1. 06 Jan, 2017 24 commits
    • Hui Wang's avatar
      ALSA: hda - fix headset-mic problem on a Dell laptop · 685c4db1
      Hui Wang authored
      commit 989dbe4a upstream.
      
      This group of new pins is not in the pin quirk table yet, adding
      them to the pin quirk table to fix the headset-mic problem.
      Signed-off-by: default avatarHui Wang <hui.wang@canonical.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      685c4db1
    • Hui Wang's avatar
      ALSA: hda - ignore the assoc and seq when comparing pin configurations · b757fc01
      Hui Wang authored
      commit 64047d7f upstream.
      
      More and more pin configurations have been adding to the pin quirk
      table, lots of them are only different from assoc and seq, but they
      all apply to the same QUIRK_FIXUP, if we don't compare assoc and seq
      when matching pin configurations, it will greatly reduce the pin
      quirk table size.
      
      We have tested this change on a couple of Dell laptops, it worked
      well.
      Signed-off-by: default avatarHui Wang <hui.wang@canonical.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b757fc01
    • Sven Hahne's avatar
      ALSA: hda/ca0132 - Add quirk for Alienware 15 R2 2016 · 38c6095f
      Sven Hahne authored
      commit b5337cfe upstream.
      
      I'm using an Alienware 15 R2 and had to use the alienware quirks to
      get my headphone output working.
      
      I fixed it by adding, SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2
      2016", QUIRK_ALIENWARE) to the patch.
      Signed-off-by: default avatarSven Hahne <hahne@zeitkunst.eu>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      38c6095f
    • Jussi Laako's avatar
      ALSA: hiface: Fix M2Tech hiFace driver sampling rate change · 5496ec42
      Jussi Laako authored
      commit 995c6a7f upstream.
      
      Sampling rate changes after first set one are not reflected to the
      hardware, while driver and ALSA think the rate has been changed.
      
      Fix the problem by properly stopping the interface at the beginning of
      prepare call, allowing new rate to be set to the hardware. This keeps
      the hardware in sync with the driver.
      Signed-off-by: default avatarJussi Laako <jussi@sonarnerd.net>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5496ec42
    • Con Kolivas's avatar
      ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks · abf549a8
      Con Kolivas authored
      commit 82ffb6fc upstream.
      
      The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the
      following warning.
      
      [    6.778995] usb 2-1.2.2.2: Warning! Unlikely big volume range (=3072),
      cval->res is probably wrong.
      [    6.778996] usb 2-1.2.2.2: [5] FU [Mic Capture Volume] ch = 1, val =
      4608/7680/1
      
      Adding it to the list of devices in volume_control_quirks makes it work
      properly, fixing related typo.
      Signed-off-by: default avatarCon Kolivas <kernel@kolivas.org>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      abf549a8
    • Krzysztof Opasiak's avatar
      usbip: vudc: fix: Clear already_seen flag also for ep0 · 6b0a56e9
      Krzysztof Opasiak authored
      commit 3e448e13 upstream.
      
      ep_list inside gadget structure doesn't contain ep0.
      It is stored separately in ep0 field.
      
      This causes an urb hang if gadget driver decides to
      delay setup handling. On host side this is visible as
      timeout error when setting configuration.
      
      This bug can be reproduced using for example any gadget
      with mass storage function.
      
      Fixes: abdb2957 ("usbip: vudc: Add vudc_transfer")
      Signed-off-by: default avatarKrzysztof Opasiak <k.opasiak@samsung.com>
      Acked-by: default avatarShuah Khan <shuahkh@osg.samsung.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6b0a56e9
    • Alan Stern's avatar
      USB: UHCI: report non-PME wakeup signalling for Intel hardware · a9143e58
      Alan Stern authored
      commit ccdb6be9 upstream.
      
      The UHCI controllers in Intel chipsets rely on a platform-specific non-PME
      mechanism for wakeup signalling.  They can generate wakeup signals even
      though they don't support PME.
      
      We need to let the USB core know this so that it will enable runtime
      suspend for UHCI controllers.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      Acked-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a9143e58
    • Felipe Balbi's avatar
      usb: gadget: composite: correctly initialize ep->maxpacket · 4422a269
      Felipe Balbi authored
      commit e8f29bb7 upstream.
      
      usb_endpoint_maxp() returns wMaxPacketSize in its
      raw form. Without taking into consideration that it
      also contains other bits reserved for isochronous
      endpoints.
      
      This patch fixes one occasion where this is a
      problem by making sure that we initialize
      ep->maxpacket only with lower 10 bits of the value
      returned by usb_endpoint_maxp(). Note that seperate
      patches will be necessary to audit all call sites of
      usb_endpoint_maxp() and make sure that
      usb_endpoint_maxp() only returns lower 10 bits of
      wMaxPacketSize.
      Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4422a269
    • Peter Chen's avatar
      usb: gadget: f_uac2: fix error handling at afunc_bind · be8f1c44
      Peter Chen authored
      commit f1d3861d upstream.
      
      The current error handling flow uses incorrect goto label, fix it
      
      Fixes: d12a8727 ("usb: gadget: function: Remove redundant usb_free_all_descriptors")
      Signed-off-by: default avatarPeter Chen <peter.chen@nxp.com>
      Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      be8f1c44
    • Mathias Nyman's avatar
      usb: hub: Fix auto-remount of safely removed or ejected USB-3 devices · 79d5a30e
      Mathias Nyman authored
      commit 37be6676 upstream.
      
      USB-3 does not have any link state that will avoid negotiating a connection
      with a plugged-in cable but will signal the host when the cable is
      unplugged.
      
      For USB-3 we used to first set the link to Disabled, then to RxDdetect to
      be able to detect cable connects or disconnects. But in RxDetect the
      connected device is detected again and eventually enabled.
      
      Instead set the link into U3 and disable remote wakeups for the device.
      This is what Windows does, and what Alan Stern suggested.
      
      Cc: Alan Stern <stern@rowland.harvard.edu>
      Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarMathias Nyman <mathias.nyman@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      79d5a30e
    • Felipe Balbi's avatar
      usb: dwc3: gadget: set PCM1 field of isochronous-first TRBs · e3dfbc89
      Felipe Balbi authored
      commit 6b9018d4 upstream.
      
