- 29 Jul, 2017 15 commits
-
-
SZ Lin authored
Remove unnecessary braces from single-line if statement This warning is found using checkpatch.pl Signed-off-by:
SZ Lin <sz.lin@moxa.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: get rid of unsafe_global_rkey The smc code uses the unsafe_global_rkey, exposing all memory for remote reads and writes once a connection is established. Here is now a patch series to get rid of unsafe_global_rkey usage. Main idea is to switch to SG-logic and separate memory regions for RMBs. ==================== Signed-off-by: -
Ursula Braun authored
Usage of send buffer "sndbuf" is synced (a) before filling sndbuf for cpu access (b) after filling sndbuf for device access Usage of receive buffer "RMB" is synced (a) before reading RMB content for cpu access (b) after reading RMB content for device access Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
-
Ursula Braun authored
Split function __smc_buf_create() for better readability. Signed-off-by:
-
Ursula Braun authored
Creation and deletion of SMC receive and send buffers shares a high amount of common code . This patch introduces common functions to get rid of duplicate code. Signed-off-by:
-
Ursula Braun authored
SMC send buffers are processed the same way as RMBs. Since RMBs have been converted to sg-logic, do the same for send buffers. Signed-off-by:
-
Ursula Braun authored
Now separate memory regions are created and registered for separate RMBs. The unsafe_global_rkey of the protection domain is no longer used. Thus the exposing memory warning can be removed. Signed-off-by:
-
Ursula Braun authored
A memory region created for a new RMB must be registered explicitly, before the peer can make use of it for remote DMA transfer. Signed-off-by:
-
Ursula Braun authored
SMC currently uses the unsafe_global_rkey of the protection domain, which exposes all memory for remote reads and writes once a connection is established. This patch introduces separate memory regions with separate rkeys for every RMB. Now the unsafe_global_rkey of the protection domain is no longer needed. Signed-off-by:
-
Ursula Braun authored
The follow-on patch makes use of ib_map_mr_sg() when introducing separate memory regions for RMBs. This function is based on scatterlists; thus this patch introduces scatterlists for RMBs. Signed-off-by:
-
Ursula Braun authored
Initiate the coming rework of SMC buffer handling with this small code cleanup. No functional changes here. Signed-off-by:
-
Ursula Braun authored
If a link group for a new server connection exists already, the mutex serializing the determination of link groups is given up early. The coming registration of memory regions benefits from the serialization as well, if the mutex is held till connection creation is finished. This patch postpones the unlocking of the link group creation mutex. Signed-off-by:
-
David S. Miller authored
Julia Lawall says: ==================== constify inet6_protocol structures The inet6_protocol structure is only passed as the first argument to inet6_add_protocol or inet6_del_protocol, both of which are declared as const. Thus the inet6_protocol structure itself can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct inet6_protocol i@p = { ... }; @ok1@ identifier r.i; expression e1; position p; @@ \(inet6_add_protocol\|inet6_del_protocol\)(&i@p,...) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct inet6_protocol e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct inet6_protocol i = { ... }; // </smpl> ==================== Signed-off-by: -
Julia Lawall authored
The inet6_protocol structure is only passed as the first argument to inet6_add_protocol or inet6_del_protocol, both of which are declared as const. Thus the inet6_protocol structure itself can be const. Also drop __read_mostly on the newly const structure. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
The inet6_protocol structure is only passed as the first argument to inet6_add_protocol or inet6_del_protocol, both of which are declared as const. Thus the inet6_protocol structure itself can be const. Also drop __read_mostly where present on the newly const structures. Done with the help of Coccinelle. Signed-off-by:
-
- 28 Jul, 2017 8 commits
-
-
David S. Miller authored
Rick Farrington says: ==================== liquidio: standardization and cleanup This patchset corrects some non-standard macro usage. 1. Replaced custom MIN macro with use of standard 'min_t'. 2. Removed cryptic and misleading macro 'CAST_ULL'. change log: V1 -> V2: 1. Add driver cleanup of macro 'CAST_ULL'. V2 -> V3: 1. Remove extra parentheses from previous usage of macro 'CAST_ULL'. ==================== Signed-off-by: -
Rick Farrington authored
Signed-off-by:
Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
Rick Farrington authored
Signed-off-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
-
Florian Fainelli authored
