Merge branch 'fixes-v4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull key handling fixes from James Morris:
 "Fixes for the Keys subsystem by Eric Biggers"

* 'fixes-v4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: fix out-of-bounds read during ASN.1 parsing
  KEYS: trusted: fix writing past end of buffer in trusted_read()
  KEYS: return full count in keyring_read() if buffer is too small

In commit 30d6e0a4 ("futex: Remove duplicated code and fix undefined
behaviour"), I let FUTEX_WAKE_OP to fail on invalid op.  Namely when op
should be considered as shift and the shift is out of range (< 0 or > 31).

But strace's test suite does this madness:

  futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee);
  futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xbadfaced);
  futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xffffffff);

When I pick the first 0xa0caffee, it decodes as:

  0x80000000 & 0xa0caffee: oparg is shift
  0x70000000 & 0xa0caffee: op is FUTEX_OP_OR
  0x0f000000 & 0xa0caffee: cmp is FUTEX_OP_CMP_EQ
  0x00fff000 & 0xa0caffee: oparg is sign-extended 0xcaf = -849
  0x00000fff & 0xa0caffee: cmparg is sign-extended 0xfee = -18

That means the op tries to do this:

  (futex |= (1 << (-849))) == -18

which is completely bogus. The new check of op in the code is:

        if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) {
                if (oparg < 0 || oparg > 31)
                        return -EINVAL;
                oparg = 1 << oparg;
        }

which results obviously in the "Invalid argument" errno:

  FAIL: futex
  ===========

  futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee) = -1: Invalid argument
  futex.test: failed test: ../futex failed with code 1

So let us soften the failure to print only a (ratelimited) message, crop
the value and continue as if it were right.  When userspace keeps up, we
can switch this to return -EINVAL again.

[v2] Do not return 0 immediatelly, proceed with the cropped value.

Fixes: 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

syzkaller with KASAN reported an out-of-bounds read in
asn1_ber_decoder().  It can be reproduced by the following command,
assuming CONFIG_X509_CERTIFICATE_PARSER=y and CONFIG_KASAN=y:

    keyctl add asymmetric desc $'\x30\x30' @s

The bug is that the length of an ASN.1 data value isn't validated in the
case where it is encoded using the short form, causing the decoder to
read past the end of the input buffer.  Fix it by validating the length.

The bug report was:

    BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233
    Read of size 1 at addr ffff88003cccfa02 by task syz-executor0/6818

    CPU: 1 PID: 6818 Comm: syz-executor0 Not tainted 4.14.0-rc7-00008-g5f479447 #2
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Call Trace:
     __dump_stack lib/dump_stack.c:16 [inline]
     dump_stack+0xb3/0x10b lib/dump_stack.c:52
     print_address_description+0x79/0x2a0 mm/kasan/report.c:252
     kasan_report_error mm/kasan/report.c:351 [inline]
     kasan_report+0x236/0x340 mm/kasan/report.c:409
     __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427
     asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233
     x509_cert_parse+0x1db/0x650 crypto/asymmetric_keys/x509_cert_parser.c:89
     x509_key_preparse+0x64/0x7a0 crypto/asymmetric_keys/x509_public_key.c:174
     asymmetric_key_preparse+0xcb/0x1a0 crypto/asymmetric_keys/asymmetric_type.c:388
     key_create_or_update+0x347/0xb20 security/keys/key.c:855
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0x1cd/0x340 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0xbe
    RIP: 0033:0x447c89
    RSP: 002b:00007fca7a5d3bd8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8
    RAX: ffffffffffffffda RBX: 00007fca7a5d46cc RCX: 0000000000447c89
    RDX: 0000000020006f4a RSI: 0000000020006000 RDI: 0000000020001ff5
    RBP: 0000000000000046 R08: fffffffffffffffd R09: 0000000000000000
    R10: 0000000000000002 R11: 0000000000000246 R12: 0000000000000000
    R13: 0000000000000000 R14: 00007fca7a5d49c0 R15: 00007fca7a5d4700

Fixes: 42d5ec27 ("X.509: Add an ASN.1 decoder")
Cc: <stable@vger.kernel.org> # v3.7+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

When calling keyctl_read() on a key of type "trusted", if the
user-supplied buffer was too small, the kernel ignored the buffer length
and just wrote past the end of the buffer, potentially corrupting
userspace memory.  Fix it by instead returning the size required, as per
the documentation for keyctl_read().