      In case of High-Speed, High-Bandwidth endpoints, we
      need to tell DWC3 that we have more than one packet
      per interval. We do that by setting PCM1 field of
      Isochronous-First TRB.
      Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e3dfbc89
    • Nathaniel Quillin's avatar
      USB: cdc-acm: add device id for GW Instek AFG-125 · 269edaef
      Nathaniel Quillin authored
      commit 30121604 upstream.
      
      Add device-id entry for GW Instek AFG-125, which has a byte swapped
      bInterfaceSubClass (0x20).
      Signed-off-by: default avatarNathaniel Quillin <ndq@google.com>
      Acked-by: default avatarOliver Neukum <oneukum@suse.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      269edaef
    • Johan Hovold's avatar
      USB: serial: kl5kusb105: fix open error path · 741523f3
      Johan Hovold authored
      commit 6774d5f5 upstream.
      
      Kill urbs and disable read before returning from open on failure to
      retrieve the line state.
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      741523f3
    • Giuseppe Lippolis's avatar
      USB: serial: option: add dlink dwm-158 · f34b7e02
      Giuseppe Lippolis authored
      commit d8a12b71 upstream.
      
      Adding registration for 3G modem DWM-158 in usb-serial-option
      Signed-off-by: default avatarGiuseppe Lippolis <giu.lippolis@gmail.com>
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f34b7e02
    • Daniele Palmas's avatar
      USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041 · e47e81c4
      Daniele Palmas authored
      commit 5b09eff0 upstream.
      
      This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A.
      
      Since the interface positions are the same than the ones used
      for other Telit compositions, previous defined blacklists are used.
      Signed-off-by: default avatarDaniele Palmas <dnlplm@gmail.com>
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e47e81c4
    • Filipe Manana's avatar
      Btrfs: fix qgroup rescan worker initialization · 3aa3cb94
      Filipe Manana authored
      commit 8d9eddad upstream.
      
      We were setting the qgroup_rescan_running flag to true only after the
      rescan worker started (which is a task run by a queue). So if a user
      space task starts a rescan and immediately after asks to wait for the
      rescan worker to finish, this second call might happen before the rescan
      worker task starts running, in which case the rescan wait ioctl returns
      immediatley, not waiting for the rescan worker to finish.
      
      This was making the fstest btrfs/022 fail very often.
      
      Fixes: d2c609b8 (btrfs: properly track when rescan worker is running)
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3aa3cb94
    • Filipe Manana's avatar
      Btrfs: fix emptiness check for dirtied extent buffers at check_leaf() · 691ea6c7
      Filipe Manana authored
      commit f177d739 upstream.
      
      We can not simply use the owner field from an extent buffer's header to
      get the id of the respective tree when the extent buffer is from a
      relocation tree. When we create the root for a relocation tree we leave
      (on purpose) the owner field with the same value as the subvolume's tree
      root (we do this at ctree.c:btrfs_copy_root()). So we must ignore extent
      buffers from relocation trees, which have the BTRFS_HEADER_FLAG_RELOC
      flag set, because otherwise we will always consider the extent buffer
      as not being the root of the tree (the root of original subvolume tree
      is always different from the root of the respective relocation tree).
      
      This lead to assertion failures when running with the integrity checker
      enabled (CONFIG_BTRFS_FS_CHECK_INTEGRITY=y) such as the following:
      
