermore, the SAVE_XMM code saves the old stack pointer, but that's just crazy. It saves the stack pointer *AFTER* we've done the: FRAME_BEGIN ... which will have *changed* the stack pointer, depending on whether stack frames are enabled or not. So when the code then does: mov (%rsp), %rax ... we now move that old stack pointer into %rax, but the offset off that stack pointer will depend on whether that FRAME_BEGIN saved off %rbp or not. So that whole 8-vs-16 offset confusion depends on the frame pointer! If frame pointers were enabled, it will be 16. If they weren't, it will be 8. The right fix is to just get rid of that silly conditional frame pointer thing, and always use frame pointers in this stub function. And then we don't need that (odd) load to get the old stack pointer into %rax - we can just use the frame pointer. Reported-by: Alex Thorlton <athorlton@sgi.com> Tested-by: Alex Thorlton <athorlton@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/CA%2B55aFzBS2v%3DWnEH83cUDg7XkOremFqJ30BJwF40dCYjReBkUQ@mail.gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
- 16 May, 2016 1 commit
-
-
Dave Hansen authored
When I added support for the Memory Protection Keys processor feature, I had to reindent the REQUIRED/DISABLED_MASK macros, and also consult the later cpufeature words. I'm not quite sure how I bungled it, but I consulted the wrong word at the end. This only affected required or disabled cpu features in cpufeature words 14, 15 and 16. So, only Protection Keys itself was screwed over here. The result was that if you disabled pkeys in your .config, you might still see some code show up that should have been compiled out. There should be no functional problems, though. In verifying this patch I also realized that the DISABLE_PKU/OSPKE macros were defined backwards and that the cpu_has() check in setup_pku() was not doing the compile-time disabled checks. So also fix the macro for DISABLE_PKU/OSPKE and add a compile-time check for pkeys being enabled in setup_pku(). Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Dave Hansen <dave@sr71.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: dfb4a70f ("x86/cpufeature, x86/mm/pkeys: Add protection keys related CPUID definitions") Link: http://lkml.kernel.org/r/20160513221328.C200930B@viggo.jf.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
- 12 May, 2016 2 commits
-
-
Jeremy Compostella authored
Intel Cherrytrail is based on Airmont core so MSR_FSB_FREQ[2:0] = 4 means that the CPU reference clock runs at 80MHz. Add this missing frequency to the table. Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Link: http://lkml.kernel.org/r/87y47gty89.fsf@intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Dmitry V. Levin authored
Similar to preadv and pwritev, preadv2 and pwritev2 need compat entries in the 32-bit syscall table. This bug was found by strace test suite. Fixes: 4babf2c5 ("x86: wire up preadv2 and pwritev2") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20160511084817.GA29823@altlinux.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
- 11 May, 2016 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a couple of small fixes: one is a potential uninitialised error variable in the alua code, potentially causing spurious failures and the other is a problem caused by the conversion of SCSI to hostwide tags which resulted in the qla1280 driver always failing in host initialisation" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: qla1280: Don't allocate 512kb of host tags scsi_dh_alua: uninitialized variable in alua_rtpg()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Hopefully the last round of fixes this release, fingers crossed :) 1) Initialize static nf_conntrack_locks_all_lock properly, from Florian Westphal. 2) Need to cancel pending work when destroying IDLETIMER entries, from Liping Zhang. 3) Fix TX param usage when sending TSO over iwlwifi devices, from Emmanuel Grumbach. 4) NFACCT quota params not validated properly, from Phil Turnbull. 5) Resolve more glibc vs. kernel header conflicts, from Mikko Tapeli. 6) Missing IRQ free in ravb_close(), from Geert Uytterhoeven. 7) Fix infoleak in x25, from Kangjie Lu. 8) Similarly in thunderx driver, from Heinrich Schuchardt. 9) tc_ife.h uapi header not exported properly, from Jamal Hadi Salim. 10) Don't reenable PHY interreupts if device is in polling mode, from Shaohui Xie. 11) Packet scheduler actions late binding was not being handled properly at all, from Jamal Hadi Salim. 12) Fix binding of conntrack entries to helpers in openvswitch, from Joe Stringer" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) gre: do not keep the GRE header around in collect medata mode openvswitch: Fix cached ct with helper. net sched: ife action fix late binding net sched: skbedit action fix late binding net sched: simple action fix late binding net sched: mirred action fix late binding net sched: ipt action fix late binding net sched: vlan action fix late binding net: phylib: fix interrupts re-enablement in phy_start tcp: refresh skb timestamp at retransmit time net: nps_enet: bug fix - handle lost tx interrupts net: nps_enet: Tx handler synchronization export tc ife uapi header net: thunderx: avoid exposing kernel stack net: fix a kernel infoleak in x25 module ravb: Add missing free_irq() call to ravb_close() uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h netfilter: nfnetlink_acct: validate NFACCT_QUOTA parameter iwlwifi: mvm: don't override the rate with the AMSDU len netfilter: IDLETIMER: fix race condition when destroy the target ...
