- 03 Aug, 2019 1 commit
-
-
Dexuan Cui authored
There is a race condition for an established connection that is being closed by the guest: the refcnt is 4 at the end of hvs_release() (Note: here the 'remove_sock' is false): 1 for the initial value; 1 for the sk being in the bound list; 1 for the sk being in the connected list; 1 for the delayed close_work. After hvs_release() finishes, __vsock_release() -> sock_put(sk) *may* decrease the refcnt to 3. Concurrently, hvs_close_connection() runs in another thread: calls vsock_remove_sock() to decrease the refcnt by 2; call sock_put() to decrease the refcnt to 0, and free the sk; next, the "release_sock(sk)" may hang due to use-after-free. In the above, after hvs_release() finishes, if hvs_close_connection() runs faster than "__vsock_release() -> sock_put(sk)", then there is not any issue, because at the beginning of hvs_close_connection(), the refcnt is still 4. The issue can be resolved if an extra reference is taken when the connection is established. Fixes: a9eeb998 ("hv_sock: Add support for delayed close") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Aug, 2019 12 commits
-
-
Denis Kirjanov authored
get_registers() may fail with -ENOMEM and in this case we can read a garbage from the status variable tmp. Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Taras Kondratiuk authored
Commit 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") broke older tipc tools that use compat interface (e.g. tipc-config from tipcutils package): % tipc-config -p operation not supported The commit started to reject TIPC netlink compat messages that do not have attributes. It is too restrictive because some of such messages are valid (they don't need any arguments): % grep 'tx none' include/uapi/linux/tipc_config.h #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ This patch relaxes the original fix and rejects messages without arguments only if such arguments are expected by a command (reg_type is non zero). Fixes: 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") Cc: stable@vger.kernel.org Signed-off-by: Taras Kondratiuk <takondra@cisco.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Geert Uytterhoeven says: ==================== net: Manufacturer names and spelling fixes This is a set of fixes for (some blatantly) wrong manufacturer names and various spelling issues, mostly in Kconfig help texts. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Use "Packet Engines" consistently. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
The help text refers to AMD instead of Broadcom, presumably because it was copied from the former. Fixes: adfc5217 ("broadcom: Move the Broadcom drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
The help text refers to IBM instead of Apple, presumably because it was copied from the former. Fixes: 8fb6b090 ("bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
The help text refers to Western Digital instead of National Semiconductor 8390, presumably because it was copied from the former. Fixes: 644570b8 ("8390: Move the 8390 related drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matteo Croce authored
mvpp2 uses a delayed workqueue to gather traffic statistics. On module removal the workqueue can be destroyed before calling cancel_delayed_work_sync() on its works. Fix it by moving the destroy_workqueue() call after mvpp2_port_remove(). Also remove an unneeded call to flush_workqueue() # rmmod mvpp2 [ 2743.311722] mvpp2 f4000000.ethernet eth1: phy link down 10gbase-kr/10Gbps/Full [ 2743.320063] mvpp2 f4000000.ethernet eth1: Link is Down [ 2743.572263] mvpp2 f4000000.ethernet eth2: phy link down sgmii/1Gbps/Full [ 2743.580076] mvpp2 f4000000.ethernet eth2: Link is Down [ 2744.102169] mvpp2 f2000000.ethernet eth0: phy link down 10gbase-kr/10Gbps/Full [ 2744.110441] mvpp2 f2000000.ethernet eth0: Link is Down [ 2744.115614] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 2744.115615] Mem abort info: [ 2744.115616] ESR = 0x96000005 [ 2744.115617] Exception class = DABT (current EL), IL = 32 bits [ 2744.115618] SET = 0, FnV = 0 [ 2744.115619] EA = 0, S1PTW = 0 [ 2744.115620] Data abort info: [ 2744.115621] ISV = 0, ISS = 0x00000005 [ 2744.115622] CM = 0, WnR = 0 [ 2744.115624] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000422681000 [ 2744.115626] [0000000000000000] pgd=0000000000000000, pud=0000000000000000 [ 2744.115630] Internal error: Oops: 96000005 [#1] SMP [ 2744.115632] Modules linked in: mvpp2(-) algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore i2c_mv64xxx sfp usb_common marvell10g phy_generic spi_orion mdio_i2c i2c_core mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4 [last unloaded: mvpp2] [ 2744.115654] CPU: 3 PID: 8357 Comm: kworker/3:2 Not tainted 5.3.0-rc2 #1 [ 2744.115655] Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT) [ 2744.115665] Workqueue: events_power_efficient phylink_resolve [phylink] [ 2744.115669] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 2744.115675] pc : __queue_work+0x9c/0x4d8 [ 2744.115677] lr : __queue_work+0x170/0x4d8 [ 2744.115678] sp : ffffff801001bd50 [ 2744.115680] x29: ffffff801001bd50 x28: ffffffc422597600 [ 2744.115684] x27: ffffff80109ae6f0 x26: ffffff80108e4018 [ 2744.115688] x25: 0000000000000003 x24: 0000000000000004 [ 2744.115691] x23: ffffff80109ae6e0 x22: 0000000000000017 [ 2744.115694] x21: ffffffc42c030000 x20: ffffffc42209e8f8 [ 2744.115697] x19: 0000000000000000 x18: 0000000000000000 [ 2744.115699] x17: 0000000000000000 x16: 0000000000000000 [ 2744.115701] x15: 0000000000000010 x14: ffffffffffffffff [ 2744.115702] x13: ffffff8090e2b95f x12: ffffff8010e2b967 [ 2744.115704] x11: ffffff8010906000 x10: 0000000000000040 [ 2744.115706] x9 : ffffff80109223b8 x8 : ffffff80109223b0 [ 2744.115707] x7 : ffffffc42bc00068 x6 : 0000000000000000 [ 2744.115709] x5 : ffffffc42bc00000 x4 : 0000000000000000 [ 2744.115710] x3 : 0000000000000000 x2 : 0000000000000000 [ 2744.115712] x1 : 0000000000000008 x0 : ffffffc42c030000 [ 2744.115714] Call trace: [ 2744.115716] __queue_work+0x9c/0x4d8 [ 2744.115718] delayed_work_timer_fn+0x28/0x38 [ 2744.115722] call_timer_fn+0x3c/0x180 [ 2744.115723] expire_timers+0x60/0x168 [ 2744.115724] run_timer_softirq+0xbc/0x1e8 [ 2744.115727] __do_softirq+0x128/0x320 [ 2744.115731] irq_exit+0xa4/0xc0 [ 2744.115734] __handle_domain_irq+0x70/0xc0 [ 2744.115735] gic_handle_irq+0x58/0xa8 [ 2744.115737] el1_irq+0xb8/0x140 [ 2744.115738] console_unlock+0x3a0/0x568 [ 2744.115740] vprintk_emit+0x200/0x2a0 [ 2744.115744] dev_vprintk_emit+0x1c8/0x1e4 [ 2744.115747] dev_printk_emit+0x6c/0x7c [ 2744.115751] __netdev_printk+0x104/0x1d8 [ 2744.115752] netdev_printk+0x60/0x70 [ 2744.115756] phylink_resolve+0x38c/0x3c8 [phylink] [ 2744.115758] process_one_work+0x1f8/0x448 [ 2744.115760] worker_thread+0x54/0x500 [ 2744.115762] kthread+0x12c/0x130 [ 2744.115764] ret_from_fork+0x10/0x1c [ 2744.115768] Code: aa1403e0 97fffbbe aa0003f5 b4000700 (f9400261) Fixes: 118d6298 ("net: mvpp2: add ethtool GOP statistics") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 31 Jul, 2019 14 commits
-
-
Frode Isaksen authored
This variant of netif_napi_add() should be used from drivers using NAPI to exclusively poll a TX queue. Signed-off-by: Frode Isaksen <fisaksen@baylibre.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
When permanent entries were introduced by the commit below, they were exempt from timing out and thus igmp leave wouldn't affect them unless fast leave was enabled on the port which was added before permanent entries existed. It shouldn't matter if fast leave is enabled or not if the user added a permanent entry it shouldn't be deleted on igmp leave. Before: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show $ After: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent Fixes: ccb1c31a ("bridge: add flags to distinguish permanent mdb entires") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jia-Ju Bai authored