We also don't even fill the buffer at all in this case, as this is
slightly easier to implement than doing a short read, and either
behavior appears to be permitted.  It also makes it match the behavior
of the "encrypted" key type.

Fixes: d00a1c72 ("keys: add new trusted key-type")
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Cc: <stable@vger.kernel.org> # v2.6.38+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Commit e645016a ("KEYS: fix writing past end of user-supplied buffer
in keyring_read()") made keyring_read() stop corrupting userspace memory
when the user-supplied buffer is too small.  However it also made the
return value in that case be the short buffer size rather than the size
required, yet keyctl_read() is actually documented to return the size
required.  Therefore, switch it over to the documented behavior.

Note that for now we continue to have it fill the short buffer, since it
did that before (pre-v3.13) and dump_key_tree_aux() in keyutils arguably
relies on it.

Fixes: e645016a ("KEYS: fix writing past end of user-supplied buffer in keyring_read()")
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Pull signal bugfix from Eric Biederman:
 "When making the generic support for SIGEMT conditional on the presence
  of SIGEMT I made a typo that causes it to fail to activate. It was
  noticed comparatively quickly but the bug report just made it to me
  today"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: Fix name of SIGEMT in #if defined() check

Commit cc731525 ("signal: Remove kernel interal si_code magic")
added a check for SIGMET and NSIGEMT being defined. That SIGMET should
in fact be SIGEMT, with SIGEMT being defined in
arch/{alpha,mips,sparc}/include/uapi/asm/signal.h

This was actually pointed out by BenHutchings in a lwn.net comment
here https://lwn.net/Comments/734608/

Fixes: cc731525 ("signal: Remove kernel interal si_code magic")
Signed-off-by: Andrew Clayton <andrew@digital-domain.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pull block fixes from Jens Axboe:
 "A few fixes that should go into this series:

   - Regression fix for ide-cd, ensuring that a request is fully
     initialized. From Hongxu.

   - Ditto fix for virtio_blk, from Bart.

   - NVMe fix from Keith, ensuring that we set the right block size on
     revalidation. If the block size changed, we'd be in trouble without
     it.

   - NVMe rdma fix from Sagi, fixing a potential hang while the
     controller is being removed"

* 'for-linus' of git://git.kernel.dk/linux-block:
  ide:ide-cd: fix kernel panic resulting from missing scsi_req_init
  nvme: Fix setting logical block format when revalidating
  virtio_blk: Fix an SG_IO regression
  nvme-rdma: fix possible hang when issuing commands during ctrl removal

Pull networking fixes from David Miller:

 1) Fix refcounting in xfrm_bundle_lookup() when using a dummy bundle,
    from Steffen Klassert.

 2) Fix crypto header handling in rx data frames in ath10k driver, from
    Vasanthakumar Thiagarajan.

 3) Fix use after free of qdisc when we defer tcp_chain_flush() to a
    workqueue. From Cong Wang.

 4) Fix double free in lapbether driver, from Pan Bian.

 5) Sanitize TUNSETSNDBUF values, from Craig Gallek.

 6) Fix refcounting when addrconf_permanent_addr() calls
    ipv6_del_addr(). From Eric Dumazet.

