- 12 Feb, 2016 40 commits
-
-
Hari Prasath Gujulan Elango authored
Prefer using the eth_broadcast_addr() instead of memset to broadcast address 0xFF to the array. Signed-off-by:
Hari Prasath Gujulan Elango <hgujulan@visteon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrew Bradford authored
RTL8188E can only have a maximum of 2 chains so match that in the actual phy_rx_agc_info structure within phy_status_rpt. This will cause the other data received from the PHY, such as signal strength indication of beacons, to properly align and allow extraction and use within the signal strength record-keeping mechanisms. Signed-off-by:
Andrew Bradford <andrew@bradfordembedded.com> Signed-off-by:
-
Ivan Safonov authored
Small memory leak fixed. Signed-off-by:
Ivan Safonov <insafonov@gmail.com> Signed-off-by:
-
Ivan Safonov authored
The pfirmware is used only in rtl88eu_download_fw function (except the kfree(rtlhal->pfirmware) in netdev_close). The fwsize not used after initialization at all. The pfirmvare replaced by fw_data and fwsize removed. Signed-off-by:
-
Ivan Safonov authored
The _rtl88e_fill_dummy function replaced by memset in rtl88eu_download_fw. More appropriate names are used for pfwdata and fwsize variables (download_data and download_size respectively). Also u32 replaced by size_t for download_size variable. Signed-off-by:
-
Janani Ravichandran authored
Remove unnecessary pointer cast. Issue found using the following Coccinelle semantic patch. @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by:
Janani Ravichandran <janani.rvchndrn@gmail.com> Signed-off-by:
-
Janani Ravichandran authored
Use ARRAY_SIZE to calculate the size of an array to make code concise. The semantic patch used can be found here: https://github.com/coccinelle/coccinellery/commit/9cbab452a3a2e18439e8386d6c4a68ee42c3ee2bSigned-off-by:
-
Haneen Mohammed authored
This patch checks for dma_mapping_error() after using dma_map_single. If the dma map fails we release skb buff allocated by dev_alloc_skb() to avoid possible causes of resource leak. Signed-off-by:
Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by:
-
Alison Schofield authored
Replace explicit NULL comparison with ! operator to simplify code. Found with Coccinelle: @@ expression e; statement s0, s1; @@ if ( ( + ! e - == NULL || ... ) ) s0 else s1 Signed-off-by:
Alison Schofield <amsfield22@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Janani Ravichandran authored
Remove parentheses around the right hand side of assignment statements as they are not needed. Semantic patch: @@ expression a, b, c; @@ ( a = (b == c) | a = - ( b - ) ) Signed-off-by:
-
Alison Schofield authored
Simplify function returns by merging assignment and return into one command line. Found with Coccinelle @@ expression e, ret; @@ -ret = +return e; -return ret; Signed-off-by:
-
Alison Schofield authored
Simplify function return by merging assignment and return into one command line. Remove (now) unused local variable. Found using Coccinelle: @@ expression e, ret; @@ -ret = +return e; -return ret; Signed-off-by:
-
Janani Ravichandran authored
This patch removes commented out code as it contributes to code clutter. Signed-off-by:
-
Eva Rachel Retuya authored
Omit the whitespace after '{' brace as suggested by checkpatch. CHECK: Blank lines aren't necessary after an open brace '{' Signed-off-by:Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by:
-
Eva Rachel Retuya authored
Insert the required whitespace after the function declaration as suggested by checkpatch. CHECK: Please use a blank line after function/struct/union/enum declarations Signed-off-by:
-
Eva Rachel Retuya authored
Fix alignment issues by properly indenting function parameters in accordance to the kernel coding style. Checkpatch pointed out this issue. CHECK: Alignment should match open parenthesis Signed-off-by:
-
Eva Rachel Retuya authored
Add the required trailing * on subsequent lines as well as move the */ on a separate line. Checkpatch found this issue. Signed-off-by:
-
Mike Rapoport authored
Use stratight-forward defintion of PANEL_HORIZONTAL_TOTAL register fields and use open-coded implementation for register manipulations Signed-off-by:
Mike Rapoport <mike.rapoport@gmail.com> Signed-off-by:
-
Mike Rapoport authored
Replace complex definition of I2C_STATUS register fields with BIT() macro and use open-coded implementation for register manipulation Signed-off-by:
-
Mike Rapoport authored
Replace complex definition of I2C_CTRL register fields with BIT() macro and use open-coded implementation for register manipulation Signed-off-by:
-
Mike Rapoport authored
Use more straight-forward definitions for multi-bit fields of CRT_DISPLAY_CTRL register and use open-coded implementation for register manipulation Signed-off-by:
-
Mike Rapoport authored
Replace complex definition of CRT_DISPLAY_CTRL register fields with BIT() macro and use open-coded implementation for register manipulation Signed-off-by:
-
Mike Rapoport authored
Replace complex definition of DMA_ABORT_INTERRUPT register fields with BIT() macro and use open-coded implementation for register manipulation Signed-off-by:
-
Mike Rapoport authored
Use stratight-forward defintion of PANEL_PLANE_BR register fields and use open-coded implementation for register manipulations Signed-off-by:
-
Mike Rapoport authored
Use stratight-forward defintion of PANEL_PLANE_TL register fields Signed-off-by:
-
Mike Rapoport authored
Use stratight-forward defintion of PANEL_WINDOW_HEIGHT register fields and use open-coded implementation for register manipulations Signed-off-by:
-
Mike Rapoport authored
Use stratight-forward defintion of PANEL_WINDOW_WIDTH register fields and use open-coded implementation for register manipulations Signed-off-by:
-
Mike Rapoport authored
Use stratight-forward defintion of PANEL_FB_WIDTH register fields and use open-coded implementation for register manipulations Signed-off-by:
-
Mike Rapoport authored
Use BIT() macro for single-bit fields of PANEL_FB_ADDRESS register and define PANEL_FB_ADDRESS_ADDRESS_MASK for masking the address bits. Signed-off-by:
-
Mike Rapoport authored
Use more straight-forward definitions for multi-bit fields of PANEL_DISPLAY_CTRL register and use open-coded implementation for register manipulation Signed-off-by:
-
Mike Rapoport authored
The PANEL_DISPLAY_CTRL_TFT_DISP definitions artificially encode PANEL_DISPLAY_CTRL_DUAL_DISPLAY and PANEL_DISPLAY_CTRL_DOUBLE_PIXEL bits combinations. Replace the PANEL_DISPLAY_CTRL_TFT_DISP usage with direct use of the bits defined in the datasheet. Signed-off-by:
-
Mike Rapoport authored
Replace complex definition of PANEL_DISPLAY_CTRL register fields with BIT() macro and use open-coded implementation for register manipulations. Signed-off-by:
-
Mike Rapoport authored
pr_debug would be enough Signed-off-by:
-
Mike Rapoport authored
The enable/disbable sequence in setDisplayControl function is duplicated for primary and secondary display controllers. The function can be refactored so that the common part of register access will be shared for both controllers. Signed-off-by:
-
Mike Rapoport authored
Use single mask for reserved bits in PANEL_DISPLAY_CTRL and CRT_DISPLAY_CTRL registers. Signed-off-by:
-
Mike Rapoport authored
The display control registers for primary and secondary display share some of the bits and those bits can be defined in a single place and then used for manipulations of the relevant registers. Signed-off-by:
-
Mike Rapoport authored
Remove HungarianCamelCase notation. Signed-off-by:
-
Mike Rapoport authored
Remove HungarianCamelCase notation. Signed-off-by:
-
Mike Rapoport authored
Use more straight-forward definitions for multi-bit field of VGA_CONFIGURATION register. Signed-off-by:
-
Mike Rapoport authored
Replace complex defintion of VGA_CONFIGURATION register fields with BIT() macro and use open-coded implementation for VGA_CONFIGURATION manipulations. Signed-off-by:
-