-
Jiri Benc authored
For ipgre interface in collect metadata mode, it doesn't make sense for the interface to be of ARPHRD_IPGRE type. The outer header of received packets is not needed, as all the information from it is present in metadata_dst. We already don't set ipgre_header_ops for collect metadata interfaces, which is the only consumer of mac_header pointing to the outer IP header. Just set the interface type to ARPHRD_NONE in collect metadata mode for ipgre (not gretap, that still correctly stays ARPHRD_ETHER) and reset mac_header. Fixes: a64b04d8 ("gre: do not assign header_ops in collect metadata mode") Fixes: 2e15ea39 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Stringer authored
When using conntrack helpers from OVS, a common configuration is to perform a lookup without specifying a helper, then go through a firewalling policy, only to decide to attach a helper afterwards. In this case, the initial lookup will cause a ct entry to be attached to the skb, then the later commit with helper should attach the helper and confirm the connection. However, the helper attachment has been missing. If the user has enabled automatic helper attachment, then this issue will be masked as it will be applied in init_conntrack(). It is also masked if the action is executed from ovs_packet_cmd_execute() as that will construct a fresh skb. This patch fixes the issue by making an explicit call to try to assign the helper if there is a discrepancy between the action's helper and the current skb->nfct. Fixes: cae3a262 ("openvswitch: Allow attaching helpers to ct action") Signed-off-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mathias Krause authored
The x86 exception table sorting was changed in commit 29934b0f ("x86/extable: use generic search and sort routines") to use the arch independent code in lib/extable.c. However, the patch was mangled somehow on its way into the kernel from the last version posted at [1]. The committed version kind of attempted to incorporate the changes of commit 548acf19 ("x86/mm: Expand the exception table logic to allow new handling options") as in _completely_ _ignoring_ the x86 specific 'handler' member of struct exception_table_entry. This effectively broke the sorting as entries will only partly be swapped now. Fortunately, the x86 Kconfig selects BUILDTIME_EXTABLE_SORT, so the exception table doesn't need to be sorted at runtime. However, in case that ever changes, we better not break the exception table sorting just because of that. [ Ard Biesheuvel points out that BUILDTIME_EXTABLE_SORT applies to the core image only, but we still rely on the sorting routines for modules in that case - Linus ] Fix this by providing a swap_ex_entry_fixup() macro that takes care of the 'handler' member. [1] https://lkml.org/lkml/2016/1/27/232Signed-off-by: Mathias Krause <minipli@googlemail.com> Fixes: 29934b0f ("x86/extable: use generic search and sort routines") Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A bunch of small driver specific fixes that have come up, none of them remarkable in themselves. One fixes a regression introduced in the merge window and another two are targetted at stable" * tag 'spi-fix-v4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: pxa2xx: Do not detect number of enabled chip selects on Intel SPT spi: spi-ti-qspi: Handle truncated frames properly spi: spi-ti-qspi: Fix FLEN and WLEN settings if bits_per_word is overridden spi: omap2-mcspi: Undo broken fix for dma transfer of vmalloced buffer spi: spi-fsl-dspi: Fix cs_change handling in message transfer
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Two small x86 patches, improving "make kvmconfig" and fixing an objtool warning for CONFIG_PROFILE_ALL_BRANCHES" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvmconfig: add more virtio drivers x86/kvm: Add stack frame dependency to fastop() inline asm
-
David S. Miller authored