      [  643.393409] BTRFS critical (device sdg): corrupt leaf, non-root leaf's nritems is 0: block=38506496, root=260, slot=0
      [  643.397609] BTRFS info (device sdg): leaf 38506496 total ptrs 0 free space 3995
      [  643.407075] assertion failed: 0, file: fs/btrfs/disk-io.c, line: 4078
      [  643.408425] ------------[ cut here ]------------
      [  643.409112] kernel BUG at fs/btrfs/ctree.h:3419!
      [  643.409773] invalid opcode: 0000 [#1] PREEMPT SMP
      [  643.410447] Modules linked in: dm_flakey dm_mod crc32c_generic btrfs xor raid6_pq ppdev psmouse acpi_cpufreq parport_pc evdev parport tpm_tis tpm_tis_core pcspkr serio_raw i2c_piix4 sg tpm i2c_core button processor loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring scsi_mod virtio e1000 floppy
      [  643.414356] CPU: 11 PID: 32726 Comm: btrfs Not tainted 4.8.0-rc8-btrfs-next-35+ #1
      [  643.414356] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
      [  643.414356] task: ffff880145e95b00 task.stack: ffff88014826c000
      [  643.414356] RIP: 0010:[<ffffffffa0352759>]  [<ffffffffa0352759>] assfail.constprop.41+0x1c/0x1e [btrfs]
      [  643.414356] RSP: 0018:ffff88014826fa28  EFLAGS: 00010292
      [  643.414356] RAX: 0000000000000039 RBX: ffff88014e2d7c38 RCX: 0000000000000001
      [  643.414356] RDX: ffff88023f4d2f58 RSI: ffffffff81806c63 RDI: 00000000ffffffff
      [  643.414356] RBP: ffff88014826fa28 R08: 0000000000000001 R09: 0000000000000000
      [  643.414356] R10: ffff88014826f918 R11: ffffffff82f3c5ed R12: ffff880172910000
      [  643.414356] R13: ffff880233992230 R14: ffff8801a68a3310 R15: fffffffffffffff8
      [  643.414356] FS:  00007f9ca305e8c0(0000) GS:ffff88023f4c0000(0000) knlGS:0000000000000000
      [  643.414356] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [  643.414356] CR2: 00007f9ca3071000 CR3: 000000015d01b000 CR4: 00000000000006e0
      [  643.414356] Stack:
      [  643.414356]  ffff88014826fa50 ffffffffa02d655a 000000000000000a ffff88014e2d7c38
      [  643.414356]  0000000000000000 ffff88014826faa8 ffffffffa02b72f3 ffff88014826fab8
      [  643.414356]  00ffffffa03228e4 0000000000000000 0000000000000000 ffff8801bbd4e000
      [  643.414356] Call Trace:
      [  643.414356]  [<ffffffffa02d655a>] btrfs_mark_buffer_dirty+0xdf/0xe5 [btrfs]
      [  643.414356]  [<ffffffffa02b72f3>] btrfs_copy_root+0x18a/0x1d1 [btrfs]
      [  643.414356]  [<ffffffffa0322921>] create_reloc_root+0x72/0x1ba [btrfs]
      [  643.414356]  [<ffffffffa03267c2>] btrfs_init_reloc_root+0x7b/0xa7 [btrfs]
      [  643.414356]  [<ffffffffa02d9e44>] record_root_in_trans+0xdf/0xed [btrfs]
      [  643.414356]  [<ffffffffa02db04e>] btrfs_record_root_in_trans+0x50/0x6a [btrfs]
      [  643.414356]  [<ffffffffa030ad2b>] create_subvol+0x472/0x773 [btrfs]
      [  643.414356]  [<ffffffffa030b406>] btrfs_mksubvol+0x3da/0x463 [btrfs]
      [  643.414356]  [<ffffffffa030b406>] ? btrfs_mksubvol+0x3da/0x463 [btrfs]
      [  643.414356]  [<ffffffff810781ac>] ? preempt_count_add+0x65/0x68
      [  643.414356]  [<ffffffff811a6e97>] ? __mnt_want_write+0x62/0x77
      [  643.414356]  [<ffffffffa030b55d>] btrfs_ioctl_snap_create_transid+0xce/0x187 [btrfs]
      [  643.414356]  [<ffffffffa030b67d>] btrfs_ioctl_snap_create+0x67/0x81 [btrfs]
      [  643.414356]  [<ffffffffa030ecfd>] btrfs_ioctl+0x508/0x20dd [btrfs]
      [  643.414356]  [<ffffffff81293e39>] ? __this_cpu_preempt_check+0x13/0x15
      [  643.414356]  [<ffffffff81155eca>] ? handle_mm_fault+0x976/0x9ab
      [  643.414356]  [<ffffffff81091300>] ? arch_local_irq_save+0x9/0xc
      [  643.414356]  [<ffffffff8119a2b0>] vfs_ioctl+0x18/0x34
      [  643.414356]  [<ffffffff8119a8e8>] do_vfs_ioctl+0x581/0x600
      [  643.414356]  [<ffffffff814b9552>] ? entry_SYSCALL_64_fastpath+0x5/0xa8
      [  643.414356]  [<ffffffff81093fe9>] ? trace_hardirqs_on_caller+0x17b/0x197
      [  643.414356]  [<ffffffff8119a9be>] SyS_ioctl+0x57/0x79
      [  643.414356]  [<ffffffff814b9565>] entry_SYSCALL_64_fastpath+0x18/0xa8
      [  643.414356]  [<ffffffff81091b08>] ? trace_hardirqs_off_caller+0x3f/0xaa
      [  643.414356] Code: 89 83 88 00 00 00 31 c0 5b 41 5c 41 5d 5d c3 55 89 f1 48 c7 c2 98 bc 35 a0 48 89 fe 48 c7 c7 05 be 35 a0 48 89 e5 e8 13 46 dd e0 <0f> 0b 55 89 f1 48 c7 c2 9f d3 35 a0 48 89 fe 48 c7 c7 7a d5 35
      [  643.414356] RIP  [<ffffffffa0352759>] assfail.constprop.41+0x1c/0x1e [btrfs]
      [  643.414356]  RSP <ffff88014826fa28>
      [  643.468267] ---[ end trace 6a1b3fb1a9d7d6e3 ]---
      
      This can be easily reproduced by running xfstests with the integrity
      checker enabled.
      
      Fixes: 1ba98d08 (Btrfs: detect corruption when non-root leaf has zero item)
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      691ea6c7
    • David Sterba's avatar
      btrfs: store and load values of stripes_min/stripes_max in balance status item · 0695d8b1
      David Sterba authored
      commit ed0df618 upstream.
      
      The balance status item contains currently known filter values, but the
      stripes filter was unintentionally not among them. This would mean, that
      interrupted and automatically restarted balance does not apply the
      stripe filters.
      
      Fixes: dee32d0aSigned-off-by: default avatarDavid Sterba <dsterba@suse.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0695d8b1
    • Filipe Manana's avatar
      Btrfs: fix relocation incorrectly dropping data references · 80f7d283
      Filipe Manana authored
      commit 054570a1 upstream.
      
      During relocation of a data block group we create a relocation tree
      for each fs/subvol tree by making a snapshot of each tree using
      btrfs_copy_root() and the tree's commit root, and then setting the last
      snapshot field for the fs/subvol tree's root to the value of the current
      transaction id minus 1. However this can lead to relocation later
      dropping references that it did not create if we have qgroups enabled,
      leaving the filesystem in an inconsistent state that keeps aborting
      transactions.
      
      Lets consider the following example to explain the problem, which requires
      qgroups to be enabled.
      
      We are relocating data block group Y, we have a subvolume with id 258 that
      has a root at level 1, that subvolume is used to store directory entries
      for snapshots and we are currently at transaction 3404.
      
      When committing transaction 3404, we have a pending snapshot and therefore
      we call btrfs_run_delayed_items() at transaction.c:create_pending_snapshot()
      in order to create its dentry at subvolume 258. This results in COWing
      leaf A from root 258 in order to add the dentry. Note that leaf A
      also contains file extent items referring to extents from some other
      block group X (we are currently relocating block group Y). Later on, still
      at create_pending_snapshot() we call qgroup_account_snapshot(), which
      switches the commit root for root 258 when it calls switch_commit_roots(),
      so now the COWed version of leaf A, lets call it leaf A', is accessible
      from the commit root of tree 258. At the end of qgroup_account_snapshot(),
      we call record_root_in_trans() with 258 as its argument, which results
      in btrfs_init_reloc_root() being called, which in turn calls
      relocation.c:create_reloc_root() in order to create a relocation tree
      associated to root 258, which results in assigning the value of 3403
      (which is the current transaction id minus 1 = 3404 - 1) to the
      last_snapshot field of root 258. When creating the relocation tree root
      at ctree.c:btrfs_copy_root() we add a shared reference for leaf A',
      corresponding to the relocation tree's root, when we call btrfs_inc_ref()
      against the COWed root (a copy of the commit root from tree 258), which
      is at level 1. So at this point leaf A' has 2 references, one normal
      reference corresponding to root 258 and one shared reference corresponding
      to the root of the relocation tree.
      