Since commit a390d1f3 ("phylib: convert state_queue work to delayed_work"), the PHYLIB state machine was converted to use delayed workqueues, yet some functions were still referencing the PHY library timer in their comments, fix that and remove the now unused linux/timer.h include. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: extend firmware request logic We have been pondering for some time how to support loading different application firmwares onto NFP. We want to support both users selecting one of the firmware images provided by Netronome (which are optimized for different use cases each) as well as firmware images created by users themselves or other companies. In the end we decided to go with the simplest solution - depending on the right firmware image being placed in /lib/firmware. This vastly simplifies driver logic and also doesn't require any new API. Different NICs on one system may want to run different applications therefore we first try to load firmware specific to the device (by serial number of PCI slot) and if not present try the device model based name we have been using so far. ==================== Signed-off-by: -
Jakub Kicinski authored
request_firmware() will fallback to user space helper and may cause long delays when driver is loaded if udev doesn't correctly handle FW requests. Since we never really made use of the user space helper functionality switch to the simpler request_firmware_direct() call. The side effect of this change is that no warning will be printed when the FW image does not exists. To help users figure out which FW file is missing print a info message when we request each file. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
We generally look up firmware by card type, but that doesn't allow users who have more than one card of the same type in their system to select firmware per adapter. Unfortunately user space firmware helper seems fraught with difficulties and to be on its way out. In particular support for handling firmware uevents have been dropped from systemd and most distributions don't enable the FW fallback by default any more. To allow users selecting firmware for a particular device look up firmware names by serial and pci_name(). Use the direct lookup to disable generating uevents when enabled in Kconfig and not print any warnings to logs if adapter-specific files are missing. Users can place in /lib/firmware/netronome files named: pci-${pci_name}.nffw serial-${serial}.nffw to target a specific card. E.g.: pci-0000:04:00.0.nffw pci-0000:82:00.0.nffw serial-00-aa-bb-11-22-33-10-ff.nffw We use the full serial number including the interface id, as it appears in lspci output (bytes separated by '-'). Signed-off-by: -
Jakub Kicinski authored
We use a hack to defer probe when firmware was not pre-loaded or found on disk. This helps in case users forgot to include firmware in initramfs, the driver will most likely get another shot at probing after real root is mounted. This is not for what EPROBE_DEFER is supposed to be used, and when FW is completely missing every time new device is probed NFP will reprobe spamming kernel logs. Remove this hack, users will now have to make sure the right firmware image is present in initramfs if nfp.ko is placed there or built in. Signed-off-by:
-
- 27 Jul, 2017 8 commits
-
-
David S. Miller authored
Manish Chopra says: ==================== qed/qede: Enhancements This patch series adds these below features support in qed/qede 1) Ntuple filter configuration [via ethtool -n/N] 2) EEE (energy efficient ethernet) support [ethtool --set-eee/show-eee] 3) Coalescing configuration support for VFs [via ethtool -c/C] Please consider applying this to "net-next" V1->V2: * Fixes below Kbuild test robot warning. drivers/net//ethernet/qlogic/qed/qed_l2.c: In function 'qed_get_queue_coalesce': drivers/net//ethernet/qlogic/qed/qed_l2.c:2137:8: error: implicit declaration of function 'qed_vf_pf_get_coalesce' [-Werror=implicit-function-declaration] ==================== Signed-off-by: -
Rahul Verma authored
Maximum coalesce per Rx/Tx queue is extended from 255 to 511. Signed-off-by:
Rahul Verma <rahul.verma@cavium.com> Signed-off-by:
Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by:
-
Rahul Verma authored
Retrieve the actual coalesce value from hardware for every Rx/Tx queue, instead of Rx/Tx coalesce value cached during set coalesce. Signed-off-by:
-
Rahul Verma authored
This patch add the ethtool support to set RX/Tx coalesce value to the VF associated Rx/Tx queues. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
The patch adds ethtool callback implementations for querying/configuring the Energy Efficient Ethernet (EEE) parameters. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
The patch adds required driver support for reading/configuring the Energy Efficient Ethernet (EEE) parameters. Signed-off-by:
-
Chopra, Manish authored
This patch adds support for adding and deleting rx flow classification rules. Using this user can classify RX flow constituting of TCP/UDP 4-tuples [src_ip/dst_ip and src_port/dst_port] to be steered on a given RX queue Signed-off-by:
Manish Chopra <manish.chopra@cavium.com> Signed-off-by:
-
Chopra, Manish authored
This patch adds support for ethtool getter APIs to query RX flow classification rules. Signed-off-by:
-
