- 02 Mar, 2018 6 commits
-
-
Jernej Skrabec authored
DW HDMI PHY macros are moved to header file and expanded with the registers present on newer SoCs like H3 and H5. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-12-jernej.skrabec@siol.net
-
Jernej Skrabec authored
There are multiple variants of DW HDMI PHYs in Allwinner SoCs. While some things like clock and reset setup are the same, PHY configuration differs a lot. Split out code which is PHY specific to separate functions and create a structure which holds pointers to those functions. Signed-off-by:
-
Jernej Skrabec authored
Current polarity configuration code is cleary wrong since it compares same flag two times. However, even if flag name is fixed, it won't work well for resolutions which have one polarity positive and another negative. Fix that by properly set each bit according to each polarity. Since those two bits are not described in any documentation, relationships were obtained by experimentation. Fixes: b7c7436a ("drm/sun4i: Implement A83T HDMI driver") Signed-off-by:
-
Jernej Skrabec authored
This mixer supports 1 VI plane, 3 UI plane and HW scaling on all planes. Signed-off-by:
-
Jernej Skrabec authored
H3 display engine has two mixers which are connected to HDMI and TV output. Signed-off-by:
-
Jernej Skrabec authored
Add missing compatibles for H3 HDMI pipeline. These compatibles can also be used with H5 SoC. Signed-off-by:
-
- 01 Mar, 2018 6 commits
-
-
Jeffy Chen authored
In bind the psr handler gets registered first before the core analogix_dp_bind() gets called. So it should be the other way around in unbind, first unbind the analogix_dp and then unregister the psr. Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
Thierry Escande <thierry.escande@collabora.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/76025075.yWNtk1v57f@phil
-
Jeffy Chen authored
The rockchip_drm_psr_register() can fail, so add a sanity check for that. Signed-off-by:
-
Jeffy Chen authored
Since we are initing connector in the core driver and encoder in the plat driver, let's clean them up in the right places. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Jeffy Chen authored
The driver that instantiates the bridge should own the drvdata, as all driver model callbacks (probe, remove, shutdown, PM ops, etc.) are also owned by its driver struct. Moreover, storing two different pointer types in driver data depending on driver initialization status is barely a good practice and in fact has led to many bugs in this driver. Let's clean up this mess and change Analogix entry points to simply accept some opaque struct pointer, adjusting their users at the same time to avoid breaking the compilation. Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Acked-by:
Jingoo Han <jingoohan1@gmail.com> Acked-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
-
Jeffy Chen authored
Currently we are calling scl_vop_cal_scale() to get vskiplines for yrgb and cbcr. So the cbcr's vskiplines might be an unexpected value if the second scl_vop_cal_scale() didn't update it. Init vskiplines in scl_vop_cal_scale() to avoid that. Signed-off-by:
-
Jeffy Chen authored
Since we are trying to access components' resources in the master's suspend/resume PM callbacks(e.g. panel), add device links to correct the suspend/resume and shutdown ordering. Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
- 28 Feb, 2018 2 commits
-
-
Arnd Bergmann authored
Calling devm_of_find_backlight directly means we get a link failure without CONFIG_BACKLIGHT_CLASS_DEVICE: drivers/gpu/drm/tinydrm/mi0283qt.o: In function `mi0283qt_probe': mi0283qt.c:(.text+0x684): undefined reference to `devm_of_find_backlight' This adds an explicit Kconfig dependency for it. While I did not observe that failure for st7735r, I assume the same change is needed there for the same reason. Fixes: d1a2e700 ("drm/tinydrm: Replace tinydrm_of_find_backlight with of_find_backlight") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Ville Syrjälä authored
The documentation for the ctm matrix suggests a two's complement format, but at least the i915 implementation is using sign-magnitude instead. And looks like malidp is doing the same. Change the docs to match the current implementation, and change the type from __s64 to __u64 to drive the point home. Cc: dri-devel@lists.freedesktop.org Cc: Mihail Atanassov <mihail.atanassov@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Johnson Lin <johnson.lin@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-1-ville.syrjala@linux.intel.comReviewed-by:
Harry Wentland <harry.wentland@amd.com>
-
- 27 Feb, 2018 7 commits
-
-
Rodrigo Siqueira authored
This patch fixes the checkpatch.pl check: virtgpu_ioctl.c:535: CHECK: spaces preferred around that '|' (ctx:VxV) virtgpu_vq.c:277: CHECK: spaces preferred around that '+' (ctx:VxV) ... Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by:
Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/8402b55696b44483ba2e1f6aaeb53bf709ffbfe7.1519343668.git.rodrigosiqueiramelo@gmail.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Rodrigo Siqueira authored
This patch fixes the checkpatch.pl check: virtgpu_drv.c:116: CHECK: Please don't use multiple blank lines virtgpu_vq.c:599: CHECK: Please don't use multiple blank lines virtgpu_prime.c:42: CHECK: Please don't use multiple blank lines Signed-off-by:
-
Rodrigo Siqueira authored
This patch fixes the checkpatch.pl warning: drivers/gpu/drm/virtio/virtgpu_display.c:64: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' ... Signed-off-by:
-
Rodrigo Siqueira authored
This patch fixes the checkpatch.pl warning: virtgpu_ttm.c:181: WARNING: void function return statements are not generally useful ... Signed-off-by:
-
Rodrigo Siqueira authored
This patch fixes the checkpatch.pl warning: virtgpu_ioctl.c:551: WARNING: Block comments use a trailing */ on a separate line ... Signed-off-by:
-
Rodrigo Siqueira authored
This patch fixes the checkpatch.pl warnings: virtgpu_drv.c:57: WARNING: Missing a blank line after declarations virtgpu_display.c:99: WARNING: Missing a blank line after declarations ... Signed-off-by:
-
Rodrigo Siqueira authored
This patch fixes the checkpatch.pl errors: drivers/gpu/drm/virtio/virtgpu_drv.h:371: ERROR: code indent should use tabs where possible ... Signed-off-by:
-
- 26 Feb, 2018 4 commits
-
-
Ville Syrjälä authored
sparse complains: drivers/gpu/drm/drm_panel_orientation_quirks.c:133:5: warning: symbol 'drm_get_panel_orientation_quirk' was not declared. Should it be static? Cc: Hans de Goede <hdegoede@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Hans de Goede <hdegoede@redhat.com>
-
Ville Syrjälä authored
The core now checks that the plane supports the fb's format+modifier combination, so we can drop the related checks from skl_check_ccs_aux_surface(). These checks were specific to SKL/KBL/BXT anyway. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by:
Mika Kahola <mika.kahola@intel.com>
-
Ville Syrjälä authored
Currently we only check that the plane supports the pixel format of the fb we're about to feed to it. Extend it to check also the modifier, and more specifically that the combination of the format and modifier is supported. Cc: dri-devel@lists.freedesktop.org Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Thierry Reding authored
DRM_DUMB_VGA_DAC is a user-visible symbol. Selecting it can cause unmet direct dependencies such as this (on i386, randconfig): warning: (DRM_PL111) selects DRM_DUMB_VGA_DAC which has unmet direct dependencies (HAS_IOMEM && DRM && DRM_BRIDGE && OF) This is because DRM_DUMB_VGA_DAC depends on OF while DRM_PL111 does not. It does indirectly depend on OF via the ARM and ARM64 dependencies, but since it can also be enabled under COMPILE_TEST, randconfig can find a case where DRM_PL111 is selected without pulling in OF and not meeting the dependency for DRM_DUMB_VGA_DAC. Since select is "heavy handed", DRM_DUMB_VGA_DAC is going to be enabled regardless of the above warning and causes the following build error: ../drivers/gpu/drm/bridge/dumb-vga-dac.c: In function 'dumb_vga_probe': ../drivers/gpu/drm/bridge/dumb-vga-dac.c:207:13: error: 'struct drm_bridge' has no member named 'of_node' vga->bridge.of_node = pdev->dev.of_node; See Documentation/kbuild/kconfig-language.txt, "reverse dependencies". Fixes: 49f81d80 ("drm/pl111: Support handling bridge timings") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Archit Taneja <archit@cradlewise.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220102903.27787-1-thierry.reding@gmail.com
-
- 23 Feb, 2018 1 commit
-
-
Benjamin Gaignard authored
In all cases we have to check pitch and size calculations to speed up data transfer. Fixes: 21f815bf ("drm/stm: drv: Improve data transfers") Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Tested-by:
Philippe Cornu <philippe.cornu@st.com> Reviewed-by:
-
- 22 Feb, 2018 11 commits
-
-
Linus Walleij authored
These clocks are in kHz not in Hz, oops. Fix it so my new bandwidth calculations patch starts working with these panels. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180211103840.18764-1-linus.walleij@linaro.org
-
Oleksandr Andrushchenko authored
Do not use deprecated drm_driver.{enable|disable)_vblank callbacks, but use drm_simple_kms_helpe's pipe callbacks instead. Signed-off-by:Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by:
-
Oleksandr Andrushchenko authored
Do not use deprecated drm_driver.{enable|disable)_vblank callbacks, but use drm_simple_kms_helpe's pipe callbacks instead. Signed-off-by: -
Oleksandr Andrushchenko authored
Do not use deprecated drm_driver.{enable|disable)_vblank callbacks, but use drm_simple_kms_helpe's pipe callbacks instead. Signed-off-by:Marek Vasut <marex@denx.de> Signed-off-by:
-
Oleksandr Andrushchenko authored
If simple_kms_helper based driver needs to work with vblanks, then it has to provide drm_driver.{enable|disable}_vblank callbacks, because drm_simple_kms_helper.drm_crtc_funcs does not provide any. At the same time drm_driver.{enable|disable}_vblank callbacks are marked as deprecated and shouldn't be used by new drivers. Fix this by extending drm_simple_kms_helper.drm_crtc_funcs to provide the missing callbacks. Signed-off-by: -
Arnd Bergmann authored
When comparing two variables with min()/max(), they should be the same type: drivers/gpu/drm/drm_memory.c: In function 'drm_get_max_iomem': include/linux/kernel.h:821:16: error: comparison of distinct pointer types lacks a cast [-Werror] (void) (&max1 == &max2); This makes the local variable in drm_get_max_iomem make the type from resource->end. Fixes: 82626363 ("drm: add func to get max iomem address v2") Signed-off-by:
-
Oleksandr Andrushchenko authored
It is possible that drm_simple_kms_plane_atomic_check called with no CRTC set, e.g. when user-space application sets CRTC_ID/FB_ID to 0 before doing any actual drawing. This leads to NULL pointer dereference because in this case new CRTC state is NULL and must be checked before accessing. Signed-off-by:
-
Maxime Ripard authored
We've had some code for quite some time to prevent the alpha bug from happening on the lowest primary plane. Since we now check for this in our atomic_check, we can simply remove it. Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Maxime Ripard authored
Now that we have everything in place, we can make zpos configurable now. Change the zpos property from an immutable one to a regular. Reviewed-by:
-
Maxime Ripard authored
The plane description structure was mostly needed to differentiate the formats usable on the primary plane (because of its lowest position), and assign the pipes. Now that both are dynamically checked and assigned, we can remove the static definition. Reviewed-by:
-
Maxime Ripard authored
Since we now have a way to enforce the zpos, check for the number of alpha planes, the only missing part is to assign our pipe automatically instead of hardcoding it. The algorithm is quite simple, but requires two iterations over the list of planes. In the first one (which is the same one that we've had to check for alpha, the frontend usage, and so on), we order the planes by their zpos. We can then do a second iteration over that array by ascending zpos starting with the pipe 0. When and if we encounter our alpha plane, we put it and all the other subsequent planes in the second pipe. Reviewed-by:
-
- 20 Feb, 2018 3 commits
-
-
Chris Wilson authored
When we descend the tree to find our slot, if we step to the right, we are no longer the leftmost node. Fixes: f808c13f ("lib/interval_tree: fast overlap detection") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> for now. Link: https://patchwork.freedesktop.org/patch/msgid/20180220093738.1461-1-chris@chris-wilson.co.uk
-
Meghana Madhyastha authored
Replace of_find_backlight_by_node and of the code around it with of_find_backlight helper to avoid repetition of code. Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by:
-
Meghana Madhyastha authored
Replace of_find_backlight_by_node and of the code around it with of_find_backlight helper to avoid repetition of code. Reviewed-by:
-
