- 03 Jul, 2009 5 commits
-
-
Bastian Blank authored
The atomic operations on parisc are defined as macros. The macros includes casts which disallows the use of some syntax elements and produces error like this: net/phonet/pep.c: In function 'pipe_rcv_status': net/phonet/pep.c:262: error: lvalue required as left operand of assignment The patch removes this superfluous casts. Signed-off-by:
Bastian Blank <waldi@debian.org> Signed-off-by:
Kyle McMartin <kyle@mcmartin.ca>
-
Alexander Beregalov authored
Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Acked-by:
Matthew Wilcox <willy@linux.intel.com> Acked-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
-
Alexander Beregalov authored
Fix this build error when CONFIG_PROC_FS is not set: drivers/parisc/ccio-dma.c:1574: error: 'ccio_proc_info_fops' undeclared Signed-off-by:
-
Alexander Beregalov authored
Fix this build error when CONFIG_STI_CONSOLE is not set drivers/video/stifb.c:1337: undefined reference to `sti_get_rom' Signed-off-by:
-
Kyle McMartin authored
Generic compat handlers look appropriate, so use those. Signed-off-by:
-
- 23 Jun, 2009 35 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfinLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (27 commits) Blackfin: fix dma-mapping build errors Blackfin: hook up new perf_counter_open syscall Blackfin: drop BF535-specific text for exception 0x2A (unaligned instruction) Blackfin: fix early crash when booting on wrong cpu Blackfin: fix GPTMR0_CLOCKSOURCE dependency on BFIN_GPTIMERS Blackfin: drop unused ISP1760 port1_disable from board resources Blackfin: bf526-ezbrd: handle different SDRAM chips Blackfin: fix typo in TRAS define in mem_init.h header Blackfin: unify memory map headers Blackfin: stick the CPU name into boot image name Blackfin: update defconfigs Blackfin: decouple unrelated cache settings to get exact behavior Blackfin: update I-pipe patch level Blackfin: remove obsolete mcount support from I-pipe code Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipeline Blackfin: convert interrupt pipeline to irqflags Blackfin: allow people to select BF51x-0.1 silicon rev Blackfin: bf526-ezbrd: set SPI flash resources to SST device Blackfin: fix accidental reset in some boot modes Blackfin: abstract irq14 lowering in do_irq ...
-
git://git.infradead.org/~dwmw2/iommu-2.6.31Linus Torvalds authored
* git://git.infradead.org/~dwmw2/iommu-2.6.31: intel-iommu: Fix one last ia64 build problem in Pass Through Support VT-d: support the device IOTLB VT-d: cleanup iommu_flush_iotlb_psi and flush_unmaps VT-d: add device IOTLB invalidation support VT-d: parse ATSR in DMA Remapping Reporting Structure PCI: handle Virtual Function ATS enabling PCI: support the ATS capability intel-iommu: dmar_set_interrupt return error value intel-iommu: Tidy up iommu->gcmd handling intel-iommu: Fix tiny theoretical race in write-buffer flush. intel-iommu: Clean up handling of "caching mode" vs. IOTLB flushing. intel-iommu: Clean up handling of "caching mode" vs. context flushing. VT-d: fix invalid domain id for KVM context flush Fix !CONFIG_DMAR build failure introduced by Intel IOMMU Pass Through Support Intel IOMMU Pass Through Support Fix up trivial conflicts in drivers/pci/{intel-iommu.c,intr_remapping.c}
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: new stack is no longer experimental firewire: net: better FIFO address range check and rcodes firewire: net: fix card driver reloading firewire: core: fix iso context shutdown on card removal firewire: core: fix DMA unmapping in iso buffer removal firewire: net: adjust net_device ops firewire: net: remove unused code firewire: net: allow for unordered unit discovery firewire: net: style changes firewire: net: add Kconfig item, rename driver firewire: add IPv4 support
-
Trond Myklebust authored
Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Trond Myklebust authored
Signed-off-by:
-
Trond Myklebust authored
As noted in the previous patch, the NFSv4 client mount code currently has several limitations. If the mount path contains symlinks, or referrals, or even if it just contains a '..', then the client code in nfs4_path_walk() will fail with an error. This patch replaces the nfs4_path_walk()-based lookup with a helper function that sets up a private namespace to represent the namespace on the server, then uses the ordinary VFS and NFS path lookup code to walk down the mount path in that namespace. Signed-off-by:
-
Trond Myklebust authored
The purpose of this patch is to improve the remote mount path lookup support for distributed filesystems such as the NFSv4 client. When given a mount command of the form "mount server:/foo/bar /mnt", the NFSv4 client is required to look up the filehandle for "server:/", and then look up each component of the remote mount path "foo/bar" in order to find the directory that is actually going to be mounted on /mnt. Following that remote mount path may involve following symlinks, crossing server-side mount points and even following referrals to filesystem volumes on other servers. Since the standard VFS path lookup code already supports walking paths that contain all these features (using in-kernel automounts for following referrals) we would like to be able to reuse that rather than duplicate the full path traversal functionality in the NFSv4 client code. This patch therefore defines a VFS helper function create_mnt_ns(), that sets up a temporary filesystem namespace and attaches a root filesystem to it. It exports the create_mnt_ns() and put_mnt_ns() function for use by filesystem modules. Signed-off-by:
-
Trond Myklebust authored
In order to allow modules to use it without having to export vfsmount_lock. Signed-off-by:
-
Linus Torvalds authored