net: phy: phy_led_triggers: Fix a possible null-pointer dereference in phy_led_trigger_change_speed() In phy_led_trigger_change_speed(), there is an if statement on line 48 to check whether phy->last_triggered is NULL: if (!phy->last_triggered) When phy->last_triggered is NULL, it is used on line 52: led_trigger_event(&phy->last_triggered->trigger, LED_OFF); Thus, a possible null-pointer dereference may occur. To fix this bug, led_trigger_event(&phy->last_triggered->trigger, LED_OFF) is called when phy->last_triggered is not NULL. This bug is found by a static analysis tool STCheck written by the OSLAB group in Tsinghua University. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Build bot reports some recent TLS tests are failing with CONFIG_TLS=n. Correct the expected return code and skip TLS installation if not supported. Tested with CONFIG_TLS=n and CONFIG_TLS=m. Reported-by: kernel test robot <rong.a.chen@intel.com> Fixes: cf32526c ("selftests/tls: add a test for ULP but no keys") Fixes: 65d41fb3 ("selftests/tls: add a bidirectional test") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Juliana Rodrigueiro authored
Since linux 4.9 it is not possible to use buffers on the stack for DMA transfers. During usb probe the driver crashes with "transfer buffer is on stack" message. This fix k-allocates a buffer to be used on "read_reg_atomic", which is a macro that calls "usb_control_msg" under the hood. Kernel 4.19 backtrace: usb_hcd_submit_urb+0x3e5/0x900 ? sched_clock+0x9/0x10 ? log_store+0x203/0x270 ? get_random_u32+0x6f/0x90 ? cache_alloc_refill+0x784/0x8a0 usb_submit_urb+0x3b4/0x550 usb_start_wait_urb+0x4e/0xd0 usb_control_msg+0xb8/0x120 hfcsusb_probe+0x6bc/0xb40 [hfcsusb] usb_probe_interface+0xc2/0x260 really_probe+0x176/0x280 driver_probe_device+0x49/0x130 __driver_attach+0xa9/0xb0 ? driver_probe_device+0x130/0x130 bus_for_each_dev+0x5a/0x90 driver_attach+0x14/0x20 ? driver_probe_device+0x130/0x130 bus_add_driver+0x157/0x1e0 driver_register+0x51/0xe0 usb_register_driver+0x5d/0x120 ? 0xf81ed000 hfcsusb_drv_init+0x17/0x1000 [hfcsusb] do_one_initcall+0x44/0x190 ? free_unref_page_commit+0x6a/0xd0 do_init_module+0x46/0x1c0 load_module+0x1dc1/0x2400 sys_init_module+0xed/0x120 do_fast_syscall_32+0x7a/0x200 entry_SYSENTER_32+0x6b/0xbe Signed-off-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
The whole block is protected by "if NET_VENDOR_MEDIATEK", so there is no need for individual driver config symbols to duplicate this dependency. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2019-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a few fixes: * revert NETIF_F_LLTX usage as it caused problems * avoid warning on WMM parameters from AP that are too short * fix possible null-ptr dereference in hwsim * fix interface combinations with 4-addr and crypto control ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== netfilter fixes for net The following patchset contains Netfilter fixes for your net tree: 1) memleak in ebtables from the error path for the 32/64 compat layer, from Florian Westphal. 2) Fix inverted meta ifname/ifidx matching when no interface is set on either from the input/output path, from Phil Sutter. 3) Remove goto label in nft_meta_bridge, also from Phil. 4) Missing include guard in xt_connlabel, from Masahiro Yamada. 5) Two patch to fix ipset destination MAC matching coming from Stephano Brivio, via Jozsef Kadlecsik. 6) Fix set rename and listing concurrency problem, from Shijie Luo. Patch also coming via Jozsef Kadlecsik. 7) ebtables 32/64 compat missing base chain policy in rule count, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
There is no need to use GFP_ATOMIC here, GFP_KERNEL should be enough. The 'kcalloc()' just a few lines above, already uses GFP_KERNEL. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
There is no good reason to use GFP_ATOMIC here. Other memory allocations are performed with GFP_KERNEL (see other 'dma_alloc_coherent()' below and 'kzalloc()' in 'et131x_rx_dma_memory_alloc()') Use GFP_KERNEL which should be enough. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Fixes: 6e43650c ("add maintainer for network drop monitor kernel service") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Two small fixes Patch #1 from Jiri fixes the error path of the module initialization function. Found during manual code inspection. Patch #2 from Petr further reduces the default shared buffer pool sizes in order to work around a problem that was originally described in commit e891ce1d ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2"). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