      Transaction 3404 finishes its commit and transaction 3405 is started by
      relocation when calling merge_reloc_root() for the relocation tree
      associated to root 258. In the meanwhile leaf A' is COWed again, in
      response to some filesystem operation, when we are still at transaction
      3405. However when we COW leaf A', at ctree.c:update_ref_for_cow(), we
      call btrfs_block_can_be_shared() in order to figure out if other trees
      refer to the leaf and if any such trees exists, add a full back reference
      to leaf A' - but btrfs_block_can_be_shared() incorrectly returns false
      because the following condition is false:
      
        btrfs_header_generation(buf) <= btrfs_root_last_snapshot(&root->root_item)
      
      which evaluates to 3404 <= 3403. So after leaf A' is COWed, it stays with
      only one reference, corresponding to the shared reference we created when
      we called btrfs_copy_root() to create the relocation tree's root and
      btrfs_inc_ref() ends up not being called for leaf A' nor we end up setting
      the flag BTRFS_BLOCK_FLAG_FULL_BACKREF in leaf A'. This results in not
      adding shared references for the extents from block group X that leaf A'
      refers to with its file extent items.
      
      Later, after merging the relocation root we do a call to to
      btrfs_drop_snapshot() in order to delete the relocation tree. This ends
      up calling do_walk_down() when path->slots[1] points to leaf A', which
      results in calling btrfs_lookup_extent_info() to get the number of
      references for leaf A', which is 1 at this time (only the shared reference
      exists) and this value is stored at wc->refs[0]. After this walk_up_proc()
      is called when wc->level is 0 and path->nodes[0] corresponds to leaf A'.
      Because the current level is 0 and wc->refs[0] is 1, it does call
      btrfs_dec_ref() against leaf A', which results in removing the single
      references that the extents from block group X have which are associated
      to root 258 - the expectation was to have each of these extents with 2
      references - one reference for root 258 and one shared reference related
      to the root of the relocation tree, and so we would drop only the shared
      reference (because leaf A' was supposed to have the flag
      BTRFS_BLOCK_FLAG_FULL_BACKREF set).
      
      This leaves the filesystem in an inconsistent state as we now have file
      extent items in a subvolume tree that point to extents from block group X
      without references in the extent tree. So later on when we try to decrement
      the references for these extents, for example due to a file unlink operation,
      truncate operation or overwriting ranges of a file, we fail because the
      expected references do not exist in the extent tree.
      
      This leads to warnings and transaction aborts like the following:
      
      [  588.965795] ------------[ cut here ]------------
      [  588.965815] WARNING: CPU: 2 PID: 2479 at fs/btrfs/extent-tree.c:1625 lookup_inline_extent_backref+0x432/0x5b0 [btrfs]
      [  588.965816] Modules linked in: af_packet iscsi_ibft iscsi_boot_sysfs xfs libcrc32c ppdev acpi_cpufreq button tpm_tis e1000 i2c_piix4 pcspkr parport_pc
      parport tpm qemu_fw_cfg joydev btrfs xor raid6_pq sr_mod cdrom ata_generic virtio_scsi ata_piix virtio_pci bochs_drm virtio_ring drm_kms_helper syscopyarea
      sysfillrect sysimgblt fb_sys_fops virtio ttm serio_raw drm floppy sg
      [  588.965831] CPU: 2 PID: 2479 Comm: kworker/u8:7 Not tainted 4.7.3-3-default-fdm+ #1
      [  588.965832] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
      [  588.965844] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs]
      [  588.965845]  0000000000000000 ffff8802263bfa28 ffffffff813af542 0000000000000000
      [  588.965847]  0000000000000000 ffff8802263bfa68 ffffffff81081e8b 0000065900000000
      [  588.965848]  ffff8801db2af000 000000012bbe2000 0000000000000000 ffff880215703b48
      [  588.965849] Call Trace:
      [  588.965852]  [<ffffffff813af542>] dump_stack+0x63/0x81
      [  588.965854]  [<ffffffff81081e8b>] __warn+0xcb/0xf0
      [  588.965855]  [<ffffffff81081f7d>] warn_slowpath_null+0x1d/0x20
      [  588.965863]  [<ffffffffa0175042>] lookup_inline_extent_backref+0x432/0x5b0 [btrfs]
      [  588.965865]  [<ffffffff81143220>] ? trace_clock_local+0x10/0x30
      [  588.965867]  [<ffffffff8114c5df>] ? rb_reserve_next_event+0x6f/0x460
      [  588.965875]  [<ffffffffa0175215>] insert_inline_extent_backref+0x55/0xd0 [btrfs]
      [  588.965882]  [<ffffffffa017531f>] __btrfs_inc_extent_ref.isra.55+0x8f/0x240 [btrfs]
      [  588.965890]  [<ffffffffa017acea>] __btrfs_run_delayed_refs+0x74a/0x1260 [btrfs]
      [  588.965892]  [<ffffffff810cb046>] ? cpuacct_charge+0x86/0xa0
      [  588.965900]  [<ffffffffa017e74f>] btrfs_run_delayed_refs+0x9f/0x2c0 [btrfs]
      [  588.965908]  [<ffffffffa017ea04>] delayed_ref_async_start+0x94/0xb0 [btrfs]
      [  588.965918]  [<ffffffffa01c799a>] btrfs_scrubparity_helper+0xca/0x350 [btrfs]
      [  588.965928]  [<ffffffffa01c7c5e>] btrfs_extent_refs_helper+0xe/0x10 [btrfs]
      [  588.965930]  [<ffffffff8109b323>] process_one_work+0x1f3/0x4e0
      [  588.965931]  [<ffffffff8109b658>] worker_thread+0x48/0x4e0
      [  588.965932]  [<ffffffff8109b610>] ? process_one_work+0x4e0/0x4e0
      [  588.965934]  [<ffffffff810a1659>] kthread+0xc9/0xe0
      [  588.965936]  [<ffffffff816f2f1f>] ret_from_fork+0x1f/0x40
      [  588.965937]  [<ffffffff810a1590>] ? kthread_worker_fn+0x170/0x170
      [  588.965938] ---[ end trace 34e5232c933a1749 ]---
      [  588.966187] ------------[ cut here ]------------
      [  588.966196] WARNING: CPU: 2 PID: 2479 at fs/btrfs/extent-tree.c:2966 btrfs_run_delayed_refs+0x28c/0x2c0 [btrfs]
      [  588.966196] BTRFS: Transaction aborted (error -5)
      [  588.966197] Modules linked in: af_packet iscsi_ibft iscsi_boot_sysfs xfs libcrc32c ppdev acpi_cpufreq button tpm_tis e1000 i2c_piix4 pcspkr parport_pc
      parport tpm qemu_fw_cfg joydev btrfs xor raid6_pq sr_mod cdrom ata_generic virtio_scsi ata_piix virtio_pci bochs_drm virtio_ring drm_kms_helper syscopyarea
      sysfillrect sysimgblt fb_sys_fops virtio ttm serio_raw drm floppy sg
      [  588.966206] CPU: 2 PID: 2479 Comm: kworker/u8:7 Tainted: G        W       4.7.3-3-default-fdm+ #1
      [  588.966207] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
      [  588.966217] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs]
      [  588.966217]  0000000000000000 ffff8802263bfc98 ffffffff813af542 ffff8802263bfce8
      [  588.966219]  0000000000000000 ffff8802263bfcd8 ffffffff81081e8b 00000b96345ee000
      [  588.966220]  ffffffffa021ae1c ffff880215703b48 00000000000005fe ffff8802345ee000
      [  588.966221] Call Trace:
      [  588.966223]  [<ffffffff813af542>] dump_stack+0x63/0x81
      [  588.966224]  [<ffffffff81081e8b>] __warn+0xcb/0xf0
      [  588.966225]  [<ffffffff81081eff>] warn_slowpath_fmt+0x4f/0x60
      [  588.966233]  [<ffffffffa017e93c>] btrfs_run_delayed_refs+0x28c/0x2c0 [btrfs]
      [  588.966241]  [<ffffffffa017ea04>] delayed_ref_async_start+0x94/0xb0 [btrfs]
      [  588.966250]  [<ffffffffa01c799a>] btrfs_scrubparity_helper+0xca/0x350 [btrfs]
      [  588.966259]  [<ffffffffa01c7c5e>] btrfs_extent_refs_helper+0xe/0x10 [btrfs]
      [  588.966260]  [<ffffffff8109b323>] process_one_work+0x1f3/0x4e0
      [  588.966261]  [<ffffffff8109b658>] worker_thread+0x48/0x4e0
      [  588.966263]  [<ffffffff8109b610>] ? process_one_work+0x4e0/0x4e0
      [  588.966264]  [<ffffffff810a1659>] kthread+0xc9/0xe0
      [  588.966265]  [<ffffffff816f2f1f>] ret_from_fork+0x1f/0x40
      [  588.966267]  [<ffffffff810a1590>] ? kthread_worker_fn+0x170/0x170
      [  588.966268] ---[ end trace 34e5232c933a174a ]---
      [  588.966269] BTRFS: error (device sda2) in btrfs_run_delayed_refs:2966: errno=-5 IO failure
      [  588.966270] BTRFS info (device sda2): forced readonly
      
