1. 10 Jun, 2011 1 commit
  2. 07 Jun, 2011 2 commits
  3. 06 Jun, 2011 11 commits
    • Stephen Warren's avatar
      ALSA: hda: HDMI: Support codecs with fewer cvts than pins · 384a48d7
      Stephen Warren authored
      The general concept of this change is to create a PCM device for each
      pin widget instead of each converter widget. Whenever a PCM is opened,
      a converter is dynamically selected to drive that pin based on those
      available for muxing into the pin.
      
      The one thing this model doesn't support is a single PCM/converter
      sending audio to multiple pin widgets at once.
      
      Note that this means that a struct hda_pcm_stream's nid variable is
      set to 0 except between a stream's open and cleanup calls. The dynamic
      de-assignment of converters to PCMs occurs within cleanup, not close,
      in order for it to co-incide with when controller stream IDs are
      cleaned up from converters.
      
      While the PCM for a pin is not open, the pin is disabled (its widget
      control's PIN_OUT bit is cleared) so that if the currently routed
      converter is used to drive a different PCM/pin, that audio does not
      leak out over a disabled pin.
      
      We use the recently added SPDIF virtualization feature in order to
      create SPDIF controls for each pin widget instead of each converter
      widget, so that state is specific to a PCM.
      
      In order to support this, a number of more mechanical changes are made:
      
      * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it
        clear exactly what the code is dealing with.
      
      * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant
        data. In particular, we store a converter's capabilities in the per_cvt
        entry, rather than relying on a combination of codec_pcm_pars and
        the struct hda_pcm_stream.
      
      * ELD-related workarounds were removed from hdmi_channel_allocation
        into hdmi_instrinsic in order to simplifiy infoframe calculations and
        remove HW dependencies.
      
      * Various functions only apply to a single pin, since there is now
        only 1 pin per PCM. For example, hdmi_setup_infoframe,
        hdmi_setup_stream.
      
      * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing
        and data retrieval, rather than determining which pins/converters
        are to be used for creating PCMs.
      
      This is quite a large change; it may be appropriate to simply read the
      result of the patch rather than the diffs. Some small parts of the change
      might be separable into different patches, but I think the bulk of the
      change will probably always be one large patch. Hopefully the change
      isn't too opaque!
      
      This has been tested on:
      
      * NVIDIA GeForce 400 series discrete graphics card. This model has the
        classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM
        audio to a PC monitor that supports audio.
      
      * NVIDIA GeForce 520 discrete graphics card. This model is the new
        1 codec n converters m pins m>n model. Tested stereo PCM audio to a
        PC monitor that supports audio.
      
      * NVIDIA GeForce 400 series laptop graphics chip. This model has the
        classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM,
        multi-channel PCM, and AC3 pass-through to an AV receiver.
      
      * Intel Ibex Peak laptop. This model is the new 1 codec n converters m
        pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass-
        through to an AV receiver.
      
      Note that I'm not familiar at all with AC3 pass-through. Hence, I may
      not have covered all possible mechanisms that are applicable here. I do
      know that my receiver definitely received AC3, not decoded PCM. I tested
      with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a
      WAV file that I believe has AC3 content rather than PCM.
      
      I also tested:
      * Play a stream
      * Mute while playing
      * Stop stream
      * Play some other streams to re-assign the converter to a different
        pin, PCM, set of SPDIF controls, ... hence hopefully triggering
        cleanup for the original PCM.
      * Unmute original stream while not playing
      * Play a stream on the original pin/PCM.
      
      This was to test SPDIF control virtualization.
      Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      384a48d7
    • Stephen Warren's avatar
      ALSA: hda: hdmi_eld_update_pcm_info: update a stream in place · 2def8172
      Stephen Warren authored
      A future change won't store an entire hda_pcm_stream just to represent
      the capabilities of a codec; a custom data-structure will be used. To
      ease that transition, modify hdmi_eld_update_pcm_info to expect the
      hda_pcm_stream to be pre-initialized with the codec's capabilities, and
      to update those capabilities in-place based on the ELD.
      Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      2def8172
    • Stephen Warren's avatar
      ALSA: hda: Separate generic and non-generic implementations · 3aaf8980
      Stephen Warren authored
      A future change will significantly rework the generic implementation
      in order to support codecs with a different number of pins and
      converters. Isolate the more custom codec variants from this change by
      duplicating the small portions of generic code they share. This
      simplifies the later rework of that previously shared code, since we
      don't have to consider the more custom codecs, and also prevents
      support for those codecs from regressing.
      Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      3aaf8980
    • Stephen Warren's avatar
      ALSA: hda: Virtualize SPDIF out controls · 74b654c9
      Stephen Warren authored
      The SPDIF output controls apply to converter widgets. A future change
      will create a PCM device per pin widget, and hence a set of SPDIF output
      controls per pin widget, for certain HDMI codecs. To support this, we
      need the ability to virtualize the SPDIF output controls. Specifically:
      