Jamal Hadi Salim says: ==================== Some actions were broken in allowing for late binding of actions. Late binding workflow is as follows: a) create an action and provide all necessary parameters for it Optionally provide an index or let the kernel give you one. Example: sudo tc actions add action police rate 1kbit burst 90k drop index 1 b) later on bind to the pre-created action from a filter definition by merely specifying the index. Example: sudo tc filter add dev lo parent ffff: protocol ip prio 8 \ u32 match ip src 127.0.0.8/32 flowid 1:8 action police index 1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
The process below was broken and is fixed with this patch. //add an ife action and give it an instance id of 1 sudo tc actions add action ife encode \ type 0xDEAD allow mark dst 02:15:15:15:15:15 index 1 //create a filter which binds to ife action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:11 action ife index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
The process below was broken and is fixed with this patch. //add a skbedit action and give it an instance id of 1 sudo tc actions add action skbedit mark 10 index 1 //create a filter which binds to skbedit action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action skbedit index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
The process below was broken and is fixed with this patch. //add a simple action and give it an instance id of 1 sudo tc actions add action simple sdata "foobar" index 1 //create a filter which binds to simple action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action simple index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
The process below was broken and is fixed with this patch. //add an mirred action and give it an instance id of 1 sudo tc actions add action mirred egress mirror dev $MDEV index 1 //create a filter which binds to mirred action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action mirred index 1 Message before bug fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
This was broken and is fixed with this patch. //add an ipt action and give it an instance id of 1 sudo tc actions add action ipt -j mark --set-mark 2 index 1 //create a filter which binds to ipt action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action ipt index 1 Message before bug fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
Late vlan action binding was broken and is fixed with this patch. //add a vlan action to pop and give it an instance id of 1 sudo tc actions add action vlan pop index 1 //create filter which binds to vlan action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32 \ match ip dst 17.0.0.1/32 flowid 1:1 action vlan index 1 current message(before bug fix) was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 May, 2016 22 commits
-
-
Shaohui Xie authored
If phy was suspended and is starting, current driver always enable phy's interrupts, if phy works in polling, phy can raise unexpected interrupt which will not be handled, the interrupt will block system enter suspend again. So interrupts should only be re-enabled if phy works in interrupt. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In the very unlikely case __tcp_retransmit_skb() can not use the cloning done in tcp_transmit_skb(), we need to refresh skb_mstamp before doing the copy and transmit, otherwise TCP TS val will be an exact copy of original transmit. Fixes: 7faee5c0 ("tcp: remove TCP_SKB_CB(skb)->when") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Elad Kanfi says: ==================== nps_enet: Net driver bugs fix v3: tx_packet_sent flag is not necessary, use socket buffer pointer instead. Use wmb() instead of smp_wmb(). v2: Remove code style commit for now. Code style commit will be added after the bugs fix will be approved. Summary: 1. Bug description: TX done interrupts that arrives while interrupts are masked, during NAPI poll, will not trigger an interrupt handling. Since TX interrupt is of level edge we will lose the TX done interrupt. As a result all pending tx frames will get no service. Solution: Check if there is a pending tx request after unmasking the interrupt and if answer is yes then re-add ourselves to the NAPI poll list. 2. Bug description: CPU-A before sending a frame will set a variable to true. CPU-B that executes the tx done interrupt service routine might read a non valid value of that variable. Solution: Use the socket buffer pointer instead of the variable, and add a write memory barrier at the tx sending function after the pointer is set. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Elad Kanfi authored