In commit e891ce1d ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2"), pool size was reduced to mitigate a problem in port buffer usage of ports split four ways. It turns out that this work around does not solve the issue, and a further reduction is required. Thus reduce the size of pool 0 by another 2.7 MiB, and round down to the whole number of cells. Fixes: e891ce1d ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
In case of sp2 pci driver registration fail, fix the error path to start with sp1 pci driver unregister. Fixes: c3ab4354 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Jul, 2019 13 commits
-
-
xiaofeis authored
Set phy device advertising to enable MAC flow control. Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in linux-2.5.69 along with hundreds of other commands, but was always broken sincen only the structure is compatible, but the command number is not, due to the size being sizeof(size_t), or at first sizeof(sizeof((struct sockaddr_pppox)), which is different on 64-bit architectures. Guillaume Nault adds: And the implementation was broken until 2016 (see 29e73269 ("pppoe: fix reference counting in PPPoE proxy")), and nobody ever noticed. I should probably have removed this ioctl entirely instead of fixing it. Clearly, it has never been used. Fix it by adding a compat_ioctl handler for all pppoe variants that translates the command number and then calls the regular ioctl function. All other ioctl commands handled by pppoe are compatible between 32-bit and 64-bit, and require compat_ptr() conversion. This should apply to all stable kernels. Acked-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
Our test suite somtimes provokes the following crash: Description of problem: [ 1092.597234] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8 [ 1092.605072] PGD 0 P4D 0 [ 1092.607620] Oops: 0000 [#1] SMP PTI [ 1092.611118] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Not tainted 4.18.0-122.el8.x86_64 #1 [ 1092.619724] Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 1.3.7 02/08/2018 [ 1092.627215] RIP: 0010:tipc_mcast_filter_msg+0x93/0x2d0 [tipc] [ 1092.632955] Code: 0f 84 aa 01 00 00 89 cf 4d 01 ca 4c 8b 26 c1 ef 19 83 e7 0f 83 ff 0c 4d 0f 45 d1 41 8b 6a 10 0f cd 4c 39 e6 0f 84 81 01 00 00 <4d> 8b 9c 24 e8 00 00 00 45 8b 13 41 0f ca 44 89 d7 c1 ef 13 83 e7 [ 1092.651703] RSP: 0018:ffff929e5fa83a18 EFLAGS: 00010282 [ 1092.656927] RAX: ffff929e3fb38100 RBX: 00000000069f29ee RCX: 00000000416c0045 [ 1092.664058] RDX: ffff929e5fa83a88 RSI: ffff929e31a28420 RDI: 0000000000000000 [ 1092.671209] RBP: 0000000029b11821 R08: 0000000000000000 R09: ffff929e39b4407a [ 1092.678343] R10: ffff929e39b4407a R11: 0000000000000007 R12: 0000000000000000 [ 1092.685475] R13: 0000000000000001 R14: ffff929e3fb38100 R15: ffff929e39b4407a [ 1092.692614] FS: 0000000000000000(0000) GS:ffff929e5fa80000(0000) knlGS:0000000000000000 [ 1092.700702] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1092.706447] CR2: 00000000000000e8 CR3: 000000031300a004 CR4: 00000000007606e0 [ 1092.713579] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1092.720712] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1092.727843] PKRU: 55555554 [ 1092.730556] Call Trace: [ 1092.733010] <IRQ> [ 1092.735034] tipc_sk_filter_rcv+0x7ca/0xb80 [tipc] [ 1092.739828] ? __kmalloc_node_track_caller+0x1cb/0x290 [ 1092.744974] ? dev_hard_start_xmit+0xa5/0x210 [ 1092.749332] tipc_sk_rcv+0x389/0x640 [tipc] [ 1092.753519] tipc_sk_mcast_rcv+0x23c/0x3a0 [tipc] [ 1092.758224] tipc_rcv+0x57a/0xf20 [tipc] [ 1092.762154] ? ktime_get_real_ts64+0x40/0xe0 [ 1092.766432] ? tpacket_rcv+0x50/0x9f0 [ 1092.770098] tipc_l2_rcv_msg+0x4a/0x70 [tipc] [ 1092.774452] __netif_receive_skb_core+0xb62/0xbd0 [ 1092.779164] ? enqueue_entity+0xf6/0x630 [ 