      This was happening often on openSUSE and SLE systems using btrfs as the
      root filesystem (with its default layout where multiple subvolumes are
      used) where balance happens in the background triggered by a cron job and
      snapshots are automatically created before/after package installations,
      upgrades and removals. The issue could be triggered simply by running the
      following loop on the first system boot post installation:
      
        while true; do
           zypper -n in nfs-kernel-server
           zypper -n rm nfs-kernel-server
        done
      
      (If we were fast enough and made that loop before the cron job triggered
      a balance operation and the balance finished)
      
      So fix by setting the last_snapshot field of the root to the value of the
      generation of its commit root. Like this btrfs_block_can_be_shared()
      behaves correctly for the case where the relocation root is created during
      a transaction commit and for the case where it's created before a
      transaction commit.
      
      Fixes: 6426c7ad (btrfs: qgroup: Fix qgroup accounting when creating snapshot)
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Reviewed-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      80f7d283
    • Robbie Ko's avatar
      Btrfs: fix tree search logic when replaying directory entry deletes · f1b268d7
      Robbie Ko authored
      commit 2a7bf53f upstream.
      
      If a log tree has a layout like the following:
      
      leaf N:
              ...
              item 240 key (282 DIR_LOG_ITEM 0) itemoff 8189 itemsize 8
                      dir log end 1275809046
      leaf N + 1:
              item 0 key (282 DIR_LOG_ITEM 3936149215) itemoff 16275 itemsize 8
                      dir log end 18446744073709551615
              ...
      
      When we pass the value 1275809046 + 1 as the parameter start_ret to the
      function tree-log.c:find_dir_range() (done by replay_dir_deletes()), we
      end up with path->slots[0] having the value 239 (points to the last item
      of leaf N, item 240). Because the dir log item in that position has an
      offset value smaller than *start_ret (1275809046 + 1) we need to move on
      to the next leaf, however the logic for that is wrong since it compares
      the current slot to the number of items in the leaf, which is smaller
      and therefore we don't lookup for the next leaf but instead we set the
      slot to point to an item that does not exist, at slot 240, and we later
      operate on that slot which has unexpected content or in the worst case
      can result in an invalid memory access (accessing beyond the last page
      of leaf N's extent buffer).
      
      So fix the logic that checks when we need to lookup at the next leaf
      by first incrementing the slot and only after to check if that slot
      is beyond the last item of the current leaf.
      Signed-off-by: default avatarRobbie Ko <robbieko@synology.com>
      Reviewed-by: default avatarFilipe Manana <fdmanana@suse.com>
      Fixes: e02119d5 (Btrfs: Add a write ahead tree log to optimize synchronous operations)
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      [Modified changelog for clarity and correctness]
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f1b268d7
    • Robbie Ko's avatar
      Btrfs: fix deadlock caused by fsync when logging directory entries · 65553a02
      Robbie Ko authored
      commit ec125cfb upstream.
      
      While logging new directory entries, at tree-log.c:log_new_dir_dentries(),
      after we call btrfs_search_forward() we get a leaf with a read lock on it,
      and without unlocking that leaf we can end up calling btrfs_iget() to get
      an inode pointer. The later (btrfs_iget()) can end up doing a read-only
      search on the same tree again, if the inode is not in memory already, which
      ends up causing a deadlock if some other task in the meanwhile started a
      write search on the tree and is attempting to write lock the same leaf
      that btrfs_search_forward() locked while holding write locks on upper
      levels of the tree blocking the read search from btrfs_iget(). In this
      scenario we get a deadlock.
      