The tx interrupt is of edge type, and in case such interrupt is triggered while it is masked it will not be handled even after tx interrupts are re-enabled in the end of NAPI poll. This will cause tx network to stop in the following scenario: * Rx is being handled, hence interrupts are masked. * Tx interrupt is triggered after checking if there is some tx to handle and before re-enabling the interrupts. In this situation only rx transaction will release tx requests. In order to handle the tx that was missed( if there was one ), a NAPI reschdule was added after enabling the interrupts. Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Acked-by: Noam Camus <noamca@mellanox.com> Acked-by: Gilad Ben-Yossef <giladby@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Elad Kanfi authored
Below is a description of a possible problematic sequence. CPU-A is sending a frame and CPU-B handles the interrupt that indicates the frame was sent. CPU-B reads an invalid value of tx_packet_sent. CPU-A CPU-B ----- ----- nps_enet_send_frame . . tx_skb = skb tx_packet_sent = true order HW to start tx . . HW complete tx ------> get tx complete interrupt . . if(tx_packet_sent == true) handle tx_skb end memory transaction (tx_packet_sent actually written) Furthermore there is a dependency between tx_skb and tx_packet_sent. There is no assurance that tx_skb contains a valid pointer at CPU B when it sees tx_packet_sent == true. Solution: Initialize tx_skb to NULL and use it to indicate that packet was sent, in this way tx_packet_sent can be removed. Add a write memory barrier after setting tx_skb in order to make sure that it is valid before HW is informed and IRQ is fired. Fixed sequence will be: CPU-A CPU-B ----- ----- tx_skb = skb wmb() . . order HW to start tx . . HW complete tx ------> get tx complete interrupt . . if(tx_skb != NULL) handle tx_skb tx_skb = NULL Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Acked-by: Noam Camus <noamca@mellanox.com> Acked-by: Gilad Ben-Yossef <giladby@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "Since v4.5, we've WARNed during resume if a PCI device, including a Thunderbolt device, was added while we were suspended. A change we merged for v4.6-rc1 turned that warning into a system hang. These enumeration patches from Lukas Wunner fix this issue: - Fix BUG on device attach failure - Do not treat EPROBE_DEFER as device attach failure" * tag 'pci-v4.6-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Do not treat EPROBE_DEFER as device attach failure PCI: Fix BUG on device attach failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Two topology corner case fixes, and a MAINTAINERS file update for mmiotrace maintenance" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/topology: Set x86_max_cores to 1 for CONFIG_SMP=n MAINTAINERS: Add mmiotrace entry x86/topology: Handle CPUID bogosity gracefully
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "A UP kernel cpufreq fix and a rt/dl scheduler corner case fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, sched/dl: Don't push if task's scheduling class was changed sched/fair: Fix !CONFIG_SMP kernel cpufreq governor breakage
-
Andrey Utkin authored
"make defconfig kvmconfig" is supposed to end up with usable kernel for KVM guest. In practice, it won't work for e.g. Hetzner VPS (KVM-based) unless you add these options. Signed-off-by: Andrey Utkin <andrey_utkin@fastmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Josh Poimboeuf authored