1092.783084] ? kmem_cache_alloc+0x158/0x1c0 [ 1092.787272] ? __build_skb+0x25/0xd0 [ 1092.790849] netif_receive_skb_internal+0x42/0xf0 [ 1092.795557] napi_gro_receive+0xba/0xe0 [ 1092.799417] mlx5e_handle_rx_cqe+0x83/0xd0 [mlx5_core] [ 1092.804564] mlx5e_poll_rx_cq+0xd5/0x920 [mlx5_core] [ 1092.809536] mlx5e_napi_poll+0xb2/0xce0 [mlx5_core] [ 1092.814415] ? __wake_up_common_lock+0x89/0xc0 [ 1092.818861] net_rx_action+0x149/0x3b0 [ 1092.822616] __do_softirq+0xe3/0x30a [ 1092.826193] irq_exit+0x100/0x110 [ 1092.829512] do_IRQ+0x85/0xd0 [ 1092.832483] common_interrupt+0xf/0xf [ 1092.836147] </IRQ> [ 1092.838255] RIP: 0010:cpuidle_enter_state+0xb7/0x2a0 [ 1092.843221] Code: e8 3e 79 a5 ff 80 7c 24 03 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 d7 01 00 00 31 ff e8 a0 6b ab ff fb 66 0f 1f 44 00 00 <48> b8 ff ff ff ff f3 01 00 00 4c 29 f3 ba ff ff ff 7f 48 39 c3 7f [ 1092.861967] RSP: 0018:ffffaa5ec6533e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd [ 1092.869530] RAX: ffff929e5faa3100 RBX: 000000fe63dd2092 RCX: 000000000000001f [ 1092.876665] RDX: 000000fe63dd2092 RSI: 000000003a518aaa RDI: 0000000000000000 [ 1092.883795] RBP: 0000000000000003 R08: 0000000000000004 R09: 0000000000022940 [ 1092.890929] R10: 0000040cb0666b56 R11: ffff929e5faa20a8 R12: ffff929e5faade78 [ 1092.898060] R13: ffffffffb59258f8 R14: 000000fe60f3228d R15: 0000000000000000 [ 1092.905196] ? cpuidle_enter_state+0x92/0x2a0 [ 1092.909555] do_idle+0x236/0x280 [ 1092.912785] cpu_startup_entry+0x6f/0x80 [ 1092.916715] start_secondary+0x1a7/0x200 [ 1092.920642] secondary_startup_64+0xb7/0xc0 [...] The reason is that the skb list tipc_socket::mc_method.deferredq only is initialized for connectionless sockets, while nothing stops arriving multicast messages from being filtered by connection oriented sockets, with subsequent access to the said list. We fix this by initializing the list unconditionally at socket creation. This eliminates the crash, while the message still is dropped further down in tipc_sk_filter_rcv() as it should be. Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== Here are a couple of fixes for rxrpc: (1) Fix a potential deadlock in the peer keepalive dispatcher. (2) Fix a missing notification when a UDP sendmsg error occurs in rxrpc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
If PHYLIB is not set, build enetc will fails: drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open': enetc.c: undefined reference to `phy_disconnect' enetc.c: undefined reference to `phy_start' drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close': enetc.c: undefined reference to `phy_stop' enetc.c: undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o: undefined reference to `phy_ethtool_get_link_ksettings' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o: undefined reference to `phy_ethtool_set_link_ksettings' drivers/net/ethernet/freescale/enetc/enetc_mdio.o: In function `enetc_mdio_probe': enetc_mdio.c: undefined reference to `mdiobus_alloc_size' enetc_mdio.c: undefined reference to `mdiobus_free' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
With recent changes that introduced support for Page Pool in stmmac, Jon reported that NFS boot was no longer working on an ARM64 based platform that had the IP behind an IOMMU. As Page Pool API does not guarantee DMA syncing because of the use of DMA_ATTR_SKIP_CPU_SYNC flag, we have to explicit sync the whole buffer upon re-allocation because we are always re-using same pages. In fact, ARM64 code invalidates the DMA area upon two situations [1]: - sync_single_for_cpu(): Invalidates if direction != DMA_TO_DEVICE - sync_single_for_device(): Invalidates if direction == DMA_FROM_DEVICE So, as we must invalidate both the current RX buffer and the newly allocated buffer we propose this fix. [1] arch/arm64/mm/cache.S Reported-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Fixes: 2af6106a ("net: stmmac: Introducing support for Page Pool") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Tested-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Currently are duplicated checks on orig_egr_types which are redundant, I believe this is a typo and should actually be orig_ing_types || orig_egr_types instead of the expression orig_egr_types || orig_egr_types. Fix these. Addresses-Coverity: ("Same on both sides") Fixes: c6b36bdd ("mlxsw: spectrum_ptp: Increase parsing depth when PTP is enabled") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hubert Feurstein authored