 7) Fix MTU probing bug in TCP that goes back to 2007, from Eric
    Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  tcp: fix tcp_mtu_probe() vs highest_sack
  ipv6: addrconf: increment ifp refcount before ipv6_del_addr()
  tun/tap: sanitize TUNSETSNDBUF input
  mlxsw: i2c: Fix buffer increment counter for write transaction
  mlxsw: reg: Add high and low temperature thresholds
  MAINTAINERS: Remove Yotam from mlxfw
  MAINTAINERS: Update Yotam's E-mail
  net: hns: set correct return value
  net: lapbether: fix double free
  bpf: remove SK_REDIRECT from UAPI
  net: phy: marvell: Only configure RGMII delays when using RGMII
  xfrm: Fix GSO for IPsec with GRE tunnel.
  tc-testing: fix arg to ip command: -s -> -n
  net_sched: remove tcf_block_put_deferred()
  l2tp: hold tunnel in pppol2tp_connect()
  Revert "ath10k: fix napi_poll budget overflow"
  ath10k: rebuild crypto header in rx data frames
  wcn36xx: Remove unnecessary rcu_read_unlock in wcn36xx_bss_info_changed
  xfrm: Clear sk_dst_cache when applying per-socket policy.
  xfrm: Fix xfrm_dst_cache memleak

Syzkaller with KASAN has reported a use-after-free of vma->vm_flags in
__do_page_fault() with the following reproducer:

  mmap(&(0x7f0000000000/0xfff000)=nil, 0xfff000, 0x3, 0x32, 0xffffffffffffffff, 0x0)
  mmap(&(0x7f0000011000/0x3000)=nil, 0x3000, 0x1, 0x32, 0xffffffffffffffff, 0x0)
  r0 = userfaultfd(0x0)
  ioctl$UFFDIO_API(r0, 0xc018aa3f, &(0x7f0000002000-0x18)={0xaa, 0x0, 0x0})
  ioctl$UFFDIO_REGISTER(r0, 0xc020aa00, &(0x7f0000019000)={{&(0x7f0000012000/0x2000)=nil, 0x2000}, 0x1, 0x0})
  r1 = gettid()
  syz_open_dev$evdev(&(0x7f0000013000-0x12)="2f6465762f696e7075742f6576656e742300", 0x0, 0x0)
  tkill(r1, 0x7)

The vma should be pinned by mmap_sem, but handle_userfault() might (in a
return to userspace scenario) release it and then acquire again, so when
we return to __do_page_fault() (with other result than VM_FAULT_RETRY),
the vma might be gone.

Specifically, per Andrea the scenario is
 "A return to userland to repeat the page fault later with a
  VM_FAULT_NOPAGE retval (potentially after handling any pending signal
  during the return to userland). The return to userland is identified
  whenever FAULT_FLAG_USER|FAULT_FLAG_KILLABLE are both set in
  vmf->flags"

However, since commit a3c4fb7c ("x86/mm: Fix fault error path using
unsafe vma pointer") there is a vma_pkey() read of vma->vm_flags after
that point, which can thus become use-after-free.  Fix this by moving
the read before calling handle_mm_fault().
Reported-by: syzbot <bot+6a5269ce759a7bb12754ed9622076dc93f65a1f6@syzkaller.appspotmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Fixes: 3c4fb7c9c2e ("x86/mm: Fix fault error path using unsafe vma pointer")
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull cifs fix from Steve French:
 "smb3 file name too long fix"

* tag 'smb3-file-name-too-long-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: check MaxPathNameComponentLength != 0 before using it

Since we split the scsi_request out of struct request, while the
standard prep_rq_fn builds 10 byte cmds, it missed to invoke
scsi_req_init() to initialize certain fields of a scsi_request
structure (.__cmd[], .cmd, .cmd_len and .sense_len but no other
members of struct scsi_request).

An example panic on virtual machines (qemu/virtualbox) to boot
from IDE cdrom:
...
[    8.754381] Call Trace:
[    8.755419]  blk_peek_request+0x182/0x2e0
[    8.755863]  blk_fetch_request+0x1c/0x40
[    8.756148]  ? ktime_get+0x40/0xa0
[    8.756385]  do_ide_request+0x37d/0x660
[    8.756704]  ? cfq_group_service_tree_add+0x98/0xc0
[    8.757011]  ? cfq_service_tree_add+0x1e5/0x2c0
[    8.757313]  ? ktime_get+0x40/0xa0
[    8.757544]  __blk_run_queue+0x3d/0x60
[    8.757837]  queue_unplugged+0x2f/0xc0
[    8.758088]  blk_flush_plug_list+0x1f4/0x240
[    8.758362]  blk_finish_plug+0x2c/0x40
...
[    8.770906] RIP: ide_cdrom_prep_fn+0x63/0x180 RSP: ffff92aec018bae8
[    8.772329] ---[ end trace 6408481e551a85c9 ]---
...