The kbuild test robot reported this objtool warning [1]: arch/x86/kvm/emulate.o: warning: objtool: fastop()+0x69: call without frame pointer save/setup The issue seems to be caused by CONFIG_PROFILE_ALL_BRANCHES. With that option, for some reason gcc decides not to create a stack frame in fastop() before doing the inline asm call, which can result in a bad stack trace. Force a stack frame to be created if CONFIG_FRAME_POINTER is enabled by listing the stack pointer as an output operand for the inline asm statement. This change has no effect for !CONFIG_PROFILE_ALL_BRANCHES. [1] https://lists.01.org/pipermail/kbuild-all/2016-March/018249.htmlReported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Xunlei Pang authored
We got this warning: WARNING: CPU: 1 PID: 2468 at kernel/sched/core.c:1161 set_task_cpu+0x1af/0x1c0 [...] Call Trace: dump_stack+0x63/0x87 __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 set_task_cpu+0x1af/0x1c0 push_dl_task.part.34+0xea/0x180 push_dl_tasks+0x17/0x30 __balance_callback+0x45/0x5c __sched_setscheduler+0x906/0xb90 SyS_sched_setattr+0x150/0x190 do_syscall_64+0x62/0x110 entry_SYSCALL64_slow_path+0x25/0x25 This corresponds to: WARN_ON_ONCE(p->state == TASK_RUNNING && p->sched_class == &fair_sched_class && (p->on_rq && !task_on_rq_migrating(p))) It happens because in find_lock_later_rq(), the task whose scheduling class was changed to fair class is still pushed away as if it were a deadline task ... So, check in find_lock_later_rq() after double_lock_balance(), if the scheduling class of the deadline task was changed, break and retry. Apply the same logic to RT tasks. Signed-off-by: Xunlei Pang <xlpang@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Juri Lelli <juri.lelli@arm.com> Link: http://lkml.kernel.org/r/1462767091-1215-1-git-send-email-xlpang@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Thomas Gleixner authored
Josef reported that the uncore driver trips over with CONFIG_SMP=n because x86_max_cores is 16 instead of 12. The reason is, that for SMP=n the extended topology detection is a NOOP and the cache leaf is used to determine the number of cores. That's wrong in two aspects: 1) The cache leaf enumerates the maximum addressable number of cores in the package, which is obviously not correct 2) UP has no business with topology bits at all. Make intel_num_cpu_cores() return 1 for CONFIG_SMP=n Reported-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team <Kernel-team@fb.com> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/761b4a2a-0332-7954-f030-c6639f949612@fb.com
-
Jamal Hadi Salim authored
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2016-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.6 iwlwifi * fix P2P rates (and possibly other issues) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contain Netfilter simple fixes for your net tree, two one-liner and one two-liner: 1) Oneliner to fix missing spinlock definition that triggers 'BUG: spinlock bad magic on CPU#' when spinlock debugging is enabled, from Florian Westphal. 2) Fix missing workqueue cancelation on IDLETIMER removal, from Liping Zhang. 3) Fix insufficient validation of netlink of NFACCT_QUOTA in nfnetlink_acct, from Phil Turnbull. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
xypron.glpk@gmx.de authored
Reserved fields should be set to zero to avoid exposing bits from the kernel stack. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kangjie Lu authored
Stack object "dte_facilities" is allocated in x25_rx_call_request(), which is supposed to be initialized in x25_negotiate_facilities. However, 5 fields (8 bytes in total) are not initialized. This object is then copied to userland via copy_to_user, thus infoleak occurs. Signed-off-by: Kangjie Lu <kjlu@gatech.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
When reopening the network device on ra7795/salvator-x, e.g. after a DHCP timeout: IP-Config: Reopening network devices... genirq: Flags mismatch irq 139. 00000000 (eth0:ch24:emac) vs. 00000000 (eth0:ch24:emac) ravb e6800000.ethernet eth0: cannot request IRQ eth0:ch24:emac IP-Config: Failed to open eth0 IP-Config: No network devices available The "mismatch" is due to requesting an IRQ that is already in use, while IRQF_PROBE_SHARED wasn't set. However, the real cause is that ravb_close() doesn't release the R-Car Gen3-specific secondary IRQ. Add the missing free_irq() call to fix this. Fixes: 22d4df8f ("ravb: Add support for r8a7795 SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mikko Rapeli authored