Using the define here makes the code more expressive. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hubert Feurstein authored
It is perfectly ok to not have an gpio attached to the fixed-link node. So the driver should not throw an error message when the gpio is missing. Fixes: 5468e82f ("net: phy: fixed-phy: Drop GPIO from fixed_phy_add()") Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
Fix the fact that a notification isn't sent to the recvmsg side to indicate a call failed when sendmsg() fails to transmit a DATA packet with the error ENETUNREACH, EHOSTUNREACH or ECONNREFUSED. Without this notification, the afs client just sits there waiting for the call to complete in some manner (which it's not now going to do), which also pins the rxrpc call in place. This can be seen if the client has a scope-level IPv6 address, but not a global-level IPv6 address, and we try and transmit an operation to a server's IPv6 address. Looking in /proc/net/rxrpc/calls shows completed calls just sat there with an abort code of RX_USER_ABORT and an error code of -ENETUNREACH. Fixes: c54e43d7 ("rxrpc: Fix missing start of call timeout") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
-
David Howells authored
There is a potential deadlock in rxrpc_peer_keepalive_dispatch() whereby rxrpc_put_peer() is called with the peer_hash_lock held, but if it reduces the peer's refcount to 0, rxrpc_put_peer() calls __rxrpc_put_peer() - which the tries to take the already held lock. Fix this by providing a version of rxrpc_put_peer() that can be called in situations where the lock is already held. The bug may produce the following lockdep report: ============================================ WARNING: possible recursive locking detected 5.2.0-next-20190718 #41 Not tainted -------------------------------------------- kworker/0:3/21678 is trying to acquire lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: __rxrpc_put_peer /net/rxrpc/peer_object.c:415 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_put_peer+0x2d3/0x6a0 /net/rxrpc/peer_object.c:435 but task is already holding lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_dispatch /net/rxrpc/peer_event.c:378 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_worker+0x6b3/0xd02 /net/rxrpc/peer_event.c:430 Fixes: 330bdcfa ("rxrpc: Fix the keepalive generator [ver #2]") Reported-by: syzbot+72af434e4b3417318f84@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
-
Johannes Berg authored
Revert this for now, it has been reported multiple times that it completely breaks connectivity on various devices. Cc: stable@vger.kernel.org Fixes: 8dbb000e ("mac80211: set NETIF_F_LLTX when using intermediate tx queues") Reported-by: Jean Delvare <jdelvare@suse.de> Reported-by: Peter Lebbing <peter@digitalbrains.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
git://blackhole.kfki.hu/nfPablo Neira Ayuso authored
Jozsef Kadlecsik says: ==================== ipset patches for the nf tree - When the support of destination MAC addresses for hash:mac sets was introduced, it was forgotten to add the same functionality to hash:ip,mac types of sets. The patch from Stefano Brivio adds the missing part. - When the support of destination MAC addresses for hash:mac sets was introduced, a copy&paste error was made in the code of the hash:ip,mac and bitmap:ip,mac types: the MAC address in these set types is in the second position and not in the first one. Stefano Brivio's patch fixes the issue. - There was still a not properly handled concurrency handling issue between renaming and listing sets at the same time, reported by Shijie Luo. ==================== Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-