      * Controls can be "unassigned" from real hardware when a converter is
        not used for the PCM the control was created for.
      * Control puts only write to hardware when they are assigned.
      * Controls can be "assigned" to real hardware when a converter is picked
        to support output for a particular PCM.
      * When a converter is assigned, the hardware is updated to the cached
        configuration.
      Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      74b654c9
    • Stephen Warren's avatar
      ALSA: hda: Allow multple SPDIF controls per codec · 7c935976
      Stephen Warren authored
      Currently, the data that backs the kcontrols created by
      snd_hda_create_spdif_out_ctls is stored directly in struct hda_codec. When
      multiple sets of these controls are stored, they will all manipulate the
      same data, causing confusion. Instead, store an array of this data, one
      copy per converter, to isolate the controls.
      
      This patch would cause a behavioural change in the case where
      snd_hda_create_spdif_out_ctls was called multiple times for a single codec.
      As best I can tell, this is never the case for any codec.
      
      This will be relevant at least for some HDMI audio codecs, such as the
      NVIDIA GeForce 520 and Intel Ibex Peak. A future change will modify the
      driver's handling of those codecs to create multiple PCMs per codec. Note
      that this issue isn't affected by whether one creates a PCM-per-converter
      or PCM-per-pin; there are multiple of both within a single codec in both
      of those codecs.
      
      Note that those codecs don't currently create multiple PCMs for the codec
      due to the default HW mux state of all pins being to point at the same
      converter, hence there is only a single converter routed to any pin, and
      hence only a single PCM.
      Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      7c935976
    • Stephen Warren's avatar
      ALSA: hda: Gate ELD usage only by whether ELD is valid · c3d52105
      Stephen Warren authored
      It's perfectly valid for an ELD to contain no SADs. This simply means that
      only basic audio is supoprted.
      
      In this case, we still want to limit a PCM's capabilities based on the ELD.
      
      History:
      
      * Originally, ELD application was limited solely by sad_count>0, which
        was used to check that an ELD had been read.
      * Later, eld_valid was added to the conditions to satisfy.
      
      This change removes the original sad_count>0 check, which when squashed
      with the above two changes ends up replacing if (sad_count) with
      if (eld_valid).
      Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      c3d52105
    • Linus Torvalds's avatar
      Linux 3.0-rc2 · 59c5f46f
      Linus Torvalds authored
      59c5f46f
    • Hugh Dickins's avatar
      mm: fix ENOSPC returned by handle_mm_fault() · e0dcd8a0
      Hugh Dickins authored
      Al Viro observes that in the hugetlb case, handle_mm_fault() may return
      a value of the kind ENOSPC when its caller is expecting a value of the
      kind VM_FAULT_SIGBUS: fix alloc_huge_page()'s failure returns.
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Acked-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      Cc: stable@kernel.org
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e0dcd8a0
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 · 0d6925d4
      Linus Torvalds authored
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
        ALSA: usb - turn off de-emphasis in s/pdif for cm6206
        ALSA: asihpi: Use angle brackets for system includes
        ALSA: fm801: add error handling if auto-detect fails
        ALSA: hda - Check pin support EAPD in ad198x_power_eapd_write
        ALSA: hda - Fix HP and Front pins of ad1988/ad1989 in ad198x_power_eapd()
        ALSA: 6fire: Don't leak firmware in error path
        ASoC: Fix wm_hubs input PGA ZC bits
        ASoC: Fix dapm_is_shared_kcontrol so everything isn't shared
      0d6925d4
    • Linus Torvalds's avatar
      Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging · c12f667e
      Linus Torvalds authored
      * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
        hwmon: (max6642): Better chip detection schema
        hwmon: (coretemp) Further relax temperature range checks
        hwmon: (coretemp) Fix TjMax detection for older CPUs
        hwmon: (coretemp) Relax target temperature range check
        hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_fault
      c12f667e
    • Takashi Iwai's avatar
      Merge branch 'fix/asoc' into for-linus · 3190dad9
      Takashi Iwai authored
      3190dad9
  4. 04 Jun, 2011 17 commits
  5. 03 Jun, 2011 9 commits