glibc's net/if.h contains copies of definitions from linux/if.h and these conflict and cause build failures if both files are included by application source code. Changes in uapi headers, which fixed header file dependencies to include linux/if.h when it was needed, e.g. commit 1ffad83d, made the net/if.h and linux/if.h incompatibilities visible as build failures for userspace applications like iproute2 and xtables-addons. This patch fixes compile errors when glibc net/if.h is included before linux/if.h: ./linux/if.h:99:21: error: redeclaration of enumerator ‘IFF_NOARP’ ./linux/if.h:98:23: error: redeclaration of enumerator ‘IFF_RUNNING’ ./linux/if.h:97:26: error: redeclaration of enumerator ‘IFF_NOTRAILERS’ ./linux/if.h:96:27: error: redeclaration of enumerator ‘IFF_POINTOPOINT’ ./linux/if.h:95:24: error: redeclaration of enumerator ‘IFF_LOOPBACK’ ./linux/if.h:94:21: error: redeclaration of enumerator ‘IFF_DEBUG’ ./linux/if.h:93:25: error: redeclaration of enumerator ‘IFF_BROADCAST’ ./linux/if.h:92:19: error: redeclaration of enumerator ‘IFF_UP’ ./linux/if.h:252:8: error: redefinition of ‘struct ifconf’ ./linux/if.h:203:8: error: redefinition of ‘struct ifreq’ ./linux/if.h:169:8: error: redefinition of ‘struct ifmap’ ./linux/if.h:107:23: error: redeclaration of enumerator ‘IFF_DYNAMIC’ ./linux/if.h:106:25: error: redeclaration of enumerator ‘IFF_AUTOMEDIA’ ./linux/if.h:105:23: error: redeclaration of enumerator ‘IFF_PORTSEL’ ./linux/if.h:104:25: error: redeclaration of enumerator ‘IFF_MULTICAST’ ./linux/if.h:103:21: error: redeclaration of enumerator ‘IFF_SLAVE’ ./linux/if.h:102:22: error: redeclaration of enumerator ‘IFF_MASTER’ ./linux/if.h:101:24: error: redeclaration of enumerator ‘IFF_ALLMULTI’ ./linux/if.h:100:23: error: redeclaration of enumerator ‘IFF_PROMISC’ The cases where linux/if.h is included before net/if.h need a similar fix in the glibc side, or the order of include files can be changed userspace code as a workaround. This change was tested in x86 userspace on Debian unstable with scripts/headers_compile_test.sh: $ make headers_install && \ cd usr/include && ../../scripts/headers_compile_test.sh -l -k ... cc -Wall -c -nostdinc -I /usr/lib/gcc/i586-linux-gnu/5/include -I /usr/lib/gcc/i586-linux-gnu/5/include-fixed -I . -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH/i586-linux-gnu -o /dev/null ./linux/if.h_libc_before_kernel.h PASSED libc before kernel test: ./linux/if.h Reported-by: Jan Engelhardt <jengelh@inai.de> Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Reported-by: Stephen Hemminger <shemming@brocade.com> Reported-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de> Cc: Gabriel Laskar <gabriel@lse.epita.fr> Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm build fix from Dan Williams: "A build fix for the usage of HPAGE_SIZE in the last libnvdimm pull request. I have taken note that the kbuild robot build success test does not include results for alpha_allmodconfig. Thanks to Guenter for the report. It's tagged for -stable since the original fix will land there and cause build problems" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, pfn: fix ARCH=alpha allmodconfig build failure
-
Andy Lutomirski authored
Allowing unprivileged kernel profiling lets any user dump follow kernel control flow and dump kernel registers. This most likely allows trivial kASLR bypassing, and it may allow other mischief as well. (Off the top of my head, the PERF_SAMPLE_REGS_INTR output during /dev/urandom reads could be quite interesting.) Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "2 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: zsmalloc: fix zs_can_compact() integer overflow Revert "proc/base: make prompt shell start from new line after executing "cat /proc/$pid/wchan""
-