      So fix this by releasing the search path before calling btrfs_iget() at
      tree-log.c:log_new_dir_dentries().
      
      Example trace of such deadlock:
      
      [ 4077.478852] kworker/u24:10  D ffff88107fc90640     0 14431      2 0x00000000
      [ 4077.486752] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
      [ 4077.494346]  ffff880ffa56bad0 0000000000000046 0000000000009000 ffff880ffa56bfd8
      [ 4077.502629]  ffff880ffa56bfd8 ffff881016ce21c0 ffffffffa06ecb26 ffff88101a5d6138
      [ 4077.510915]  ffff880ebb5173b0 ffff880ffa56baf8 ffff880ebb517410 ffff881016ce21c0
      [ 4077.519202] Call Trace:
      [ 4077.528752]  [<ffffffffa06ed5ed>] ? btrfs_tree_lock+0xdd/0x2f0 [btrfs]
      [ 4077.536049]  [<ffffffff81053680>] ? wake_up_atomic_t+0x30/0x30
      [ 4077.542574]  [<ffffffffa068cc1f>] ? btrfs_search_slot+0x79f/0xb10 [btrfs]
      [ 4077.550171]  [<ffffffffa06a5073>] ? btrfs_lookup_file_extent+0x33/0x40 [btrfs]
      [ 4077.558252]  [<ffffffffa06c600b>] ? __btrfs_drop_extents+0x13b/0xdf0 [btrfs]
      [ 4077.566140]  [<ffffffffa06fc9e2>] ? add_delayed_data_ref+0xe2/0x150 [btrfs]
      [ 4077.573928]  [<ffffffffa06fd629>] ? btrfs_add_delayed_data_ref+0x149/0x1d0 [btrfs]
      [ 4077.582399]  [<ffffffffa06cf3c0>] ? __set_extent_bit+0x4c0/0x5c0 [btrfs]
      [ 4077.589896]  [<ffffffffa06b4a64>] ? insert_reserved_file_extent.constprop.75+0xa4/0x320 [btrfs]
      [ 4077.599632]  [<ffffffffa06b206d>] ? start_transaction+0x8d/0x470 [btrfs]
      [ 4077.607134]  [<ffffffffa06bab57>] ? btrfs_finish_ordered_io+0x2e7/0x600 [btrfs]
      [ 4077.615329]  [<ffffffff8104cbc2>] ? process_one_work+0x142/0x3d0
      [ 4077.622043]  [<ffffffff8104d729>] ? worker_thread+0x109/0x3b0
      [ 4077.628459]  [<ffffffff8104d620>] ? manage_workers.isra.26+0x270/0x270
      [ 4077.635759]  [<ffffffff81052b0f>] ? kthread+0xaf/0xc0
      [ 4077.641404]  [<ffffffff81052a60>] ? kthread_create_on_node+0x110/0x110
      [ 4077.648696]  [<ffffffff814a9ac8>] ? ret_from_fork+0x58/0x90
      [ 4077.654926]  [<ffffffff81052a60>] ? kthread_create_on_node+0x110/0x110
      
      [ 4078.358087] kworker/u24:15  D ffff88107fcd0640     0 14436      2 0x00000000
      [ 4078.365981] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
      [ 4078.373574]  ffff880ffa57fad0 0000000000000046 0000000000009000 ffff880ffa57ffd8
      [ 4078.381864]  ffff880ffa57ffd8 ffff88103004d0a0 ffffffffa06ecb26 ffff88101a5d6138
      [ 4078.390163]  ffff880fbeffc298 ffff880ffa57faf8 ffff880fbeffc2f8 ffff88103004d0a0
      [ 4078.398466] Call Trace:
      [ 4078.408019]  [<ffffffffa06ed5ed>] ? btrfs_tree_lock+0xdd/0x2f0 [btrfs]
      [ 4078.415322]  [<ffffffff81053680>] ? wake_up_atomic_t+0x30/0x30
      [ 4078.421844]  [<ffffffffa068cc1f>] ? btrfs_search_slot+0x79f/0xb10 [btrfs]
      [ 4078.429438]  [<ffffffffa06a5073>] ? btrfs_lookup_file_extent+0x33/0x40 [btrfs]
      [ 4078.437518]  [<ffffffffa06c600b>] ? __btrfs_drop_extents+0x13b/0xdf0 [btrfs]
      [ 4078.445404]  [<ffffffffa06fc9e2>] ? add_delayed_data_ref+0xe2/0x150 [btrfs]
      [ 4078.453194]  [<ffffffffa06fd629>] ? btrfs_add_delayed_data_ref+0x149/0x1d0 [btrfs]
      [ 4078.461663]  [<ffffffffa06cf3c0>] ? __set_extent_bit+0x4c0/0x5c0 [btrfs]
      [ 4078.469161]  [<ffffffffa06b4a64>] ? insert_reserved_file_extent.constprop.75+0xa4/0x320 [btrfs]
      [ 4078.478893]  [<ffffffffa06b206d>] ? start_transaction+0x8d/0x470 [btrfs]
      [ 4078.486388]  [<ffffffffa06bab57>] ? btrfs_finish_ordered_io+0x2e7/0x600 [btrfs]
      [ 4078.494561]  [<ffffffff8104cbc2>] ? process_one_work+0x142/0x3d0
      [ 4078.501278]  [<ffffffff8104a507>] ? pwq_activate_delayed_work+0x27/0x40
      [ 4078.508673]  [<ffffffff8104d729>] ? worker_thread+0x109/0x3b0
      [ 4078.515098]  [<ffffffff8104d620>] ? manage_workers.isra.26+0x270/0x270
      [ 4078.522396]  [<ffffffff81052b0f>] ? kthread+0xaf/0xc0
      [ 4078.528032]  [<ffffffff81052a60>] ? kthread_create_on_node+0x110/0x110
      [ 4078.535325]  [<ffffffff814a9ac8>] ? ret_from_fork+0x58/0x90
      [ 4078.541552]  [<ffffffff81052a60>] ? kthread_create_on_node+0x110/0x110
      