- 26 Jul, 2017 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-07-25 This series contains updates to i40e and i40evf only. Gustavo Silva fixes a variable assignment, where the incorrect variable was being used to store the error parameter. Carolyn provides a fix for a problem found in systems when entering S4 state, by ensuring that the misc vector's IRQ is disabled as well. Jake removes the single-threaded restriction on the module workqueue, which was causing issues with events such as CORER. Does some future proofing, by changing how the driver displays the UDP tunnel type. Paul adds a retry in releasing resources if the admin queue times out during the first attempt to release the resources. Jesse fixes up references to 32bit timspec, since there are a small set of errors on 32 bit, so we need to be using the right calls for dealing with timespec64 variables. Cleaned up code indentation and corrected an "if" conditional check, as well as making the code flow more clear. Cast or changed the types to remove warnings for comparing signed and unsigned types. Adds missing includes in i40evf, which were being used but were not being directly included. Daniel Borkmann fixes i40e to fill the XDP prog_id with the id just like other XDP enabled drivers, so that on dump we can retrieve the attached program based on the id and dump BPF insns, opcodes, etc back to user space. Tushar Dave adds le32_to_cpu while evaluating the hardware descriptor fields, since they are in little-endian format. Also removed unnecessary "__packed" to a couple of i40evf structures. Stefan Assmann fixes an issue when an administratively set MAC was set and should now be switched back to 00:00:00:00:00:00, the pf_set_mac flag is not being toggled back to false. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2017-07-25 This series contains updates to ixgbe only. Tony provides all of the changes in the series, starting with adding a check to ensure that adding a MAC filter was successful, before setting the MACVLAN. In order to receive notifications of link configurations of the external PHY and support the configuration of the internal iXFI link on X552 devices, Tony enables LASI interrupts. Update the iXFI driver code flow, since the MAC register NW_MNG_IF_SEL fields have been redefined for X553 devices, so add MAC checks for iXFI flows. Added additional checks for flow control autonegotiation, since it is not support for X553 fiber and XFI devices. v2: removed unnecessary parens noticed by David Miller in patch 6 of the series. v3: dropped patch 6 of the original series, while we work out a more generic solution for malicious driver detection (MDD) support. v4: updated patch 1 of the series with the comments from Joe Perches which were: - switched logic to return on error - return 0 on success - declare retval as an integer ==================== Signed-off-by: -
Jakub Kicinski authored
Add a new target to install the bpf.h header to $(prefix)/include/bpf/ directory. This is necessary to build standalone applications using libbpf, without the need to clone the kernel sources and point to them. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Arnd Bergmann authored
gcc warns that the device name might overflow: drivers/net/hamradio/dmascc.c: In function 'dmascc_init': drivers/net/hamradio/dmascc.c:584:22: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=] sprintf(dev->name, "dmascc%i", 2 * n + i); drivers/net/hamradio/dmascc.c:584:3: note: 'sprintf' output between 8 and 17 bytes into a destination of size 16 sprintf(dev->name, "dmascc%i", 2 * n + i); >From the static data in this file, I can tell that the index is strictly limited to 16, so it won't overflow. This simply changes the sprintf() to snprintf(), which is a good idea in general, and shuts up this warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Stefan Assmann authored
When an administratively set MAC was previously set and should now be switched back to 00:00:00:00:00:00 the pf_set_mac flag did not get toggled back to false. As a result VFs were still treated as if an administratively set MAC was present. Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Tushar Dave authored
This is similar to 'commit 9588397d ("i40e: remove unnecessary __packed")' to avoid unaligned access. Signed-off-by:
Tushar Dave <tushar.n.dave@oracle.com> Tested-by:
-
Tushar Dave authored
i40e hardware descriptor fields are in little-endian format. Driver must use le32_to_cpu while evaluating these fields otherwise on big-endian arch we end up evaluating incorrect values, cause errors like: i40evf 0000:03:0a.0: Expected response 24 from PF, received 402653184 i40evf 0000:03:0a.1: Expected response 7 from PF, received 117440512 Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Tested-by:
-
Daniel Borkmann authored
Fill the XDP prog_id with the id just like we do in other XDP enabled drivers such as ixgbe. This is needed so that on dump we can retrieve the attached program based on the id, and dump BPF insns, opcodes, etc back to user space. Only XDP driver missing this is currently i40e. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Jesse Brandeburg authored
These includes were all being used in the driver, but weren't being directly included. Since the current advised method is to directly include anything that you need, this implements that. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
