This reverts commit 241b5fefc54eae95239b0f7dc4e2b0db49457729 as it's
wrong, we want to insert into the correct place in the list.
Reported-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This reverts commit 57131bf309d34568dd3b8f8e9da7a7ba25e9495e, it isn't
going to be needed as the patch this fixes will be reverted.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

'gb_i2c_transfer_request' is the name given to a function and a struct. Though
we don't get any compilation errors/warnings about it, but the names should be
unique.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

'gb_i2c_transfer_response' is the name given to a function and a struct. Though
we don't get any compilation errors/warnings about it, but the names should be
unique.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

__gb_protocol_register check if the protocol is not already registred,
and then register it. It register in existing->lists but at this point,
existing is always NULL (we exist just before if not).
Use gb_protocols instead.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

These aren't used anymore and so can be removed.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This gets rid of lots of duplication of code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Request type for all other protocols is defined like: GB_<protocol>_TYPE_<operation>,
but for UART is like: GB_<protocol>_REQ_<operation>.

Replace REQ with TYPE to make it consistent. It will also be useful in a later
patch that creates get_version() routines with the help of a macro.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Some files are still prefixed with "gb-" with the reasoning that the modules
would be named so, i.e.  gb-*.ko. But this can be done by playing a bit in
Makefile instead and keep uniform naming of .c files.

Lets try it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Some files are prefixed with "gb-" and some are suffixed with "-gb". The
rationale behind the first one is that the modules would be named so, i.e.
gb-*.ko. But there is no reason to keep the "-gb" suffix in the second case.

Remove the unnecessary suffix.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This is just a copy of ES1 for now, things will start to diverge soon.
Any common functionality will be factored out over time.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

In next_free_urb(), just return usb_alloc_urb(), don't waste the time
assigning it to a local variable that we then return.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

in protocol register replace the protocol find code with the call to the already
existing function.
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

if error is return when submiting the urb, we need to make sure to release the
urb from the pool, or from the dinamicly allocated. As in it, factor out the free
code and create the free_urb function.
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

just return the result of usb_alloc_urb up, no need to rededunt check for NULL
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

An extra reference is taken out on an operation in
gb_operation_request_send(). If the response never arrives, we need to
put back the reference.
Signed-off-by: Perry Hung <perry@leaflabs.com>
Tested-by: Mitchell Tasman <tasman@leaflabs.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

If an operation is issued and the response never comes back,
gb_operation_timeout() cancels the operation but never wakes up the
waiter in gb_operation_request_send().

This patch removes the timeout workqueue and changes the request wait to
wait_for_completion_interruptible_timeout(), with timeout set to
OPERATION_TIMEOUT_DEFAULT.
Signed-off-by: Perry Hung <perry@leaflabs.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

offset is defined as unsigned so there is no point checking for
negative values of offset.
Signed-off-by: Bill Pemberton <wfp5p@worldbroken.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Bill Pemberton <wfp5p@worldbroken.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

val is an unsigned long so there is no point in checking if it is less
than zero.
Signed-off-by: Bill Pemberton <wfp5p@worldbroken.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This .c file isn't needed by the kernel driver, it's there for firmware
developers only, so just move it into the Documentation directory to
reduce confusion.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

Use the "gb-" prefix for the ES1 Host controller driver.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

Use the "gb" prefix for module names, not a suffix.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

Use the "gb" prefix for module names, not a suffix.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

This module provides the Bridged PHY protocols, so name the thing
properly.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

Provide an install Makefile target for those that want to install the
kernel modules.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

--
v3: resend to list, somehow this thread got taken private and v2 never
    made it there.

v2: add -a option to depmod, thanks to Mitchell

The data_in_size variable was set to 1 for the status byte.
But now, the status byte has move to header. Then, the status byte
is "allocated" twice and cause bad message size error.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Right now some sysfs attributes have \n and some do not, so fix that and
put \n at the end of all of them to make it easier to parse things
properly in userspace.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

When removing a connection with no protocol assigned to it, the kernel
oopses as we always thought protocols were always there.

Fix that problem, oopses are bad.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We want to be able to "blame" a protocol for things at times, so give
them a name we can refer to them by.  Announce when they are added or
removed from the system so we have a chance to know what is going on
in the kernel logs.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

Use the list that the driver core keeps of our structure, no need to
duplicate it with a local list as well.  This gets rid of a static lock
too, always a nice thing to do.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

The i2c protocol belongs in the gpbridge driver, so move it
there.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

This bundles together the existing GP Bridged PHY protocols that were
part of the Greybus core: USB, UART, SDIO, PWM, and GPIO.  This is now a
stand-alone kernel module.  More logic will be moving here in the future
to handle bridged devices.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

This moves the battery class protocol to be a stand-alone kernel module.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We can't use the gb_protocol_driver() macro here as we need to do some
init and exit logic when loading and removing, so "open code" the module
init and exit functions.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

Now that protocols can be in a module, we need to reference count them
to lock them into memory so they can't be removed while in use.  So add
a module owner structure, and have it automatically be assigned when
registering the protocol.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

Use a "name" for when we don't have a valid device id yet, instead of a
magic value of 0xff.
Reported-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

This splits the i2c-gb protocol into a stand-alone kernel module.

It's not going to stay in this fashion for long, this was done to test
the "can a protcol be loaded later" logic.  Future refactoring is going
to move the gpbridge protocols to a separate kernel module, where this
protocol is going to live.

But for now, split it out, it is good to test with, and shows a bug in
gbsim at the moment.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

When adding a new protocol to the system, walk all bundles and try to
hook up any connections that do not have a protocol already.  This sets
the stage to allow for protocols to be loaded at any time, not just
before the device is seen in the system.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Protocol handlers need some greybus symbols, so export them so that they
can be built outside of the greybus core.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>