      [ 4079.355824] user-space-program D ffff88107fd30640     0 32020      1 0x00000000
      [ 4079.363716]  ffff880eae8eba10 0000000000000086 0000000000009000 ffff880eae8ebfd8
      [ 4079.372003]  ffff880eae8ebfd8 ffff881016c162c0 ffffffffa06ecb26 ffff88101a5d6138
      [ 4079.380294]  ffff880fbed4b4c8 ffff880eae8eba38 ffff880fbed4b528 ffff881016c162c0
      [ 4079.388586] Call Trace:
      [ 4079.398134]  [<ffffffffa06ed595>] ? btrfs_tree_lock+0x85/0x2f0 [btrfs]
      [ 4079.405431]  [<ffffffff81053680>] ? wake_up_atomic_t+0x30/0x30
      [ 4079.411955]  [<ffffffffa06876fb>] ? btrfs_lock_root_node+0x2b/0x40 [btrfs]
      [ 4079.419644]  [<ffffffffa068ce83>] ? btrfs_search_slot+0xa03/0xb10 [btrfs]
      [ 4079.427237]  [<ffffffffa06aba52>] ? btrfs_buffer_uptodate+0x52/0x70 [btrfs]
      [ 4079.435041]  [<ffffffffa0689b60>] ? generic_bin_search.constprop.38+0x80/0x190 [btrfs]
      [ 4079.443897]  [<ffffffffa068ea44>] ? btrfs_insert_empty_items+0x74/0xd0 [btrfs]
      [ 4079.451975]  [<ffffffffa072c443>] ? copy_items+0x128/0x850 [btrfs]
      [ 4079.458890]  [<ffffffffa072da10>] ? btrfs_log_inode+0x629/0xbf3 [btrfs]
      [ 4079.466292]  [<ffffffffa06f34a1>] ? btrfs_log_inode_parent+0xc61/0xf30 [btrfs]
      [ 4079.474373]  [<ffffffffa06f45a9>] ? btrfs_log_dentry_safe+0x59/0x80 [btrfs]
      [ 4079.482161]  [<ffffffffa06c298d>] ? btrfs_sync_file+0x20d/0x330 [btrfs]
      [ 4079.489558]  [<ffffffff8112777c>] ? do_fsync+0x4c/0x80
      [ 4079.495300]  [<ffffffff81127a0a>] ? SyS_fdatasync+0xa/0x10
      [ 4079.501422]  [<ffffffff814a9b72>] ? system_call_fastpath+0x16/0x1b
      
      [ 4079.508334] user-space-program D ffff88107fc30640     0 32021      1 0x00000004
      [ 4079.516226]  ffff880eae8efbf8 0000000000000086 0000000000009000 ffff880eae8effd8
      [ 4079.524513]  ffff880eae8effd8 ffff881030279610 ffffffffa06ecb26 ffff88101a5d6138
      [ 4079.532802]  ffff880ebb671d88 ffff880eae8efc20 ffff880ebb671de8 ffff881030279610
      [ 4079.541092] Call Trace:
      [ 4079.550642]  [<ffffffffa06ed595>] ? btrfs_tree_lock+0x85/0x2f0 [btrfs]
      [ 4079.557941]  [<ffffffff81053680>] ? wake_up_atomic_t+0x30/0x30
      [ 4079.564463]  [<ffffffffa068cc1f>] ? btrfs_search_slot+0x79f/0xb10 [btrfs]
      [ 4079.572058]  [<ffffffffa06bb7d8>] ? btrfs_truncate_inode_items+0x168/0xb90 [btrfs]
      [ 4079.580526]  [<ffffffffa06b04be>] ? join_transaction.isra.15+0x1e/0x3a0 [btrfs]
      [ 4079.588701]  [<ffffffffa06b206d>] ? start_transaction+0x8d/0x470 [btrfs]
      [ 4079.596196]  [<ffffffffa0690ac6>] ? block_rsv_add_bytes+0x16/0x50 [btrfs]
      [ 4079.603789]  [<ffffffffa06bc2e9>] ? btrfs_truncate+0xe9/0x2e0 [btrfs]
      [ 4079.610994]  [<ffffffffa06bd00b>] ? btrfs_setattr+0x30b/0x410 [btrfs]
      [ 4079.618197]  [<ffffffff81117c1c>] ? notify_change+0x1dc/0x680
      [ 4079.624625]  [<ffffffff8123c8a4>] ? aa_path_perm+0xd4/0x160
      [ 4079.630854]  [<ffffffff810f4fcb>] ? do_truncate+0x5b/0x90
      [ 4079.636889]  [<ffffffff810f59fa>] ? do_sys_ftruncate.constprop.15+0x10a/0x160
      [ 4079.644869]  [<ffffffff8110d87b>] ? SyS_fcntl+0x5b/0x570
      [ 4079.650805]  [<ffffffff814a9b72>] ? system_call_fastpath+0x16/0x1b
      