Fixes: 82ed4db4 ("block: split scsi_request out of struct request")
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Based on SNMP values provided by Roman, Yuchung made the observation
that some crashes in tcp_sacktag_walk() might be caused by MTU probing.

Looking at tcp_mtu_probe(), I found that when a new skb was placed
in front of the write queue, we were not updating tcp highest sack.

If one skb is freed because all its content was copied to the new skb
(for MTU probing), then tp->highest_sack could point to a now freed skb.

Bad things would then happen, including infinite loops.

This patch renames tcp_highest_sack_combine() and uses it
from tcp_mtu_probe() to fix the bug.

Note that I also removed one test against tp->sacked_out,
since we want to replace tp->highest_sack regardless of whatever
condition, since keeping a stale pointer to freed skb is a recipe
for disaster.

Fixes: a47e5a98 ("[TCP]: Convert highest_sack to sk_buff to allow direct access")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-by: Roman Gushchin <guro@fb.com>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the (unlikely) event fixup_permanent_addr() returns a failure,
addrconf_permanent_addr() calls ipv6_del_addr() without the
mandatory call to in6_ifa_hold(), leading to a refcount error,
spotted by syzkaller :

WARNING: CPU: 1 PID: 3142 at lib/refcount.c:227 refcount_dec+0x4c/0x50
lib/refcount.c:227
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 3142 Comm: ip Not tainted 4.14.0-rc4-next-20171009+ #33
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:52
 panic+0x1e4/0x41c kernel/panic.c:181
 __warn+0x1c4/0x1e0 kernel/panic.c:544
 report_bug+0x211/0x2d0 lib/bug.c:183
 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:178
 do_trap_no_signal arch/x86/kernel/traps.c:212 [inline]
 do_trap+0x260/0x390 arch/x86/kernel/traps.c:261
 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:298
 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:311
 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905
RIP: 0010:refcount_dec+0x4c/0x50 lib/refcount.c:227
RSP: 0018:ffff8801ca49e680 EFLAGS: 00010286
RAX: 000000000000002c RBX: ffff8801d07cfcdc RCX: 0000000000000000
RDX: 000000000000002c RSI: 1ffff10039493c90 RDI: ffffed0039493cc4
RBP: ffff8801ca49e688 R08: ffff8801ca49dd70 R09: 0000000000000000
R10: ffff8801ca49df58 R11: 0000000000000000 R12: 1ffff10039493cd9
R13: ffff8801ca49e6e8 R14: ffff8801ca49e7e8 R15: ffff8801d07cfcdc
 __in6_ifa_put include/net/addrconf.h:369 [inline]
 ipv6_del_addr+0x42b/0xb60 net/ipv6/addrconf.c:1208
 addrconf_permanent_addr net/ipv6/addrconf.c:3327 [inline]
 addrconf_notify+0x1c66/0x2190 net/ipv6/addrconf.c:3393
 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x32/0x60 net/core/dev.c:1697
 call_netdevice_notifiers net/core/dev.c:1715 [inline]
 __dev_notify_flags+0x15d/0x430 net/core/dev.c:6843
 dev_change_flags+0xf5/0x140 net/core/dev.c:6879
 do_setlink+0xa1b/0x38e0 net/core/rtnetlink.c:2113
 rtnl_newlink+0xf0d/0x1a40 net/core/rtnetlink.c:2661
 rtnetlink_rcv_msg+0x733/0x1090 net/core/rtnetlink.c:4301
 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2408
 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4313
 netlink_unicast_kernel net/netlink/af_netlink.c:1273 [inline]
 netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1299
 netlink_sendmsg+0xa4a/0xe70 net/netlink/af_netlink.c:1862
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 ___sys_sendmsg+0x75b/0x8a0 net/socket.c:2049
 __sys_sendmsg+0xe5/0x210 net/socket.c:2083
 SYSC_sendmsg net/socket.c:2094 [inline]
 SyS_sendmsg+0x2d/0x50 net/socket.c:2090
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x7fa9174d3320
RSP: 002b:00007ffe302ae9e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffe302b2ae0 RCX: 00007fa9174d3320
RDX: 0000000000000000 RSI: 00007ffe302aea20 RDI: 0000000000000016
RBP: 0000000000000082 R08: 0000000000000000 R09: 000000000000000f
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe302b32a0
R13: 0000000000000000 R14: 00007ffe302b2ab8 R15: 00007ffe302b32b8

Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzkaller found several variants of the lockup below by setting negative
values with the TUNSETSNDBUF ioctl.  This patch adds a sanity check
to both the tun and tap versions of this ioctl.

  watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [repro:2389]
  Modules linked in:
  irq event stamp: 329692056
  hardirqs last  enabled at (329692055): [<ffffffff824b8381>] _raw_spin_unlock_irqrestore+0x31/0x75
  hardirqs last disabled at (329692056): [<ffffffff824b9e58>] apic_timer_interrupt+0x98/0xb0
  softirqs last  enabled at (35659740): [<ffffffff824bc958>] __do_softirq+0x328/0x48c
  softirqs last disabled at (35659731): [<ffffffff811c796c>] irq_exit+0xbc/0xd0
  CPU: 0 PID: 2389 Comm: repro Not tainted 4.14.0-rc7 #23
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  task: ffff880009452140 task.stack: ffff880006a20000
  RIP: 0010:_raw_spin_lock_irqsave+0x11/0x80
  RSP: 0018:ffff880006a27c50 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff10
  RAX: ffff880009ac68d0 RBX: ffff880006a27ce0 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffff880006a27ce0 RDI: ffff880009ac6900
  RBP: ffff880006a27c60 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000001 R11: 000000000063ff00 R12: ffff880009ac6900
  R13: ffff880006a27cf8 R14: 0000000000000001 R15: ffff880006a27cf8
  FS:  00007f4be4838700(0000) GS:ffff88000cc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000020101000 CR3: 0000000009616000 CR4: 00000000000006f0
  Call Trace:
   prepare_to_wait+0x26/0xc0
   sock_alloc_send_pskb+0x14e/0x270
   ? remove_wait_queue+0x60/0x60
   tun_get_user+0x2cc/0x19d0
   ? __tun_get+0x60/0x1b0
   tun_chr_write_iter+0x57/0x86
   __vfs_write+0x156/0x1e0
   vfs_write+0xf7/0x230
   SyS_write+0x57/0xd0
   entry_SYSCALL_64_fastpath+0x1f/0xbe
  RIP: 0033:0x7f4be4356df9
  RSP: 002b:00007ffc18101c08 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4be4356df9
  RDX: 0000000000000046 RSI: 0000000020101000 RDI: 0000000000000005
  RBP: 00007ffc18101c40 R08: 0000000000000001 R09: 0000000000000001
  R10: 0000000000000001 R11: 0000000000000293 R12: 0000559c75f64780
  R13: 00007ffc18101d30 R14: 0000000000000000 R15: 0000000000000000

Fixes: 33dccbb0 ("tun: Limit amount of queued packets per device")
Fixes: 20d29d7a ("net: macvtap driver")
Signed-off-by: Craig Gallek <kraig@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It fixes a problem for the last chunk where 'chunk_size' is smaller than
MLXSW_I2C_BLK_MAX and data is copied to the wrong offset, overriding
previous data.

Fixes: 6882b0ae ("mlxsw: Introduce support for I2C bus")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2017-11-01

1) Fix a memleak when a packet matches a policy
   without a matching state.

2) Reset the socket cached dst_entry when inserting
   a socket policy, otherwise the policy might be
   ignored. From Jonathan Basseri.