SLAB uses get/put_online_cpus() which use a mutex which is itself only initialized when cpu_hotplug_init() is called. Currently we hang suring boot in SLAB due to doing that too late. Reported by James Bottomley and Sachin Sant (and possibly others). Debugged by Benjamin Herrenschmidt. This just removes the dynamic initialization of the data structures, and replaces it with a static one, avoiding this dependency entirely, and removing one unnecessary special initcall. Tested-by:
Sachin Sant <sachinp@in.ibm.com> Tested-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
FUJITA Tomonori authored
The recent deprecation of dma_sync_{sg,single} ironically broke Blackfin systems. This is because we don't define dma_sync_sg_for_cpu at all, so until the DMA asm-generic conversion/cleanup is done after the next release, simply stub out the dma_sync_sg_for_{cpu,device} functions. Signed-off-by:FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Mike Frysinger <vapier@gentoo.org>
-
Mike Frysinger authored
Signed-off-by: -
Yi Li authored
We don't support the BF535 at all, and the exception 0x2A text specific to it is pretty verbose and confusing (since the behavior is simply odd), so punt it to keep the noise down. Signed-off-by:
Yi Li <yi.li@analog.com> Signed-off-by:
-
Robin Getz authored
Make sure we process the kernel command line before poking the hardware, so that we can process early printk. This helps ensure that if you boot a kernel configured for a different processor, something will be left in the log buffer. Signed-off-by:
Robin Getz <robin.getz@analog.com> Signed-off-by:
-
Mike Frysinger authored
The GPTMR0_CLOCKSOURCE Kconfig option requires the gptimers framework, so make sure it is selected when this option is enabled. Reported-by:
Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by:
-
Mike Frysinger authored
The port1 disable stuff was dropped from the USB ISP1760, so update the Blackfin boards accordingly. Signed-off-by: -
Graf Yang authored
The BF526-EZBRD changed SDRAM chips between board revisions, so create a timing table that can accommodate both. Signed-off-by:
Graf Yang <graf.yang@analog.com> Signed-off-by:
-
Graf Yang authored
We defined SDRAM_tRAS to TRAS_4, but then wrongly defined SDRAM_tRAS_num to 3. Signed-off-by:
-
Mike Frysinger authored
Many aspects of the Blackfin memory map is exactly the same across all variants. Rather than copy and paste all of these duplicated values in each header, unify all of these into the common Blackfin memory map header file. In the process, push down BF561 SMP specific stuff to the BF561 specific header to keep the noise down. Signed-off-by: -
Robin Getz authored
Rather than use "Linux" in the boot image name (as this is redundant -- the image type is already set to "linux"), use the CPU name. This makes it fairly obvious when a wrong image is accidentally booted. Otherwise there is no kernel output and you waste time scratching your head wondering wtf just happened. Signed-off-by:
Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by:
-
Mike Frysinger authored
Signed-off-by: -
Jie Zhang authored
The current cache options don't really represent the hardware features. They end up setting different aspects of the hardware so that the end result is to turn on/off the cache. Unfortunately, when we hit cache problems with the hardware, it's difficult to test different settings to root cause the problem. The current settings also don't cleanly allow for different caching behaviors with different regions of memory. So split the configure options such that they properly reflect the settings that are applied to the hardware. Signed-off-by:
Jie Zhang <jie.zhang@analog.com> Signed-off-by:
-
Philippe Gerum authored
Signed-off-by:
Philippe Gerum <rpm@xenomai.org> Signed-off-by:
-
Philippe Gerum authored
Signed-off-by:
-
Philippe Gerum authored
Signed-off-by:
-
Philippe Gerum authored
Signed-off-by:
-
Mike Frysinger authored
Now that 0.1 of the BF51x is coming out, allow people to build for it. Signed-off-by: -
Graf Yang authored
The BF526-EZBRD has a SST SPI flash on it, not a ST Micro. Signed-off-by:
-
Sonic Zhang authored
We read the SWRST (Software Reset) register to get at the last reset state, and then we may configure the DOUBLE_FAULT bit to control behavior when a double fault occurs. But if the lower bits of the register is already set (like UART boot mode on a BF54x), we inadvertently make the system reset by writing to the SYSTEM_RESET field at the same time. So make sure the lower 4 bits are always cleared. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Mike Frysinger authored
Split out the optional IRQ14 lowering code to further simplify the asm_do_IRQ() function and keep the ifdef nest under control. Signed-off-by: -
Mike Frysinger authored
Take a page from x86 and abstract the stack checking out of the asm_do_IRQ() function so that the result is easier to digest. Signed-off-by: -
Mike Frysinger authored
Signed-off-by: -
Mike Frysinger authored
With the common IRQ code initializing much more of the irq_desc state, we can't blindly initialize it ourselves to the local bad_irq state. If we do, we end up wrongly clobbering many fields. So punt most of the bad irq code as the common layers will handle the default state, and simply call handle_bad_irq() directly when the IRQ we are processing is invalid. Signed-off-by: -
Mike Frysinger authored
Update anomaly headers to match latest released anomaly sheets. Signed-off-by: -
Mike Frysinger authored
The BF533-EZKIT has two Flash In-System Programming devices hooked up to the async memory bus, so add resources for the primary flashes and the SRAMs on the devices. Signed-off-by: -
Mike Frysinger authored
The common DSA code changed structure layout, so update the BF518F-EZBRD resources accordingly. Signed-off-by:
-