      [ 4080.410607] user-space-program D ffff88107fc70640     0 32028  12639 0x00000004
      [ 4080.418489]  ffff880eaeccbbe0 0000000000000086 0000000000009000 ffff880eaeccbfd8
      [ 4080.426778]  ffff880eaeccbfd8 ffff880f317ef1e0 ffffffffa06ecb26 ffff88101a5d6138
      [ 4080.435067]  ffff880ef7e93928 ffff880f317ef1e0 ffff880eaeccbc08 ffff880f317ef1e0
      [ 4080.443353] Call Trace:
      [ 4080.452920]  [<ffffffffa06ed15d>] ? btrfs_tree_read_lock+0xdd/0x190 [btrfs]
      [ 4080.460703]  [<ffffffff81053680>] ? wake_up_atomic_t+0x30/0x30
      [ 4080.467225]  [<ffffffffa06876bb>] ? btrfs_read_lock_root_node+0x2b/0x40 [btrfs]
      [ 4080.475400]  [<ffffffffa068cc81>] ? btrfs_search_slot+0x801/0xb10 [btrfs]
      [ 4080.482994]  [<ffffffffa06b2df0>] ? btrfs_clean_one_deleted_snapshot+0xe0/0xe0 [btrfs]
      [ 4080.491857]  [<ffffffffa06a70a6>] ? btrfs_lookup_inode+0x26/0x90 [btrfs]
      [ 4080.499353]  [<ffffffff810ec42f>] ? kmem_cache_alloc+0xaf/0xc0
      [ 4080.505879]  [<ffffffffa06bd905>] ? btrfs_iget+0xd5/0x5d0 [btrfs]
      [ 4080.512696]  [<ffffffffa06caf04>] ? btrfs_get_token_64+0x104/0x120 [btrfs]
      [ 4080.520387]  [<ffffffffa06f341f>] ? btrfs_log_inode_parent+0xbdf/0xf30 [btrfs]
      [ 4080.528469]  [<ffffffffa06f45a9>] ? btrfs_log_dentry_safe+0x59/0x80 [btrfs]
      [ 4080.536258]  [<ffffffffa06c298d>] ? btrfs_sync_file+0x20d/0x330 [btrfs]
      [ 4080.543657]  [<ffffffff8112777c>] ? do_fsync+0x4c/0x80
      [ 4080.549399]  [<ffffffff81127a0a>] ? SyS_fdatasync+0xa/0x10
      [ 4080.555534]  [<ffffffff814a9b72>] ? system_call_fastpath+0x16/0x1b
      Signed-off-by: default avatarRobbie Ko <robbieko@synology.com>
      Reviewed-by: default avatarFilipe Manana <fdmanana@suse.com>
      Fixes: 2f2ff0ee (Btrfs: fix metadata inconsistencies after directory fsync)
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      [Modified changelog for clarity and correctness]
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      65553a02
    • Liu Bo's avatar
      Btrfs: fix BUG_ON in btrfs_mark_buffer_dirty · 361e8213
      Liu Bo authored
      commit ef85b25e upstream.
      
      This can only happen with CONFIG_BTRFS_FS_CHECK_INTEGRITY=y.
      
      Commit 1ba98d08 ("Btrfs: detect corruption when non-root leaf has zero item")
      assumes that a leaf is its root when leaf->bytenr == btrfs_root_bytenr(root),
      however, we should not use btrfs_root_bytenr(root) since it's mainly got
      updated during committing transaction.  So the check can fail when doing
      COW on this leaf while it is a root.
      
      This changes to use "if (leaf == btrfs_root_node(root))" instead, just like
      how we check whether leaf is a root in __btrfs_cow_block().
      
      Fixes: 1ba98d08 (Btrfs: detect corruption when non-root leaf has zero item)
      Reported-by: default avatarJeff Mahoney <jeffm@suse.com>
      Signed-off-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      Reviewed-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      361e8213
    • Maxim Patlasov's avatar
      btrfs: limit async_work allocation and worker func duration · 562de9c7
      Maxim Patlasov authored
      commit 2939e1a8 upstream.
      
      Problem statement: unprivileged user who has read-write access to more than
      one btrfs subvolume may easily consume all kernel memory (eventually
      triggering oom-killer).
      
      Reproducer (./mkrmdir below essentially loops over mkdir/rmdir):
      
      [root@kteam1 ~]# cat prep.sh
      
      DEV=/dev/sdb
      mkfs.btrfs -f $DEV
      mount $DEV /mnt
      for i in `seq 1 16`
      do
      	mkdir /mnt/$i
      	btrfs subvolume create /mnt/SV_$i
      	ID=`btrfs subvolume list /mnt |grep "SV_$i$" |cut -d ' ' -f 2`
      	mount -t btrfs -o subvolid=$ID $DEV /mnt/$i
      	chmod a+rwx /mnt/$i
      done
      
      [root@kteam1 ~]# sh prep.sh
      
      [maxim@kteam1 ~]$ for i in `seq 1 16`; do ./mkrmdir /mnt/$i 2000 2000 & done
      
      [root@kteam1 ~]# for i in `seq 1 4`; do grep "kmalloc-128" /proc/slabinfo | grep -v dma; sleep 60; done
      kmalloc-128        10144  10144    128   32    1 : tunables    0    0    0 : slabdata    317    317      0
      kmalloc-128       9992352 9992352    128   32    1 : tunables    0    0    0 : slabdata 312261 312261      0
      kmalloc-128       24226752 24226752    128   32    1 : tunables    0    0    0 : slabdata 757086 757086      0
      kmalloc-128       42754240 42754240    128   32    1 : tunables    0    0    0 : slabdata 1336070 1336070      0
      
      The huge numbers above come from insane number of async_work-s allocated
      and queued by btrfs_wq_run_delayed_node.
      
      The problem is caused by btrfs_wq_run_delayed_node() queuing more and more
      works if the number of delayed items is above BTRFS_DELAYED_BACKGROUND. The
      worker func (btrfs_async_run_delayed_root) processes at least
      BTRFS_DELAYED_BATCH items (if they are present in the list). So, the machinery
      works as expected while the list is almost empty. As soon as it is getting
      bigger, worker func starts to process more than one item at a time, it takes
      longer, and the chances to have async_works queued more than needed is getting
      higher.
      
      The problem above is worsened by another flaw of delayed-inode implementation:
      if async_work was queued in a throttling branch (number of items >=
      BTRFS_DELAYED_WRITEBACK), corresponding worker func won't quit until
      the number of items < BTRFS_DELAYED_BACKGROUND / 2. So, it is possible that
      the func occupies CPU infinitely (up to 30sec in my experiments): while the
      func is trying to drain the list, the user activity may add more and more
      items to the list.
      
      The patch fixes both problems in straightforward way: refuse queuing too
      many works in btrfs_wq_run_delayed_node and bail out of worker func if
      at least BTRFS_DELAYED_WRITEBACK items are processed.
      
      Changed in v2: remove support of thresh == NO_THRESHOLD.
      Signed-off-by: default avatarMaxim Patlasov <mpatlasov@virtuozzo.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      562de9c7
    • Jens Axboe's avatar
      aoe: fix crash in page count manipulation · f080d709
      Jens Axboe authored
      commit 0cbc72a1 upstream.
      
      aoeblk contains some mysterious code, that wants to elevate the bio
      vec page counts while it's under IO. That is not needed, it's
      fragile, and it's causing kernel oopses for some.
      Reported-by: default avatarTested-by: Don Koch <kochd@us.ibm.com>
      Tested-by: default avatarTested-by: Don Koch <kochd@us.ibm.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f080d709
  2. 15 Dec, 2016 16 commits