3) Fix GSO for a IPsec, GRE tunnel combination.
   We reset the encapsulation field at the skb
   too erly, as a result GRE does not segment
   GSO packets. Fix this by resetting the the
   encapsulation field right before the
   transformation where the inner headers get
   invalid.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The ASIC has the ability to generate events whenever a sensor indicates
the temperature goes above or below its high or low thresholds,
respectively.

In new firmware versions the firmware enforces a minimum of 5
degrees Celsius difference between both thresholds. Make the driver
conform to this requirement.

Note that this is required even when the events are disabled, as in
certain systems interrupts are generated via GPIO based on these
thresholds.

Fixes: 85926f87 ("mlxsw: reg: Add definition of temperature management registers")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Provide a mailing list for maintenance of the module instead.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For the time being I will be available in my private mail. Update both the
MAINTAINERS file and the individual modules MODULE_AUTHOR directive with
the new address.
Signed-off-by: Yotam Gigi <yotam.gi@gmail.com>
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function of_parse_phandle() returns a NULL pointer if it cannot
resolve a phandle property to a device_node pointer. In function
hns_nic_dev_probe(), its return value is passed to PTR_ERR to extract
the error code. However, in this case, the extracted error code will
always be zero, which is unexpected.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function netdev_priv() returns the private data of the device. The
memory to store the private data is allocated in alloc_netdev() and is
released in netdev_free(). Calling kfree() on the return value of
netdev_priv() after netdev_free() results in a double free bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that SK_REDIRECT is no longer a valid return code. Remove it
from the UAPI completely. Then do a namespace remapping internal
to sockmap so SK_REDIRECT is no longer externally visible.

Patchs primary change is to do a namechange from SK_REDIRECT to
__SK_REDIRECT
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fix 5987feb3 ("net: phy: marvell: logical vs bitwise OR typo")
uncovered another bug in the Marvell PHY driver, which broke the
Marvell OpenRD platform. It relies on the bootloader configuring the
RGMII delays and does not specify a phy-mode in its device tree.  The
PHY driver should only configure RGMII delays if the phy mode
indicates it is using RGMII. Without anything in device tree, the
mv643xx Ethernet driver defaults to GMII.

Fixes: 5987feb3 ("net: phy: marvell: logical vs bitwise OR typo")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2017-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.14

The most important here is the security vulnerabitility fix for
ath10k.

ath10k

* fix security vulnerability with missing PN check on certain hardware

* revert ath10k napi fix as it caused regressions on QCA6174

wcn36xx

* remove unnecessary rcu_read_unlock() from error path
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull power management commit reverts from Rafael Wysocki:
 "Since Geert reports additional problems with my PM QoS fix from the
  last week that have not been addressed by the most recent fixup on top
  of it, they both should better be reverted now and let's fix the
  original issue properly in 4.15.

  This reverts two recent PM QoS commits one of which introduced
  multiple problems and the other one fixed some, but not all of them
  (Rafael Wysocki)"

* tag 'pm-reverts-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "PM / QoS: Fix device resume latency PM QoS"
  Revert "PM / QoS: Fix default runtime_pm device resume latency"

IB device index is nldev's handler and it should be checked always.

Fixes: c3f66f7b ("RDMA/netlink: Implement nldev port doit callback")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Doug Ledford <dledford@redhat.com>
[ Applying directly, since Doug fried his SSD's and is rebuilding  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 0cc2b4e5 (PM / QoS: Fix device resume latency PM
QoS) as it introduced regressions on multiple systems and the fix-up
in commit 2a9a86d5 (PM / QoS: Fix default runtime_pm device resume
latency) does not address all of them.

The original problem that commit 0cc2b4e5 was attempting to fix
will be addressed later.

Fixes: 0cc2b4e5 (PM / QoS: Fix device resume latency PM QoS)
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This reverts commit 2a9a86d5 (PM / QoS: Fix default runtime_pm
device resume latency) as the commit it depends on is going to be
reverted.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ath.git fixes for 4.14. Major changes:

ath10k

* fix security vulnerability with missing PN check on certain hardware

* revert ath10k napi fix as it caused regressions on QCA6174

wcn36xx

* remove unnecessary rcu_read_unlock() from error path

We reset the encapsulation field of the skb too early
in xfrm_output. As a result, the GRE GSO handler does
not segment the packets. This leads to a performance
drop down. We fix this by resetting the encapsulation
field right before we do the transformation, when
the inner headers become invalid.

Fixes: f1bd7d65 ("xfrm: Add encapsulation header offsets while SKB is not encrypted")
Reported-by: Vicente De Luca <vdeluca@zendesk.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Fixes: 31c2611b ("selftests: Introduce a new test case to tc testsuite")
Fixes: 76b903ee ("selftests: Introduce tc testsuite")
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 7aa0045d ("net_sched: introduce a workqueue for RCU callbacks of tc filter")
I defer tcf_chain_flush() to a workqueue, this causes a use-after-free
because qdisc is already destroyed after we queue this work.

The tcf_block_put_deferred() is no longer necessary after we get RTNL
for each tc filter destroy work, no others could jump in at this point.
Same for tcf_chain_hold(), we are fully serialized now.

This also reduces one indirection therefore makes the code more
readable. Note this brings back a rcu_barrier(), however comparing
to the code prior to commit 7aa0045d we still reduced one
rcu_barrier(). For net-next, we can consider to refcnt tcf block to
avoid it.

Fixes: 7aa0045d ("net_sched: introduce a workqueue for RCU callbacks of tc filter")
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use l2tp_tunnel_get() in pppol2tp_connect() to ensure the tunnel isn't
going to disappear while processing the rest of the function.

Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull power management fix from Rafael Wysocki:
 "This fixes new breakage introduced by the most recent PM QoS fix in
  which, embarrassingly enough, I forgot to update
  dev_pm_qos_raw_read_value() to return the right default for devices
  with no PM QoS constraints at all which prevents runtime PM from
  suspending those devices (fix from Tero Kristo)"

* tag 'pm-urgent-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / QoS: Fix default runtime_pm device resume latency

It turns out that some drivers seem to think it's ok to remap page
ranges from within interrupts and even NMI's.  That is definitely not
the case, since the page table build-up is simply not interrupt-safe.

This showed up in the zero-day robot that reported it for the ACPI APEI
GHES ("Generic Hardware Error Source") driver.  Normally it had been
hidden by the fact that no page table operations had been needed because
the vmalloc area had been set up by other things.

Apparently due to a recent change to the GHEI driver: commit
77b246b3 ("acpi: apei: check for pending errors when probing GHES
entries") 0day actually caught a case during bootup whenthe ioremap
called down to page allocation.  But that recent change only showed the
symptom, it wasn't the root cause of the problem.

Hopefully it is limited to just that one driver.

If you need to access random physical memory, you either need to ioremap
in process context, or you need to use the FIXMAP facility to set one
particular fixmap entry to the required mapping - that can be done safely.

Cc: Borislav Petkov <bp@suse.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Tyler Baicar <tbaicar@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull MMC fixes from Ulf Hansson:
 "A couple of MMC host fixes intended for v4.14-rc8:

   - renesas_sdhi: fix kernel panic
   - tmio: fix swiotlb buffer is full"

* tag 'mmc-v4.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: renesas_sdhi: fix kernel panic in _internal_dmac.c
  mmc: tmio: fix swiotlb buffer is full

Pull crypto fix from Herbert Xu:
 "This fixes an objtool regression"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/chacha20 - satisfy stack validation 2.0

Revalidating the disk needs to set the logical block format and capacity,
otherwise it can't figure out if the users modified anything about
the namespace.

Fixes: cdbff4f2 ("nvme: remove nvme_revalidate_ns")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The recent change to the PM QoS framework to introduce a proper
no constraint value overlooked to handle the devices which don't
implement PM QoS OPS.  Runtime PM is one of the more severely
impacted subsystems, failing every attempt to runtime suspend
a device.  This leads into some nasty second level issues like
probe failures and increased power consumption among other
things.

Fix this by adding a proper return value for devices that don't
implement PM QoS.

Fixes: 0cc2b4e5 (PM / QoS: Fix device resume latency PM QoS)
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>